RH8: How do I choose a stylesheet to apply for all topics?

I have a RH project created by importing a FrameMaker doc (foo.fm). All (most, but I'm not going to worry about that) of the topics came in okay, and a stylesheet was created and added to my Project Manager: "foo.css".
Now, I have a different .css file that I want to actually use: bar.css.
I was able to add bar.css to the Project Manager (thanks to an old forum post), so now I have foo.css and bar.css.
All of my topics are currently using foo.css. I can change them all to use bar.css by selecting the entire topic list and changing the assigned style guide.
That leaves me with... how do I ensure *new* topics automatically use bar.css?
Thanks!

I will :-)
I find it helps me construct my topics better when I have the content as wysiwyg as possible during editing (my brain is just wired that way).
That being said... it looks like the bar.css file has made its way in to the Project Manager, and new topics use that style sheet by default now (as a result of my mass change, I guess).
So... thanks! (And I'll make sure I watch for that option when I generate the output.)

Similar Messages

How do you choose which photos from Aperture for Apple TV screen saver?

How do you choose which photos from Aperture for Apple TV screen saver?

How do you choose which photos from Aperture for Apple TV screen saver?

How do i use an external hard drive for all my itunes music?

how do i use an external hard drive for all my itunes music?

Hi valleydave,
Here are two good links for you to check out:
http://support.apple.com/kb/ht1751
http://support.apple.com/kb/ht1449
The first one goes over, in-depth, what you're looking for in regards to "off site" iTunes.

How do I set Firefox to be usable for all users on one computer?

How do I set Firefox to be usable for all users on one computer?

I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
[https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

How can I create a magazine web app for all devices?

How can I create a magazine web app for all devices?

magazine web app is not supported in DPS as of now. You can share the contents to preview it on web content viewer.

How can i set a global error page for all error cod

how can i set a global error page for all error code?
i don't want to leave a long list in the web.xml file.could any one help me?
thanks

If u have a common Error JSP named as ErrorPage.jsp
You need to have the following piece of code in the JSP as :
<%@ page isErrorPage ="true"%>
This makes it as the Common Error Page for the Application. Now all you need to do is from other JSP's throw the Exception to teh container. The container will redirect to this Page and process accordingly.
Thanks and regards,
Pazhanikanthan. P

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

How can i write the below code using "For all entries"

Hi
How can we write the below code using "for all entries" and need to avoid joins...
Please help
SELECT aaufnr aobjnr aauart atxjcd a~pspel
agstrp awerks carbpl cwerks
INTO TABLE t_caufv
FROM caufv AS a
INNER JOIN afih AS b
ON aaufnr = baufnr
INNER JOIN crhd AS c
ON bgewrk = cobjid
AND c~objty = 'D'
WHERE ( a~pspel = space
OR a~txjcd = space
OR NOT a~objnr IN
( select OBJNR from COBRB AS e
WHERE objnr = a~objnr ) )
AND a~werks IN s_plant
AND a~auart IN s_wtype
AND NOT a~objnr IN
( select OBJNR from JEST AS d
WHERE objnr = a~objnr
AND ( dstat = 'A0081'OR dstat = 'A0018' )
AND d~inact 'X' ).
Reward points for all helpfull answers
Thanks
Ammi.

Hi,
SELECT objnr objid aufnr
        from afih
        into table t_afih.
SELECT objnr
        from JEST
        into table t_JEST
        where stat = 'A0045'
           OR stat = 'A0046'
           AND inact 'X'.
SELECT objnr
        from COBRB
        into table t_cobrb.
SELECT arbpl werks objid objty
      from crhd
      INTO table it_crhd
      FOR ALL ENTRIES IN it_afih
      WHERE objty eq 'D'
      AND gewrk = it_afih-objid.
SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
        FROM caufv
        INTO table t_caufv
        FOR ALL ENTRIES IN it_afih
        WHERE aufnr = it_afih-aufnr
          And pspel = ' '
          AND txjcd = ' '
         ANd objnr ne it_crhd-objnr
          AND auart in s_wtype
          AND werks in s_plant.
         AND objnr ne it_jest-objnr.
dont use NE in the select statements, it may effect performance also. Instead use if statements inside
loops.
loop at t_caufv.
read table it_chrd............
if t_caufv-objnr ne it_chrd-objnr.
read table it_jest..........
   if   if t_caufv-objnr ne it_jest-objnr.
    (proceed further).
   endif.
endif.
endloop.
hope this helps.
Reward if useful.
Regards,
Anu

How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

The following example was one of dozens that showed up on a simple Google search of.....
monitor Internet data use on a Mac
Watch your Internet usage with NetUse Monitor | Macworld
Most service providers have an application for their users as well.

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

How to get the file size (in bytes) for all files in a directory?

How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
 System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
 public static void main(String[] args) {
 java.io.File f = new java.io.File("/media/disk");
 // provides only the file names, not the path/name!
 //String[] files = f.list();
 File[] files = f.listFiles();
 for (int i = 0; i < files.length; i++) {
 System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting. To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM

How do I set the default print margins for ALL printers in mozilla.cfg

How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.

Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
If you can figure out how to add the printer name, this can be used to lock the margins.

How to export book pdf using custom presets for all book files in indesign using javascript

How to export book pdf using custom presets for all book files in indesign using javascript.

Hi jackkistens,
Try the below js code.
Note: you can change your preset name in below (e.g, Your preset name).
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "Your preset name", myBook.bookContents, "Book_PDF", false);
example:
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "[High Quality Print]", myBook.bookContents, "Book_PDF", false);
thx,
csm_phil

How to set user preferred timezone in OBIEE for all objects.

How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

How to make Adobe as your default viewer for all your PDF file instead of the Preview given? Thanks

How to make Adobe as your default viewer for all your PDF file instead of the Preview given? Thanks

you need to "Get Info" on the file first. Select it, right click and select 'Get Info' in the menu.
In the window that pops up, near the bottom, the "Open With" drop down menu needs changed. If the drop down menu does not present the one you want, select "Other" and find it.

RH8: How do I choose a stylesheet to apply for all topics?

Similar Messages

Maybe you are looking for