RH11: Glossary and Index do not display in generated output

I am having such a tough time with RoboHelp. My current issue is the glossary and index not appearing in the generated output. They used to. However, yesterday I thought I should go in and clean out all the junk in my project, i.e. I had about 5 glossaries and 5 indexes because I was testing things out. I made sure I didn't delete the populated glossary and index, but by the end of the day, they were both gone. So, I located these again from a backup and imported them back into my current project. Everything is there...all my terms and definitions, the index and the links...blah blah. NOTE: Everything is there, but I was required to block it out due to privacy issues.
However, this is how it now displays when I generate: Why won't this populate?
Thanks,
Pam

Rick,
I'm using IE 10, Version 10. And everything was working fine until I started deleting the extra glossaries and indexes I had in my project. I have been generating locally, then when I get to a point where I'm satisfied with my changes, I generate to the server. I wasn't having a problem with this until I deleted those files. Although I have imported the glossary and index back into the project, still nothing. Now, even if I pull up an older version of this same project, the glossary and index are now gone from that too. I'm assuming that everything must be linked, but I can't figure out what I'm missing. Generating to Chrome has the same issues. I had one of my developers look at it yesterday, and he thinks there is some file missing somewhere that RH11 needs to generate the glossary and index. What file would I be missing? The .glo and the HHK files are in the project. I really need to upload this for the client, so any help you can give me is much appreciated.
I read on one of the forums that I should have this ticked in the Optimization Settings for Responsive HTML: "Limit the scope of project styles only to topic contents". I did that and it caused all kinds of other issues.
On Monday I updated to RH 11.0.1 - would there be an issue with that? Is it a dll issue?
Thanks Rick,
Pam

Similar Messages

Chinese and Korean characters not displaying in navigation pane

I have an issue with Chinese and Korean characters not displaying on the tabs in the navigation pane:
I have 2 RoboHelp projects (using RoboHelp 8 with the updates installed) to generate WebHelp, one in Simplified Chinese, the other Korean. The HTML files, .HHC and .HHK were sent out for translations. I have set the appropriate language in the project settings, everything almost works, except for the text on the Contents, Index, and Search tabs. (I'm not using a skin.) I have read in various threads that the lng file should be edited using the RoboHelp interface, and this seems to be the crux of the problem. The characters do not display correctly through the RoboHelp UI.
The computer on which I generate the WebHelp is Windows Server 2003, and I do not have the language packs installed. (And am having problems getting hold of the language packs to install to see if this fixes the problem.)
Aside from installing the language packs, is there anything else I can try to help resolve the problem? (The characters in the content are displaying as expected.)
Any assistance is greatly appreciated

Perhaps something in the Translation Info section of this page might help? (The specifics are for Japanese, but I believe the issue would apply to all double-byte languages).
http://helpware.net/FAR/far_faq.htm#JapComp

Excise Duty, Cess and Secondary Cess not displaying in J1IIN

Dear Frnds,
I need a solution for Excise Duty, Cess and Secondary Cess not displaying in J1IIN ( WHILE EXCISE ) but in Invoice it is calculated correctly., ( ie., i need CENVAT Posted, not utilized
after excise invoice generated )
kindly suggest me...
Thanks & Regards
T.Arulvanan

HI.
Plz check the forllowing settings,
IMG - Logistic General - Tax on Goods Mvt - India - Basic Settings -
1. Maintain Excise Registrations -
Check Proper Indicator for Cess and other settings.
2. Maintain Company Code Settings
3. Maintain Plant Settings
4. Maintain Excise Groups
5. Maintain Series Groups
6. Maintain Excise Duty Indicators
-- Determination of Excise Duty
7. Select Tax Calculation Procedure
--Condition-Based Excise Determination
8. Define Tax code and assign it to company code
Properly maintiain fallowing settings and try again..
Prashant

I purchased a movie via Itunes and it does not display as a purchased item on my Apple TV yet A TV show I bought does.

I purchased a movie via Itunes and it does not display as a purchased item on my Apple TV yet A TV show I bought does. The only way I can view it is if I turn on home sharing and the movie is downloaded to my PC. Is this normal?

Welcome to the Apple Community.
Perfectly normal, purchased items only applies to TV shows, the studios have not licensed movies for redownloading.

Info Record Text and Material Text not displayed in Subcon. PO printout

Hi,
I have this scenario, where the Info record text from Info Record PO text does not appear in Print out but appears in Print preview.
Also the Info record text for standard Purchase order is displayed in Print preview and Print output.
The config settings for texts for Purchase order is the same for Purchase order with no Item Category (Standard) and Subcontracting (item category L).
Also the texts in Purchase order automatically copies in Standard purchase order (adopt button not present) but not in Subcontract purchase order (Adopt text is present).
I have checked the config for copying rule, for Info record text is automatically adopt.
I am unable to identify the missing config for this.
Also the same problem exists for Material text from Material Master PO text is not displayed in Fax output but appears in Print output.
Please let me have your inptus,
Regards, Muthuvel

The solution to this is SPRO->SAP Reference IMG->Materials Management->Purchasing->Messages
->Text for Messages->Define Text for Purchase Order.
Select Texts for Document Item folder - There will be a list by Document Type and Item Category. Make sure there are entries for your combination, otherwise they will not be part of the output message.

HT1430 my iphone 4 has suddenly ceased to work with a full battery and switch will not display slider. How can I reactivate it?

My iphone 4 has suddenly ceased to operate with a full battery and switch will not display slider. How can I reactivate it? Is the memory gone? Will T Mobile replace the memory or the phone if necessary?

Hello,
If you're in a country where there's an apple shop (unfortunately not mine), go check it and ask the employee about it: he's gonna check your Iphone on a "device"
I've got an iphone 5 and it's working very well with me but I have to admit that its battery lasts (slower) than my Ipad 2.
Still i can help with some tips that may improve your iohone's battery by an hour in addition (hopefully):
- close all apps by multitasking....
- do NOT keep the brightness to the max
Believe me you're gonna regret changing your phone to a samsung
Hope i've helped and sorry for my bad english (has english as 3rd language)

HT4157 I have an iPad 2 and it does not display the cellular data button under settings

I have an iPad 2 and it does not display the cellular data button under settings. It does display a Bluetooth button in its place. I have tried the reset but no luck

Is the iPad the Cellular version? Does it have an active Data plan? Does it have a Sim card installed in inside it?

Firefox and Twitter and Finder does not display

I have recently upgraded to Lion recently. The Transition was way rougher compare to the Snow Leopards.
I am running a MBP 15", 2009 Mid-2009 version.
It has 2 graphic cards on board, 9400m and 9600GT.
When I first launched Lion, I was quite shock that my Firefox and Twitter do not display at all.
After tweaking the system preferences, I realized that when the 9400m graphic card is activated, there isn't any display on several of the Applications,
including the popular ones like Finder, Twitter and Firefox. The issues are fix when I switch to my 9600GT graphic card.
Do any of you have the same issues that I am facing?
I do hope Apple resolves these issues quickly.
As using my 9600GT graphic translate to very bad battery life and a very warm laptop! I am not happy at paying $29.99 for something that breaks.

Hey kennychan,
I've had the same problem. I've done a clean re-install on a reformatted drive and the problem was gone. If you can do a clean reinstall I recommend you give it a shot.
Best wishes,
Dmitry

I have placed a photoshop file within a new picture and it will not display

i have placed a psd file within a new psd file and it will not display. It flashed on the screen for a moment and then disappeared, and no matter how many times I try, it will not show

I started a new file, placed the image and the screen went into a bizarre pattern. I ended up closing the program and starting fresh and it worked properly. Something went wonky during the session I guess.

Street and Country are not displaying on the Form

Hi all,
Does anyone know why the STREET and COUNTRY is not displayed on form?
I have debugged into SAPscript, the value for REGUH-STRAS and LV_REGIO is there, but somehow it just cannot display on the form.
/ &REGUH-NAME1&</></>
/ &REGUH-STRAS&</></></></>
/ &REGUH-ORT01&</></></></></></>
/ &REGUH-PSTLZ&</></></></></></></></>
/ &LV_REGIO&</></></></></></></></></></>
Please advice and thanks in advance.

Hello,
Use Condence symbol 'C' in the respective fields.
&REGUH-STRAS(C)& / &REGUH-ORT01& / &REGUH-PSTLZ& / &LV_REGIO(C)&
Regards,

PSE11 and 12 will NOT display a JPG i open..... this just occured- have no idea why - please help??

PSE11 and 12 will NOT display a JPG i open..... this just occured- have no idea why - please help??

All JPEGs or a particular one?

F1 and screen painter not display in IE 7.0

F1 and screen painter not display in IE 7.0
my CRM infomation
basis 610 sp 39
kernel 640_ex2
my notebook
window XP sp2
Internet Explorer 7.0
SAP GUI 640 patch 31
SAP GUI 710 patch 7
I try GUI 640 and GUI 710
but sap help and screen painter not display
I aleady apply vbscript http://support.microsoft.com/default.aspx/kb/556050
how can i solve the problem ?
Edited by: Lee Jun Seok on May 21, 2008 1:41 PM
Edited by: Lee Jun Seok on May 21, 2008 1:41 PM

Hi,
Yes, even I had lot of problems with IE7 finally i had to instal windows XP all over again with IE6. Please note that even if you downgrade from IE7 to IE6 without installing windows all over again you will still get problem. the best and only solution is to instal windows from scratch and please ensure that the CD that you have instals IE6 and not IE7 because the CD that I had installed IE7 with XP therefore I had to get another windows XP with IE6 and had to create recovery disk before so that I do not have to run around for drivers later.
Hope this helps
Regards,
Deepak

Material num and Plant is not displaying in Output

hi
i have written this code to get all inspection types...
while compiling im getting the correct output...
it is displaying only inspection types ....
Material num and Plants are not displaying..
form PROCESS_DATA .
CLEAR: WA_FINAL,
 WA_QMAT.
MOVE IT_FINAL TO I_FINAL.
REFRESH IT_FINAL.
LOOP AT I_FINAL assigning <fs_fin>.
LOOP AT IT_QMAT INTO WA_QMAT where MATNR = <fs_fin>-MATNR.
 P_werks = <fs_fin>-werks.
IF SY-SUBRC EQ 0.
<fs_fin>-ART = WA_QMAT-ART.
APPEND <fs_fin>-ART TO it_final.
CLEAR WA_QMAT.
CLEAR wa_final.
ENDIF.
ENDLOOP.
ENDLOOP.

Hi
ya im getting correct values to <fs_fin>
now its displaying correct values bt in improper format
Mat num Plant insp type
100001 1210 05
100002 1320 01
 02
 03
 05
bt i want the output as below
Mat num Plant insp type
100001 1210 05
 02
 03
100002 1320 01

My firefox page is not connecting to network and also its not displaying the troubleshoot problems option?

my firefox page is not connecting to network and also its not displaying the troubleshoot problem option?

At the very least, I recommend you restart your router, (your internet box).
More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it? Did you do anything to change your setup, and if you did, what?

Font not displaying on Reports Output (RHEL 5) for 10g

Hi, I know I've posted a question in the past about a font not displaying on Report Output for my Arial, Arial Narrow, and Courier New fonts. I worked with Oracle Support and found that Metalink Note#261879.1 fixed my problem with those 3 fonts. I ran the scripts and now that part works great.
However, I have one font "ARIALUNI.TTF" that will not work. This is out specific barcode font we use. I've pushed it on Linux from my Windows by pushing it as a binary file to the ORACLE_HOME/guicommon/tk/admin/TTF directory. I even put it in the directory for TTF on Metalink Notoe 261829.1 and let it create the files, but it still doesn't find it when I ran a report that uses this font.
I tried using font subsetting via the uiprint.ali and make a reference but it still doesn't seem to work.
Is there something I'm missing that would cause any of these not to work. I thought maybe some files had to be created under the guicommon/tk/admin/AFM file directory but I'm not sure.
I just want to have my 2 or 3 reports that use this barcode to work. Once I get them, I'm done and all my font issues are resolved. Any help is appreciated.
Chris

They are probably a very old Type 1 font. Try checking the dates on the font files. Your best bet would be to get the OpenType versions of those fonts and install them.

RH11: Glossary and Index do not display in generated output

Similar Messages

Maybe you are looking for