RH8 for Word gives "not responding" message when I try to add a hotspot

Good afternoon. I have been trying to add a hotspot or jump to
RoboHelp 8 Word with no luck. My computer keeps freezing and in a few minutes I will see that Word is "Not Reponding" on the blue bar at the top of the screen. Any ideas? Thanks.

Hi there
Wow... it's been last century since I touched RoboHelp for Word, but I do recall that it involves using Word macros to work the RoboHelp Magick. Have you ensured the Macro Security has been relaxed for this? Is this the first time you have tried using RoboHelp for Word? Or was it working fine and suddenly stopped?
One other thing. What is your operating system?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

Firefox continually gives me a "not responding" message when I try to do anything

'''bold text'''A couple of days ago I upgraded to Firefox 4.0. Beginning yesterday, Firefox opens very slowly if at all and then gives me a "not responding" message if I try to do anything. I am running Windows 7

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

I am getting a file format not supported message when i try to add an ebook to ADE. What can i do?

Ok, I figured out how to add ebooks to the ADE library, but when i dragged the ebook to the library, there was a message that said the file's format is currently not supported. I tried a couple other ebooks with the same results. Is there something i can do? I have windows 7 and intel core 13.

1. Is the printer connected with a cable, or is it wireless?
2. Have you installed the printer driver?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&soft wareitem=mp-107203-2
Please post back with this information.

My IPod Touch 4 Gen will not respond and when I try to Restore it it gives me a code 1601 how do I fix it?

My IPod Touch 4th gen will not respond and when I try to restore it, it gives me a code 1601 how do I fix it?

- Try another USB port.
- Try on another computer
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

This ipod cannot be used because the Apple Mobile Device service is not started message when I try to sync

This ipod cannot be used because the Apple Mobile Device service is not started message when I try to sync. I've had this ipod since August. I just synced it two days ago with no problems. I've recently added a new app and now it's not syncing. Any help would be great!

See here: How to restart the Apple Mobile Device Service (AMDS) on Windows
B-rock

Last summer I bought a music album from iTunes. I've already transferred all my orders from my units, but somehow iTunes wants me to pay for the same album again. When I try to add it to my wish list it simply tells me that I've already bought that item.

Last summer I bought a music album from iTunes. I've already transferred all my purchases from my units, but somehow iTunes wants me to pay for the same album again. When I try to add it to my wish list it simply tells me that I've already bought that item.
And I've already tried to search for downloadable purchases.
So fact is established, I've purchased this album before but iTunes does not recognize it.
What to do?

Hey sorry for the late response but I've been out of town. I can copy and paste the email responses if necessary or desired, and if it's fixed already this is a moot point anyway, but basically they kept asking me for the order numbers for the two songs I already bought from the specific album I was trying to complete, which I eventually gave them - along with telling them multiple times that the Complete My Album feature wasn't working for ANY album. They gave me two free song codes to compensate me for the two songs I bought, and then told me to go and buy the album at full price, but the ENTIRE TIME they COMPLETELY ignored that I was telling them that this wasn't an issue with one album but was a larger, seemingly systematic issue that other people were experiencing. Even after I got the song codes I emailed them back and said AGAIN that this wasn't an isolated feature, and they just sent me the link to the apple Feedback page (http://www.apple.com/feedback/itunesapp.html) and told me to submit my complaint there. So, technically, my issue was never really "resolved," in that they never fixed the Complete My Album feature that I am aware of - or even acknowledged that anything needed fixing, but I haven't tested it since Sunday.
If it's working for you, then hopefully they fixed it! I've noticed they've updated to 10.4.1, but the notes don't indicate they're fixing anything about the Complete My Album feature, so I don't know.

Error message when I try to add an image to the header

I receive the following error message when I try to add an image to the header:
Acrobat.com encountered an unexpected error.
I have tried to add .jpg and .gif without success.
Thanks,
MDawn

Hi,
We typically see this when an organizations IT department is blocking the upload of images. Are you working on this at work? If so, can you try adding the image outside your companies network?
Thanks,
Todd

'Not Responding' message when saving in CS5

Today is the first time i've had the chance to take my new CS5 illustrator out for a drive, and have found that more often than not, when I save the file i'm working on I get the 'Not Responding' error message appear. My system is a brand new Dell quad core, Q955- @ 2.83GHz with 8 GB RAM running Win7 64 bit.
The files i'm using are located on a network drive, and i'm wondering if this may be the problem. If i leave it go for a minute or two it rectified itself, but I find it a bit strange considering the software and hardware i'm running.
Any ideas where to start?

Since disconnecting the persistent mapped network drive, my issue has gone away. So far so good.
To clarify my issue, I was intermittently seeing a 'Not Responding' message in the title bar of Adobe Illustrator CS5 when attempting to Save a drawing. Clicking File/Save would immediately show a wait cursor (blue circle in Windows 7) and the Save dialog box would not appear.
Although the 'Not Responding' error would appear, my PC did not seem to be busy doing anything (no CPU usage for the AI executable in Task Manager).
After doing some research on Google for hung applications in Windows 7 when Saving, I came across the following Microsoft link:
http://support.microsoft.com/kb/313937
According to Microsoft, Windows 7, when Saving, first checks the availability of network resources (liked persistent mapped drives). Applications like MS Office can hang when attempting to Save if these network resources are not available. Windows 7 also does not seem to "get along" well with older versions of Windows (like Windows 2000 for example). The hung when saving issue can also be caused by a slow network connection to network resources.
In my case, I had:
1 - A slow link between the hung Windows 7 PC and a persistent (ie - reconnects at logon) mapped network drive.
2 - The network drive is also hosted on a Windows 2000 server (Windows 7 doesn't always play nice with Win2K)
After disabling the group policy that mapped this drive at logon time, my hung AI issue went away. I can still reach the drive through a shortcut on the desktop of the Win7 PC and that seems to work out fine. It was only when this resource was "mapped" as a shared drive that this became an issue for Windows 7.
Anyone having this issue should also check the possibility of losing your network connection to a shared resource (like the network card going into sleep mode due to power save options and thus breaking the connection to the network).
Hope this helps others.

Every time I try to print a file to Adobe PDF, I get the message "Firefox is not responding". When I try to cancel the print job, all of my Firefox tabs shut down. This just started today. Up until today, I could print a page to Adobe PDF with no problem.

The print dialouge box comes up. I select print to PDF. Another box comes up and says it is preparing the document (This is the way it has always been). Then, nothing. It says Firefox is not responding. If I try to close out the print box, it not only closes the page I was on, but any other open tabs in Firefox. How can I fix this?

I didn't see that I could edit the question before "I answered myself." I updated the question.

Why do people using other brands of smart phones get a "not available" message when they try to view vids that I made on my iPhone 4s?

I made a video on my iPhone 4S and e-mailed to another party to view. The other party told me he could not view it. He said he got a "not available" message when trying to view it. Next I sent the video to him in a text message. He had the same problem again.

I have the same exact problem. let me know if you figured anything out

CS5 - "Not Responding" message when saving large files??

For quite some time now, I have been getting a message in the Save Progress Bar Dialogue that says "Not Responding" .... after I start saving a file. The progress bar will advance about 20%, then it will say (Not Responding) in the box.... and then it will disappear and the file will save.
It's very disconcerting to see this error pop up time-after-time when saving files.
I also get this error when opening certain files.
Anybody else get this error?
The files may typically have several 'placed' files from Photoshop.... which is another topic and unresolved problem with Illustrator too.
Anything to worry about??
Thanks.
Oh...
I have an Intel i7 with 12gbs of ram, a fast SAS boot drive, and plenty of bells and whistles in the 'power' department.
Todd

Have you already tried saving the file to a different location (maybe on the other drive)?
Just to find out if it's Illustrator or the drive.

I get a "not responding" message when changing websites or webpages.

When I change to a different web site, or go to a different page withing a website very often in the upper left corner of my screen I see the message "Firefox is not responding" and my computer freezes up for a few seconds. Sometimes it freezes up for 30 seconds. This is extremely annoying. This happens quite frequently. I have tried re-installing Firefox, but the problem is still there.

Using McAfee?

"device not responding" message when trying to burn in itunes

when i try to burn a playlist in itunes it starts the process then it goes straight to the finishing stage, then it ejects the cd and says "device not responding properly, cannot restart or restore". can anybody help with this problem. thanks

i was having the same problem, i read someone's advice in another thread to switch to 16x speed, it worked. it was set at maximum speed by default. very frustrating stuff, i must say. but i still love my mac.

Acrobat 9 gives an error message when I try to open it.

I've been using Acrobat 9 Standard on my Windows 7 laptop for 2-3 months without a problem, but now when I open Acrobat 9, it gives me an error message "Licensing for this product has stopped working" and shuts down. It happens when I try to open a .pdf file or just open Acrobat 9 without a file. I don't see anywhere on the Adobe website to get an answer, so I wonder if other users have an idea? Thanks.

I see that Adobe has my order listed for Acrobat 9 on it's website, but I'm not sure how else to check the registration? I use the same program on my desktop without any trouble. How do you recommend that I check the registration?

My ipad will not respond, and when i try to shut it down it won't what can I do?

All of a suuden my ipad would not respond to taps, or any manipulation. When I tried to shut it down, the swipe for shut down would not respond. any ideas? what might be problem ? and what can/should I do? Thanks

First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
You won't have to swipe anything on the screen to reboot the iPad. Hopefully this will correct the error.

RH8 for Word gives "not responding" message when I try to add a hotspot

Similar Messages

Maybe you are looking for