Rhythmbox doesn't want run

Hi,
As AmaroK crash at home, I decided to use an other music player, Rhythmbox.
But, after my pacman -S rhythmbox, the program crash immediatly. I can't run it !
[root@NicoElro nicolas]# rhythmbox
(rhythmbox:4820): GnomeUI-WARNING **: While connecting to session manager:
Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed.
(rhythmbox:4820): Rhythmbox-WARNING **: couldn't connect to session bus: Unable to determine the address of the message bus (try 'man dbus-launch' and 'man dbus-daemon' for help)
(rhythmbox:4820): Rhythmbox-WARNING **: Unable to start mDNS browsing: MDNS service is not running
** (rhythmbox:4820): WARNING **: Could not connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: Aucun fichier ou rxe9pertoire de ce type
** (rhythmbox:4820): WARNING **: hal_initialize failed: Failed to connect to socket /var/run/dbus/system_bus_socket: Aucun fichier ou rxe9pertoire de ce type
** (rhythmbox:4820): WARNING **: hal_initialize failed: Failed to connect to socket /var/run/dbus/system_bus_socket: Aucun fichier ou rxe9pertoire de ce type
Any ideas ?
Thanks !

Okay, I launched dbus

Similar Messages

Rhythmbox doesn't want to download podcasts

When I try to add a feed I get the following error:
Error in podcast
There was a problem adding this podcast: Unable to parse the feed contents. Please verify the URL: http://www.zen54064.zen.co.uk/Hospital% … st%201.xml. Would you like to add the podcast feed anyway?
If I download the feed with wget and then load it locally by pointing to it with "file:///..." it displays correctly - it lists the podcasts.
When I try to download the actual podcasts it fails and the little red circle with the minus (no entry sign? ) appears next to the podcasts.
I am behind a router, so I don't know if I have to open any ports or something.
What is the problem and how do I solve it?

Oh, it doesn't minimize to the traybar for you, either?
I downgraded to 0.12.1-1 and it still doesn't want to download podcasts. It minimizes to the tray, though.
biagio,
want to try downloading that podcast feed and one of the podcasts just to see if it's rhythmbox or my connection, please?
Last edited by snowball (2009-06-18 17:45:59)

Windows not recognizing my time capsle - I just purchased a new computer that runs windows 8 and it doesn't want to recognize the time capsule as an external hard drive (ie doesn't show up under my compter). I've downloaded airport utility...

I just purchased a new computer that runs windows 8 and it doesn't want to recognize the time capsule as an external hard drive (ie doesn't show up under my compter). I've downloaded and run airport utility, but it seems to have a hard time finding the time capsule...maybe one out of 10 times it will find it.
What's more, when I look under network infrastructure under the control panel, it shows my Broadcom ADSL centurylink Router...so I'm wondering if my modem/router combo is overriding the router function on my timecapsule and the time capsule is not being used as a router...
Any help much appreciated!

In this case the TC should be in bridge mode.
Win8 is still problematic. Try using ethernet instead of wireless. I think the drivers are poor still and it is well worth having a try via ethernet if you haven't already.
Otherwise you will need to wait for apple to release bonjour for windows 8 and airport utility.. which is not out yet.
Also make sure the windows is set to home, not work or public.. even turn off the firewall.
Open windows explorer and type the TC ip address into the address bar.. (none of which is perhaps the same.. I gave away windows at vista.. shudder)
\\TCIPadderss.

My Ipod doesn't want to sync with itunes showing error (-48)

My Ipod doesn't want to sync with itunes showing error (-48).. What can I do cause I can't add songs to the ipod....

If you have not already, shut down your computer. Do this to reset your iPod
http://support.apple.com/kb/HT1320
Start up your computer. Run iTunes. Connect iPod. Try to sync again.

Powerbook doesn't want to boot from cd anymore

Hi everyone,
My girlfriend's PowerBook G4 crashed, so I tried to boot from a 10.4 dvd I have. The computer booted once from the DVD, but then I had to shut it down for logistical purposes (understand: I had to move it). Now, it doesn't want to boot from the dvd anymore. When I insert it, the dvd reader just ejects it. I tried pressing on the C key and cd boot from Open Firmware but it didn't work (except for the first boot)...
Anyone can help?

If the 10.4 DVD has a gray color & it's from another model Mac, it won't boot. Some how the Mac may have been "fooled" the first time.
Can you describe the "crash"?
Try inserting the DVD in the disc drive while the Mac is not running. Then startup while depressing the Option key. Does the 10.4 DVD show up as one of the sources to boot from?
Will it boot in Safe Mode? See
What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392
Takes a while to run, but it usually "fixes" problems.
Doesn't your GF have the restore DVDs that came with the PB G4?
 Cheers, Tom

My power mac G5 doesn't want to import my contacts & calender from my iPhone

my recently purchased (but older) power mac G5 doesn't want to import my contacts & calender from my iPhone. it syncs but doesn't bring in my info.
any tips for me?

What version of iTunes is it running?
Allan

Bonjour keeps dying and doesn't want to start back up.

Hey guys,
On a bunch of our machines, after being upgraded to 10.6, bonjour appears to die completely. Sometimes I can get it to work again via CLI, sometimes I can't. All of our printers for our Macs are shared out via bonjour on a 10.5 Server. The majority of the machines are running 10.6.7, some are still on 10.6.6, but the problem has been around since at least 10.6.4, as far as I can remember.
Any ideas why this is happening or how to fix it?
Jason

zaza2009 wrote:
I got gray screen on my imac and peep sound and doesn't want to start up what should I do?
http://support.apple.com/kb/ts2570

Notebook doesn't want to wake up

Hi,My laptop (Notebook HP Pavilion g7t-1100 CTO) have been working fine till today, I enabled Virtual Technology in BIOS and from that time laptop is not waking up after I slept it. When I disable VT it works fine again. I have installed two softwares: Windows 7 and Ubuntu and on both of them it doesn't want to wake up. Do you have any ideas how I can fix it?

1. Verify that you have at least 10-15% free drive space at all times.
2. Open Disk Utilities (Applications/Utilitites) First Aid, select your drive from the left and look at the bottom of the First Aid window and check the drives S.M.A.R.T. status, it should read "Verified".
3. Download, Install and run Applejack:
http://applejack.sourceforge.net/
4. You said you tried resetting the PRAM, but I believe you want to reset the SMC for this particular problem. Did you reset the SMC? I will not hurt to reset them both. You said you took out the battery but there is a little more to it then that.
Once the battery is out you should press and hold the power-button for at least 5-sec.
http://support.apple.com/kb/HT3964
From the link above scroll to the bottom of the page, where you'll see a link named "_Resetting the SMC on Mac portables with a battery you can remove_" select this link and a drop dosn set of instruction will appear, make sure you follow those instructions for your Mac.

HT1222 My Iphone doesn't want to sync with itunes.

My iphone doesn't want to sync with itunes. What is going on here?

If you have not already, shut down your computer. Do this to reset your iPod
http://support.apple.com/kb/HT1320
Start up your computer. Run iTunes. Connect iPod. Try to sync again.

My iMac keeps waking up or it just doesn't want to sleep.

My 2009 iMac wakes up spontaneously or doesn't want to sleep. I have made sure no keys were pressed, no programs running, and the system doesn't wake from network activity. Is there a way to fix it? It all started as soon as I installed Yosemite.
Thanks!

I had a problem similar to this and the problem was my mouse (what kind of mouse is on the Mac?) - it was so sensitive that very minor vibrations (like a door closing or a big truck driving by) would cause it to wake up the computer when I had put it to sleep. I simply power down my mouse after putting my Mac to sleep and the problem went away. Turn on the mouse and move it a bit and the system would wake up when I wanted it to, not randomly any longer...
Another possible issue is waking up from network accesses - this is in the "Energy Saver" System Preferences pane (in the Power Adapter tab) - do you have other computers or devices that might be trying to access the iMac while it was asleep?
Good luck...

My ipad doesn't want to stream in my apple TV, what to do?

It use to work, now i updated my Apple Tv and my ipad and now my IPAD music doesn't want to stream to my apple TV how can it get fixed

Clean the lint/debris from the charging port and plug the cable in.

HP LaserJet 600 M601 doesn't want to use envelope feeder

1. HP LaserJet 600 M601
2. Windows XP 32-bit
3. Tries to print to different trays than envelope feeder when envelope jobs are sent to printer, eventually the envelope feeder shows up on the display and user can choose it to print. Then prints OK.
4. New printer.
5. HP LaserJet 600 M601 doesn't want to use envelope feeder:
Driver is configured with correct trays and printer with paper types.
User send a print job with paper size as Envelope #10 to printer, printer prompts for envelopes to be loaded in different trays, after Tray 2, and after Tray 1 then asks user to use the Envelope Feeder, instead of the just immediately printing to the envelope Feeder.
Tray configuration:
Envelope Feeder: Envelope #10, Envelope
Tray 1: Legal, Plain
Tray 2: Letter, Any Type
Tray 3: Letter, Letterhead
Hp LaserJet 600 M601 M603 PCL 6 driver version 61.114.1.10295
Firmware: 2131305_192069

Just got off the phone with HP on the very same issue using a 602dn printer. What ended up fixing my problem was downloading the HP Universal Print Driver ( www.hp.com/go/upd ). You'll want the PS driver, not the PCL6 one. When you exctract it, update your driver to the v5.4 driver. I don't know why that would have fixed it, but it did. Let me know if it works for you.

Hey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

ey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

At the bottom of the page Settings > Messages you should have a section headed "SMS/MMS" Turn MMS messaging on then you can turn group message on.

How can I want run the reports on AD, if I have no access to AD server?

I am not an AD administrator and I do not have permissions to AD server. But I have admin permissions to a site in AD and using RSAT, can administer the site. How can I want run the reports listed below? AD is on Windows 2008R2 server.
All Administrator logons
Logon statistics
Logons during non-business hours
Multiple logon failures
Password resets (other than Security Administrator)
Successful logon after several failures
User behavior anomalies
Logons of already logged-on users
All Logons Over Weekend
Audit Policy Changed
Computer Accounts Changed

Hello,
Some of your reports can be done using RSAT with Active Directory Powershell module. Some of them including
Computer Accounts Changed needs auditing to be enabled for directory object changes. These are not predefined reports which you can simply run my friend. Can you please be more specific?
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

How can I remove an icon from my desktop that doesn't want to go?

I was unsuccessful in installing a particular program, so I thought I would just "wipe the slate clean" and try again. Unfortunately, the icon on my desktop doesn't want to go. Every time I try to move it into the TRASH, a note on the screen says, "The icon "iScrobbler" cannot be moved to the trash because it is open".
I've turned the computer off and on again, and I've tried the DELETE button, but the icon remains on my desktop. How can I remove it?

There can be many reasons why a file "doesn't want"
something. But you may be able to replace the file if
you can rename it. Follow the steps here:
http://docs.info.apple.com/article.html?artnum=107426
If that doesn't help, you may need to delete it using
root user privileges. That's a very advanced and
risky method so you should consult with someone who
is experienced with that process. I have done it many
times to delete goofed files that have a mind of
their own.
It didn't work, I'm sorry to say, but thanks for the idea. As to the "root user privileges" method, I wouldn't even consider it. My computer "skills" are definitely not at the level for trying anything that could be described in those terms. Still, there is hope. I found the creator of the program and sent him an e-mail message this morning.
Finally, I'd like to thank you again for your extraordinary performance. Talk about "service above and beyond.." well, that certainly describes you. I somehow feel that if you couldn't...no, no, let's not say that, let's just hope that the program's creator will be able to help. Thanks again for what you have done.

Rhythmbox doesn't want run

Similar Messages

Maybe you are looking for