RH11 404 - Page Not Found when linking to PDF file from search results using IE9 and IE10

I'm using RH11 (11.0.3.268) and I've included a number of PDF files as baggage files. The hyperlinks on the pages work fine and display the PDF files in a separate window, as expected. However, when searching for these same PDF files using the Search tab, I'm getting a 404 error with the filename. The description on the error shows the filename and says the "the requested resource is not available." This is occurring using IE9 and IE10. And, it only happens within the application, which packages the WebHelp with a war file.
I searched the forum and found where someone was having the same problem on Firefox, but was fine on IE. But, as mentioned, I'm finding it on IE.
Thoughts on how to fix this error?

Is the WAR file extracted at the point when the search is done? If not, I would expect it to fail.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Unable to open pdf files from search results page in Office 365 site

Hi folks,
I am getting this issue since a while now. In office 365 site, if I click on links that points to pdf files in search results page, I get this -
“The filename, directory name, or volume label syntax is incorrect”.
These pdf files are stored in the same site and I am able to open them in adobe reader directly from the document library but not from the search results page.
I have already gone this post and doesn't help me -
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/545efcc6-b748-4df8-aee0-7f57f778ad1e/sharepoint-2010-opening-pdfs-in-search-results-the-filename-directory-name-or-volume-label?forum=sharepointgeneralprevious
Any help or pointer is much appreciated.
Thanks,
Manvir
Manvir

Hi，
Besides pamma has suggested, here are similar issues, you can take a look at:
http://unsolicitedbutoffered.blogspot.com/2014/01/quick-fix-volume-syntax-error-when.html
http://crowdsupport.telstra.com.au/t5/T-Suite-Applications/There-was-an-error-opening-this-document-The-filename-directory/td-p/197425
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Why HTTP 404 Page not Found when trying to Backup Configuration?

Good day:
I bought this RV082 VPN Router. After configuring it, I tried to save its configuration using the System Management's Backup Utility. When I set everything up and ready to proceed, as I click on the Backup Configuration button, I get this Page Not Found error.
After several additional retries, and cold startup of my laptop, I still get this.
Then I wondered, "Why don't I try to upgrade the firmware instead?".
Guess what: I get the same page not found error.
Can anyone tell why is this? Using Windows 7 Pro 32-bit.
Thanks in advance!
Javier.
P.S. I have replied to another thread about not getting connected with Quick VPN to the RV082, which is another painful trouble I've got with it.

Hi Rybak,
Thanks for your reply.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
If clean Cache cannot resolve this issue, please try to repair your TFS 2013 Update 4 Server, then check the result.
Additionally, you can run TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Dreamweaver reports file "not found" when attempting to open files from SMB server...

User's work-files are hosted on a Windows Server 2003 SP2 volume accessed via SMB. She's been opening and saving the files from the server successfully in Dreamweaver for years from other Macs running Dreamweaver CS4.
Now she has an iMac running 10.7.4 and Dreamweaver CS6... and it's not the SMB problem you'd expect.
She mounts the server volume. She opens and saves files normally with full r/w permissions from any app... except Dreamweaver. For any file that she attempts to open in Dreamweaver -- whether from the Finder or from within Dreamweaver -- Dreamweaver pops up an alert reporting that the file at the file-path was not found. The same file is easily accessible from other apps and from the Finder. She continues to have full read/write access to the shared volume.
Local copies of the files do not have the problem. It only affects files hosted on the server and it only happens in Dreamweaver.
So, I create a new user account and everything works fine... The user mounts the sharepoint, opens a file with Dreamweaver... perfectly normal. Then she quits Dreamweaver and relaunches it... everything's fine. Repeatedly. It all works normally. She quits Dreamweaver and unmounts the share, then she mounts the share again and tries to open a file in Dreamweaver again... and it reports that the file was not found.
This is reproducible: If the server volume has been mounted and unmounted repeatedly under any user account, that triggers the error which continues occurring under that user account from that point on. A restart will not fix it. A safe-boot will not fix it. (In fact, restarting seems to trigger the problem by unmounting the volume.)
I tried trashing the entire contents of the ~/Library folder in one of the test-user accounts. It doesn't fix the problem. Once it strikes a user account, the only temporary fix seems to be using a new user account. And that's like a ticking time bomb just waiting for the problem to pop up again.
Any ideas?
TIA!!

I've seen on two computers so far. Looking at the mount point under unix, the share is being mounted at two different locations. This is normal behaviour for Macs when you mount two different shares with the same name.
From terminal I run:
df
Which returns something like
/dev/disk0s2                           1951845952 224463456 1726870496    12%    /
devfs                                         360       360          0   100%    /dev
map -hosts                                      0         0          0   100%    /net
map auto_home                                   0         0          0   100%    /home
//[email protected]/website 204360384 38067872 166292512    19%    /Volumes/website
//[email protected]/website 204360384 38067872 166292512    19%    /Volumes/website-1
map -fstab                                      0         0          0   100%    /Network/Servers
Notice that the share "website" has been mounted once as website, and again as website-1. This is the underlying unix name for the share, which is how most programs (99% sure including Adobe suite products) will reference files. So, if it thinks that the file is at /Volumes/website/site/index.html but can only see /Volumes/website-1/ then it doesn't know what to do.
The confusion arises because both will show in Finder as "website". Even more annoying is that Finder does not always unmount shares correctly, so that /Volumes/website might not be accessible but /Volumes/website-1 will be. As far as the user is concerned, the share "website" is still mounted, but as far as Dreamweaver is concerned, it isn't, although website-1 is.
It's the same share, same data, but is being referenced by different names, so does not seem accessible.
BUT
I don't have a solution yet, apart from force unmounting both (or rebooting), remounting, and checking that Dreamweaver is using the right share (perhaps by removing and readding from within Dreamweaver).
Tedious.

Inside a normally loaded webpage I get Yahoo! 404 -Page not found when trying opening linked articles inside the site. Really annying

search redirected to http://search.yahoo.com/404handler?

Why are you publishing to a folder? You only need to do this if you are uploading directly to the domain webspace and you need an ftp client to do this such as Cyberduck.
CNAME is only used if you are publishing the site to a MobileMe account and you are forwarding the domain to your MMe account?
What is it that you are doing?
If using CNAME, then you need to go to your MMe account and enter the domain name under the personal section, enter personal domain. Then publish your site and then go to your domain name registrar and go to the DNS settings and set the CNAME up to forward to web.me.com.
If you are using CNAME forwarding, then from within iWeb you need to click on Publish All to MobileMe and NOT TO A FOLDER. The folder option is ONLY if you are uploading directly with ftp to your domain space.

404 Page not Found (Object Links)

I am trying to get object links working in EP 6.0 SP11 I have read all the previous postings and tried applying the ones that were applicable. I have assigned the servicemanager role on both the portal and crm side. Here is the link that is generated when I try to open a business partner:
http://portalserver:50000/roles/com.sap.pct.crm.ServiceManager/AccountsProducts/nf/nf_2/MaintainAccounts?DynamicParameter=CRM_OBJECT_TYPE%3DACCOUNTCRM%26CRM_BOR_TYPE%3DBUS1006%26CRM_OBJECT_ID%3D0000000032%26CRM_LOGSYS%3DCR2CLNT400%26sap-syscmd%3Dnocookie
I think the first part of the link is wrong from "http://portalserver:50000/roles/com.sap.pct.crm.ServiceManager/AccountsProducts/nf/nf_2/MaintainAccounts"
Can anyone shed some light on what the correct link should be? Should there be a /irj/portal after the port? Should there possible be another directory between the port and "/roles"?
I guess my main question is, if I wanted to create a direct link to this MaintainsAccounts iview, how do I figure out the direct URL to it?
Appreciate any help and will reward points...
Thanks

Hi,
The link should be server:50000/irj/portal?NavigationTarget=/roles/com.sap.pct.crm.ServiceManager/....
This issue is resolved by changing helperservice.par in SP9.As I mentioned in my previous posts,I am not sure it's resolved in SP11 or not. You can upgrade to latest version of portal or compare the helperservice.par in oyur system.
Regards,
Abdul raheem S

Downloading Adobe Reader from distribution licence link - 404 page not found

I have recently applied for the Adobe distribution licence for Adobe Reader. This was successful, shortly after applying I received an email with the licence attached and a download link for Adobe Reader XI, The problem is the link doesn't work I just get 404 page not found, the link I cannot put on here as the licence will be broken.
For full installers:
To download the English language version of Adobe Reader XI with Acrobat.com in compressed .exe format, click here.
You may not share the above link, share information with others, or publish the above link on websites, blogs, or by any other means that can be publicly accessed. The information contained on this site is meant for your use only in accordance with the Adobe Reader Distribution License Agreement you accepted. You may direct others to http://www.adobe.com/products/reader/rdr_distribution1.html to request distribution rights.
What i need to know is can anyone (from Adobe) send me a replacement link, can I re-apply for the licence to get another link or even better under this licence can I download the software from Adobe - Adobe Reader download - All versions instead. I have contacted Adobe chat support who directed me to phone support, phone support flat out refused to help and said the only support would be via this forum.
Hopefully someone here can answer my questions.
Thanks all.

Brilliant thanks, I see nothing wrong with downloading from here, it even states "In order to distribute Adobe Reader software you need to have a valid Adobe Reader Distribution Agreement in place" which I do.
Thanks again ~graffiti

Wwv_flow.accept, error 404 page not found

I am trying to install the OEHR Sample Objects for the Hosted Demo environment at apex.oracle.com site so I can do the Oracle Application Express 2 Day + Tutorial. I downloaded the zip file and got the .sql file extracted ok. The import works ok for the application, but hangs when trying to load the Supporting Objects. It eventually gives me that nasty old error 404 page not found when on MS windows 2000 and IEexplorer 6 ( and a similar result in xp using IEexplorer 7).
I cannot do much in the tutorial without the samples.
Any ideas, anyone else gotten stuck here? Thanks

Dimitri,
Many thanks for the reply.
The problem appears to be intermittent and can happen on, quite literally, any link or button. Anything which causes either a page submit or link through to another page is a likely candidate. And this isn't just whilst running the app - it's within the app design part, too. It seems to be an issue (possibly) with page delivery.
My gut feeling is that it seems to happen more after the DB has been up for a while. However, this may just be a matter of perception as I've also had it happen within minutes of a DB restart.
I'll have a play around with apex.oracle.com, but my suspicion is that the Oracle site works fine (this would be a far more visible error if it happened on apex.oracle.com, too).
One thought is that it might be an EPG config issue - it'd be interesting to check the config of an Oracle-supplied Apex area, if that were possible. Another thought is that it could be the network, though (typically) everything else on the network appears to be running fine...
Many thanks,
David

Download Photoshop CS3 from Adobe when I click the link I am getting http 404 page not found.

I have a copy of Photoshop CS3 on my old Macbook. Need to move to my new Macbook with no CD drive. Following instructions it says to download CS3 and enter serial number. When I attempt to download from Adobe and click the link I am getting http 404 page not found.

Download CS3 products
Works for me. If there are issues, use another browser and check your network configuration.
Mylenium

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

404 page not found in one sub link of SharePoint Site

We have an SharePoint 2010 Farm (a single farm), it was disconnected by accidentally, I reconnected it successfully through config wizard, but as I tested each site in the farm, and found one of links on a site was gave 404 page not found error. The
site (http://xxx:200/default.aspx) is working and other links on this site are working only one link is showing 404 error, I've checked
1) Eventview, nothing related
2) SharePoint Log, nothing related,
3) IIS, running fine since the site is up,
4) checked at CA, site collection and web application are all good.
Where else I should check?
Any help would greatly appreciated.

which link is throwing the error, could you please mentioned that?
Do you have any custom /farm solution deployed into the farm, if yes make sure the solution is sucessfully deployed.
Also make sure if there is any customization which required to that page , still there.
Try to detach the content DB and reattach it.
also try to reset IIS.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Integration Directory : getting 404 Page not found error while accessing In

Hello,
When i am trying to open the Interation Directory, it is showing me 404 Page not found Error.
Some Description
- Executing sxmb_ifr,
- From http://erpsys07:50300/rep/start/index.jsp,i am getting mentioned error when i am trying to access Integration Directory from URL.
erpsys07 -> Central SLD -> J2ee Port - 50100
erpsys07 -> PI system -> J2ee Port - 50300
When i am clicking on integration directory link, it is pointing to Central SLD J2ee Port (50100) instead of 50300, it is pointing to
http://erpsys07:50100/dir/start/sso/Directory.jsp instead of http://erpsys0750300/dir/start/sso/Directory.jsp.
Could some help me where to change and what to change?
Thanks,
V.SINGH

Have you checked port in Netweaver Administration?
See which port is mentioned there. (If you are using PI 7.1)
Check in SXMB_ADM transaction, and in your RFC Destination, where it is pointing.
Thanks,
Hetal
Edited by: hetal shah on Nov 24, 2009 4:49 PM

HTTP 404 page not found error !! on tabs

Hello All,
I am having a page with multiple tabs . When the user navigates from one tab to another tab ( using standard tab set ) from interactive report I am getting the HTTP 404 page not found error .
The tabs are in the following fashion.
home page#1
varlist page#2
criteria page#7
dynamic report page#10
interactive report page#15
I can move forward by selecting the tabs but when i am in interactive report tab and select any of the other tabs i am getting HTTP 404 page not found error..
Can any one help me .
thanks/kumar
Edited by: kumar73 on May 5, 2010 2:45 PM
Edited by: kumar73 on May 5, 2010 2:46 PM

Hello Jarola / All,
Selected Pseudo Parent Tab: TS1
Select Standard Tabs: DBTable, variables , condition , Report , interactive report.
When I am navigating from tab interactive report to any other tab the url is chaning to
http://cosmo:8080/apex/wwv_flow.accept - resulting in HTTP 404 page not found error ..
but when navigating with in the following tabs
DBTable page#1
variables page#2
condition page#7
report page#10
I am having different url like example -
http://cosmo:8080/apex/f?p=125:7:1075354762414252::NO
Can any one tell me why i am unable to navigate from interactive tab to other tabs ..
================================
I uploaded the applicatoin in oracle.apex.com
http://apex.oracle.com/pls/apex/f?p=29558:1:3623891857047276:::::
please find the link above .
===================
The database tables are huge and inorder for me to replicate at oracl.apex.com I got to load the full schema which is not possible . May be you can go through the code to understand whats going wrong.
thanks/kumar
Edited by: kumar73 on May 6, 2010 6:46 AM
Edited by: kumar73 on May 6, 2010 1:00 PM
Edited by: kumar73 on May 6, 2010 1:01 PM
Edited by: kumar73 on May 6, 2010 1:04 PM
Edited by: kumar73 on May 6, 2010 2:46 PM

APEX Upload file feature resulting in 404 Page Not Found error

Hi,
I have a page where the user selects the local file to upload and submits it to another page. It has been working fine for the last few years. Yet recently when there's a submit with the file for upload, it says "404 page not found" regardless of which page it branches to. If I leave the file upload field blank, it doesn't have that problem.
Any advice? Thanks.

Hi,
have a look at http://www.inside-oracle-apex.com/oracle-apex-got-404-not-found-2/ to get the reason of the 404 error. If you are using the Embedded PL/SQL Gateway (EPG) have a look at the comments where I link to a description what you have to do for EPG.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

Application returns a "404 Page not found" error

Application returns a "404 Page not found" error when attempting to use any of the Download links. What is the exact problem?
Can anybody tell me how to resolve this problem?
David

http://nnnnnn.nnn.nnnnn:99/pls/apex/f?p=88:52:2181500142828824:FLOW_EXCEL_OUTPUT_R35183980327530985_en-us
It looks like this.
Thank you.
David
Edited by: user628655 on Sep 30, 2009 6:37 PM

RH11 404 - Page Not Found when linking to PDF file from search results using IE9 and IE10

Similar Messages

Maybe you are looking for