RH9 publish to web server using HTTP

Good afternoon,
I'm attempting to upload a help site to a Windows IIS 7.5 web server. The failure message I receive is
Warning: Failed to publish to "Bid Manager Support". reason: Connection failed. Please check the connection and post again.
Native Error: Not Found.
All the settings are correct I think...
I've posted a pic below with the settings I'm using. I'm not posting the full hostname, however it is correct.
Any help on setting this up properly would be awesome.

I've also tried this setting as well

Similar Messages

Web Dynpro application calling external web server using HTTPS giving error

Hello,
I don't know whether this is the right question in this forum but my ABAP web-dynpro applicaiton is expected to call another HTTP application on external web server through HTTPS. Presently it is calling through plain HTTP but we want to have HTTPS.
Here are the steps that we followed based on the link from help.sap.com
1] Received the certificate files from external web server
2] Created SSL Anonymous client
3] Imported the certificate files under this client and added into the certificate list
4] Re-started ICM
5] Created RFC Destination of type HTTP to connect to external server with SSL option and basic authentication. This RFC destination was working under plain HTTP.
When tried with Test connection it gave error "ICM_HTTP_CONNECTION_FAILED".
Any idea what might be missing. Thanks in advance.
Regards
Rajeev

Used proper certificate after which the error went away

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I've created a CNAME entry to redirect the domain to apple but the site is still not live! Can anyone help please?
Did you also do what is required in the .Mac account settings?
http://help.apple.com/mac2/1/help/member/pgs2/memfmsetgen367.html
Could you provide your urls?

Dreamweaver CS3 fails when publishing to the web server using WebDAV

Dreamweaver CS3 fails when publishing to the web server using
WebDAV
using an earlier version (7.x/8.x) works fine.
Does anybody know if there is a solution for this.. This is
urgent..
Attempting to call the 1-800-833-6687 number fails with:
recording, music, rings as though someone will finally answer, but
gets a few dial tones and connection goes silent..
Thanks
J.

If all of your credentials are correct, Server Name/IP Address, Username, Password, Root Directory and it's still not connecting, I would try toggling the Passive FTP checkbox.
If you still can't connect in DW, try downloading a third party FTP program like Filezilla (free) and uploading there. If the third party app doesn't work either, there is likely a problem with your credentials and you would need to contact your hosting provider to straighten it out.

Resources for implementing HTTP web server using java

hi ,
Thanks for giving your precious time in reading the message.I want to build a HTTP web server using java,which will run on my machine and I can communicate with it through web browser(IE) using HTTP requests and response.
I know java language, but quite new to network programming.I want to gain enough knowledge on network programming in java.Can you please suggest me good books or any other resources available on the internet for the required subject.Any help will be greatly appreciated.
my email-id is : [email protected]

hi there my friend,
I am writing my own web server too. in w3c there is a sample web server called jigsaw-open source :) and simple-
I do think it worth trying.
you can contact me if you want to share some source and info. cause I will.
[email protected]
but within 2 weeks I will be back for studying for my web server. you have to wait for a while.

How to invoke a web service using https

Hi,
I have a few security related questions surrounding BPEL process manager.
1. Does the BPEL engine have the capability to invoke a web service using https (HTTP over SSL)? Does it automatically do that if partner link URI starts with https:// ?
2. If not, what needs to be done to enable accessing a https based web service?
3. I need to write a web service that accepts a message and updates certain information in the database. The web service will be deployed in an OC4J instance in Oracle App Server. We want to allow the web service to be accessed from BPEL only by users registered in the database. What is the recommended way to pass username and password to a webservice if service is invoked from BPEL process manager? Note that specifying username/password in bpel.xml is not an option.
Thanks,
Pranav

1. Does the BPEL engine have the capability to invoke a web service using https (HTTP over SSL)? Does it automatically do that if partner link URI starts with https:// ?
We currently don't have support for HTTP over SSl. We are working on it to include this functionality in near future.
2. If not, what needs to be done to enable accessing a https based web service?
I am not sure it is possible with current product offering. I will confirm it after discussing with our concerned development group. There is some work going to integrate with Oblix security mechanism [recently acquired by Oracle].
3. I need to write a web service that accepts a message and updates certain information in the database. The web service will be deployed in an OC4J instance in Oracle App Server. We want to allow the web service to be accessed from BPEL only by users registered in the database. What is the recommended way to pass username and password to a webservice if service is invoked from BPEL process manager? Note that specifying username/password in bpel.xml is not an option.
This will be easier to do if we can use Oblix along with BPEL PM. Could you please let us know more about your application so that we can provide you the customized solution till it's part of the product. You can send this query to [email protected] so that our product management team can give you more detailed roadmap regarding this.
HTH.
Thanks,
Rakesh

Post a File to a web server using HTTP_POST

Hello,
I have to generate a program to post a file ".TXT" to a web server using a HTTP POST with multipart form and a couple of variables (user, password).
I was investigating and I found that I can do it using SAPHTTP but I dont know how to work with the FM HTTP_POST.
Does anyone have a sample code?
Thanks
Ariel

sample usage:
CALL FUNCTION 'HTTP_POST'
    EXPORTING
      ABSOLUTE_URI                = IM_OFX_CONTROL_DATA-ADDRESS
      REQUEST_ENTITY_BODY_LENGTH = RESPONSE_ENTITY_BODY_LENGTH
      RFC_DESTINATION             = IM_OFX_CONTROL_DATA-HTTP_RFCDEST
      USER                        = IM_OFX_CONTROL_DATA-HTTP_USER
      PASSWORD                    = IM_OFX_CONTROL_DATA-HTTP_PASSWORD
      BLANKSTOCRLF                = 'X'
    IMPORTING
      STATUS_CODE                 = STATUS
      STATUS_TEXT                 = STATUS_TEXT
      RESPONSE_ENTITY_BODY_LENGTH = RLENGTH
    TABLES
      REQUEST_ENTITY_BODY         = LT_REQUEST
      RESPONSE_ENTITY_BODY        = RESPONSE
      RESPONSE_HEADERS            = LT_RESPONSE_HEADERS
      REQUEST_HEADERS             = LT_HTTP_HEADERS
   EXCEPTIONS
        OTHERS                      = 1.
Refer the programs:
LFPIFF02
LOFXALSU04
LPRGN_URL_RESPONSEU01
LSBCCU01
LSFTPU09
for some idea.
regards,
ravi

Unable to connect to the Exchange server using HTTP/HTTPS protocol.

hi,
i try to connect microsoft exchange server, but it give me
error
Unable to connect to the Exchange server using HTTP/HTTPS
protocol.
my code is pasted below............

<cfparam name="user1" default="uHRH">
<cfparam name="user2" default="uHRH">
<cfparam name="password" default="uHRH">
<cfparam name="exchangeServerIP" default="192.168.0.1">
<cftry>

<cfexchangeConnection
action="open"
username ="#user1#"
password="#password#"
server="#exchangeServerIP#"

connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" established</cfoutput>

<CFExchangeConnection
action="close"
connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" terminated</cfoutput>

<cfcatch type="any">
<cfoutput>#cfcatch.message#</cfoutput>
</cfcatch>
</cftry>
if any one know how to solve this error?

Hi,
The "<cfexchangeConnection>" tag supports both "HTTP"
and "HTTPS" connection.. So Please make sure the username has the
"Outlook Web Access".
Also try removing the 
comment which you placed inside the "<cfexchangeConnection>"
tag.

Can data be passed to an external web server using the "in-course web browsing" feature in ver. 7?

Can data be passed to an external web server using the "in-course web browsing" feature in ver. 7? I would like to display a simple web page, and I would like to pass to that web page the answers to all the quiz questions, quiz score, etc. In other words, instead of passing quiz results to a SCORM-compliant LMS like Moodle, I'd like to pass that data to a Drupal Webform using a URL like:
https://www.example.com/my-drupal-webform?param1=value1&param2=value2...&paramn=valuen
Is this possible?
Thanks,
John

You have to make sure every step in MOS Document ID 726414.1 that is applicable to your E-Business Suite 12.1.x release is performed. Enabling ASADMIN is just one of the steps. In spite of following all the steps in this Document you continue to get the error when clicking "Generate WSDL", please log a Service Request with Oracle Support.I will check all steps again. Maybe I missed one... Thanks!

Can I publish my RoboHelp project directly to a web server using the Generate Primary Layout (WebHelp) function?

I am hoping to improve my method of publishing my company
Knowledge Base.
Currently, I generate the RoboHelp layout to a folder on my
local computer and then manually upload the project output files to
our sever via SmartFTP. My question is how do I publish directly to
the server? Is this possible?
On the first page of the Generate Primary Layout "wizard", I
have entered the path to a local folder on my computer. Three
screens later in the Servers box of the "wizard", I have entered a
server and path, and checked its box. When I generated the output,
I expected it to be published to both locations: the local folder
and the web server folder. But it only publishes to the local
folder, not the web server.
How do I get it publish to the server also?
Any help is much appreciated. Thanks!
~Beth

I had been using the HTTP setting, so switched to FTP and
filled in server info. This time the Publish function began
working! However, the process has since hit a snafu.
Certain files are causing errors and I'm getting a message
such as this one:
Publishing has been cancelled. Failed to create file: image
235.jpg
When I click OK to the first error message, I then get this
one:
Publishing has been cancelled. Failed to create file:
bsscftp.txt
After clicking OK to the 2nd error msg, the Publish fails and
I get this:
Warning: Failed to publish to "help". reason: Canceled by
user.
I have run through the Publish a couple times now and various
files cause the 1st error, but the 2nd file is always that same txt
file. I realize this snafu may be particular to my situation but
any ideas?

Connection timeout when using iPlanet web-server uses Weblogic 6.1 proxy server to proxy requests to an HTTP server

Hi all,
My configuration is as follows: I have an iPlanet web-server that uses a WebLogic
6.1 (sp1) server to proxy requests to another HTTP server. The HTTP request runs
for 120 seconds. This causes Weblogic to timeout after a while. The error I get
is as follows:
<Aug 25, 2003 3:37:09 PM GMT+00:00> <Warning> <HttpClient> <Couldn't open connection
java.net.ConnectException: Connection timed out
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:320)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:133)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:120)
at java.net.Socket.<init>(Socket.java:273)
at java.net.Socket.<init>(Socket.java:127)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:194)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:254)
at weblogic.net.http.HttpClient.<init>(HttpClient.java:117)
at weblogic.net.http.HttpClient.New(HttpClient.java:149)
at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:109)
at com.db.gmr.dcm.DebtIssueServlet.getVectorFromConnection(DebtIssueServle
t.java:285)
at com.db.gmr.dcm.IssuesUSThread.run(IssuesUSThread.java:29)
>
I get the same error when I added the following plug-in configuration parameters
(in obj.conf):
ConnectTimeoutSecs="170" ConnectRetrySecs="170".
What do I need to do to extend this timeout? Any help you can provide will be
greatly appreciated..
Thanks
Manish

Hi all,
My configuration is as follows: I have an iPlanet web-server that uses a WebLogic
6.1 (sp1) server to proxy requests to another HTTP server. The HTTP request runs
for 120 seconds. This causes Weblogic to timeout after a while. The error I get
is as follows:
<Aug 25, 2003 3:37:09 PM GMT+00:00> <Warning> <HttpClient> <Couldn't open connection
java.net.ConnectException: Connection timed out
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:320)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:133)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:120)
at java.net.Socket.<init>(Socket.java:273)
at java.net.Socket.<init>(Socket.java:127)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:194)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:254)
at weblogic.net.http.HttpClient.<init>(HttpClient.java:117)
at weblogic.net.http.HttpClient.New(HttpClient.java:149)
at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:109)
at com.db.gmr.dcm.DebtIssueServlet.getVectorFromConnection(DebtIssueServle
t.java:285)
at com.db.gmr.dcm.IssuesUSThread.run(IssuesUSThread.java:29)
>
I get the same error when I added the following plug-in configuration parameters
(in obj.conf):
ConnectTimeoutSecs="170" ConnectRetrySecs="170".
What do I need to do to extend this timeout? Any help you can provide will be
greatly appreciated..
Thanks
Manish

How to Download a file from web server using servlets

how do we download a file from Java Web Server connecting to oracle database
it should start as soon a i click a button in my html browser
please reply as it is needed to complete my project to submited to the collage

With SQLJ you can do it.
When you look at:
http://otn.oracle.com/sample_code/tech/java/sqlj_jdbc/files/basic/basic.htm
or
http://otn.oracle.com/sample_code/tech/java/sqlj_jdbc/files/advanced/advanced.htm
There are samples for reading LONGRAW / BLOB from Database. If you want use it in servlet you have to pass the result to the responce object, set the correct mime-type and set the response.setContentLength( xx). This is for some PlugIns nessessary (pdf).
regards Dietmar

Trying to publish a web gallery using iPhoto '08 version 7.1.1.

I have recently been getting the following message while trying to publish a web gallery through iPhoto:
Request to the server http://publish.me.com failed.
And all the pictures go "pending" without ever getting published. My mobileme membership is current and I make sure I am online while I try to publish. I have published web galleries before, this has happened only recently.
Any ideas?

I'm receiving the same issue. I haven't tried to upload a new gallery for awhile. The only change (although a big one) I've made to my system since was upgrading to Snow Leopard. I'm still running iPhoto '08 and my mobileme account is current.

Security Filtering on the v7 Web Server using sed_request

I have been trying to improve protection of an application from cross-site scripting and SQL injection attackes. The ideal solution is the modsecurity rulebase but this is for Apache 2 only so I haev been looking for other solutions. I'm not going to guarantee all of the following since I haven't finished testing it but it looks hopeful so far as an avenue for investigation.
A direct port of the modsecurity engine to the Sun One / iPlanet web server has been started, with an unsupported implementation with near complete functionality in the version 7 codebase, but not all keywords required for the rules are available in this release and it remains unsupported for production use. A simpler but fully supported solution is the sed filter; which is also provided with the version 7 product, but as a separate NSAPI plugin implementing the sed_request and sed_response server application functions (SAFs) which could theoretically be lifted out and run against earlier versions of the web server.
So, how does the sed filter help? Well, although the functionality is less than that of the full modsecurity engine and performance is more limited, as implementing the Unix stream editor (sed) support for simple basic regular expressions it is possible to port some of the key modsecurity rules. The approach is a simple one:
* Choose the key rules for modsecurity that are to implemented, e.g. SQL injection, cross-site scripting, etc
* Open the rule set for each and copy out the extended regular expression
* Translate the extended regular expression to a standard basic regular expression, including replacing the found string with nothing
* Import the new sed rule into the obj.conf for the web server instance
This is best explained with a simple example.
First download the modsecurity source code from http://www.modsecurity.org and unpackage the tarball. In the resulting directory tree go to the rules/base_rules subdirectory and open the modsecurity_crs_41_sql_injection_attacks.conf file. In this file are a number of security rules defined, but a simple examination of each will show the format, the phase and a description after the SecRule keyword and some type information. Note that many of the security rules can be applied unchanged by the unsupported Sun One / iPlanet modsecurity engine that will be a full implementation in a future release. After the type information the extended regular expression used to define when the rule is to be applied can be found. For example, consider one SQL injection rule:
SecRule REQUEST_FILENAME|ARGS_NAMES|ARGS|XML:/* "\buser_tab_columns\b" \
"phase:2,rev:'2.0.5',capture,t:none,ctl:auditLogParts=+E,pass,no
log,auditlog,msg:'Blind SQL Injection Attack',id:'959536',tag:'WEB_ATTACK/SQL_INJECTION',tag:'WASCTC/WASC-19',tag:'OWASP_TOP_10/A1',tag:'OWASP_AppSensor/CIE1',tag:'PCI/6.5.2',logdata:'%{TX.0}',severity:'2',setvar:'tx.msg=%{rule.msg}',setvar
:tx.sql_injection_score=+%{tx.critical_anomaly_score},setvar:tx.anomaly_score=+%
{tx.critical_anomaly_score},setvar:tx.%{rule.id}-WEB_ATTACK/SQL_INJECTION-%{matched_var_name}=%{tx.0}"
In this the extended regular expression saying when this rule applies is "\buser_tab_columns\b"
which tells the rules engine to look for the phrase user_tab_columns in the input stream.
We want to replace this with nothing, so a sample sed rule for this would be
sed="s/\buser_tab_columns\b//g"
This says to replace all occurences found in the stream with nothing.
Taking this to its extreme, which will not result in the fastest processing, but will ptotect from cross-site scripting and SQL injection POST attacks against a back end Oracle environment, we end up with a complex segment of an obj.conf for Oracle iPlanet Web Server 7.09. Details are in the next post.

This is something like:
<Object name="default">
Input fn="insert-filter"
method="(GET|POST|HEAD)"
filter="sed-request"
sed="s/</\\</g"
sed="s/%3c/\\</g"
sed="s/%3C/\\</g"
sed="s/>/\\>/g"
sed="s/%3e/\\>/g"
sed="s/%3E/\\>/g"
sed="s/\x2Eexecscript\b//g"
sed="s/<body\b.*?\bonload\b//g"
sed="s/\blivescript://g"
sed="s/\bsettimeout\b[^a-zA-Z_0-9]*?//g"
sed="s/\x3C ?iframe//g"
sed="s/\bsrc\b[^a-zA-Z_0-9]*?\bjavascript://g"
sed="s/\bsrc\b[^a-zA-Z_0-9]*?\bvbscript://g"
sed="s/\btype\b[^a-zA-Z_0-9]*?\btext\b[^a-zA-Z_0-9]*?\becmascript\b//g"
sed="s/\x2Ecookie\b//g"
sed="s/\x3C\x21\x5Bcdata\x5B//g"
sed="s/\x2Eaddimport\b//g"
sed="s/\bhref\b[^a-zA-Z_0-9]*?\bjavascript://g"
sed="s/\btype\b[^a-zA-Z_0-9]*?\btext\b[^a-zA-Z_0-9]*?\bjscript\b//g"
sed="s/\balert\b[^a-zA-Z_0-9]*?\x28//g"
sed="s/\btype\b[^a-zA-Z_0-9]*?\bapplication\b[^a-zA-Z_0-9]*?\bx-vbscript\b//g"
sed="s/\x3C ?meta\b//g"
sed="s/\bsrc\b[^a-zA-Z_0-9]*?\bhttp://g"
sed="s/\btype\b[^a-zA-Z_0-9]*?\btext\b[^a-zA-Z_0-9]*?\bvbscript\b//g"
sed="s/\bhref\b[^a-zA-Z_0-9]*?\bvbscript://g"
sed="s/\burl\b[^a-zA-Z_0-9]*?\bjavascript://g"
sed="s/\x2Einnerhtml\b//g"
sed="s/\x40import\b//g"
sed="s/\x3C ?script\b//g"
sed="s/\btype\b[^a-zA-Z_0-9]*?\btext\b[^a-zA-Z_0-9]*?\bjavascript\b//g"
sed="s/\x2Efromcharcode\b//g"
sed="s/\burl\b[^a-zA-Z_0-9]*?\bvbscript://g"
sed="s/\bsettimeout\b[^a-zA-Z_0-9]*?\x28//g"
sed="s/<(a|abbr|acronym|address|applet|area|audioscope|b|base|basefront|bdo|bgsound|big|blackface|blink|blockquote|body|bq|br|button|caption|center|cite|code|col|colgroup|comment|dd|del|dfn|dir|div|dl|dt|em|embed|fieldset|fn|font|form|frame|frameset|h1|head|hr|html|i|iframe|ilayer|img|input|ins|isindex|kdb|keygen|label|layer|legend|li|limittext|link|listing|map|marquee|menu|meta|multicol|nobr|noembed|noframes|noscript|nosmartquotes|object|ol|optgroup|option|p|param|plaintext|pre|q|rt|ruby|s|samp|script|select|server|shadow|sidebar|small|spacer|span|strike|strong|style|sub|sup|table|tbody|td|textarea|tfoot|th|thead|title|tr|tt|u|ul|var|wbr|xml|xmp)[^a-zA-Z_0-9]//g"
sed="s/(asfunction|javascript|vbscript|data|mocha|livescript)://g"
sed="s/(fromcharcode|alert|eval)\x73*\x28//g"
sed="s/<!\x5Bcdata\x5B|\x5D>//g"
sed="s/['\"<]xss['\">]//g"
sed="s/(88,83,83)//g"
sed="s/'';!--\"<xss>=&{()}//g"
sed="s/&{//g"
sed="s/<!(doctype|entity)//g"
sed="s/(?i:<style.*?>.*?((@[i\\\\])|(([:=]|(&[#\x28\x29=]x?0*((58)|(3A)|(61)|(3D));?)).*?([(\\\\]|(&[#()=]x?0*((40)|(28)|(92)|(5C));?)))))//g"
sed="s/(?i:[ /+\t\"\'`]style[ /+\t]*?=.*?([:=]|(&[#()=]x?0*((58)|(3A)|(61)|(3D));?)).*?([(\\\\]|(&[#()=]x?0*((40)|(28)|(92)|(5C));?)))//g"
sed="s/(?i:<object[ /+\t].*?((type)|(codetype)|(classid)|(code)|(data))[ /+\t]*=)//g"
sed="s/(?i:[ /+\t\"\'`]datasrc[ +\t]*?=.)//g"
sed="s/(?i:<base[ /+\t].*?href[ /+\t]*=)//g"
sed="s/(?i:<link[ /+\t].*?href[ /+\t]*=)//g"
sed="s/(?i:<meta[ /+\t].*?http-equiv[ /+\t]*=)//g"
sed="s/(?i:<?import[ /+\t].*?implementation[ /+\t]*=)//g"
sed="s/(?i:<embed[ /+\t].*?SRC.*?=)//g"
sed="s/(?i:[ /+\t\"\'`]on\x63\x63\x63+?[ +\t]*?=.)//g"
sed="s/(?i:<?frame.*?[ /+\t]*?src[ /+\t]*=)//g"
sed="s/(?i:<isindex[ /+\t>])//g"
sed="s/(?i:<form.*?>)//g"
sed="s/(?i:<script.*?[ /+\t]*?src[ /+\t]*=)//g"
sed="s/(?i:<script.*?>)//g"
sed="s/(?i:[\"\'][ ]*(([^a-z0-9~_:\'\" ])|(in)).*?(((l|(\\\\u006C))(o|(\\\\u006F))(c|(\\\\u0063))(a|(\\\\u0061))(t|(\\\\u0074))(i|(\\\\u0069))(o|(\\\\u006F))(n|(\\\\u006E)))|((n|(\\\\u006E))(a|(\\\\u0061))(m|(\\\\u006D))(e|(\\\\u0065)))).*?=)//g"
sed="s/(?i:[\"\'][ ]*(([^a-z0-9~_:\'\" ])|(in)).+?(([.].+?)|([\x5B].*?[\x5D].*?))=)//g"
sed="s/\bsys\x2Euser_catalog\b//g"
sed="s/\bsys\x2Euser_tables\b//g"
sed="s/\bcharindex\b//g"
sed="s/\bsys\x2Eall_tables\b//g"
sed="s/\bsys\x2Euser_constraints\b//g"
sed="s/\bselect\b.{0,40}buser\b//g"
sed="s/\bwaitfor\b[^a-zA-Z_0-9]*?\bdelay\b//g"
sed="s/\bselect\b.{0,40}\bsubstring\b//g"
sed="s/\bsys\x2Euser_triggers\b//g"
sed="s/\blocate[^a-zA-Z_0-9]+\x28//g"
sed="s/\bsys\x2Euser_tab_columns\b//g"
sed="s/\battnotnull\b//g"
sed="s/\bsys\x28tab\b//g"
sed="s/\bselect\b.{0,40}\bascii\b//g"
sed="s/\bsys\x2Euser_views\b//g"
sed="s/\binstr[^a-zA-Z_0-9]+\x28//g"
sed="s/\bsys\x2Euser_objects\b//g"
sed="s/\buser_tables\b//g"
sed="s/\buser_tab_columns\b//g"
sed="s/\ball_objects\b//g"
sed="s/\bsubstr\b//g"
sed="s/\bsysdba\b//g"
sed="s/\btextpos[^a-zA-Z_0-9]+\x28//g"
sed="s/\buser_password\b//g"
sed="s/\buser_users\b//g"
sed="s/\buser_constraints\b//g"
sed="s/\bcolumn_name\b//g"
sed="s/\bsubstring\b//g"
sed="s/\bobject_type\b//g"
sed="s/\bobject_id\b//g"
sed="s/\buser_ind_columns\b//g"
sed="s/\bcolumn_id\b//g"
sed="s/\btable_name\b//g"
sed="s/\bobject_name\b//g"
sed="s/\brownum\b//g"
sed="s/\buser_group\b//g"
sed="s/\butl_http\b//g"
sed="s/\bselect\b.*?\bto_number\b//g"
sed="s/\bgroup\b.*\bbyb.{1,100}?\bhaving\b//g"
sed="s/\bselect\b.*?\bdata_type\b//g"
sed="s/\bisnull\b[^a-zA-Z_0-9]*?\x28//g"
sed="s/\bunion\b.{1,100}?\bselect\b//g"
sed="s/\binsert\b[^a-zA-Z_0-9]*?\binto\b//g"
sed="s/\bselect\b.{1,100}?\bcount\b.{1,100}?\bfrom\b//g"
sed="s/\x3B[^a-zA-Z_0-9]*?\bdrop\b//g"
sed="s/\bloadb[^a-zA-Z_0-9]*?\bdata\b.*\binfile\b//g"
sed="s/\bselect\b.*?\bto_char\b//g"
sed="s/\bdbms_java\b//g"
sed="s/\bnvarchar\b//g"
sed="s/\butl_file\b//g"
sed="s/\binner\b[^a-zA-Z_0-9]*?\bjoin\b//g"
sed="s/\bselect\b.{1,100}?\bfrom\b.{1,100}?\bwhere\b//g"
sed="s/\bintob[^a-zA-Z_0-9]*?\bdumpfile\b//g"
sed="s/\bdelete\b[^a-zA-Z_0-9]*?\bfrom\b//g"
sed="s/\x3B[^a-zA-Z_0-9]*?\bshutdown\b//g"
sed="s/\bautonomous_transaction\b//g"
sed="s/\bdba_users\b//g"
sed="s/\bselect\b.{1,100}?\btop\b.{1,100}?\bfrom\b//g"
sed="s/\b(?:coalesce\b|root\x40)//g"
sed="s/\b(?:(?:rel(?:(?:nam|typ)e|kind)|to_(?:numbe|cha)r|d(?:elete|rop)|group\b[^a-zA-Z_0-9]*\bby|insert|where)\b|s(?:(?:ubstr(?:ing)?|leep)[^a-zA-Z_0-9]+\x28|(?:hutdown|elect)\b)|(?:b(?:enchmark|in)|find_in_set|position|mid)[^a-zA-Z_0-9]+\x28|c(?:o(?:n(?:cat[^a-zA-Z_0-9]+\x28|vert\b)|unt\b)|ha?r\b)|u(?:n(?:hex[^a-zA-Z_0-9]+\x28|ion\b)|pdate\b)|l(?:o(?:cate|wer)[^a-zA-Z_0-9]+\x28|ength\b)|a(?:ttn(?:ame|um)\b|scii[^a-zA-Z_0-9]+\x28)|h(?:aving\b|ex[^a-zA-Z_0-9]+\x28))//g"
sed="s/(?:[\\\x28\x29\x25#]|--)//g"
sed="s/\b(?:benchmark|encode)\b//g"

Sun java web server - using a lot of memory

sjws 6.1sp7 - solaris 10u4
we have a web server instance that uses over 3gb of ram. it servers mostly jsps. i understand why permanent heap is so large (jsp classes) any one have an idea of what else could be going on here?
17921 webservd 3271M 2976M cpu1 0 10 9:05:55 31% webservd/80
pmap shows (cut down for length):
00010000 8K r-x-- /opt/jws61/bin/https/bin/webservd
00020000 8K rwx-- /opt/jws61/bin/https/bin/webservd
00022000 1171168K rwx-- [ heap ]
< snip, and a bunch of the following >
74000000 5440K r--s- dev:314,2 ino:6823381
74560000 120K r--s- dev:314,2 ino:6823394
74590000 408K r--s- dev:314,2 ino:6823341
74600000 464K r--s- dev:314,2 ino:6823383
74680000 2192K r--s- dev:314,2 ino:6823304
748B0000 72K r--s- dev:314,2 ino:6823307
748D0000 144K r--s- dev:314,2 ino:6823286
74900000 1264K r--s- dev:314,2 ino:6823418
74A50000 160K r--s- dev:314,2 ino:6823345
74A80000 552K r--s- dev:314,2 ino:6823276
74B10000 8K r--s- dev:314,2 ino:6823327
74B20000 352K r--s- dev:314,2 ino:6823280
74B80000 832K r--s- dev:314,2 ino:6823319
74C60000 104K r--s- dev:314,2 ino:6823324
74C80000 504K r--s- dev:314,2 ino:6823337
74D10000 352K r--s- dev:314,2 ino:6823283
74D70000 32K r--s- dev:314,2 ino:6823406
74D80000 664K r--s- dev:314,2 ino:6823271
74E30000 16K r--s- dev:314,2 ino:6823314
74E40000 40K r--s- dev:314,2 ino:6823349
74E50000 32K r--s- dev:314,2 ino:6823404
74E60000 104K r--s- dev:314,2 ino:6823278
74E80000 584K r--s- dev:314,2 ino:6823347
74F20000 312K r--s- dev:314,2 ino:6823248
74F80000 1808K r--s- dev:85,40 ino:3471
75150000 80K r--s- dev:314,2 ino:6823373
< snip, and then what appears to be taking up most of the memory >
96800000 20480K rwx-- [ anon ]
97C00000 20480K rwx-- [ anon ]
99000000 20480K rwx-- [ anon ]
9A400000 28672K rwx-- [ anon ]
9C000000 4096K rwx-- [ anon ]
9C400000 4096K rwx-- [ anon ]
9C800000 4096K rwx-- [ anon ]
9CC00000 28672K rwx-- [ anon ]
9E800000 8192K rwx-- [ anon ]
9F000000 8192K rwx-- [ anon ]
9F800000 24576K rwx-- [ anon ]
A1000000 4096K rwx-- [ anon ]
A1400000 4096K rwx-- [ anon ]
A1800000 12288K rwx-- [ anon ]
A2400000 40960K rwx-- [ anon ]
A4C00000 8192K rwx-- [ anon ]
A5400000 16384K rwx-- [ anon ]
A6400000 24576K rwx-- [ anon ]
A7C00000 40960K rwx-- [ anon ]
AA400000 20480K rwx-- [ anon ]
AB800000 12288K rwx-- [ anon ]
AC400000 20480K rwx-- [ anon ]
AD800000 4096K rwx-- [ anon ]
ADC00000 36864K rwx-- [ anon ]
B0000000 4096K rwx-- [ anon ]
B0400000 16384K rwx-- [ anon ]
B1400000 4096K rwx-- [ anon ]
B1800000 8192K rwx-- [ anon ]
B2000000 45056K rwx-- [ anon ]
B4C00000 12288K rwx-- [ anon ]
B5800000 4096K rwx-- [ anon ]
B5C00000 12288K rwx-- [ anon ]
B6800000 16384K rwx-- [ anon ]
B7800000 4096K rwx-- [ anon ]
B7C00000 4096K rwx-- [ anon ]
B8000000 4096K rwx-- [ anon ]
B8400000 4096K rwx-- [ anon ]
B8800000 4096K rwx-- [ anon ]
B8C00000 4096K rwx-- [ anon ]
#/usr/jdk/j2sdk1.4.2_16/bin/jmap -heap 17921
Attaching to process ID 17921, please wait...
Debugger attached successfully.
Server compiler detected.
JVM version is 1.4.2_13-b06
using thread-local object allocation.
Mark Sweep Compact GC
Heap Configuration:
MinHeapFreeRatio = 40
MaxHeapFreeRatio = 70
MaxHeapSize = 67108864 (64.0MB)
NewSize = 2228224 (2.125MB)
MaxNewSize = 4294901760 (4095.9375MB)
OldSize = 1441792 (1.375MB)
NewRatio = 2
SurvivorRatio = 32
PermSize = 16777216 (16.0MB)
MaxPermSize = 1073741824 (1024.0MB)
Heap Usage:
New Generation (Eden + 1 Survivor Space):
capacity = 347406336 (331.3125MB)
used = 163723696 (156.1390838623047MB)
free = 183682640 (175.1734161376953MB)
47.1274352348024% used
Eden Space:
capacity = 336920576 (321.3125MB)
used = 163723696 (156.1390838623047MB)
free = 173196880 (165.1734161376953MB)
48.59415175640683% used
From Space:
capacity = 10485760 (10.0MB)
used = 0 (0.0MB)
free = 10485760 (10.0MB)
0.0% used
To Space:
capacity = 10485760 (10.0MB)
used = 0 (0.0MB)
free = 10485760 (10.0MB)
0.0% used
tenured generation:
capacity = 715849728 (682.6875MB)
used = 645847144 (615.9278335571289MB)
free = 70002584 (66.7596664428711MB)
90.22105041576548% used
Perm Generation:
capacity = 895221760 (853.75MB)
used = 894921568 (853.4637145996094MB)
free = 300192 (0.286285400390625MB)
99.96646730302892% used

It usually takes about 24 hours to get there. It is easily reproducible. "Kill -3" is not leaving a javacore for some reason.
The applications are mostly jsp, and are all over the board. There is a lot of XML parsing, some db connections, and all sorts of other home grown things. However, if the jsp applications were leaking would that not be in the heap?
How would I hunt down these allocations?
A2400000 40960K rwx-- [ anon ]
A4C00000 8192K rwx-- [ anon ]
A5400000 16384K rwx-- [ anon ]
A6400000 24576K rwx-- [ anon ]
A7C00000 40960K rwx-- [ anon ]
AA400000 20480K rwx-- [ anon ]
AB800000 12288K rwx-- [ anon ]
###server.xml
<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE SERVER PUBLIC "-//Sun Microsystems Inc.//DTD Sun ONE Web Server 6.1//EN" "file:///opt/jws61/bin/https/dtds/sun-web-server_6_1.dtd" >
<SERVER>
    <PROPERTY name="docroot" value="/xxxxxweb/xxx"/>
    <PROPERTY name="accesslog" value="/data/logs/xxxxx/access"/>
    <PROPERTY name="user" value=""/>
    <PROPERTY name="group" value=""/>
    <PROPERTY name="chroot" value=""/>
    <PROPERTY name="dir" value=""/>
    <PROPERTY name="nice" value=""/>
    <LS id="ls1" port="92" servername="xxxxx" defaultvs="https-bamxxx"/>
    <MIME id="mime1" file="mime.types"/>
    <ACLFILE id="acl1" file="/opt/jws61/httpacl/generated.https-xxxxx.acl"/>
    <VSCLASS id="vsclass1" objectfile="obj.conf">
        <VS id="https-xxxxx" connections="ls1" mime="mime1" aclids="acl1" >
            <PROPERTY name="docroot" value="/xxxxxweb/xxx"/>
            <WEBAPP uri="/" path="/xxxxxweb/xxx" enabled="true"/>
        </VS>
    </VSCLASS>
<JAVA javahome="/usr/jdk/j2sdk1.4.2_13" serverclasspath="/opt/jws61/bin/https/jar/webserv-rt.jar:${java.home}/lib/tools.jar:/opt/jws61/bin/https/jar/webserv-ext.jar:/opt/jws61/bin/https/jar/webserv-jstl.jar:/opt/jws61/bin/https/jar/ktsearch.jar:/opt/oracle/product/9.2.0/jdbc/lib/ojdbc14.jar:/opt/oracle/product/9.2.0/jdbc/lib/nls_charset12.jar:/opt/oracle/product/9.2.0/jdbc/lib/ocrs12.jar" classpathsuffix="" envclasspathignored="true" nativelibrarypathprefix="/opt/oracle/product/9.2.0/lib32" debug="false" debugoptions="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n" dynamicreloadinterval="-1">
        
        <JVMOPTIONS>-Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager</JVMOPTIONS>
        <JVMOPTIONS>-Djava.awt.headless=true</JVMOPTIONS>
        <JVMOPTIONS>-server</JVMOPTIONS>
        <JVMOPTIONS>-Xmx1024m</JVMOPTIONS>
        <JVMOPTIONS>-Xms96m</JVMOPTIONS>
        <JVMOPTIONS>-Xrs</JVMOPTIONS>
        <JVMOPTIONS>-XX:MaxPermSize=1024m</JVMOPTIONS>
        <JVMOPTIONS>-Denv=proddc2split</JVMOPTIONS>
        <JVMOPTIONS>-Dhttp.proxyHost=proxy-vip.xxxops.com</JVMOPTIONS>
        <JVMOPTIONS>-Dhttp.proxyPort=3128</JVMOPTIONS>
        <JVMOPTIONS>-Dhttps.proxyHost=proxy-vip.xxxops.com</JVMOPTIONS>
        <JVMOPTIONS>-Dhttps.proxyPort=3128</JVMOPTIONS>

        <SECURITY defaultrealm="native" anonymousrole="ANYONE" audit="false">
            <AUTHREALM name="file" classname="com.iplanet.ias.security.auth.realm.file.FileRealm">
              <PROPERTY name="file" value="/opt/jws61/https-xxxxx/config/keyfile"/>
              <PROPERTY name="jaas-context" value="fileRealm"/>
            </AUTHREALM>
            <AUTHREALM name="native" classname="com.iplanet.ias.security.auth.realm.webcore.NativeRealm">
              <PROPERTY name="jaas-context" value="nativeRealm"/>
            </AUTHREALM>
            
            
        </SECURITY>
        <RESOURCES>
        </RESOURCES>
    </JAVA>
    <LOG file="/data/logs/xxxxx/errors" loglevel="info"/>
</SERVER>###magnus.conf
# The NetsiteRoot, ServerName, and ServerID directives are DEPRECATED.
# They will not be supported in future releases of the Web Server.
NetsiteRoot /opt/jws61
ServerName entertainment
ServerID https-xxxxxx
RqThrottle 128
DNS off
Security off
PidLog /opt/jws61/https-xxxxxx/logs/pid
User webservd
StackSize 131072
TempDir /tmp/https-xxxxxx-ba138622
CGIWaitPid on
KeepAliveThreads 4
KeepAliveTimeout 30
KernelThreads off
MaxKeepAliveConnections 256
MaxProcs 1
UseNativePoll on
Init fn=flex-init access="$accesslog" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length%"
Init fn="load-modules" shlib="/opt/jws61/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"###obj.conf
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="redirect" from="/NASApp/xxx/" url-prefix="/"
NameTrans fn="ntrans-j2ee" name="j2ee"
NameTrans fn=pfx2dir from=/mc-icons dir="/opt/jws61/ns-icons" name="es-internal"
NameTrans fn=document-root root="$docroot"
PathCheck fn=unix-uri-clean
PathCheck fn="check-acl" acl="default"
PathCheck fn=find-pathinfo
PathCheck fn=find-index index-names="index.html,home.html,index.jsp"
ObjectType fn=type-by-extension
ObjectType fn=force-type type=text/plain
Service method=(GET|HEAD) type=magnus-internal/imagemap fn=imagemap
#Service method=(GET|HEAD) type=magnus-internal/directory fn=index-common
Service method=(GET|HEAD) type=magnus-internal/directory fn=send-error code=404 path="404.html"
Service method=(GET|HEAD|POST) type=*~magnus-internal/* fn=send-file
Service method=TRACE fn=service-trace
Error fn="error-j2ee"
Error fn=send-error code=404 path="/xxxxxxweb/xxx/404.html"
Error fn=send-error code=405 path="/xxxxxxweb/xxx/404.html"
Error fn=send-error code=500 path="/xxxxxxweb/xxx/500.html"
AddLog fn=flex-log name="access"
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="cgi">
ObjectType fn=force-type type=magnus-internal/cgi
Service fn=send-cgi user="$user" group="$group" chroot="$chroot" dir="$dir" nice="$nice"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="send-compressed">
PathCheck fn="find-compressed"
</Object>
<Object name="compress-on-demand">
Output fn="insert-filter" filter="http-compression"
</Object>
<Object ppath="*.xml">
AuthTrans fn="set-variable" insert-srvhdrs="Cache-Control: max-age=60"
AuthTrans fn="set-variable" insert-srvhdrs="Edge-Control: max-age=60"
</Object>

RH9 publish to web server using HTTP

Similar Messages

Maybe you are looking for