RH6.1 + O81701(R3) -- no problem! =) (mind you that I'm just making a *practice DB)
I was going nuts with trying to install RH6.1 with O81701 (R3) the first time around since I would get some really wacky Java errors. Then I downloaded the linux817.tar tarball again and put it on CD, burned it and untarred it under my linux partition and all of those Java problems went away. So whatever you do, DON'T UNTAR AND BURN YOUR O8i 8.1.7.0.1R3 TARBALL UNDER WINDOWS!
Anyhow, after I do the normal steps of logging in as root following the commands specified in the Oracle for Linux Starter Kit specifies:
'groupadd oinstall; groupadd sysdba; groupadd sysoper; useradd oracle -d /usr/oracle -g oinstall -G sysdba,sysoper;'
'passwd oracle;'
'chmod 755 /usr/oracle; mkdir /usr/oraInventory; chown oracle.oinstall /usr/oraInventory;'
I log in as user oracle and...
Then I put in the environment settings into the ~oracle/.bash_profile as specified but I only input 3 settings incidentally:
ORACLE_HOME, ORACLE_BASE, & ORACLE_SID.
I log in as root again, 'bzip2 -dv' the JRE from http://www.blackdown.org underneath the /usr/local directory...then 'tar xvf' the uncompressed file, and finally make a symbolic link 'ln -s /usr/local/jre118_v3 /usr/local/java' ...
and then we're all set to install.
log back in as the user oracle (under X-window environment...I am using GNOME)
If you were smart you have untarred the tarball 'tar xvf' into your /usr/oracle home directory which results in a '/usr/oracle/Disk1' directory... go into the 'Disk1' directory and then type ./runInstaller and it should run without a hitch.... HOWEVER you must tell the OUI to NOT create a DB after it's finished installing since you have to gunzip and untar the 'glibc-1.2.3-stubs.tar.gz' file (kindly provided here: 'http://download.oracle.com/otn/linux/oracle8i/glibc-2.1.3-stubs.tar.gz' which is assumed that you have an OTN membership (it's free don't worry)) into your $ORACLE_HOME directory after the installation of the RDBMS files are finished.
after the long and very boring installation is finished, you must run the 'setup_stubs.sh' patch script AND be SURE to execute the other patches provided with the 'linux81701.tar' under (assuming you untarred the tarball underneath your ~oracle directory) '/usr/oracle/Disk1/patch'
There are two patches...'/usr/oracle/Disk1/patch/bug1538440' and '/usr/oracle/Disk1/patch/bug1542738' which each have their respective README files which are actually the patch scripts themselves. So I change directories into the 'bug1538440' directory and (under the Bourne shell or 'bash') do an 'export TOP_PATCH_DIR="."', then proceed to execute the script with 'sh README.1538440' which will tell you to execute the 'root.sh' script again which I did after I executed the 2nd bug patch script. I change directories into the 'bug1542738' directory and then execute the 2nd patch script with
'sh README.1542738' which alleved my woes when I tried to run 'dbassist' even after running the 'setup_stubs.sh' patch script since 'dbassist' REFUSES to run without running the 'README.1542738' patch.
More or less, I have had no major problems with O81701R3 this time which is incidentally my first time successfully installing it after many hairpulling, foot stomping failures. I am using a regular install straight from the RH6.1 ISO install and the JRE118_V3 from http://www.blackdown.org. 400MB swap partition, 20MB boot partition, and the rest is just '/' ...using a 9GB HD and 128MB RAM with a Celery 400Mhz...no overclocking, just standard.
making the DB took at least 3 hours... the JServer is pretty brutal on the CPU has a lot of files associated with its install..
I remind you once again that I am just installing Oracle for my own learning but if you benefit from this too, then I feel better.
Cheers.
null
gdgmacguy wrote:
Make that 2 in a million. I've not had any problems whatsoever.
Make that 3 in a million because I have also experienced no problems. Well, some set-up issues at first but that's typical of any new device I think. No screen issues, no reception issues (unless I intentionally try to wreck the reception by placing a house key over the antenna, which is a neat experiment but totally unnecessary if you are able to make calls by holding it like you would any other phone, what's the point?). I have made calls and everything is working great. I have a bumper on the way and an invisible shield full body protection from Zagg. Can't wait for those two things because right now I am holding like its the holy grail and if I drop it my life will end. Which it probably will because I would not be able to live with a cracked iPhone...but I digress.
Similar Messages
-
My IPod no longer shuffles songs within playlists that are clearly set to shuffle. It is about 3/4 full so I thought of maybe compressing the files to get more space. Do you think that is the problem and if that might help?
Storage space on the iPod would not affect shuffled playlists or playlist shuffling, though substantially full iPods may wind up skipping songs on larger playlists after a while, and require a restart. As for compressing the files themselves, you can automatically re-encode files to a lower bitrate by checking the box on the summary page when your iPod is connected to your PC/Mac.
As for the shuffle problem, after restarting your iPod (hold the center button and Menu for a few seconds, until the Apple logo appears), make sure you're telling the iPod to shuffle the songs in a playlist by repeatedly clicking the center button until the Suffle Menu comes up, then scroll to the right to turn it on. From that song forward, the playlists' contents should be shuffled every time the playlist ends, or is accessed from a new song.
Shuffle does sometimes turn itself off, I've found, so double-check the setting is still on. Also, iPods shuffle by randomly assigning a playlist order for your songs, which is different from traditional shuffle (on, say, iTunes or Windows Media Player, where the new song is determined at random upon the current track ending. The iPod only chooses a random order of songs when you shuffle, to conserve battery life and queue up songs coming up on the playlist in the event of a shock). -
I upgraded to lion, now that I am restarting my mac, it is asking for a password. mind you i never set a password in the begining.
So i used my start up cd and re set the password and restarted my mac only to be faced with the same delima. user password please.
I am currently in safe mode, otherwise I can't log on to mymac
Please help, anyonethank you to all who responded. the final line was that I had to reboot and loss all of my info.
this was per apple store intelligence. -
My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync. -
Sir,
I bought iphone 4 in US.last 6 month me and other person not able to listen properly the voice because the voice is cracking.i have called earlier about the above problem and they said to upload the new verson 6.1.3 and it will be done but after loading this version still i am facing the same problem.so ,i would like to request you that please solve the above problem as soon as you can.I will be thankful to you.i love my apple Iphone.
waiting for your earliest reply.
thanks
Rajeev GuptaHello sir
As you know about my iPhone 4 which has a problem of voice cracking so I would like to replace to other phone like IPhone 5s.I will pay the replacement charges immediately.i am reaching miami on 19th of janvary 2014 so I would like to request you please arrange my appointment on the Apple store,dadeland mall ,miami at 15.00pm as I will reach miami at 13.00pm and my flight to India at 19.00pm.
Last time you told to replace at miami on 26th of September but without oppoimtment they have not entertained me.so I would like to request you that please arrange my appointment this time
I will be thankful to you
Rajeev Gupta -
I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT
Check to make sure cellular data is not disabled in settings. If it's on, try re-setting the phone. If that doesn't fix it, call AT&T.
-
Hello! I am writing to inform you that about that you have a problem displaying your website in the browser.
In Yandex browser. I decided to tell you, because the site is not displayed correctly. As in the screenshot.apart from the fact there's no way I could have answered your question confidently, I was also not able to supply my non-answer within your very tight time constraints.
what happened? how'd you get on? -
I see mediocrity is still trademark of Apple. Cannot enter my Visa number to make a purchse. Mind you my old iTunes got corrupted (again); so info should still be there.
Hi Aidan123,
Welcome to the forum and thanks for your post!
Sorry for the problems you've had getting set up on BT Mobile and getting your number transferred across. You can send over your details and I'll help you with this from here.
Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
Cheers,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
If you can solve this problem, then you are a true iPod Classic Genius !
So I have talked to every level at Apple's iPod support, and to list all the things they made me do would exceed the size limit of this message board. They even made me send back my original iPod Classic, and I had to wait for almost 1 month to receive my replacement. Here is a summary of my problem, that they (Apple support) have not been able to solve :
- I have a very extensive iTunes collection - over 77,000 songs. All of them were ripped, using iTunes.
- I use the ID tags extensively - i.e. every field is used, and the comments are filled to the maximum allowed characters.
- I am not able, to synch more than ~ 23,300 songs to any of my two 160 Gb iPod classics - therefore, including my exchanged iPod, this issue shows up on three different iPods.
When synching more than 23,300 songs, my iPods are no longer able to play any songs. In the 'About' menu, the iPod shows the wrong number of songs (i.e. 17,300 instead of 24,000) and a huge amount of 'disk space used' is flagged as 'other' (in orange). When clicking on 'Album' or 'Songs', the iPod shows the message 'No songs found'.
When synching less than 23,300, I am able to resolve this issue by restarting the iPods after synching. However, even when synching less than 23,300 titles, the iPods show the wrong number of songs, right after synching, and the huge amount of 'disk space used' for 'other'. Therefore, I have to restart my iPods every time I synch them.
The same problem occurs when using my old Power Book G4 (OS X 10.4.10), and on my new 2.4 GHz MacBook Pro (OS X 10.5.1).
I am using an external HD to hold my music files, which is directly connected to my USB2 port on either Laptop.
I have uninstalled and re-installed iTunes and all the firmware and software is up-to-date.
I have rebuilt my iTunes Library from scratch several times.
I have no problem, playing any of the 77,000+ songs in iTunes.
My assumption is, that there is a size limit for the iTunes library index file on the iPod. Can somebody confirm this theory ?
It seems funny, that the same problem shows up on three different iPods using two different Mac computers.
Does anybody have the same problem ?
Is this an issue that Apple is ignoring ?
Does anybody know, how this can be resolved ?
Thank you very much for your help.!
Message was edited by: Rochelle Renee ChristenHi There,
I have the exact same problem as you. I'm on my third ipod 160gb. All three have had the freezing and resetting problem. Like you my problems only start once I try to sync more than about 20,000 songs, which is around 90gb.
I have a 140gb music library. If I sync 70gb of my library it works fine. If I wipe that and sync the other 70gb it works fine so I know my mp3 files are okay. If I try to upload the whole library it freezes when I try to select any music.
If I'd only wanted to sync half my music library I'd have bought an 80gb ipod.
I thought firmware 1.1 and itunes 7.6 would solve my problem. No. Exact same problem. I contacted apple support. A genuinely helpful guy advised me to rebuild my music library and change my ipod drive letter. With baited breath I did all this, then restored my ipod to start from a clean slate. I synced my library in 10gb chunks... and it froze up around 90gb just like it always does.
What upsets me is the hours I've spent glued to my PC re-syncing music, searching through forums for answers. I'm absolutley pig sick of it. I never had a minutes trouble with any of my other ipods.
Please, please, please apple investigate this problem, it only happens when these ipods are over half full. Please let us have a firmware update that addresses the bugs us folks are complaining about instead of adding new features we'd be grateful for if only our ipods worked in the first place. -
With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it freezes the browser. I have to constantly go to Safari Preferences to remove them and then the browser will start working again. What can I do to stop this?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I want to buy iPhones (4S and 5) and want to buy them in US $. But want Apple to ship them to Pakistan. I will pay the charges of shipment once told. I want to buy the iPhones in Contracts. I'll unlock them myself no problem. Is that possible? Apple ans?
No, you can't do what you want. Apple will only ship a US iPhone to a verified billing/shipping address in the US.
-
how many problems do you need to have with a mac book pro to get it replaced i have had 6 problems and they say they have fixed everything and somthing new happends
I have had thehad the:
ram replaced
Battery
Audio
Trackpad
os operating system
fans
And they still won't replace the laptop for me worst buy ever but i have had a imac for 2 months and nothing at all wrong .You could try calling Apple and ask for Customer Relations.
From Readers Digest-February, 2005
How to Complain
You call customer service to complain about a product, and you hang up angrier than when you started. That’s customer rage, a feeling experienced by millions of people with a major complaint, says Scott Broetzmann, president an American firm that tells companies how to offer the best customer service. His secrets to getting good service:
Have a goal
If you want your product repaired, say so. Want an apology? Speak up.
Keep it short
Focus on one problem, and be succinct.
Stick with it
You have to invest the time it takes. Don’t get what you want? Ask for a supervisor.
Skip ultimatums
Don’t threaten not to do business with them again. Why should they help you if you won’t buy from them in the future?
Plead your case
Many companies have information such as how much money you’ve spent with them and how often you complain. If you’re a good customer, they may be more willing to help.
Be nice
You’re unlikely to get what you want if you’re rude.
Good luck. -
I have a new laptop so I download again iTunes...the problem here is that I just got a cd and I tried to put it on my iPod and it won't let me, how can I fix this?
The iPod sees the new computer as a new iTunes library. You can only sync with one iTunes library. However, you can manage music among disfferent computers. See:
Using iPhone, iPad, or iPod with multiple computers -
I recently purchased a movie (Prometheus) on my computer through iTunes and every time I try to put it on my iPhone, it fails. How can I successfully sync this video? Mind you, every other file syncs flawlessly.
Can you connect to a wifi source on the device? Enable wifi in settings on the device itself. If you don't have wifi at home, there may be a local hotspot you can use for this.
The reason this happens is carriers don't want people downloading huge files that would slow their network as well as eat up your data plan. -
IPhone 3G Reception Problems? You're Not Alone
I have the same problem with 3G coverage. I am suppose to be in a strong 3G coverage area at home. I only have 1 bar. Traveling around town (Sacramento area) my 3G coverage changes dramatically. From 1 bar to full bars? Not sure if its working properly or not??? Anyhow, this was posted on Engadget. After they exchanged their iPhone the problem went away? Could it be true? Is it the netork or our iPhones? Lets all hope nothing is wrong with our iPhones!!!!
iPhone 3G Reception Problems? You're Not Alone
One of the more disturbing things coming out of the iPhone 3G launch is reports of suspiciously poor 3G reception and speeds. Specifically, I've seen several people report one bar - specifically, one bar - of 3G reception in areas where other devices report strong reception. (More complaints at Engadget.)
This may be a problem with a batch of iPhones, or with something in AT&T's network, though I've also seen someone reporting the problem on O2 in the UK. The first review iPhone we got had this problem - it would mysteriously drop from four bars of 3G to one for no apparent reason, while our Motorola RAZR2 V9 reported better reception. Then it would shoot back up to four bars for no apparent reason a few minutes later. That unit would also occasionally throw up an "invalid SIM" error, requiring a reboot. That phone also had hideously slow 3G data speeds in the 50 kbps-150 kbps range, so the missing bars weren't just a display issue; there was something wrong with the way the phone was hitting the network.
We exchanged that iPhone for a different unit and no longer had the problem. We took the new iPhone and carried it around comparing it to a Motorola V9, and the two phones connected roughly the same number of calls on the 3G network. The new unit also had much higher data speeds in the same locations - still not great, in the 300-400 kbps range, but at least reflecting 3G.my white iphone does the same thing. I will drop down to one bar on 3g but full strength when i turn 3g off. Some people have tried to say that it is because 3g had more difficulty going through walls. Mine will not switch between 3g and edge on it's own so i find that when at home i just have to turn off the 3g. I have also heard rumors of a bad batch of iphones. I tried to take it into the store today but they were so busy i just had to make an appointment for thursday, although i was able to replicate the problem in front of the apple geek, which was a little surprising becuase while in line outside the store i had full bars of 3g. It might just be an issue that occurs when indoors? I also have a problem with lag. I'm hoping to get it resolved thurdays, whether they give me a new phone or just tell me to eff off and deal with it. probably the latter.
Maybe you are looking for
-
Windows 8, "Installer Interface Mode Not Supported"
I am getting the "Installer UI Mode Error", "Installer User Interface Mode Not Supported" I have tried compatibility mode, as this worked on my previous laptop Windows 7 and XP sp3, but when I "Test Program" and the InstallAnywhere Self-Extractor com
-
Macbook Pro name keeps changing?
A few weeks ago, my MacBook Pro was named "Russell's MacBook Pro." Then it changed, seemingly randomly, to "Russell's MacBook Pro 2." I figured, okay, that's weird, but I did upgrade to Yosemite, perhaps something got scrambled. Now it's changed a
-
91-Object variable or With block variable not set
Hi Is there a limit to the number of parameters in a RowKeyRange ?, the following works correctly until I add the final H130:I131. =EVRNG(H19:I20,H22:I28,H30:I31,H37:I43,H49:I54,H60:I64,H70:I74,H80:I81,H83:I89,H95:I97,H103:I105,H111:I113,H119:I120,H1
-
How to get highest salary from salary column in sharepoint list
Hello, I have one custom list in which there is one salary column so I want to get the highest salary.Can we do this OOTB or by using custom code by adding webpart(using CAML query). Thanks,
-
I am having trouble connecting to my in-home internet via my wireless router. The IPad says I'm connected to the router, but I am unable to receive email, Facebook and Safari. I run through Charter Cable. This only occurs on my IPad. My desktop work