Rhythmbox breaks auto mounting.

For a few days I have struggeled with making gnome-volume-manager automount removable storage devices. Some times it woked and sometimes it did not. I had enabled hal and dbus I was sure gnome-volume-manager was running. Eventualy I even loggeg into Gnome as root and everything workes perfectly, so my system is configured correctly. So maybe it was a permission issue, was what first come to my mind, but eventualy it turned out to be Rhythmbox(Rb) who was the trubblemaker. Rb does not autostart as root, as it does on my regular user account, thats way it worked as root.
Now, after some more testing, the situation is this: Automounting works perfektly until i start rhythmbox, then it just stop woking. Even if i stops Rhythmbox, automounting still is broken, even a "pkill gnome-volume-manager && gnome-volume-manager" does not fix it, but logging out and inn again does fix it! No other programs breaks auto mounting!!
I have tried to recompile Rb without both the --with-ipod and --with-dbus flags, but it did not help? Otherwise I have a standard Arch-install.

This is my rc.conf, so if you don't see anything wrong with it I can file a bug!
# /etc/rc.conf - Main Configuration for Arch Linux
# Localization
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
HARDWARECLOCK="UTC"
TIMEZONE=Europe/Oslo
KEYMAP=no-latin1
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# Networking
HOSTNAME="arch"
# Module to load at boot-up (in this order)
# (prefix a module with a ! to disable it)
MODULES=(usblp fuse snd-bt-sco)
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
ra0="dhcp"
INTERFACES=(lo ra0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hotplug sshd network netfs crond dbus portmap fam hal alsa cups uptimed sensors hcid)
# End of file

Similar Messages

Disable Auto-Mounting

Hi Everyone,
I have been searching forum after forum trying to find an answer to my question but am not having any luck. I have found one option but there has to be a better way. As I am taking a Computer Forensics major I need to disable auto-mounting of USB drives so I can manually mount the device with read-only options so I do not destroy evidence on drive I need to investigate.
About 3 versions ago in Ubuntu I was able to just uncheck a box in the system settings so it would not auto-mount. Then they decided to get rid of that option because it was not compatible with changes they made to other parts of the system. So to get around the auto-mounting I found that I could shutdown hal, plug the drive in, issue my mount command, then finally restart hal so network manager and other services that needed it could run right. This seems kind of pointless to have to shut down hal and break things just so I can mount a drive. Since I recently left Ubuntu behind and converted to Arch I thought I would see if you guys had any ideas.
I know I can add options to fstab but since I will get a different drive for every investigation this doesn't seem to be an option either.
Any help you guys could offer would be highly appreciated.
Thanks,
Timn
Last edited by Timn (2009-11-17 01:18:33)

It is probably your window manager that does the auto-mounting, not arch. If it's gnome, there is a key in the gconf "/apps/nautilus/preferences/media_autorun" which you would need to disable. I do use FluxBox as a WM which does not do any mounting. These are the only window managers for which I can provide specific inforamtion. But no matte what you use, KDE, XFCE or something else, there should be a configuration that allows you to disable it.
If that didn't help, please provide more specific information about your setup.

Auto mounting stoped working after last round of updates

I run kde and I use testing, since the last time I used my usb stick auto mounting doesn't work. I get
mount: can't find /dev/sdb1 in /etc/fstab or /etc/mtab
I tried a DVD doesn't work anymore either
I searched the forum didn't find anything. Any suggestions.

Yes, the new kernel breaks HAL, it'll be fixed
skottish wrote:It happened to quite few people including me. It's already mentioned in a few other threads so I'll bet the devs know. I just reverted for now.
How do you revert back?

Auto-Mounting Network Shares/Disk Images

Hi,
I'd like to share how I solved my problem with auto-mounting a network disk image/folder share to be used as a custom library/location for Aperture 3.xx. I can now either reference the master photos from the network or have it copy to this disk image volume on the network, although it might be better to have it copy to the disk image volume, so one can move it around as a file later. I researched hard over these forums and internet resources and discovered what I thought was the best way to accomplish this. Initially, I found right away that Aperture doesn't allow you to create a library over your network drive or a home server such as mine, unless it is partitioned/formatted to Mac OS. This wasn't acceptable for me as I also run Windows 7 PCs that need to utilize the network folder shares, as well.
I don't understand why I don't have this problem using iPhoto 2011, and do with Aperture 3.0, which is a far more expensive application. Anyhow, I read a little about NFS, but didn't know how to implement this or if it required the Mac Server and/or a non-built in application, it probably isn't compatible with windows. So, I found that by creating a .DMG disk image file, as a partitioned/formatted Mac OS file in Disk Utility, and saving it to the network folder of my choosing, did the trick.
Steps I used to accomplish this:
-Go to Disk Utility and create "New Image"
-Select format w/ MacOSX Extended(journaled) and choose "single partition/GUID" type (or whatever you want)
-Enter a custom size of your disk image (ex in 1GB or 1TB). Click "Create"
* I created this locally 1st and then I copied it over the network, to the network folder/subfolder on my HP Mediasmart Home Server EX495. I found that creating it over the network took too long and would crash Disk Utility.
-After it's copied to your desired location over the network folder, open Automator.
-choose "Application" workflow, double-click to add "Get Specified servers". Enter location of your server (ex smb://hpserver/)
-Then add "Connect to Servers",
-Then add "Get specified Finder Items". Click Add, and locate your disk image file over the network. (this will automatically add the location path. For ex. smb:/hpserver/photos/aperture_library.dmg)
-Then add "Mount Disk Image".
-Then test workflow by clicking on "Run" button on top right of window. If your
Finder->Preferences->General settings on your Mac is set to show "Connected Servers" on your desktop, your disk image will appear on you desktop.
-Finally, save this Application workflow as an application by clicking File menu->Save As. Save this to your documents folder area.
-To have your Mac auto-mount your disk image automatically when you login:
->go to System Preferences->Accounts->your "Admin account name"->Login Items
->click "+" sign and navigate to the Documents folder, to where the Automator application you saved
->click Add. Once done, it will appear on the Login Items area. You can choose to hide it, if you want by clicking the checkbox.
-Now Restart your Mac, and now your disk image should auto-mount.
Hope this helps, as it helped me solve the issue. Too bad one must have to program this and it is not native on MacOSX.

Too many steps. Do this:
1. Go to Disk Utility and create a disk image with the following properties:
Format: Mac OS Extended (Journaled)
Partitions: Hard Disk
Image Format: Sparse bundle disk image
2. Copy the image you just created to the share on the network where it should reside.
3. Open System Preferences, and click on the Accounts icon
4. Select *your account* and click on the Login Items tab
5. Drag the icon for the disk image from the network share into the Login Items list
If a login item is something on a network share, it will reconnect to the share it's located on automatically first.
If a login item is a disk image, the disk image will be opened and mounted.
It's important that the image is a journaled one because if it isn't, being disconnected from it while writing would be potentially disastrous.
It's important that the image is a sparsebundle for two reasons: sparsebundles only take up as much space as they need (e.g., a 1Tb sparsebundle with 100M of data takes up about 100M of space), and they also break the disk down into smaller files. If the underlying filesystem on your network share is FAT32, then no file can go over 4Gb. If you use a sparsebundle, of course, there's no practical limit to how large the disk image can get. Also, it can speed up certain types of backup procedures.
I suggest using partition type "Hard Disk" instead of "1 partition GUID" because, as a disk image, there's no sense in having a partition table or making it bootable (because you can't boot from the image).

How to turn off auto mounting of server on boot?

I've got an old MacPro that is running Mavericks but is having an issue where the finder constantly crashes and restarts. I think it may have to do with a an old server (an external Mac mini) that would mount when the MacPro booted up because I now get an error message telling me that the Mac Pro can no longer find that server (which makes sense as it is no longer there). If I leave the error window open and don't click 'ok', the Finder remains intact and the crash loop does not begin. If I click 'ok' in the server connection error window, the problems begin.
…So, where do I "turn off" this auto mounting of the old mac mini on boot? I've looked in my Login items in the system prefs and no such task is there, and I can no longer recall how i even set up this automount function.
Thanks for any help you can offer.
Mark

Repair Disk.
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair.Macintosh HD.
Click First Aid.
Click Repair Disk.
If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
Click Restart.

How Do I find out what app is auto-mounting a network share and stop it?

I have a new laptop, the 13" rMBP. I installed Steam and wanted to use the network share on my server to store the game files. Everything went OK. I closed Steam, disconnected the share and shutdown my laptop. When I opened my laptop later on at work, it started to try and mount the network share.It keeps on going it. I removed the Steam app and all files related to Steam that I could find. I've looked at fstab, auto_home, auto_master and a large list of other files and directories and I *still* cannot find the offending file that's auto-mounting the share. It's really frustrating.
The share auto-mounts when I am home but not on the desktop or in finder. I find it by looking at /Volumes/ in terminal. If I mount the share manually under /Volumes/ it shows as Games-1 and mounts on the desktop under Games.
Does anyone have any ideas on where I should be looking to find the offending process/file/daemon?
Thank you!
Trevor

thanks for the reply but are you sure about this? What difference would it make? Why 5 apps?
Even if it does work, which I doubt, at some point, I will have to resync ALL my apps again and surely the same thing will happen again, and I will be none the wiser. I still won't know which app it is. There must be a way of finding this out.
Any ideas?
What is really freaking me out is how it is connecting to my carrier (who is charging me) with Cellular data switched off.......?
Thanks again.

Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

Hello.
I have a problem with OEL 6.5 and ocfs2.
When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
fstab:
UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
#UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
#UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

What is the output of:
# chkconfig --list o2cb
# chkconfig --list ocfs2
# cat /etc/ocfs2/cluster.conf

External Hard Drive connected to AEBS does not auto mount

Just upgraded from Tiger 10.4.11 to Leopard 10.5.5. I have a AEBS running 5.3.2 airport utility with a LaCie HD connected to it.
In Tiger, my external hard drive would auto mount onto the desktop every time the computer turned on or woke up from sleeping etc.
In Leopard, my external drive will not auto mount. It does not show up in the sidebar under devices. It does not show up in the disk utility. To access it, I have to go the the finder sidebar, select my AEBS under shared, then select my HD. Also, I did check show connected servers and external disk on the desktop in the finder preferences. Also, not sure if this matters but the icon on my external drive on my desktop is the blue drive with three people holding hands and not the brighter blue one with the wireless signal logo.
In tiger my external HD basically acted like any other folder that was always there and not like a networked drive that I had to go and connect to. I want to go back to that. I heard this has to do with leopord no longer having the airdisk utility??
thanks

Try making an alias of one of the top-level folders in your external (AEBS-connected) drive, drag it to the desktop, and then put it in your Login Items.
--> System Preferences/Accounts/Login Items
You can simply drag the folder alias into the Login Items window.
When you next log in, the folder will be automatically opened. Alas, it doesn't give you instant access to the entire external drive, but you can back out a level to see the entire drive. It isn't quite what you had with Tiger, but perhaps it will suffice.
If you leave the aliased folder on your desktop, you have a skinny approximation to the mounted volume that you had with Tiger.

External hard drive and SD card won't auto mount

I am using MBP with retina on Yosemite. MacBook Pro (Retina, 15-inch, Late 2013).
On Maverick, all my external drives used to auto mount. The same was true just after Yosemite was installed. Lately, only my Time Machine hard drive auto mounts and others don't, e.g. my backup drive that I use with Super Duper! and my camera SD card. I have to go to disk utility and mount them manually. I did not see any option for auto mount in disk utility.
Could you please guide me on how to get auto mount back?
Thanks in advance

I have been dealing with this same issue for the past several months. Running a Macbook Pro (Mid 2010) with OS X Yosemite 10.10.1. This problem occurs when I plug in Firewire, USB, or SD card. The external hardware appear to be working fine, it has to be either a setting, or a quirk that needs corrected with Yosemite. I have run all OS systems since Snow Leopard. Never had this problem. Anyone have any ideas?

How do I stop a CCC partition auto mounting in Lion

I have an external USB drive with 2 partitions. The first partition has a CCC Clone of my drive before Lion. The second is used for Time Machine. This drive auto mounts on boot which is fine but the CCC partition causes problems with the App Store as it sees Apps that I installed in the Clone backup as installed on Lion. The easy way for me to fix this is just to eject the CCC partition but I have to do this every time I boot. Is there a way of just stopping this drive from auto mounting on boot and manually mounting if need be. Any help would be appreciated. Many Thanks in advance.

I just upgraded to the latest version of Lion--I don't know why it didn't change the info. under my Apple icon. And I know I can uncheck the box while signing off, but you have to do it each time--I'm looking for a way to uncheck it and recheck whenever I want, the way the dock options are supposed to work (although it doesn't for me anymore with Lion).
Checked the Users and Groups--the only login items listed are basically 4 apps that I had back when I had my PC and I no longer have them--I may have had Growl for awhile but I deleted it. There are yellow triangles by them. No other apps listed there.
I guess I'll have to uncheck the box each time I sign off. Tedious, but that's the way it is. Wish I had Snow Leopard back!
Thanks for your suggestions though--just wish they worked.

Auto Mount in SAP LVM 2.0

Hi All,
We have installed SAP LVM 2.0 SP3 in our landscape and we are working on manage system configuration to utilize cloning futer in SAP LVM.
During the configuration, we are not able to select auto mounter option in Instance configuration.
I request you to kindly suggest me on this.
Thansk and Regards,
Prasad

Hello Dieter,
Thank you, I have created a support ticket with SAP.
Thanks and Regards,
Prasad

[solved] USB drives won't auto mount

When I plug in a drive, I get this error message:
Rejected send message, 1 matched rules; type="method_call", sender=":1.24" (uid=1000 pid=4499 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=3069 comm="/usr/sbin/hald)).
2nd harddrive:
Rejected send message, 1 matched rules; type="method_call", sender=":1.20" (uid=1000 pid=3537 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=3058 comm="/usr/sbin/hald)).
There are fixes in other forums, but they are all radically differnet, and the one's I tried aren't working.
I have an eee pc with xfce and slim.
I know this is a perimssion problems since auto mount works fine for root. Could anyone tell me the (probably simple) fix for this? Thanks.
Last edited by Meskarune (2010-04-15 04:21:08)

HAL:
http://wiki.archlinux.org/index.php/HAL#Troubleshooting
Also check your .xinitrc and make sure your lines matches this:
exec ck-launch-session startxfce4
Lastly, you can also use udev to automount your drives:
http://wiki.archlinux.org/index.php/Ude … SB_devices

Disable Gnome auto mount for one specific UUID

I am using Gnome 3 (gnome disk utility,udisks,udev stack i think).
I have a device (Garmin Edge 800) that I am only going to use in Virtualbox so I want to prevent it from automatically mounting in Gnome. However I want other devices to auto mount as normal so disabling auto mount entirely isn't an option.
The device got two UUIDs and previously I could write a HAL fdi policy to ignore devices with those UUIDs, but now that HAL is deprecated I am not able to figure out how to do this.
Last edited by lessthanjake (2011-06-29 09:56:30)

There's probably a udev config file somewhere (udev wiki perhaps) but you can do it with fstab "noauto" that's what I do for partitions I don't want to auto mount.

Working auto-mount?

Hi all,
I have a xfce4 desktop installed. I want an automount service. I tried autoFS, with the following settings:
auto.master
/media /etc/autofs/auto.custom --timeout=15
auto.custom
disc -fstype=auto,ro,nodev,nosuid :/dev/cdrom
Backup -fstype=auto,user,rw,async,umask=000,gid=users,noatime,nodiratime :/dev/disk/by-uuid/f569bba5-8007-40f5-8b3c-36960c5796d5
## Backup -fstype=ext4,user,rw,async,umask=000,gid=users,noatime,nodiratime :/dev/disk/by-uuid/f569bba5-8007-40f5-8b3c-36960c5796d5
Shared -fstype=ntfs-3g,user,rw,async,umask=000,gid=users,noatime,nodiratime :/d ev/disk/by-uuid/565AF3085AF2E421
ReaderCard -fstype=vfat,flush,user,rw,async,umask=000,gid=users,noatime,nodirat
ime :/dev/disk/by-uuid/0102-0304
##ReaderInt -fstype=auto,async,nodev,nosuid,umask=000,gid=users :
## Other medium here
# floppy -fstype=auto,async,nodev,nosuid,umask=000 :/dev/fl
The files are formatted following the instructions. The partition Backup, however, does not come up ("no such file or directory", even when root).
Backup is ext4 and it's kept on an external hard drive, the same of Shared. Mounting it manually works. I have tried with simpler options (as simple as
Backup -fstype=auto :/dev/disk/by-uuid/f569bba5-8007-40f5-8b3c-36960c5796d5
with no results. Autofs won't do.
As an alternative I have tried xfce volume manager, but that doesn't work with ANY external device.
Please help. Thank you.

That would be a solution - if it worked. I tried that too. The Arch wiki just glances on the setup, solving the whole question with a one liner "Thunar-volman's automount doesn't work currently because of the hal to udev switch, Sept 2010"
The section on udev is obscure, mentioning to check policykit to "properly start your session".
However the policykit page is also obscure, containing no mention about starting X session properly or even improperly for what matters.
The default setting produces no result at all.
Nowhere I was able to find a five-lines working example of set up. I have used Linux daily since 2000 (and I know it should not take more than 5 line explanation to setup an auto-mount).
I am really embittered by this interpretation of "the arch way". The documentation on certain core tools such as policykit is completely insufficient and the defaults do not solve basic problems (hours to set up a basic auto-mount? incomplete wiki pages referring each other?).
Arch could be a perfect desktop distribution with just a pinch of attention to put the obvious features, when correctly disabled by default, at easy reach through complete examples. (Shutdown buttons? Same story: one line reference to policykit, dbus and other 10 tools with not the barest explanation about how to use them in synergy for the purpose. Result? Manual shutdown for the moment).
If you could provide a working setup for thunar volume manager I'll be happy to use and add it to the wiki.
Thank you.

USB Auto-mounting Woes [SOLVED]

Hi,
I've been trying to get my USB sticks to auto-mount and grant all users permission to mount/unmount them.
To achieve that I initially added the following to my sudoers using visudo:
%wheel ALL=NOPASSWD: /bin/mount
%wheel ALL=NOPASSWD: /bin/umount
That however didn't solve my inability to (un)mount drives in PCMan FM.. so I headed towards the wiki. The wiki stated the following:
You can easily automount and eject removable devices with the combination of pmount, udisks2 and spacefm. Note you have to run spacefm in daemon mode with spacefm -d & in your startup scripts, ~/.xinitrc or ~/.xsession, to get automounting.
I wasn't too fussed about having to use spacefm and everything seemed to work just fine.. until I tried format a USB stick using gparted. Gparted fails because because seemingly half way through the formatting procedure the drive is mounted (my suspicion is that it's spacefm).
mkdosfs: /dev/sdb1 contains a mounted file system.
If i unmount and format manually using the CLI it works just fine.. but I quite like gparted
I tried removing
spacefm -d
from my .xinitrc and that actually stops openbox from starting up. Uninstalling (and later re-installing when it didn't help) pmount didn't help either, spacefm just auto-mounts in a strange 'run' way..
So now I'm stuck, anyone experienced similar issues with gparted and spacefm?
Last edited by omgitsaheadcrab (2012-06-22 13:27:07)

ck-list-sessions shows an active consokekit session, so that should be fine?
Session1:
unix-user = '1000'
seat = 'Seat1'
session-type = 'x11'
active = TRUE
x11-display = ':0.0'
x11-display-device = '/dev/tty7'
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2012-06-22T12:24:47.734505Z'
login-session-id = '3'
The gparted error log is as follows:
GParted 0.12.1
Libparted 3.1
Delete /dev/sdb1 (fat32, 7.37 GiB) from /dev/sdb 00:00:01 ( SUCCESS )
calibrate /dev/sdb1 00:00:00 ( SUCCESS )
path: /dev/sdb1
start: 2048
end: 15466495
size: 15464448 (7.37 GiB)
delete partition 00:00:01 ( SUCCESS )
========================================
Create Primary Partition #1 (fat32, 7.37 GiB) on /dev/sdb 00:00:01 ( ERROR )
create empty partition 00:00:00 ( SUCCESS )
path: /dev/sdb1
start: 2048
end: 15466495
size: 15464448 (7.37 GiB)
set partition type on /dev/sdb1 00:00:01 ( SUCCESS )
new partition type: fat32
create new fat32 file system 00:00:00 ( ERROR )
mkdosfs -F32 -v -n "PATRIOT" /dev/sdb1
mkdosfs 3.0.12 (29 Oct 2011)
mkdosfs: /dev/sdb1 contains a mounted file system.
========================================
I still can't help but feel it's spacefm doing something funny (automounting when it shouldn't)
Last edited by omgitsaheadcrab (2012-06-22 12:31:36)

Rhythmbox breaks auto mounting.

Similar Messages

Maybe you are looking for