Ricoh aficio 3245c for mac driver

do you have richo aficio 3245c driver for mac os x 10.6.7 thank you

Ricoh has a PPD for the Aficio 3245C which you can obtain from here. But to use this PPD your 3245C must have the Postscript kit installed, which appears to be an option in some regions. So you will need to confirm if the Postscript kit is installed before can use the PPD.
If the 3245C does not have the Postscript then you could look at using the pxlcolor-Ricoh driver provided by The Linux Foundation.

Similar Messages

Ricoh Aficio scanning to mac Mini Server

I have a brand new Mac Mini Server, os is up todate 10.8. something.
I have two XP Pro SP3 pc's that access file shares on the mac mini.
They are ok except the drop the connection due to what I believe is the SMB 1.0 on the XP and 2.0 version on the mini fighting each other.
But it works for now with the XP machines till I can upgrad them to windows 7.
We have a Ricoh Aficio MP C2550.
I want to scan to the mini.
I cannot access SMB shares on the Mini from this printer.
I tried FTP but cannot access the FTP site either.
I can access both SMB and FTP from the XP machines.
I am new to Mac's. I have been a Windows guy since 1994.
Any help would be greatly appreciated on this.

Hi Fultonm. I had the same issue and the steps below resolved my scanning and it is still workin OK now.
Scanning to MAC 10.7 and above using FTP
Turn on the FTP server on the destination MAC using the following command which needs to be enter from within the “Terminal”:
sudo -s launchctl load -w /System/Library/LaunchDaemons/ftp.plist
To stop it:
sudo -s launchctl unload -w /System/Library/LaunchDaemons/ftp.plist
Confirm the FTP server works by typing:
ftp localhost
If the ftp server is configured correctly, you should see the below:
$ ftp localhost
          Trying ::1…
          Connected to localhost.
          220 ::1 FTP server (tnftpd 20100324+GSSAPI) ready.
          Desktop/My ScansName (localhost:):
To enable the FTP server, you will need to enter the password of the user account that your are currently logged into in order for the FTP server to be created. If you need to turn off FTP enter “unload”. The FTP server will usually be com.apple.ftp.
Create a scans folder on the desktop, i.e. My Scans.
Share the scans folder
Log onto the copier which the scans need to be sent from.
Open address book and select to add a new scan destination.
Select “file” as the scan type and change the send method from “SMB” to “FTP”.
Enter a name for the scans destination as usual.
Enter either the IP address of the MAC or the hostname and folder path into the relevant boxes.
On a Ricoh both the IP/Hostname and the folder path can be enter into the “Hostname” Box.
On a Canon, enter the IP/hostname into the “Hostname” box, and enter the folder path into the “Folder Path” box.
You do not need to use the “\\” for the hostname or folder path as you would when setting up scanning to a Windows machine, i.e. \\MYCOMPUTER\DESKTOP\MYSCANS.
Instead you enter the IP/hostname and folder path in the following format;
Ricoh –
Hostname: MYCOMPUTER/DESKTOP/MYSCANS
Canon –
Hostname: MYCOMPUTER
Folder Path: DESKTOP/MYSCANS
Enter the user account name and password that is going to be used for authentication.
Save the settings and test the scanning. IF configured correctly using the steps above the scans should be sent to the MAC using FTP and appear in the scans folder you have created.
The fields (hostname, folder path, authentication, and so on) for setting up the scan destination information on the copiers GUI will be dependent on the manufacturer, but will all follow the same principle.
Hope this works!

Can't Print from OS X to Ricoh Aficio 3245C

I have tried printing from OS X 10.4.8 to my copier at work but can't. I have communication between the 2 but it never prints. I have installed Ricoh's drivers for OS X and it reconizes that it's there but doesn't follow through printing. Can anyone help? I am bugged by this. Thanks
Mac OS X (10.4.8)

I figured this out.

Setting the User Code for RICOH Aficio MP C 4000

Hi guys, initially I had trouble setting my office network printer. But the thread at http://discussions.apple.com/thread.jspa?threadID=2235451 helped a lot. Now I am still stuck as the office uses "user codes" for each of the staff but when I tried to set it up, i couldn't punch in any numbers as only 4 options were presented ie nos from 1001-1004.
I might be wrong but it seems to me that the user codes could be hardcoded in a text file somewhere. Question is how do I do that?
Thanks

so ive read and done everything on this feed. i also noticed that this question was marked at answered but it doesnt seem like the answer should be to hook into another printer.
im trying to print to my office printer, Ricoh aficio mp c5000, and im so close i can taste it but i must be missing something.
ive called applecare, ricoh, downloaded wayyy too many drivers, done everything in this feed and still nothing... well not exactly.
when i hit print the printer wakes up and makes noise but it doesnt pickup any paper or actually print. i can hear things startup and start spinning but nothing prints.
i know that for all the pc's that work on this printer, have to print in black and white or otherwise enter a Valid Access for color. I dont even see the option of valid access in the print settings.
also
i saw an option of finisher, option tray, upper internal tray, and internal shift tray. would those settings play a part as to why im not printing (using the Ricoh Aficio MP C5000 PXL driver)
Please help

Problem printing to ricoh aficio 5502 OSx 10.10

greetings, one of my co-workers is having an issue printing in the latest version of adobe acrobat reader,free version build number evades me but we downloaded it yesterday 3/12/15 so it's the most current. he can print most PDF files as long as they are able to be opened in the mac preview app but there are a few that simply cannot be opened with that app and must be opened with reader. any PDf file that he opens in adobe cannot be printed, even the ones that can be printed with the viewer app. the printer is a ricoh aficio 5502, his mac has all updates installed, the latest version of reader and the most current drivers for the printer. every other program is able to print to the printer fine as stated before any PDF that can be opened in preview app can be printed from that app perfectly.
steps i've taken to resolve the issue are as follows
i've deleted and reinstalled the reader app.
i've removed and installed the latest printer driver for the mac
i've installed all updates to the mac OS.
i've checked other programs to make sure they all print and they do.
i've sent the files he's printing to another machine (windows based, no other macs were available at the time to test it) and the file prints fine.
any and all help is greatly appreciated.
james

when i open any pdf file in adobe and click print the file spools, i also shows up on the pending job list on the printer but the printer never actually prints anything. it's almost as if adobe is spooling out garbage and the printer receives it and just drops the data without even trying to print it. i'd fault the printer itself but i can print to it from any other program on this particular mac without any problems, it's only items printed in adobe reader that will not print and it's consistent with any pdf file that we try to print using that program on that mac.
the only common denominator is the adobe reader software.

Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code

unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print

I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

HT1338 I need a Ricoh SP 204SN printer driver for Mac OS X Mavericks. Can anyone help.

I need a Ricoh SP 204SN printer driver for Mac OS X Mavericks. Can anyone help.

This is a few years old, but it's the best I can do. I stopped using Windows many years ago.
If you have specific questions, maybe I can answer, but remember I don't have access to any Windows newer than XP. I think setup will be similar, but I don't know if the Windows-side software will be compatible with W7 or W8.
http://blog.iharder.net/2011/01/25/share-a-windows-printer-with-a-mac/

Ricoh Aficio MP C4501 with access codes for color printing

Hi,
I read the discuss called "Ricoh 3245C with access codes for color printing", and I have a similar problem with a Ricoh MPC4501 printer. The printer is connected to many Windows PCs and my brand new iMac. It requires just User Codes authenication. PostScript is not installed on the printer (could this be the problem?). I've tried all the suggestions brought up in the mentioned discussion but I still can't print. It seems like the printer is not connected to the Mac. Here are the answers to the questions asked in the previous discussion:
Is PostScript module installed?
No, I guess. PS is not one of the languages included on the Configuration Page.
What languages does your printer understand?
RPCS [3.10.14], PCL 5c [1.02] and PCL XL [1.02]
What drivers are you using?
I tried the one from the Ricoh site for OS10.8 (http://support.ricoh.com/bb/html/dr_ut_e/ra/model/mpc41/mpc41en.htm) as well as the driver (three downloads) from Linux (http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o). Neither worked. It might be helpful to mention that the Linux driver enabled me to print to a Ricoh Aficio MP 4001 that doesn't require authentication.
How are you entering your User Code?
Depending on the application. For Adobe apps, which are my main concern, I would have to click on the Printer button in the Print dialog to open the system Printer dialog, then enter the user code there under Job Log. I had to use the script provided in the previous discussion (http://webpages.charter.net/mbroughtn/beta/RicohUserCodes.zip) to add my User Code.
How are you connecting to the printer -- what protocol?
I'm not sure. I didn't find any of the protocols cited in the previous discussion on the Configuaration Page. If it helps, I know that the printer has an IP address on the network. And as I mentioned, it's mainly connected to many Windows PCs.
Any help is appreciated. Thanks.

Can't help with user codes, but I suggest you try IP HP jetdirect first whenever you add an enterprise net printer. You could always look on a windows computer for printer port configjration. There, you will find jetdirect called raw port 9100 protocol.

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

Photoshop printing presets for Ricoh Aficio 3260c

I work in a small printing office -- we use all Macs and we do all of our design work with either Photoshop, Illustrator, or InDesign, printing it all on a Ricoh Aficio 3260c. We're using only Pantone colors in the designs but I just feel that there's some setting that isn't completely right in our printing process/programs.
I was wondering if in Photoshop/Illustrator/InDesign I should alter any of the printing presets/profiles so that it's set up specifically for that printer, if that makes sense. I know that there is a "Pantone Driver" for our printer, but what advantage does that give us over the standard driver and could that pantone driver automatically contain the presets needed for printing pantone colors on our printer without altering the settings in Photoshop?
I've tried contacting various support and Ricoh but can't get any real help/information on what we're trying to do as nothing is actually broken, thus they don't really care. I just feel that there needs to be some tweaking along the way...so if you can help, that would be great! Thanks.

danny,
If you are printing to a CMYK printer, why are you specifying Pantone-specific colors. First, a large number of those colors are outside the CMYK color gamut, so yes, you will get color surprises.
That said, if Ricoh does have a Pantone driver, I would recommend acquiring it as it probably will give a better interpretation of Pantone colors for that specific printer, than more generic converting-on-the-fly routines would. (Otherwise, why would they have bothered to develop and market it?)
Speak to a Ricoh tech rep and see what he/she says about this. If first-line support is clueless, work your way up to the Ricoh food chain until you reach someone in a supervisory capacity who can answer your question.
Neil

Mac Pro OS X 10.8.3/Ricoh Aficio MP C2500/Share_Scan_Folder Help...

Hello aIl
I'm giving an small project from a small firm using cloud service for their small business to setup a Ricoh Aficio MP C2500 printer (Scan-to-folder only/shared) within their Network of 5 to 8 user, I only have 24 hours for a solutions due the fact that the first IT Support guy couldn't make the configuration to setup a scan fold to folder/shared.
The Printer is already in place and working just fine but not scanning and here is where I take over.
Here's my research base of the actual device...
Ricoh Aficio MP C2500
Aficio MP C2000/C2500/C3000

John,
A day after my post, I spend two hours in two day troubleshooting the Ricoh MP C2500 Scanner setup configuration by email client and also I tested a shared folder that I setup in one specific user but that didn't work out either.
The project is for a startup bussines with 5 user Mac Pro, Mac OS X 10.8.3, No Server at all because they are using cloud service https://www.sugarsync.com/business/ I have done an instensively research even called Ricoh support but cant provide me any help with out a contract service. at point another Richo support sugested to check the Firmware that is (Specical Custom Firmware) for Mac OS X 10.8.3 here http://support.ricoh.com/bb/html/dr_ut_e/re/model/mpc25/mpc25en.htm#Mac OS X 10.8 and I haven't perform this task due to the fact I'm not familiar after installation.
Here I have the Ricoh Aficio MP C2500 Scann To email White Paper PDF http://www.tsrc.ricoh-usa.com/pwhp/Scan_to_E-mail.pdf configuration but it doesn't work for the Mac OS X 10.8.3
Here I have some screenshot from the PDF but it does not detect my shared folder in the network.
One setup configuration I did is setting up the path manually as fallow \\administrator\user\scanner this normally will work on a Windows and now I have to modify to \\192.168.X.X\user\scanner in the MFP Configuration at the
Operation Panel.
A second method is to setup a USB driver to the Router Network as a Network driver (Scanner) shared folder if the router has that option and perform the same test at the Operation Panel again and that might work and before I do this I have to make sure I can ping the printer IP by lunching Terminal...

Can't print or properly install drivers for Ricoh Aficio MP C6000

Hi all,
I work in a Windows environment and I'm trying to get my MacBook Pro (OS 10.6.4) connected to the color copier/printer here. The model is a Ricoh Aficio MP C6000. I was able to download the PS drivers off the Ricoh website but when I install them and try to print, I get this message in the print queue:
"The printer software was installed incorrectly. Please reinstall the printer’s software or contact the manufacturer for assistance."
Any idea what's going wrong? The image of the printer doesn't match the actual printer which usually throws me off and indicates it's the wrong model installed. As an aside, I am able to print with this printer just fine through Parallells via Windows XP. Has anyone got this model working, and if so, specifically what drivers did you use? I'm at a loss here.
Thanks!

I am not able to find the OS X 10.6 drivers on the Ricoh web site. You most likely installed the drivers for a previous version of OS X that will not function properly in OSS X 10.6.
I would suggest that you delete your printer. Then delete the following items that you most likely have installed:
/Library/Printers/PPD Plugins/ricohJobLogC.plugin
/Library/Printers/PPDs/Contents/Resources RICOH Aficio MP C6000
/Library/Printers/PPDs/Contents/Resources RICOH Aficio MP C7500
/Library/Printers/RICOH (the entire folder)
The next thing you should do is to determine what printer languages your Ricoh supports. Your IT person should be able to tell you. Alternatively, you can have the printer print out a configuration sheet from the printer control panel.
If the printer does have a PostScript module installed, then download the OS X 10.6 Ricoh drivers from _http://support.apple.com/kb/DL902_.
If the printer does not have the PostScript module installed, it should be able to use a PCL 6/PCL PXL driver. In this case, use the Mac OS X packages for the pxlmono driver. These can be found at _http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o_. Be sure you also install Foomatic-RIP and Ghostscript.

Can't print from mac book pro to Ricoh Aficio MP C4500

Hello, today i started working in a new office, that uses a Ricoh Aficio MP C4500 printer and everyone in the office uses windows computers. I have a Mac Book Pro 2.26 GHz Intel Core 2 Duo, on it, I am running Mac OSX 10.6.6.
When I have tried to print several different file types such as .pdf, .doc, .txt, etc. the printer prints out usually 20 pages that are all coded or blank and nothing similar to what i printed out. I'm guessing this is due to the printer not understanding the language of the data i send to it.I know that i am successfully connecting to the right printer.
I've visited several webpages that discuss how to fix the issue but none of them have worked.
I have tried downloading the mac osx 10.5 drivers from the Ricoh website(they didnt have 10.6) that didn't work and when i printed i still got all blank/coded pages.
Next I went I tried typing the the printer IP address to my browser url... that didn't help.
Next I went to the apple website and downloaded all of their mac osx 10.6 ricoh aficio drivers and when i printed i got all blank/coded pages again.
next i went and downloaded the "ghost script" "footmatic" and "pxlmono" and when i printed i got all blank/coded pages again.
all of the other webpages gave no other advice. Also, when printing each time i tried all of the different protocols, that didnt make a difference.
if you can advise, it would be much appreciated! Thanks!
-Nick

nnelson10 wrote:
When I have tried to print several different file types such as .pdf, .doc, .txt, etc. the printer prints out usually 20 pages that are all coded or blank and nothing similar to what i printed out. I'm guessing this is due to the printer not understanding the language of the data i send to it.I know that i am successfully connecting to the right printer.
It sounds like the printer does not have the optional PostScript module installed.
Next I went to the apple website and downloaded all of their mac osx 10.6 ricoh aficio drivers and when i printed i got all blank/coded pages again.
The drivers that are available from the Ricoh web site or are available from Apple only work when the PostScript module is installed.
next i went and downloaded the "ghost script" "footmatic" and "pxlmono" and when i printed i got all blank/coded pages again.
After you downloaded and installed the Ghostscript, Foomatic-RIP, and pxlmono drivers, did you delete your existing Ricoh print queues and create new print queues? Did you choose the driver that had pxlcolor in the title?
If the pxlmono/pxlcolor drivers do not work properly for you, you will need to have the IT person tell you what printer languages the printer can use. Alternatively, you can print a configuration page from the printer keypad that will print a sheet telling you what languages it can use.

Problem in creating output device for RICOH Aficio MP 2000 PCL 5e printer

HI,
i have problem in creating a output device for the RICOH Aficio MP 2000 PCL 5e as i am unable make out which device type should be assigned and what should be given in spool server tab.
i have pinged the printer in lan and it is connecting.
when i am giving the print from new ricoh printer its going to some other old printer in network.
we are unable to get the logo of our company when we are taking print from this printer from sap level.
kindly suggest what other things has to be taken care.
regards
anil

Hi,
shall i do in development and then import the same to quality and production.
also tell me what shd i put in these tabs
version-sapsripthandling-driver
list handling-printer driver
printer character set-character set-syt character set
we can find this tab in create option of device type.
when i am trying to save its showing it has to be done on program level.
kindly reply back as it will resolve the big issue for me.
thanks
anil

New printer: Ricoh aficio 6330n, halftone screen freq. stays at about 106lpi. PS driver 6.0.0

Ricoh aficio 6330n, halftone screen freq. stays at about 106 lpi no matter what I set in print output section. InDesign CS3. PS driver 6.0.0

In general, most PostScript personal and network printers totally ignore screening settings set in the PostScript file itself and either use “secret sauce” screening or require operator panel controls to adjust screening. Contact Ricoh for further support on this.
- Dov

Ricoh aficio 3245c for mac driver

Similar Messages

Maybe you are looking for