Rhythmbox don't work well

i have install the rhythmbox,just want to listen to the radio,but it didn't work,first of all,it couldn't even play mp3 file,after install the decoder by using the command:
pacman -Sy codecs `pacman -Ss gstreamer | grep -e '^extra/gstreamer0.10' | awk '{print $1}'`
i can play the mp3 file,but still couldn't listen to the radio,the following message came out:
(rhythmbox:3433): Rhythmbox-WARNING **: Unable to initialize mDNS: Daemon not running
(rhythmbox:3433): Rhythmbox-WARNING **: Unable to start mDNS browsing: MDNS service is not running
(rhythmbox:3433): Rhythmbox-WARNING **: Unable to grab media player keys: Could not get owner of name 'org.gnome.SettingsDaemon': no such name
[WARN 3447] polkit-session.c:144olkit_session_set_uid(): session != NULL
Not built with -rdynamic so unable to print a backtrace
** Message: don't know how to handle text/uri-list
Rhythmbox-Message: Missing plugin: gstreamer|0.10|rhythmbox|text/uri-list decoder|decoder-text/uri-list
Rhythmbox-Message: Automatic missing codec installation not supported (helper script missing)
** Message: don't know how to handle text/uri-list
Rhythmbox-Message: Missing plugin: gstreamer|0.10|rhythmbox|text/uri-list decoder|decoder-text/uri-list
Rhythmbox-Message: Automatic missing codec installation not supported (helper script missing)
(rhythmbox:3433): Rhythmbox-CRITICAL **: new_playing_stream_idle_cb: assertion `entry != NULL' failed
what can i do?????

i have already do exactly the same as the guide said
pacman -S gstreamer0.10-gnomevfs
pacman -S gnome-python
i even activate the DAAP
/etc/rc.d/avahi-daemon start
but it still doesn't work
Missing plugin: gstreamer|0.10|rhythmbox|text/uri-list decoder|decoder-text/uri-list

Similar Messages

Why my screen iphone don't work well?

Why my iphon's screen don't work well?

Two things to try:
First, reset the phone by holding the sleep and home button until the Apple logo comes back again. You will not lose data by resetting.
If this does not work, set it up as new device, explained in this article:
How to back up your data and set up as a new device
If still no luck, your hardware might be damaged and the phone has to be serviced.
iPhone - Contact Support - Apple Support

Color don't work well in Mac book pro 13" and monitor flash sometimes? Please help me!

Color don't work well in Mac book pro 13" and monitor flash sometimes? Please help me!

Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" warnings that etrecheck sometimes spews mean nothing. Those warnings are not a reason to reinstall the OS, or to do anything else at all. They should be ignored.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup.

Safari don't work well

My safari (latest version) not go well with my MBP (lion OSX). I don't know why everytime i open a web, it become just words without image or colour. Somebody help me.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

New AE (n) don't work well with old AE's.

Unfortunately, the new AE's don't seem to work very well with the old ones. Anyone else have this problem? Multiple problems, it seems. (Yes, I have the settings right).

I have a similar problem with a TC and an older Express(g). I've not been able to figure out how to get them cooperating on a WDS network.

Can it be that OS 10 and Flash don't work well together? Internet browsers are freezing up

I started this discussion on the macbook pro forum but no one has figured this out and I'm beginning to think this could be an OS 10 problem, so I'm posting here. No matter what browser I use (Safari or Firefox), after a little bit of surfing, the browser freezes and I get the spinning circle of death. Only thing that works to fix it is to reboot. But then the cycle repeats. I've found discussions of other fixes for this but nothing has worked. So far I have:
Added open source DNSs
Updated all software
Scanned for malware with Sophos (none found)
Cleared browser caches
Run disk utility and repaired all permissions
Reset Flash settings to disable hardware acceleration
Moved large files to an external hard drive to free up more disk space
Checked to see if I have a bad Shockwave plug-in that was the culprit for others (didn't have it)
Called Mac support and was advised to use disk utility
None of this has worked. In other cases, people felt the problem had to do with flash. For them, changing the hardware acceleration setting (as I did) or removing the bad plug-in fixed the problem. This has not helped me, and I'm at a loss of what to try next. Of note, nearly every other instance I turned up about this involved SLeopard 10.6.6. That's what I was using. I updated to 10.6.8, but it didn't help. Any suggestions?
I'm on a Macbook pro with 10.6.8, 4GB of ram and a 320GB hard drive showing 120GB free.

First level Console messages are usually too general. Those are kind of generic and I'm not seeing anything related there to your problem. You need to open Console and navigate inside to system.log.
This really needs fine some tooth troubleshooting. It could be so many things causing the problem. I'd call Apple back and get on the phone with a senior tech who can take the time to walk you through everything that needs to be looked at. Sounds like the tech you got either wasn't too skilled or ready to do that.
One of the first things to try is to create a new admin user and test for this there. The Apple tech should have suggested this. If it doesn't happen there, you know it's specific to your regular account and not system wide.
You could take a shotgun approach and throw Applejack at it. Make sure you do the underlined steps as well.
Download:
http://sourceforge.net/projects/applejack/
Article on using:
http://reviews.cnet.com/8301-13727_7-10334620-263.html?tag=mfiredir
It runs in single user mode, where it runs more safely than other maintenance/cleaning programs because there is less chance of interference from the OS. After installing (you won't see it in the Applications Folder) hold CMD-S at startup. You will get a black screen with MS-DOS like text. Just follow the prompts: type in "applejack AUTO" and it will run through the following:
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
You can also run tasks selectively and for specific users by typing in "applejack." After running in "AUTO," you can go back and run it again as "applejack," steps 3 & 4 only, for your user.
The first reboot will take much longer than usual, as it rebuilds caches. It may take several restarts to see the benefits. Because of the deep cache cleaning in AUTO mode some applications may tell you they are being opened for the first time.
NOT YET UPDATED FOR LION (although it is reported by some that it is working)
(Adapted from post by BDAqua)

Cineform files don't work well on Mavericks

Quicktime converts a CineForm file before playback in Mavericks. Why is that? Before Mavericks it worked just fine. Even previewing in a Finder-window isn't possible anymore. Anybody out there who knows why Apple has done this? Is there a workarround?

Were all three 8330 devices you had having this same issue?
Were they all gotten from the same store?
I'd assume that store has a batch of bad devices. Exchange it from different location from a different batch.
Or, better yet, for your troubles, ask VZW to upgrade you to a 9630 device
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ICloud Mail & Contacts don't work well together?

I have iCloud activated for Mail and Contacts. Now, when in Mail and I try to address an email, the address book shows up but none of the sub address books show up. How do I get them populated? Do I have to go back to syncing with MobileMe?

this is not a bug - but you're right its a serious problem.
The same happens on Linux/NVidia too igf I force antialiasing and use the OGL pipeline.
This happens because java tries to accerlate some graphic opeerations with DirectX or OpenGL and it simply wants the graphic-card to render the stuff it sends the graphic card.
However with AA turned on you graphic card tries to optimize the data coming from java which is nonsence since the AA was designed for games.
So basically its neither java's fault nore the dirvers one.
Both work as expected - but not well together. I think driver-manufactureres should provide a common API for telling the driver that this and that application does NOT want to be AA'ed even if its forced.
Till now there's nothing SUN could do about this issue...
lg Clemens

The sites I make with iWeb don't work well on Windows!

I've made a site with iWeb 08 and it works fine with Safari, and at times with Firefox.
However, it has some "glitches" when you use Internet Explorer on a Windows based computer.
Especially the "Search" button.
Has anyone noticed this? Is there a fix?
I'd like all type of users to view this site, not just Mac users.

IE (especially versions 6 and below) are notoriously non-compliant. There is not much you can do if your visitors are using IE other than place a small warning on your site that says something along the lines of 'Best Viewed in FF or Safari, although strictly speaking this is against accessibility guidelines and not good web design practice.
You could try and incorporate a bespoke Google search into your site as a replacement.
Hope that helps
AAi

Preview don't work well in exhibit exif parameters

If I choose italian language preview don't show exif parameters.
Instead if i put english language, all is ok.
Someone knows haw resolve this issue?
thanks

seems fixed with this method:
http://groups.google.it/group/it.comp.macintosh/browse_frm/thread/6954f6bcc67df8 a8/7860bf2927f8380d

IPad: Email calendar invites don't work well

When receiving an email invite I am able to process the invitation with ease on my iPhone 4s (running 5.0.1). Specifically, I can alter alerts and select among the many calendars I have. The process works flawlessly. When trying to perform the same, basic function on my iPad 1 (running IOS 5.0.1), I am unable to modify alerts or select among any calendar. Strange. Anyone have a clue as to what the problem may be? Hope it's not a bug.

Hello DaveL56,
The following article can help stabilize AirPlay from your iPad.
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
Allen

Can anyone get these to work??!!??!! Airports don't work well together

I have two airport expresses. I bought the second one to extend the range of my existing airport network. Both airports work fine when configured as a standalone main base station. But, when I set one up to be a remote/relay station, performance on both devices suffers. I know some decline in internet speed is expected, but mine slows to a crawl . . . like less then 10kb/sec. Plus, my wireless range does not appear to be extended at all.
Additionally, airtunes performance is horrible. I can't get a song to play for much more than ten seconds before it cuts out, pauses, and then starts up again 20 seconds later. It really seems like the connection is just cutting out, both in airtunes and internet, every few seconds.
I have already documented my problems in more detail in this thread: http://discussions.apple.com/thread.jspa?threadID=989979
Any advice??

Be aware that each WDS link cuts the available bandwidth in half.
It could be that you are experiencing RF interference from other devices operating at 2.4 GHz. Have you tried using a different channel? You can change the channel until you find a channel which works better or you run out of channels.
KB 58543, AirPort: Potential sources of interference

Aperture 3 and Time Machine don't work well together

I've noticed that my Time Machine (10.6.2) creates large backups (at least 250 MB) when I've only opened up Aperture 3. No retouching, no adding of photo's (of course), no changes. Just opening Aperture and a bit of scrolling.
Is there a way to prevent this? Is Time Machine perhaps backing up a cache? Where would I find this cache so I could perhaps exclude it from the TM?
Thanks !

the main idea of time machine is being able to restore your system to its latest state, or any state in time when it made a backup. in order to be able to do this, it just has to backup any file that's been changed, even if it's just a database having been touched by sqlite3. aperture 3 now saves the way you were viewing or where you were in a certain album or project, so when you come back to it, it takes you to exactly the same place. i guess it's necessary to write to a couple of database files to do that, even when you're just browsing. i kind of like this functionality.
just three quick comments:
-disk space is dirt cheap nowadays, so getting a big time machine backup disk shouldn't be any problem.
-since getting previous versions of your aperture library back is usually not very likely to happen, what i do from time to time is go in to time machine, select my aperture library and delete all copies of it. this takes quite some time, but on the next backup, you'll have your current library backed up and a time machine volume with more space.
-about it taking too long over wifi: backing up is a background process. does it slow down your other stuff while you're working? if so, let it run only when you're not at the computer, or hook up a big usb disk locally.
j

FF 3.6.3 check boxes don't work well

When I check the check box such as the one below in this Ask a new question, it takes several tries before it sticks. Before, I can easily tab and hit space bar, or use the mouse. Now it seems to be stuck or missed. FF 3.6.3 unfortunately seems buggy on my computer. I pray for it's recovery.
== This happened ==
Every time Firefox opened
== Since installing FF 3.6.3

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Raise FORM_TRIGGER_FAILURE don't work well.

Dear All,
I'm facing a problem that I can't understand well.
I have a screen that contain two fields: Field1 and Field2.
The control I had to add: is to avoid saving duplicate records, and also do not save a record if one of these fields is empty.
I wrote the trigger KEY_COMMIT, where I did:
Line: -----
declare
     x number;
     ret number;
begin
if ( (:Field1 is null ) and (:Field2 is null ) ) then
     ret:=msgbox('Please choos a Field1 and Field2');
               RAISE FORM_TRIGGER_FAILURE;
else if ( (:Field1 is null ) or (:Field2 is null ) ) then
     ret:=msgbox('Please Enter Field1 and Field2');
               RAISE FORM_TRIGGER_FAILURE;
               else
                    begin
                    select count(*) into x from TABLE1 where xxxxxxxx=:Field1;
                    exception when others then
                         x:=0;
                    end;
                    if x>0 then
                         ret:=msgbox('Field1 Already Registred');
                         :Field2:='';
                                             RAISE FORM_TRIGGER_FAILURE;
                    else
                         commit;
                    end if;
end if;
end if;
end;
Line: -----
The problem in that is when I click on EXIT button, I get this message: " Do you want to save all modifications you made? "
If I click YES => I find in te table TABLE1 that, also the records having one of the above fields empty, are saved.
How Come?
As I know, Raise FORM_TRIGGER_FAILURE must stop the trigger and then, no commit. It's not the case !
Can someone help me in that? Did I wrote the wrong trigger ?
Many Thanks for your help.
Imad QANDOUCI

you wrote an KEY-COMMIT Trigger. But you press KEY-EXIT. Why should KEY-COMMIT Trigger fire on KEY-EXIT?
Put your checks to PRE-INSERT and PRE-UPDATE triggers (to both!). Best, avoid duplicate code by writing a procedure consisting the checks and coll the procedure in the triggers.

Rhythmbox don't work well

Similar Messages

Maybe you are looking for