RHCDOC_DISPLAY - any cluster for directly accessing changes?

Hi
Does anyone know whether the HRP Infotype changes as reported by program 'RHCDOC_DISPLAY' are stored in a particular table or cluster?
The HR Infotype logged changes are stored in PCL4, but I can't seem to find an equivalent for the PD changes?
We need to try to access the data for reporting on an interface file.
Cheers
Phil

Hi,
Try table CDHDR.
Hope this helps.
Donnie

Similar Messages

My iCloud on my phone is undJer another persons account I however am no longer with them and want to cut all ties and is there any way for me to change my iCloud account or will it affect my phone? And it's photos, apps, music?

My iCloud on my phone is under another persons account I however am no longer with them and want to cut all ties and is there any way for me to change my iCloud account or will it affect my phone? And it's photos, apps, music?

You have to delete the iCloud account but you can keep all your data such as Contacts, Calendars etc. when you delete the account you will prompted to "Keep on my iPhone".
All your purchased content (like apps and music from iTunes Store) belongs to the original ID and you have to re-Purchase them under your Apple ID.
Photos in Camera Roll remains in Camera Roll.
Photos in photo stream that are not in Camera Roll must be saved in Camera Roll.
Photo that previously synced from iTunes remains in photo library until you synced with another iTunes library (another computer).
Also sign out from iMessages, FaceTime and Home sharing (Settings>Music)

Logical link / Work center for directly accessing "Business Activities"

Hi All,
We are upgrading from CRM 5.0 to CRM 2007. One unique challenge that I have encountered is the access to search, change or create - BUSINESS ACTIVITIES (Leading Transaction category: BUS2000126) in the CRM Web UI. We would like to directly access Business activities through a work center -> Logical link or a Logical link, in the SALESPRO business role.
This is available in the IC_AGENT business role. But you need to create a preceding Interaction record and then create a followup activity -> Business activity. We do not want to do this. We want to be able to access the business activites directly. For example, Leads and Opportunities can be accessed directly through the work Center: "Sales Cycle".
Does anyone know if there is a work center that I can use in SALESPRO business role that will give me direct access to Business Activities . I can use the transaction launcher to access the HTML version of the winclient transaction (T Code: (CRMD_BUS2000126) but I do not want to use the transaction launcher. Any ideas?

Well I am pretty Serious?!!!
The standard SAP delivered "ACTIVITIES" WORK CENTER has the following Logical links for CREATE:
Activity
Activity Scheduling
Activity Template
Appointment
E-Mail
Interaction Log
Task
Visit Plan
And when you use the Activity create - you ONLY have the option to create:
Interaction log - Channel report
Interaction log - Partner report
Task - Approve
Task - Recurring Task
I would expect to see more than this. There are other BUS2000126 Business Activity transaction types which are enable to be maintained online in SPRO. But they do not show up here. I can use the Search - Activity logical link and then use Activity Type to find the other Transaction types. But not in Create. I can control the transaction types that can be displayed for Leads and Opportunities. It doesn't seem to work for Activities!!!!
Is this part of standard CRM 2007 SALESPRO delivered role functionality??? I have SAP_ALL and SAP_NEW and have access to the other Business activities in my security role. My Ophthamologist did confirm that my eyes are doing fine so far. So this has something to do with the way this 'Work Center' has been designed. Apart physiological/anatomical impediments what am I missing???
Thanks,
Ramesh

LAN side firewall settings for Direct Access (Windows Server 2012 R2) in DMZ?

I am currently planning to set up our first Direct Access server (Windows Server 2012 R2). I will be in our firewall DMZ and we will be using the IP-HTTPS listener.
For the Internet facing rule only TCP 443 inbound/outbound is sufficient but for the LAN facing rules (not talking about the Windows server firewall) what would be the recommended firewall rules for a Direct Access server? Is there a best practice guideline
to follow for this? Appreciate any advice or comments. Thank you.

Hi Barkley
Please see this Technet Link which will backup your requirements - https://technet.microsoft.com/en-gb/library/jj574101.aspx
Section Reads -
When using additional firewalls, apply the following internal network firewall exceptions for Remote Access traffic:
ISATAP—Protocol 41 inbound and outbound
TCP/UDP for all IPv4/IPv6 traffic
Also another link from http://www.ironnetworks.com/blog/directaccess-network-deployment-scenarios#.VO3tfvmsVrU
"I have had a number of conversations with security administrators and network architects who have expressed a desire to place the DirectAccess server between two firewalls (firewall sandwich) in order to explicitly control access from the DirectAccess
server to the internal corporate network. While at first this may sound like a sensible solution, it is often quite problematic and, in my opinion, does little to improve the overall security of the solution. Restricting network access from the DirectAccess
server to the internal LAN requires so many ports to be opened on the inside firewall that the benefit of having the firewall is greatly diminished. Placing the DirectAccess server’s internal network interface on the LAN unrestricted is the best configuration
in terms of supportability and provides the best user experience."
Kindest Regards
John Davies
Thank for your reply and information John. I find it somewhat disappointing that Microsoft does not provide much more in the way of documentation and information regarding this topic. I required more information to show to our security team so they will allow
us to have the internal facing NIC not have more restrictive rules in place as it is a security concern.

Any tricks for quick access to IP6 Plus while backpacking?

Such a large beast, anyone found an around the neck or backpack strap attachment to allow for easy access to an IPhone 6 PLUS? A fanny pack turned around seems awfully bulky. I've not been able to find anything... Any ideas or products? Thanks

All you do is click this link
http://bit.ly/1Gj4k4m

Any possibility for loading and changing XFL/... data at run time of Flash app?

Hi everybody,
I have a quick and general question for the following case:
I want to produce some transitions and effects for a kinetic typography project in After Effects and then import these parts into Flash Professional via XFL and Bridge.
So my actual problem is this one: my Flash application should be able to load these made transitions and effects dynamically at run-time and not from a pre-configured timeline made upfront. Because there should be dynamic text fields in these XFL data from After Effects I also need to be loaded at run-time for the kinetic typography thing.
So is there any possible way to do / load / change the dynamic text fields in these XFL data or the order of all transitions and effects in Flash Professional at run-time or anything else?
I know this is a special question, but I hope there would be an answer...
Thanks for your help in advance
Regards,
Kevin

Something along this model is what I had in mind:
public class MainPanel extends JPanel
    private DrawPanel drawPanel = new DrawPanel();
    private JComboBox comboLeft = new JComboBox();
    private JComboBox comboRight = new JComboBox();
    public MainPanel()
        // add drawpanel and comboboxes to main panel
        // add item listener to comboboxes
    private class ComboListener implements ItemListener
        @Override
        public void itemStateChanged(ItemEvent arg0)
            if (...) // both comboboxes changed
                // get values from comboboxes
                drawPanel.setValues(left, right); // call drawpanel's method
public class DrawPanel extends JPanel
    private int left = 0;
    private int right = 0;
    public DrawPanel()
        //setPreferredSize(....); // set panel size
    @Override
    protected void paintComponent(Graphics g)
        super.paintComponent(g);
        //... draw the line depending on the left and right value
    public void setValues(int left, int right)
        this.left = left;
        this.right = right;
        repaint();
}

Is there any link for direct download of iOS 6.1.3?

iOS 6.1.3 is a large file. It takes approximately 12 hours due to I am using 256kbps line. I couldn't download it due to some iTunes error, Power cutoff etc. If there is any torrent file or direct download link, please post it.

Mkabir wrote:
Thanks for reply. In that regards size doesn't matter. Download can began afterwards. Please give me the link if possible.
I don't have one. Nor does your response make any sense. Of course the size of the file matters. Same pipeline, same file size regardless of the source. Your best bet is to find network (internet) connection faster than the 256 you are currently using and to upgrade over the air (directly on the phone).

Virtual Cube with DTP for direct access

Hello experts, I would like to hear about some tips to improve performance on reporting over this kind of infoprovider. If there were no performance impact in reporting then this cubes would be perfect to face the requirement we are facing. So I would like to get some help on deciding if we can go ahead with this idea or not.
The volume of information is not going to be small in underlying cube staged in APO source system but we can take care on reports using restrictions and small horizons of information. There is no processing in BW side, we would just transfer records from source system to report.
What else besides restrictions in reports can we do to reduce query performance impact? Any work in underlying cube like partitioning, compression or so?.
Any advice from your experience?.
Thanks so much.

Hi Martin,
There are 2 BCS documents that might give you some starting point on Virtual cubes, if you have a S-userID for service.sap.com/support, these generally discuss the use of Multiproviders, helped by VirtualProviders so you'll have to skip through some redundnat content.
How tou2026 use Deltacache and Deltapair in SEM-BCS (
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000063832008E)
How to... configure the Delta Load based MultiProvider Scenario
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000063842008E
or
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006323702006E
How to... Set up a SEM-BCS Data Mart in BW;
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006323962006E
A generic Virtual provider link that I had lying around;
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700004124212004E

How to add a ipv6 prefix boundary in sccm for Direct Access

Does anyone know how to add a ipv6 prefix for a sccm 2012 boundary? For one, I'm not sure which prefix I should add. I tried adding a couple prefix ipv6 addresses I seen on the DirectAccess gpo that is autocreated but sccm says invalid. For
some reason SCCM adds a bunch of zeros after what I put.
Any help is appreciated.
Thanks

I opened the sccm console and looked for my test computer. I right clicked the device and did properties. It then showed all the ipv6 prefixes for under discovery data. Did all the work for me. Added those and now my software will
download and install from software center.

Any log for process chain changes

Dear All,
I have around 95 process chains, during the monthends & beginings i have done some changes to some of the process chains.
If i want to have a quick look at only changes to those pc's where can i get the info.
To be frank, practically its not possible to go each and every pc and goolge them.
Can you please guide me on how to .
Rgds

Go to SE11 and search with
RSPC*
You will find all the tables concerned with process chains.
RSPC_ALERT_CAT                 Alert Categories for Process Types
RSPC_BUFFER                    Shared Buffer for Processes (Esp. C
RSPC_MONITOR                   Monitor individual process chains
RSPCABAPASYNC                  Logging for ABAP Processes(Synchron
RSPCCATEGORY                   Process Type Categories
RSPCCATEGORYT                  Texts for Category
RSPCCHAIN                      Process chain
RSPCCHAINATTR                  Attributes for a Process Chain
RSPCCHAINEVENTS                Multiple Events with Process Chains
RSPCCHAINT                     Texts for Chain
RSPCCOMMANDLOG                 System Command Execution Logs (Proc
RSPCCONTENTSTART               Process Chains To Be Scheduled Auto
RSPCENQUEUE                    Dummy Table for Runtime Locks of a
RSPCEXOR                       Excluding Or: Log Table
RSPCINFO                       Special Values for Communication be
RSPCINFOT                      Special Values for Communication be
RSPCINSTANCE                   Generic Instance Storage
RSPCINSTANCET                  Texts for Generic Instance-Storage
RSPCINTERRUPT                  Variants for the Trigger Processes
RSPCINTERRUPTLOG               Table for Interrupt Processes
RSPCINTERRUPTT                 Texts for Interrupt Variants
RSPCLOGCHAIN                   Cross-Table Log ID / Chain ID
RSPCLOGCROSS                   Cross-Table Log ID Old / Log ID New
RSPCLOGS                       Application Logs for the Process Ch
RSPCPROCESSLOG                 Logs for the Chain Runs
RSPCRUNVARIABLES               Variables for Process Chains for Ru
The information you are looking for is available in RSPCCHAIN i belive.
Regards,
rocks

Anyone have any suggestions for additions or changes to the FAQ list?

Does anyone have anything that they'd like to see added or changed in this forum's FAQ list?

Todd_Kopriva wrote:
Does anyone have anything that they'd like to see added or changed in this forum's FAQ list?
This may be worth a pointer:
In some circumstances, like in my case where I had AE installed and due to a problem with Itunes I was advised to uninstall and re-install quicktime. After doing so, when starting AE it reports that it cannot find a compatible version of quicktime and will have to turn off quicktime functions.
I found out it is caused by the file `QTCF.dll', not being in AEs' support files. The cure is to find that file in quicktimes installed folder and move it to AE support files.
Full details and paths etc can be found in this explanatory
thread
on creativecow
PS - That thead references CS3 but I had the problem on CS4 and the same cure worked for me.

Any programs for directing a proxy to applications installed on Mac?

So I've used MacProxy on Mac OSX 10.7.5 this does not work, it simply crashes my computer whenever I launch an appliation.
I wanted to find an application, or a setting that will allow me to set authentication for certain applications, or all applications.
Since the application I need this for runs an updater which checks for updates, then launches a client. (Vendetta Online)
I am on my Universtiy wireless, which uses 802.1X via PEAP (MSCHAPv2).
Thanks in advance.

If the Intel Mini came with Leopard it will not run Tiger. Macs don't run systems earlier than the versions with which they were released. Even if you clone onto the Mini's internal drive your Tiger was designed for a different computer architecture (PPC) that was pre-Intel and won't work.
Leopard does not have Classic so your OS9 programs will not run (I don't think they can run on an Intel machine in any case). There is a program called Sheepshaver that was supposed to provide some Classic capability (but only 9.0.4 or earlier) on Leopard but is not user friendly (I'm just reporting what I have read). More information [here|http://forums.macosxhints.com/showthread.php?s=&threadid=53434].
I wouldn't use an old version of Diskwarrior on Leopard. Check Alsoft's site about upgrades.
Message was edited by: Limnos

Direct Access is working but how do I configure it for remote services, client management software, etc..

Good morning/afternoon/evening TechNet,
I've finally gotten a DA client connected to the corporate network utilizing an external network. I'm having a couple issues, one, not being able to ping the server from a computer that's on the same domain(I'm able to ping the DA client from the DA server).
I'm not sure if there is a firewall setting that needs to be open on the client for incoming echo requests? Second, we use a client management system called BMC and I would like the direct access server to be able to utilize the BMC server so that I can manage
the DA client whenever its on the network. I noticed on the DA server that "Step 3" offers an area where it allows you to add servers that will be used for direct access client management. Would I just need to populate the server in here and then
open appropriate firewall rules so that the DA server has access to them? Lastly, Trying to "mstsc" into the DA client what would I need to open up on both sides so that I'm able to do this?
Sorry about the horrible grammar but I've been up 24+ hours getting this awesome but pain in the butt Direct Access feature working.
Thank you as always!
-Liqsh0t

I'm afraid it's a bit more complicated than adding a server into the list in Step 3 :)
When a DirectAccess client is connecting into a corporate network that is IPv4 (I assume yours is, most are), it can reach into your IPv4 servers because the DA server is doing NAT64/DNS64 translations, turning all of your DirectAccess IPv6 packets into
IPv4 packets before they head inside the network. But even though this happens in the background without you really knowing about it, the key thing there is that all DirectAccess traffic is IPv6. This means the clients can only be contacted via IPv6. If you
have IPv6 inside your network, then you can route outbound fairly easily to your DA client computers. If you are all IPv4 inside as most companies are, then you have to either roll IPv6 out inside your network, at least partially, or you have to utilize ISATAP
inside your network in order to create a sort of "virtual IPv6 cloud" that runs on top of your IPv4 internal network. This enables your internal management systems (like the BMC servers and helpdesk computers for RDP access outbound) to have a connection
into the IPv6 world, which then enables them some routing capability to get out to the IPv6-connected DA clients. In addition to this IPv6 or ISATAP setup, you also need to configure WFAS rules on the DA clients so that they will allow this traffic.
There is some info on setting up ISATAP here: http://blogs.technet.com/b/jasonjones/archive/2013/04/19/limiting-isatap-services-to-directaccess-manage-out-clients.aspx
Otherwise one of the chapters in this book is also dedicated to the setup of a selective ISATAP environment, to be used for the purposes of DirectAccess outward management: https://www.packtpub.com/virtualization-and-cloud/microsoft-directaccess-best-practices-and-troubleshooting

Windows Server 2012 - Direct Access clients and the Windows 8 firewall

Hi,
We're running a simple proof-of-concept for Server 2012 Direct Access, we have a single DA server behind a firewall using NAT. We have a number of client devices setup for DA and running Windows 8.
Our issue is that we can only get the Windows 8 direct access clients to connect (when outside the corporate network) and work with the windows firewall disabled (public network profile).
With the windows firewall disabled everything works exactly as expected. When outside the corporate network the client detects the network state (public network profile), connects via DA and all internal resources can be accessed successfully...fantastic.
Is there some specific guidance on manually configuring the windows 8 firewall for Direct Access ? We've tried the obvious TCP:443 with edge traversal enabled but without success.
Much of the information we have found relates to UAG rather than Windows 2012 DA.
Any assistance is appreciated.

Hi,
There isn’t any specific configuration on the firewall.
Just confirm that port 443 can be forwarded to DirectAccess server.
Of course, make sure you are using IPsec first.
Check the links:
STEP 6: Test DirectAccess Client Connectivity from Behind a NAT Device
http://technet.microsoft.com/en-us/library/hh831524.aspx#TeredoCLIENT1
DirectAccess for Windows Server 2012 Installation & Configuration Guide
http://syscomlab.blog.com/2012/09/directaccess-for-windows-server-2012-guide/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

API for setting Access points with PEAP programmatically

Dear Godly developers,
Would like to find out if there is any APIs for setting Access points with PEAP programmatically?
Regards
hAoZ

Thanks for your response. We don't have the Wireless LAN Controller installed and have only configured directly through the AP's, which don't seem to have any configuration changes regarding Aironet IE's. Is there a config change that needs to be made just on the AP's? Or is the Wireless LAN Controller software necessary to make this change?
Thanks again.

RHCDOC_DISPLAY - any cluster for directly accessing changes?

Similar Messages

Maybe you are looking for