RH7: Can't get rid of numbers in numbered headings

I'm importing a Word document into RoboHelp 7, and I can't
find a way to automatically remove the numbers from the numbered
headings when the document gets imported. Has anyone done this
successfully?

Cambot:
Whether the responses on these forums solve your problems or not, realize that all participants here are volunteers, and with a few occasional exceptions, they are not Adobe employees.
Everyone who uses email and mailing lists, sooner or later, comes to realize that it's possible to write or read messages in a way that may seem to be an insult. Just because it may seem so, doesn't make it so.
It is possible to write insults on purpose. Sometimes they're sent in reply to a posting or reponse that's misinterpreted as a slight. It's always a good idea to respond by asking if it was intentional.
The only discipline that's applied to participants who post intentional insults is that nobody pays attention to the particular posting, and forever after most sincere list participants simply ignore posts by that person.
In other words, if you need help and want help, be helpful yourself. If the help that's offered isn't successful, it's not from lack of sincere efforts by those on the forum.
HTH
Regards,
Peter Gold
KnowHow ProServices

Similar Messages

How can I get rid of numbers that are covering my entire desktop, caused by right-clicking "Clean Up Selection" on an icon?

How can I get rid of numbers that are covering my entire desktop, caused by right-clicking "Clean Up Selection" on an icon? The Apple OS X Mavericks blue & green desktop is totally gone. HELP!

Here's a screenshot of my desktop, as of a few minutes ago: http://lewgoodman.com/desktop.tiff

I have several devices under my apple id. If somebody contacts me all the other devices are ringing. How can I get rid of phone numbers in face time

Hi, i updated to ios 8
I have several devices under my apple id account. 2 iPhones (me and my wife ). 2 iPads also me and my wife and my iMac
The problem is that if somebody calls me for example for face time all the other devices are also ringing, because in face time my phone number is showing and also my wife's phone number. How can I get rid of my phone number on her iphone and ipad and vice versa
Please help
Rgds
Hans

Hans Oranje wrote:
The problem is that I can not verify her id on message and on Facetime
has that to do that the ipad has no tel number of course?? Should I leave my id number on her iPad ??
That isn't due to not having a phone number on her iPad. You can use FaceTime with any iPad using an email address as the "phone number". And if her iPad isn't a first generation iPad, if she uses the same Apple ID for FaceTime on both her iPhone and iPad, her iPhone number can be used as well (see iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage).
If her iPad is not verifying her Apple ID for FaceTime it's probably because the Apple servers are busy. Keep trying and it should verify. If you continue to have problems with this, look through the troubleshooting steps here: iOS: Troubleshooting FaceTime and iMessage activation.

In Mail, one mailbox for Recovered Message (AOL) keeps showing 1 very large message that I cannot delete. How can I get rid of this recurring problem, please?

In Mail on iMac, successfully running OS X Lion, one mailbox on My Mac for "Recovered Messages (from AOL)" keeps showing 1 very large message (more than 20 Mb) that I just cannot seem to delete. Each time I go into my In Box, the "loading" symbol spins and the message appears in the "Recovered Messages" mailbox. How can I get rid of this recurrent file, please?
At the same time, I'm not receviving any new mails in my In Box, although, if I look at the same account on my MacBook Pro, I can indeed see the incoming mails (but on that machine I do not have the "recovery" problem).
The help of a clear-thinking Apple fan would be greatly appreciated.
Many thanks.
From Ian in Paris, France

Ian
I worked it out.
Unhide your hidden files ( I used a widget from http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html)
Go to your HD.
Go to Users.
Go to your House (home)
there should be a hidden Library folder there (it will be transparent)
Go to Mail in this folder
The next folder ( for me ) is V2
Click on that and the next one will be a whole list of your mail servers, and one folder called Mailboxes
Click on that and there should be a folder called recovered messages (server) . mbox
Click on that there a random numbered/lettered folder -> data
In that data folder is a list of random numbered folders (i.e a folder called 2, one called 9 etc) and in EACH of these, another numbered folder, and then a folder called messages.
In the messages folder delete all of the ebmx (I think that's what they were from memory, sorry I forgot as I already deleted my trash after my golden moment).
This was GOLDEN for me. Reason being, when I went to delete my "recovered file" in mail, it would give me an error message " cannot delete 2500 files". I knew it was only 1 file so this was weird. Why 2500 files? Because if you click on the ebmx files like I did, hey presto, it turned out that they were ALL THE SAME MESSAGE = 2500 times. In each of those folders in the random numbers, in their related message folder.
Now remember - DONT delete the folder, make sure you have gone to the message folder, found all those pesky ebmx files and deleted THOSE, not the folder.
It worked for me. No restarting or anything. And recovered file. GONE.
Started receiving and syncing mail again. Woohoo.
Best wishes.

Can't get rid of prefixes in Table of Contents

Doing a table of contens for a book with 12 chapters. Mostly it works fine but one thing I can't get right: most of the entries work fine but some appear with prefixes, as in "Ch_5:102.
I can't get rid of them. I have gone to the made sure that no prefix is entered in the numbering options for that chapter. I have done "Update Numbering" several times. What else can I try.
I'm also confused about how to select the correct TOC styles for different headings in my chapters. In the chapters, I have styles "Heading One" "Heading Two" etc. and I want to associate them with styles TOC One, TOC Two, etc. but I find it a bit confusing.
Thanks

Cambot:
Whether the responses on these forums solve your problems or not, realize that all participants here are volunteers, and with a few occasional exceptions, they are not Adobe employees.
Everyone who uses email and mailing lists, sooner or later, comes to realize that it's possible to write or read messages in a way that may seem to be an insult. Just because it may seem so, doesn't make it so.
It is possible to write insults on purpose. Sometimes they're sent in reply to a posting or reponse that's misinterpreted as a slight. It's always a good idea to respond by asking if it was intentional.
The only discipline that's applied to participants who post intentional insults is that nobody pays attention to the particular posting, and forever after most sincere list participants simply ignore posts by that person.
In other words, if you need help and want help, be helpful yourself. If the help that's offered isn't successful, it's not from lack of sincere efforts by those on the forum.
HTH
Regards,
Peter Gold
KnowHow ProServices

HOW CAN I GET RID OF THE EVENTS CATEGORY?

There are days that I will add only one picture to iPhoto and it becomes an event. Every time I add a new picture to iPhoto 8 I get a new event. This past week I have been renaming some albums and adding new albums and folders and that has had a very undesired result of now telling me I have 26,624 items in 3,071 events. That, 26,624 number, incidentally, is the same number of photos I have in iPhoto.
If I try to delete an event, I find I am also deleting the pictures in that event from my main iPhoto library. I have also noticed that the events in my events area are randomly numbered, not in any sort of order.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!
Also, iPhoto 8 does not recognize my camera (Canon PowerShot S5IS) when I try to add photos to iPhoto.

cmiles:
Welcome to the Apple Discussions. You can't get rid of the Events mode as it's the basic container feature of iPhoto which is organized by date. You can always drag that single event onto another one in the Event mode to join them, thus getting rid of the single event. You can also do that in the Photos mode, with Event names displayed so it's like the old rolls, by dragging a photo or photos into another event.
Regarding the problem of the camera not being recognized that's a tougher problem to fix. A workaround is to use Image Capture to upload the photos to a folder on the desktop and then import the folder into iPhoto.
One user fixed his similar problem with an Archive and Install of Leopard and a reinstall of iPhoto from the disk it came on. As I said, not as easy a fix.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How can i get rid of ad redirects on my Safari?

How can i get rid of ad redirects on my Safari? Pop up blocks are not working.

Download and install GlimmerBlocker.
(Presumably you regularly empty your Safari cache by deleting the following file:
Home/Library/Caches/com.apple.Safari/cache.db
and clear your History)
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296

How can I get rid of a system dialogue that keeps reappearing?

Ever since the latest system update, when my Apple TV goes into the slideshow mode, a dialogue box keeps popping up. It briefly disappears when the picture changes but I can't get rid of it permanently. It reads:
"Wirelessly send what's on your ios device or computer to this display using Airplay. To learn more, go to apple.com/airplay. (1) Choose Wi-Network [name of my local Wi-fi network appears] (2) Choose this Apple TV."
I assume that the numbers 1 and 2 are options but no action I take on the Apple TV remote or the Logitech universal remote I use clears the dialogue.
How can I eliminate this dialogue? It really defeats the purpose of the slide show!

Same issue for me. I've updated the Conference Room Mode, but now when I start the slideshow it goes back to the Apple TV Menu? Any advise? Thanks!

HT1267 Q I keep getting a repeat screen that says "unable to download" [name of a song] and gives me the choice to "try again" or "done". I don't want the song and can't get rid of the screen. Ideas?

I keep getting a screen that says "Unable to Download" [song] with two choices - "done" or "try again". I have tried both and can't get rid of the screen ( and don't want the song which I never ordered to begin with. Ideas on getting rid of the screen??

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

My ical is showing "on my mac" "iCloud" and "yahoo" calendars. I just want one calendar that will sync up to my iPhone. How can I get rid of all these Calendars???

My ical is showing "on my mac" "iCloud" and "yahoo" calendars. I just want one calendar that will sync up to my iPhone. How can I get rid of all these Calendars??

'On My Mac' and Yahoo calendars won't sync to iCloud. You can move them to iCloud, but then Yahoo will lose contact with its calendars. if you are happy to sync onlly with iCloud, and thus to your iPhone, you can move the calendars: you will have to do it one at a time, and the process is just a trifle convoluted - it's described in the first set of numbered instructions here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmovecalendars.html

When I login on my When I sign in to a site on my ipad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

When I sign in to a site on my iPad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

You can edit keyboard shortcuts in Settings>General>Keyboard>Shortcuts>Edit.

I have a Australian iTunes account and want to switch to using the u.s store as I now live there, I cannot do this because I have $1.41 still in the oz account an image to have a zero balance to change stores, how can I get rid of the $1.41?

I want to switch to the u.s store as I now live in the us, I cannot switch stores because my balance is $1.41 in the oz store and needs to be zero, how can I get rid of the $1.41 when everything costs more or less than that? I do not have a credit card on the oz iTunes account an I cannot use my us one to top it up.
HELP

Click here and request assistance.
(60992)

I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?

I want to switch stores from Japan to USA. I used to have an iTunes card, and there's 15 YEN left in my account, how can I get rid of that so I can start purchasing in the US store using my new credit card?

I can't seem to find an app that costs my available balance. iTunes said I need to spend it ALL before I can change stores. This means I cannot totally change stores.... Hopeless.

In ical edit, can you get rid of invitees, availability, url, notes?

in ical edit, can you get rid of invitees, availability, url, notes?

in ical edit, can you get rid of invitees, availability, url, notes?

Can't get rid of a TX - message keeps appearing and being processed by OSB

I have some sort of a poison message or TX I can't flush. Every 10 seconds I get a log message like the second one below, and the number of pending messages in multiple places and OSB proxy service messages processed keep climbing - all without producing any new messages on my part. I've tried deleting the default server store on the OSB managed server and the filestore for the JMS server. No luck.
When this first started happening, the error messages looked like the first one below. Something I did caused the change, I assume. However, it's the same TX ID throughout.
So, first, how can I get rid of this thing? It's driving me nuts and keeping me from closing out a POC.
Second, why is it happening? I have one suspicion - could it be because that somehow we configured mutiple domains with the same name for a distributed application? It's not my normal practice but it happened. These domains don't communicate directly, but there are domains that need to communicate with both. So I'm guessing the name ambiguity may be hurting us. Just a guess, though.
In this case, the sgosb domain's proxy service (this domain name is unique) is receiving messages from a queue resident in the pega_domain in Singapore and another proxy service is putting a message to another queue in the pega_domain in the UK. This is not in a single TX; the first proxy service forwards the message to a queue in the sgosb_domain, the second proxy service gets that message and puts it into the other pega_domain. It's an XA TX for each proxy service.
Just to make it more fun, the sgosb_domain has another proxy service reading from a different queue and forwarding it to a queue in the third pega_domain in the US.
TIA for any help or insight.
Oh yes, the OSB domain is WLS 10.3.4, while the pega_domains are WLS 10.3.2
Original error message
####<Apr 13, 2011 4:32:13 AM GMT> <Error> <EJB> <sg01app510> <sgosb_1> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'>
<<anonymous>> <> <92f54a30d60e6302:-4b6d523c:12f4cfeaabc:-8000-0000000000000123> <1302669133597> <BEA-010026> <Exception occurred during commit of
transaction Xid=BEA1-039B0B6D3D0E77C1B135(1898471720),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since
begin=0,seconds left=600,XAServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=(ServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=
(state=new,assigned=none),xar=null,re-Registered = false),SCInfo[sgosb_domain+sgosb_1]=(state=rolledback),SCInfo[pega_domain+pega_1]=(state=rolledback),properties=
({}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+, XAResources={eis/tibjms/Topic,
WLStore_sgosb_domain_FileStore_auto_1, eis/aqjms/Queue, eis/wls/Queue, eis/tibjms/Queue, WLStore_sgosb_domain__WLS_sgosb_1, eis/AQ/aqSample, eis/aqjms/Topic,
eis/pramati/Queue, eis/sunmq/Queue, WLStore_sgosb_domain_WseeFileStore_auto_1, WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1,
WSATGatewayRM_sgosb_1_sgosb_domain, eis/jbossmq/Queue, eis/activemq/Queue, eis/fioranomq/Topic, eis/tibjmsDirect/Topic, eis/wls/Topic,
eis/tibjmsDirect/Queue, eis/Apps/Apps, eis/webspheremq/Queue},NonXAResources={})],CoordinatorURL=pega_1+nj09mhm5078:22111+pega_domain+t3+):
javax.transaction.RollbackException: This transaction does not exist on the coordinating server. It was probably rolled back and forgotten.
        at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
        at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
        at weblogic.transaction.internal.CoordinatorImpl_1032_WLStub.commit(Unknown Source)
        at weblogic.transaction.internal.TransactionImpl$1.run(TransactionImpl.java:331)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
        at weblogic.transaction.internal.SecureAction.runAction(SecureAction.java:72)
        at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:327)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:252)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:553)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:424)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:326)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: javax.transaction.RollbackException: This transaction does not exist on the coordinating server. It was probably rolled back and forgotten.
        at weblogic.transaction.internal.CoordinatorImpl.commit(CoordinatorImpl.java:94)
        at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
        at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The error message I'm getting now
####<Apr 13, 2011 4:51:38 AM GMT> <Error> <EJB> <sg01app510> <sgosb_1> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <>
<92f54a30d60e6302:-42808c28:12f4d3173cb:-8000-0000000000000032> <1302670298730> <BEA-010026> <Exception occurred during commit of transaction
Xid=BEA1-0011D0679BA5074B8E12(1930603846),Status=Rolled back. [Reason=javax.transaction.xa.XAException],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds
left=60,XAServerResourceInfo[WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1]=(ServerResourceInfo[WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1]=
(state=rolledback,assigned=sgosb_1),xar=WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1239571724,re-Registered =
false),XAServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=(ServerResourceInfo[WLStore_pega_domain_ProcessEventJMS_Store_mgd1]=
(state=rolledback,assigned=pega_1),xar=null,re-Registered = false),SCInfo[sgosb_domain+sgosb_1]=(state=rolledback),SCInfo[pega_domain+pega_1]=(state=rolledback),properties=
({}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+, XAResources={eis/tibjms/Topic,
WLStore_sgosb_domain_FileStore_auto_1, eis/aqjms/Queue, eis/wls/Queue, eis/tibjms/Queue, WLStore_sgosb_domain__WLS_sgosb_1, eis/AQ/aqSample, eis/aqjms/Topic, eis/pramati/Queue, eis/sunmq
/Queue, WLStore_sgosb_domain_WseeFileStore_auto_1, WLStore_sgosb_domain_MesssageForwardingJMS_Store_mgd1, WSATGatewayRM_sgosb_1_sgosb_domain, eis/jbossmq/Queue, eis/activemq
/Queue, eis/fioranomq/Topic, eis/tibjmsDirect/Topic, eis/wls/Topic, eis/tibjmsDirect/Queue, eis/Apps/Apps, eis/webspheremq/Queue},NonXAResources=
{})],CoordinatorURL=sgosb_1+152.64.128.243:22110+sgosb_domain+t3+): weblogic.transaction.RollbackException: Unknown reason
        at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1881)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:345)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:553)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:424)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:326)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: javax.transaction.xa.XAException
        at weblogic.store.gxa.internal.GXAResourceImpl.prepare(GXAResourceImpl.java:1227)
        at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:1295)
        at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:500)
        at weblogic.transaction.internal.ServerSCInfo.startPrepare(ServerSCInfo.java:380)
        at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(ServerTransactionImpl.java:2593)
        at weblogic.transaction.internal.ServerTransactionImpl.localPrepare(ServerTransactionImpl.java:1321)
        at weblogic.transaction.internal.SubCoordinatorImpl.startPrepare(SubCoordinatorImpl.java:183)
        at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
        at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
        at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
        at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
        at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.>Edited by: SteveElkind on Apr 13, 2011 5:50 AM

Tom,
Thanks! Succinct and easy to understand as ever.
Yup, that covers it - I had also just seen this in the docs after looking at atheek1's earlier response (thanks to him/her as well). It's covered almost as clearly there as you state it here (http://download.oracle.com/docs/cd/E11035_01/wls100/jta/trxcon.html).
While the ESB domains meet all of those requirements (except for cross-domain security configuration), each of the other two sets of domains (3 in each set) do not meet the naming uniqueness criteria for domain and server names; they do for JMS server names. I saw the store names in the TX identifier string as included resource, and assumed they might play a part - that's why I changed them. As you say, an unnecessary change. Oh well - it was an easy one.
My normal practice has been for unique names in the past, due to problems I had years ago with cross-domain JMS traffic in an earlier WLS version. I guess it's the wrong time to have forgotten that lesson.
Does anyone know of a quick way of changing a domain name quickly without rebuilding the domain? In the past WLST resulted in incomplete copies for me, is that still a problem? Server names are easy, just some global search-and-replace in the config.xml file (and in the management scripts, too)
/Steve

RH7: Can't get rid of numbers in numbered headings

Similar Messages

Maybe you are looking for