RHOMBA 256MB: LASTTRACK SUBFOL
My Rhomba 256 refuses to play certain MP3s. It always shows "LASTTRACK SUBFOLDER" on top of the display along with a permanently visible question mark in the title icon. What's wrong with these MP3s? I can't find the difference to others, that work.
Thanx for help!
Guys,
This is really annoying. I bought this player for my wife. She was happy using it for about a month or two, and then it stopped working completley. We followed the reset procedure, and loaded the latest firmware. This required us to format the device and lose all the music on it. Uploaded a new collection and were happy for two more days, now it is dead again.Will we need to go through this every couple of days?
HELP!!!!
iroth
Similar Messages
-
CREATIVE Rhomba 256MB - mistake in firmware, player does'n worki
My player writes,
WAIT...
PLAYER HAS A IMPROVER MODE, PLEASE WAIT FOR A MOMENT...
FILE SYSTEM RECOVERED.
Is any possibility how to make my player work?
ThanksHas the player actually stopped working? From the error message it looks as if it came aross a problem but sorted it out.
If it doesn't work then you could try reloading the firmware. Get it from here, including full instructions.
PB -
Got my Zen XTRA 30GB replacement today - a Rhomba 256
Yihaa!
That is just wonderful. After having waited two weeks for my SECOND replacement Zen XTRA I recieve the worst player Creative has ever shipped - a Rhomba 256MB... I am so happy!
Is there no way of getting compensated for stuff like this? Cat?I have been on the phone with a guy on the Swedish support team - they are sending out a new 30GB XTRA for NEXT week. I will have to wait another week! Arrgh! This is not standable - how can a company do this?
Is there anyway of being compensated, do you think? I mean ? months of the total ownership time, I have actually not had my player! -
Is the serial number the same..
Is the serial number the same on all creative Rhomba 256MB mp3 players? Or is this individual for all Rhomba players?:smileyindifferent:
Martemarte,
The serial number is different for all of the Rhomba players. It should be found on the back of the player on a sticker.
Jeremy -
Only 85MB left after update (Rhomba 2
Well, I updated my Rhomba 256 with the new firmware and had no problems.
The i wanted to put some music on it and suddenly it said "full, insert new..."?!
Now I?m having only 85MB left!
Argh... Help please!
ThxSeems 2 work. I aint my compete 256MB back but at least bout 200 of em. Thx.Message Edited by AmmokK on 05-05-2005 04:03 PM
-
Hi there, Rhomba problem
First hi there,
I got the Rhoma 256MB for christmas 2003. Seven months later it crashed.... Can?t remember why, it was some formation prob thingy. Than the display didn?t work, I searched the whole internet for an answear. So I bought the Archos 28 SP, pretty good player. So now, 6 months later I looked at my Rhomba and wanted it back^^. Now I can start the Rhomba, the display lights up for a few secs(just backlight, no letters) than it'ss out again. When I connect it to PC, there is nothing wrong with, I can create folders and fill them etc., and there is the record folder and the config. dat. So the HardDisc is allright, but why doesn?t it show anything? I called the creative helpline, they said they can't help me! So can u help me?
Thanks,
Tongu3!You may have your operating system on the Rhomba corrupted. First try formating your player through your computer then follew these steps:
It is recommended that you download and install the latest firmware first if possible. The latest firmware update added a recovery option for your player. After you have successfully installed the new firmware (V. .07.), do the following to enter Recovery Mode:
[*]Turn off your player [*]Slide the Hold switch in the direction indicated by an arrow. [*]Press and hold both the Volume "+" and "-" buttons. [*]While holding the buttons, press and hold the Play/Pause button for 3 seconds. Recovery mode appears. Use the scroll wheat to select a format option (Full Format vs Quick Format). [*]Slide the Hold switch to the right after the player is formatted.
If your player has firmware version .05, try the following procedure:
[*]Make sure the unit is fully charged. [*]Power down the player and disconnect it from the PC. [*]Use your thumb to evenly press and hold both the Volume Plus (+)and Minus (-)buttons simultaneously, and then briefly tap the PLAY button. [*]The Format Mode appears on the LCD screen, use the Menu Scroller to highlight "Full Format" [*]Press and hold (for 2 seconds) the REC button to select Full Format. [*]The LCD now displays: Formatting Wait for Check [*]After around 0 seconds the LCD instructs you to push the HOLD slider to the ON position. [*]Push HOLD slider to ON</LI> -
Pc133 256mb memory modules on ms-6119
I have tried upgrading my memory by removing my existing ram (2x 64mb pc100) and replacing it with one module of pc133 256mb memory. No luck!
Flashed my BIOS with the latest version (Ver 2.10)
Still no luck!!!
Can anyone give me an idea of whats going on.
Thanx
MikeThanx Wonkanoby and Assaf (Whats up homeboy??)
Will try as suggested.
Funny, trawled the archives for an answer and didn't find find the result you suggested.
Still can't replicate it either. Hate it when it's there but just can't find it!!
Will post results as soon as I can change this RAM module. -
Satellite X200-21F: Nvidia geforce 8600m GT shows only 256MB
High everyone, thanks for reading this thread.
I bought an Sat x200-21F.
So the problem is that the dedicated memory on my geforce 8600m GT is supposed to be 512MB, but it only shows 256MB.
I activated the sli mode, but it still only shows 256MB of dedicated graphic ram.
The funny thing is, it does not even seem to have better performances in games!
If anyone can help me to enable the 512mo of dedicated memory?
That would be nice thanks.the problem is: you would NEVER get the power of the two GPU's, because the Pc identify's the two graphic-cards, but you could only use one, at least for games, because to use these two cards effectively, you must have also an Nvdia- cipset (board)---but the toshiba laptops have got one from Intel: http://www.toshibadirect.com/td/b2c/cmod.to?coid=-33936 (look into the detailed specs! )
but thats at least this what i'm thinking, shared by many other people with this problem.
However, you could get a bit power back, if you change the nvidia settings...search for that in the internet, i swear you find helpsites... also, you must try to get always the newest nvidia drivers (also forceware drivers-which is the same *idontknow*) and disable/deactivate unused programms beore gaming... but although this is very bad, ALL my games are running well!
--> use newest drivers (not on the toshiba website, they are old ... go again to laptopvideo2go.com), change nvidia control pannel settings (help on internet) and: DEACTIVATE VISTA AERO-PROGRAMMS! They really munch your working memory... ( search also for programms like "ATITool" or "RivaTuner" to try to overclockingyou GPU...but be careful! (i dont use it, its to difficult for me))
Much luck for your next gaming-experience^^ -
Graphics card memory NVIDIA GeForce 8600M GT with 512MB vs. 256MB
how much difference will i see between the NVIDIA GeForce 8600M GT with 512MB of GDDR3 memory, and the NVIDIA GeForce 8600M GT with 256MB of GDDR3 memory??
i will be doing HD editing on FCP.
any input is appreciated!!
ethanks..i went ahead with the higher RAM:
Refurbished MacBook Pro 2.5GHz Intel Core 2 Duo
15.4-inch glossy widescreen display
2GB memory
250GB hard drive
8x SuperDrive (DVD±R DL/DVD±RW/CD-RW)
NVIDIA GeForce 8600M GT with 512MB of GDDR3 memory
got a good deal on it today.
we'll seeeeeee......
e -
NVIDIA GeForce 8600M GT with 512MB vs. 256MB - MEMORY QUESTION
how much difference will i see between the NVIDIA GeForce 8600M GT with 512MB of GDDR3 memory, and the NVIDIA GeForce 8600M GT with 256MB of GDDR3 memory??
i will be doing HD editing on FCP.All FX Plug class effects in FCP will benefit with that beefier card. Also Motion and Color will benefit. You'll see a smother preview in Motion, and faster renders in Color. In FCP, you'll see more RT playback of unrendered effects if they are the FX class effects as well. Go with the beefier card. It will only serve you down the line too. The movement in software architecture is to offload CPU cycles to GPU cycles, and will continue to go that way as far as I can see, so the beefier card will pay for itself down the line too. Do it now, and it will cost less as well.
Jerry -
Running iTunes7 on a 800Mhz iMac G4 (256mb Ram)
Hi,
i have an iMac G4 Flat panel (800Mhz-256mb Ram) and after hearing some people complaining on these boards of not being able to run iTunes7 properly on macs with a similar spec as mine i have decided for the time being not to upgrade from iTunes6.
Is there anyone on here who is running iTunes7 successfully with less than a 1Ghz. What limitations can i expect from iTunes7 on my iMac.
ThanksI'm sure you will benefit by adding more RAM.
It will decrease disk access, which slows down the system.
About Cover Flow:
The first time I used it, it behaved rather slow and jerky.
Of course iTunes had to get all the artwork from the song files, which meant a lot of disk activity.
iTunes then stores the albumart in .itc files in ./Users/Username/Music/iTunes/album artwork/Local.
I guess this is done for faster access of the pictures.
The next time, I slowly flipped through Cover Flow to enable iTunes to pick up all artwork.
This morning, when I ran iTunes, and browsed through Cover Flow, it behaved somehow jerky (a lot of disk access), but after that it worked rather smooth.
I could only hear occasional disk access, so iTunes must have stored most pictures in RAM.
One more thing. I recently replaced the HD by a larger and faster one (200 GB Maxtor) which also speeds things up (reading/writing at least twice as fast than the 'old' drive). That also helps a bit.
Long story short:
Add more RAM. I'm sure you will not be disappointed by that investment.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.7) iTunes 7.0 -
SAPPHIRE RADEON HD2600XT 256MB AGP RETAIL on PM8PM-V
Hello to all happy new year Can i install SAPPHIRE RADEON HD2600XT 256MB AGP RETAIL to my system without having problems. Can ayonyone tested this? My System Specs are:
CASE: INNOVATOR MIDI TOWER 450W
CPU: Intel Pentium 4 Prescott m2 630-3,0GHZ-LGA 775-800
MOBO: MSI PM8PM-V
2 MEMORY MODULES KINGSTON PC5300 667 1GB
VGA: MSI GEFORCE 7600GS.hi dskoumis
Happy New Year...
it should be just fine
if your mobo have a AGP slot -
Hello all,
Recently I bought a 256mb PC100 stick to install on my MS6191 but the bugger doesn't want to boot with it.
According to the manual the board can take 256mb per bank upto 512mb max on 2 banks.The new stick is tested and found ok in another system.
At the moment I am running in dimm1: 128mb and in dimm2 64mb of ram.
the specs of these are..
Winbond PDP100-064162EU 128 MB PC100 SDRAM (CL 3.0 @ 100 MHz) (CL 2.0 @ 100 MHz)
Micron Tech. 8LSDT864AG-10EC7 64 MB PC100 SDRAM (CL 3.0 @ 125 MHz) (CL 2.0 @ 100 MHz)
Motherboard:
Motherboard ID 62-1601-000000-00101111-071595- IRONGATE$1AMD75X0A6191MS V1.6
BIOS:
System BIOS Date 06/08/00
DMI BIOS Version A6191MS V1.6
BIOS Type AMI (06/08/00)
CPU Type AMD Athlon-PECM, 1000 MHz (10 x 100) Slot A
Motherboard Name MSI MS-6191 (1 ISA, 6 PCI, 1 AGP, 2 DIMM)
Motherboard Chipset AMD-750 Irongate
System Memory 192 MB (SDRAM)
System interface 200mhz EV6
Chipset Properties:
Motherboard Chipset AMD-750 Irongate
CAS Latency (CL) 2T
RAS To CAS Delay (tRCD)2T
RAS Precharge (tRP)2T
RAS Active Time (tRAS) 5T
Would appreciate any help in the right direction, Thanks!the 256 dimm would need to have 2x as many ram chips on it as your 128 has
most problems with new ram is they are much denser,have a few chips for a big dimm
than the ram was around when your board was made
Clear CMOS Guide
and try it alone as well -
Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?
3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O. -
Will my Airbook (11" late 2010) w/ NVIDIA GeFORCE 320M 256MB using the Mini Display Port to Dual-Link DVI Adapter support the Dell 3007WFHC (30") monitor at full resolution (2560X1600).
Works fine at 1280X800 (with out without MDP DL DVI Adapter) - cannot get any higher resolutionHi ddickson01,
The MacBook Air 11 inch late-2010 model does support 2560 x 1600 resolution on an external display. See this specifications article for reference -
MacBook Air (11-inch, Late 2010) - Technical Specifications
Thanks for using Apple Support Communities.
Sincerely,
Brett L
Maybe you are looking for
-
HT202213 how do i get itunes from m y computer to my iphone 5?
I have a new iphone 5 and have songs on my desktop that were loaded and used in an i touch. How can I get the music from the desktop to the iphone?
-
Connecting to a Polycomm 8000 unit with a Macbook
Hi there, We recently purchased a Polycomm video conferencing system for our office and my supervisor is a strictly Mac user outside of the office. I've been looking for options that would allow him to log into the video conferencing unit from the ro
-
Hello Friends Hope you are doing well I have issue wuth illusrtator CS6. we start using Cs6 now before am using Cs2 When am saving svg file in cs2 and and open svg file in cs2 then am able see the crop marks but in illusttrator not can you please he
-
Create a Connection on TREX for 2 systems with same SID
Hello world, Here is my case, We have a PRO systems With SID=PRO On Host= production , and a Sandbox system with also SID=PRO On Host=SANDBOX now i need to create a connection in TREX in parallel so when i add the 2nd one it just edits the 1st one th
-
Why doesn't Mail on my iPhone filter out Junk mail?
Can anyone tell me why Mail on my iPhone 4 does not appear to filter out Junk mail? Maybe I'm oversimplifying things but I would have assumed the same features and functionality as in Mail for OS-X i.e. you can mark any mail received as 'Junk' if the