RH10 - WebHelp, SSL, Navigation Toolbar Options. Is there a way to choose no default?

I have one group that's requesting their output to have a collapsed left hand navigation pane (i.e., no TOC/Index/Gloss/Search identified as default).
While I've shown the requestors HOW to collapse (click the "X"), they want it gone by default. I know we could always go Traditional - No Skin.. but we could also write content in Latin, too.
So, is there a method to choose "None" as the default toolbar for a defined Single Source Layout (even outside the WebHelp Options GUI)?

Yes there is but you'd have to ensure your content has the necessary navigational links to enable users to get around the content without a TOC, index or search. In the WebHelp SSL click on the Navigation dialog and deselect all the toolbar butons.

Similar Messages

TS3274 When viewing pick lists from different web sites my iPad2 selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?

When viewing pick lists from different web sites my iPad 2 (safari) selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?

With your playhead over the clip in the timeline and that V track's 'track selector' as the only one active...hit the 'f' key.
This will load the original clip into the viewer at the matching point of the frame in the timeline.
K

I've made a very short movie and would like it to play over and over on my iTouch 4 until I'm done but there is no loop or repeat option Is there any way to do this?

I've made a very short movie and would like it to play over and over on my iTouch 4 until I'm done but there is no loop or repeat option Is there any way to do this?

Maybe here:
http://scottlinkblog.wordpress.com/2010/03/23/looping-video-on-an-ipodiphone/
Try Googling for more solutions.

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Is there a way to set a default solution .runsettings file in VS2013?

This is a question my coworker asked over on StackOverflow
[here], but hasn't received a single comment or answer. Thought I'd repost it here since I know the VS guys are more likely to see it here...
I'm using VS2013 with the built-in unit test framework. I've created a .runsettings file that sits in the Solution Items folder. When I select Test -> Test Settings -> Select Test Settings File, I am able to choose my .runsettings file and it works
as expected.
When I exit out of VS2013 and then re-load the project, I have to re-select the .runsettings file. Is there any way to set the default .runsettings file at solution level so it gets persisted?

Hi,
I can’t get your issue on my side(VS2012 Update 4 machine and VS2013 Update 1 RC machine). If you are using VS2012, please upgrade it to VS2012 Update 4. If you are using VS2013, please upgrade it to VS2013 Update 1 RC.
When I restart VS and re-load the project, the .runsettings file is still selected
with the Select Test Settings File menu option and .runsettings file is still used when I run the unit test.
I doubt that there is anything wrong with your VS. As I mentioned above, please reset your VS settings through Tools->Import and Export settings->Reset all settings…
If no help, try some other devenv commands to fix:
1.devenv.exe /safemode
2.devenv.exe /resetskippkgs
3.devenv.exe /installvstemplates
4.devenv.exe /resetuserdata
devenv.exe can be located under your VSlocation/Common7/IDE
What your need is to put it to run prompt and add commands to it.
If the issue still exists, please repair or reinstall your VS.
Meanwhie, if you have some anti-virus software running when you work with VS, please close them to check the reuslt.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is There Any Way To Choose To Sort By Name and Pick a Background Color in Finder?

Is There Any Way To Choose To Sort By Name and Pick a Background Color in Finder? I've noticed in Finder's View Options that I cannot choose to sort by name and have a background color in icon view. I've done a search in discussions and someone else mentioned this as well.

To sort by name.....
Open the finder window, then select the "change the item arragement" button. Choose name from the drop down.

Is there a way of choosing ONLY vertical or horizontal?

Hi,
Is there a way of choosing only the vertical shots, or horizontal shots?
Thanks!

Use the Sort: Aspect Ratio option and all horizontal/vertical images will be grouped.

When using two iPhones (iOS 5) on the same computer/iTunes Is there any way to choose which songs, contact info., etc. are sync'd to each device?

When using two iPhones (iOS 5) on the same computer/iTunes Is there any way to choose which songs, contact info., etc. are sync'd to each device?

For each iPhone...
From the Summary tab select: Sync only checked songs and videos.
Under Options in the Summary tab select: Sync with this iPhone over Wi-Fi
If you want you can select: Manually manage music and videos.
Select the music you want synced from your iTunes library, same with Contacts.

Is there any way to specify the default version of LabVIEW?

I have a sinking feeling that the answer to this question is "no." With more than one version installed, is there any way to set the default LabVIEW version for opening a VI? I have both 7.1 and 8 installed, and usually only use 8 to open an example or look at something posted here. When I do that, it resets all the OS hooks so that the default action for opening a VI is to open it in version 8. I've even gone so far as to create actions to open files in 7.1 and 8, but it always resets my default action.
I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
Ugh. I hate it when software thinks it knows what I want better than I do.

eaolson wrote:
I have a sinking
feeling that the answer to this question is "no." With more than
one version installed, is there any way to set the default LabVIEW
version for opening a VI? I have both 7.1 and 8 installed, and usually
only use 8 to open an example or look at something posted here.
When I do that, it resets all the OS hooks so that the default action
for opening a VI is to open it in version 8. I've even gone so
far as to create actions to open files in 7.1 and 8, but it always
resets my default action.
I found this KB article for when version 7 came out, but it's suggestions don't seem to work with 7 and 8.
Ugh. I hate it when software thinks it knows what I want better than I do.
Add
in the LabVIEW.ini file of those versions you do not want to rewrite
the registry on startup to point to themselves for VI files, the
following:
RegisterExtensions=False
Of course the VersionChooser utility mentioned earlier is even more convinient.
Rolf Kalbermatter
Message Edited by rolfk on 06-28-2006 08:21 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Is there any way to set the default for *.doc document so that Pages opens them automatically?

I have a number of Ms Word documents because I used to have Word for Mac before the last OS release. Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
Now Pages will open these files. Is there any way to change the default for *.doc files so that a double-click will open them in Pages?
(Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
Walt

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Is there a way to set a default wifi network for my iPhone 5s?

Hi,
I have two networks in my home. When I first walk in, my phone automatically recognizes my extended wifi network. But since I tend to spend most of my time in the back of the home, I rather have it connect to that network.
Is there a way to change the default?
And no, I can't move the AirPort Base or AirPort Express due to the way the cable is in my home.
Thank you in advance (hope I used the correct terminology).

I have an Airport Extreme upstairs with my computer plus an Airport Express downstairs. They are both defined to be on the same network with Airport Utility. My mobile device use which ever one is giving them the best signal even when I am down in the basement.

Apple Mail, is there a way to change the default time-out?

This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
Things I have tried:
I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
Any help would be appreciated.
Kraig

I already thought of that one. I deleted my account from there. But it didn't default to the other one. It just told me I needed to add an account. Thanks tho

Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

Is there any way to change the default font for outgoing text-messages, in "Messages"?
I can change it for one conversation, but then it resets to the default, tiny font.
The preferences menu only lets me change the conversation font.
(OSX 10.10)

Hi,
As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
Changing the Font would involved editing the Balloon.transcript file.
10:34 pm Saturday; December 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Is there a way to change the default angle for effects or a quick way of selecting 90 or 180 without typing in numbers?

is there a way to change the default angle for effects or a quick way of selecting 90 or 180 without typing in numbers?

The app developer chooses the alert sound, or provides a way for you to change it.

RH10 - WebHelp, SSL, Navigation Toolbar Options. Is there a way to choose no default?

Similar Messages

Maybe you are looking for