RH8 Moved Source File - Moved it back and now can't access...Yikes

I was upgraded to Windows 7 and asked to move all my folders/files to a shared drive so IT could wipe my laptop clean, install W7 and then they reinstalled all my software.
I was careful to move files within their folders. I moved "My RoboHelp Projects" folder with all my projects to our Shared Drive..
When I moved them back to my Laptop, I am unable to open the robohelp project source folder originally created as an .xpj. I receive the following error messages, one saying it can not open the .cpd file. When looked at the file extension of the folder it is a .cpd. How could it change from .xpj to a .cpd???? I'm confused....
Any idea why this happened and how I can recover these projects, other than a kick in the head for moving them???? Thanks!

Just to add to Amebr's reply, when the 802 patch was released it had to be treated as an upgraded version for technical reasons. Before the reinstall of Windows you obviously had that patch installed and equally obviously IT did not apply the patches when they reinstalled RoboHelp. Thus when you open a project it knows it is from the "upgraded" 802 version and tells you just that, it then also says it cannot open the CPD, which is what the XPJ does.
Apply the patches and all should be OK.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Hi guys, I hope you help me.. I have no wifi and want to go back from mavericks to lion but erase disc and now can't access disc utility because internet recovery is poping out? what shall i do?

Hi guys, I hope you help me.. I have no wifi and want to go back from mavericks to lion but erase disc and now can't access disc utility because internet recovery is poping out? what shall i do?

Problem is that my wifi does not work.. im using usb dongle.. My screen was broken and i replace it with 2010 model which suppose to be compatibile with my 2011. Is there a way I can access utility disc and not going itno internet recovery mode?
Thanks!

I have changed my email address so I changed my Apple ID and password. Just realised haven't changed icloud details and now can't access as don't know password or security questions. Want to delete and set up on new Apple ID.

I I have changed my email address so I changed my Apple ID and password. Just realised haven't changed icloud details and now can't access as don't know password or security questions. Want to delete and set up on new Apple ID. Help please???

In order to change the iCloud ID on your device you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I have totallymessed up outlook on my ipad, attempted to change password, and then couldn't send email and now can't access at all. can i reload "clean" new version and start all over?

i have totallymessed up outlook on my ipad, attempted to change password, and then couldn't send email and now can't access at all. can i reload "clean" new version and start all over?

Settings>Mail, contacts, calendars>Your email account name>Delete Account. A window will popu after you select your email account in the settings and there is a large red Delete Button at the bottom of the window.
Settings>Mail, contacts, calendars>Add account. Tap on Add account and start entering your email account details again. If your email account doesn't fit one the per installed accounts in there, tap on Other - and add your account in there.
I would restart the iPad after you delete the email account, just to be starting "fresh" again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button

Help please. School reimaged macbook and now can't access backups on time machine.

School reimaged macbook and now can't access backups on time machine. I can see them but can only get to a really old one.
thanks.

Maybe this http://web.me.com/pondini/Time_Machine/B6.html can help you.
Stefan

I missed the intro email to iCloud and now can't access my I cloud. How do get that email?

I missed the intro email to iCloud and now can't access my I cloud. How do get that email?

See also http://www.apple.com/icloud/setup/ios.html

Hi, I have a new laptop (Windows 8) and now can't access any part of my itunes account, can anybody help?

Hi, I have a new laptop (Windows 8) and now can't access any part of my itunes account, can anybody help?

forgot to add am so un technical too !!! so any help massively grateful !

HT4113 When making a passcode on my 1st generation iPod touch, I typed it in incorrectly and now can't access my device. What can I do?

When making a passcode on my 1st generation iPod touch, I typed it in incorrectly and now can't access my device. What can I do?

Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Moved to France and Now Can't Set Up Email Accounts

I have a Blackberry Curve 8520. When I was living in Canada, I was able to register my gmail email account to receive emails on my phone. I have now moved to France, and when I access the Setup Wizard to add my email accounts, the option to add my private email account has disappeared. I only have the option to add a work email account with a Blackberry Enterprise Server. How can I add my private email account?

Hi lvu
This sounds like your provider in France has not setup the correct BlackBerry data plan for you. It appears you have their Enterprise Plan, however, you will need their Prosumer plan to setup personal email via BIS.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Help! I installed the wrong firmware and now can't access the camera to change it back!

I have done something silly and wonder if you can help to get me out of a fix. Yesterday I upgraded the firmware of my camera and I can no longer see the camera on the network, even when it is connected by a wired connection. I have tried a hard reset but that has not helped.
I now realise that I have upgraded with firmware via a link from the US website and it is a different firmware version to the UK site. It is also designated as a RoSh version (although I do not understand the significance of this). Presumably US networks are set up differently to EU ones?
I upgraded the firmware from version 1.10 to version 1.25 (RoSh). The European firmware upgrade is designated as version 1.21.
The only way forward that I can see is to find a network that will recognise the camera and then change the firmware back to the European one. Any ideas?

Whats the Model number of your Camera. As you have uploaded the wrong firmware of your Camera. I think you can download the Latest firmware from the European website and upgrade the firmware of your Camera using TFTP tool utility.
Go to ftp.linksys.com/pub/network... and download TFTP.exe File on your computer. Once done connect your camera to the Computer and provide a Static IP to your computer.
Double click the tftp.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.115...
For Password- Enter the password you assigned the camera. By default, the camera’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your camera, wait for 30 seconds and re-connect the power cable...Now re-configure your camera...

Software was updated today at Apple Store, and now can't access photos and videos in iPhoto

I brought my iMac into the apple store today as I was having issues with programs freezing. They wiped everything clean, reinstalled my programs and updated me to the current version of OS. After I transferred my info back in from my back up hard drive, I went into iPhoto to check to make sure everything was ok. I got a message stating that I had to update iPhoto to work with the current software to be able to view/use pics. I clicked ok, and everything updated. When I now go to iPhoto, all of the events are labeled correctly, but all but 2 are black with no key photo (even though I designate one). Basically, the screen is all black with all the blank black event squares. As I scroll down, the key photos will appear for 1 second, and then disappear. When I go into the event, I see all of the photos very small, and when I try to enlarge them or click on them to edit or view, I get a triangle with an exclamation point in the middle of it. When I click on any movie/video, I get a message saying that "the movie contains an invalid data reference". I have about 8,000 photos.
What is going on and how can I fix this?????

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Mountain Lion install failed and now can't access HD

Currently on a Early 2011 high-end Macbook Pro running Snow Leopard.
I downloaded and then went to install Mountain Lion, everything was fine and it began to restart for the install after the initial loading thing. However, when it came to install it gave me an error that roughly said the drive is damaged and can't be repaired, telling me to click restart and try installing again. I did this, (taking slightly longer and the colour of the background became more yellow at one point) but instead of the logon pane it went to OSX Utilities.
On Disk Utility, it said Macintosh HD was unmounted. Below that, under 'disk1' Mac OS X Install ESD appears and then below that under 'disk2' Mac OS X Base System is shown. I tried to mount the HD but it didn't work, and when I tried to repair the disk it said it couldn't be repaired and that I should back up my files. I do think my files are still present, I was able to access them on the Burn pane through the finder window. I then tried to reboot using the Macintosh HD startup disk but that then said it didn't have enough information to do so.
This person's problem (https://discussions.apple.com/thread/3192437) seemed almost identical to mine, however I have files I need and cannot afford to lose them. What do you suggest I do to retrieve my files? That is what I am solely concerned for right now. I backed up the most important files earlier, but I really do not want to lose everything.

Whatever you do, DO NOT REFORMAT THE DRIVE. You can just get a small <500Gb EXTERNAL bus powered drive, dismantle it and follow the instructions above. If you already have one then that's even better.
The drive I'm showing here is the drive that used to be inside of my computer. It took apart an old 320Gb seagate drive. The connections on these drives are all universally interchangeable. They just add some circuits and a USB (or other) interface. I would just get the cheapest drive that you can get that is for laptops and looks simple to take apart. (This is almost exactly the drive that I did this too http://www.amazon.com/Seagate-FreeAgent-Portable-External-ST903203FAA2E1-RK/dp/B 001FWIE0K/ref=sr_1_56?ie=UTF8&qid=1343340447&sr=8-56&keywords=seagate+external+h ard+drive)
The "old internal" drive should still be able to allow you to install ML on the "new" drive as long as you tell it to. It sounds complicated, but it's really not once you get in there and start doing it. It was actually quite easy.

Reset firefox , mint operating system and now can't access roboform

I reset firefox and now I can't access roboform.
I copied the extensions files from old data to new profile but made no difference.
I tried downloading roboform again and got a file called roboform-firefox.xpi but when I click on ot, it takes me to a new e-mail send form.
Please tell me how I can get robofrom back either by recovering or installing from the .xpi file

These can't get your data back, but will help in the future.
These add-ons can be a great help by backing up and restoring Firefox
'''[https://addons.mozilla.org/en-US/firefox/addon/febe/ FEBE (Firefox Environment Backup Extension)]''' {web link}
FEBE allows you to quickly and easily backup your
Firefox extensions, history, passwords, and more.
In fact, it goes beyond just backing up -- It will actually rebuild
your saved files individually into installable .xpi files.
It will also make backup of files that you choose.
'''[https://addons.mozilla.org/en-US/firefox/addon/opie/ OPIE]''' {web link}
Import/Export extension preferences

Windows 8 Upgrade and now can't access ICloud contacts or calendar

I just updated to Windows 8 and now I can't access my ICloud contacts or calendar in Outlook. Tells me "The set of folders cannot be opened. The information store could not be opened. Any suggestions or fixes?

Try temporarily recreating the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then use the password for your current ID to sign out of the account on your Mac (even if it prompts you for the password for the old ID). If you can sign out, choose Delete at all of the prompts (your data will still be in iCloud), then go back and change your ID back to the new email address again and sign in with it on your Mac.

Just upgraded and now can't access Yahoo IM. What an I do?

I just upgraded to the newest version of Mozilla and now I can't access Yahoo IM from my Yahoo mail page. I can open and close IM, but when I click on a contact to chat, nothing happens. I get no messenger window to type in and when people send me an IM, I have no window to reply. Help!

Hi icsailor,
This sounds like a known issue reported here:
https://bugzilla.mozilla.org/show_bug.cgi?id=713014
There was a workaround posted, but I've not tested it myself. Here are the steps.
# Go into Yahoo Messenger Options - Change the Window in the dropdown to Tab and press OK.
# Then go back and switch it to small window and press OK.
Once the bug is officially resolved, you could try running a Nightly or Aurora build to use the fix early.
Hopefully this helps!

RH8 Moved Source File - Moved it back and now can't access...Yikes

Similar Messages

Maybe you are looking for