Ricoh Aficio FX16 on iMac Intel

Hi!
I always hated printers!!!!! I recommended Macs to my sister in law. Now she bought an iMac Intel, but I don't find drivers for her multifunction/printer: Ricoh Aficio FX16.
I am really unprepared for printers issues. I thought I could install a "generic" driver to make it work, but I didn't succed. Plus I don't have internet at her place, so it's really a nightmare!
Can someone point me to a simple solution to just print with this Ricoh printer inside Mac OS X?

Since some (not all) Ricohs use HP's PCL language, I'd try "HP Laserjet 6 Series, Gimp-Print" for model.
After that, your best bet may be using Windows... sorry.

Similar Messages

Gestetner Aficio CS225 on iMac Intel 2Ghz Dual Core, OSX 10.4.10

Could anyone help me to setup this multifunction printer on a new iMac Intel?
I've downloaded from Gestetner site the latest ppd (y. 2002, vers. 1.1), and put it into Library/Printers/PPDS/Contents/REsources/en.lproj but when trying to add a new printer in Print Center I can't match the right ppd, only a generic postscript printer. But this generic ppd doesn't dupport A3 paper format.
Could anybody suggest a solution?
Thank you in advance.

Welcome To  Discussions silvia2k!
I'm not at all familiar with that printer, but here are some observations.
"...(ppd (y. 2002, vers. 1.1),..."
On the Gestetner Driver Download Page, under Color Multifunctional, there are two versions listed for the C5225, v1.0 & v1.1, both with dates of 1999.
But if you notice, no matter which you choose, you can only get a download for v1.0.
The URL/Links listed below, are different, but they both lead to v1.0, when you select Mac OS X.
v1.0
v1.1
"... put it into Library/Printers/PPDS/Contents/REsources/en.lproj..."
But whichever one you need, I think you must install it.
Quoted from that website:
"PPD Installer
This PPD installer is used to install a PPD (Postscript Printer Description) file on Mac OSX. PPD files contain descriptions of printer capabilities such as paper sizes, number of input trays and duplexing. Once the PPD file is installed on the system using the PPD installer, the PS driver that comes bundled with Mac OS X can use the information in the PPD to control the print device and enable full functionality. Please see the Readme file for information about compatability with versions of Mac OS X."
ali b

I can't print to my RICOH AFICIO SP C410DN

I've tried for a week now to figure out how to coneect my RICOH AFICIO SP C410DN to no avail. HELP?
My printer is connected via an ehternet cable from my modem to the ethernet port on my printer.
I go to Printers & Scanners and it will not find it.
When I press IP, I'm not sure where to find my printer IP address or host name. I've printed out my configuration page and the numbers on it don't seem to work.
Not sure whuch Protocol pick either.

My router ended in .0.1. I ended up assigning a new and dedicated IP address in the printer per your instructions. I set the ending to .0.166. Once I typed it in, the protocol self selected and the name of the printer popped up in "Use:" at the bottom.
I added it and test printed a screenshot. Whammo! It printed!!! Thanks so very much. This was such a head-ache trying to figure out! Even the printer company signed on to my mac two times and connected to the printer but when I got back home at the end of the day and wanted to print, it didn't work. I was beginning to lose heart. I'm so relieved now. This printer was a $1300 printer and work horse! I was beginning to think that I would have to get rid of it.
The first major thing that I had to figure out was this... I used to just plug the ethernet cable in the ehternet port on my computer. I was instructed I couldn't do that any more and had to use a port on the router.
Since swithcing to Mavericks, I've had some serious head-aches getting used to it and setting up all of my Apple products. (iMac, iPad, iPhones.) Having been on a mac for over 20 years, I usually wait quite a while before I upgrade OS's. Letting others work out the bugs. Never the less, much thanks Grant!

Ricoh Aficio 2018 printer not working with 10.9.1.

Hi All. Please help. I am unable to get Ricoh Aficio 2018 printer to work. I am running 10.9.1.
I have got it working once by downloading the foomatic, ghostscript and pxl drivers, but we moved and I had to dismantle everything and now it won't work. Last time we had a modem/router that the blue cable from the Ricoh was connected to, but this time we have a USB modem so the blue cable is connected straight into the iMac.
I have printed a config page from the Ricoh and see that DHCP is on, and it gives me the IP address, but when I go into system prefences in the iMac and try to add a printer with this IP address, it just doesn't work like last time. I choose LPD as the protocol and search for the Rich Aficio 2018PXL option for the use, but still not working.
any ideas would be massively appreciated.
thanks

Shrunken wrote:
I made those changes but strange thing is that the facsimile button lit up as red and I don't even use the fax function on this multifunction machine.
When this occurs with our Canon's it is due to the document feeder being unavailable for some reason, such as some other machine function is using the feeder. Other than that I'm not sure why this would occur.
Shrunken wrote:
I thought I would check with you about what I should set the 'delivery options' to. If you choose on then there are 2 tabs - server 1 which is current 10.0.0.2 and server 2 which is 0.0.0.0. should this be set to on?
Not really sure what this "delivery options" setting is for. Normally when I see that menu it is for what happens with the document after it is delivered.
That first server address sounds like a local router address. Maybe a left over from the previous network configuration? If I knew more about what this setting was meant to achieve then I may be able to answer better. I will see if I can find information from Ricoh.
Shrunken wrote:
Also I checked in the 'about outlook' and the incoming server was different to what I had emailed to you. so I changed it to what was in outlook. I hope that is right?
Yes. It would be the correct approach to use the same settings in the copier as you have set in a working email client.
Shrunken wrote:
Also, under scanner features/destination list settings there are two options:
- destination list priority where you can choose either email or delivery server. which should I choose here?
- update server destination list. when I choose this one, it tells me that it has failed.
I would think that you want email, as you are attempting to connect directly with the email server.
And I'm not sure what the update destination list is mean to do. You may have to contact Ricoh for help on this.
Just one more thing to note. Because you are connecting the Ricoh directly to the Mac via Ethernet cable, you will have to enable Internet Sharing on the Mac so the Ricoh can connect to the Internet and thus Bigpond. This setting is located in System Preferences > Sharing and you will need to set "Share your connection from:" to the USB modem and the "To computers using" to Ethernet.

Ricoh Aficio MP C4501 with access codes for color printing

Hi,
I read the discuss called "Ricoh 3245C with access codes for color printing", and I have a similar problem with a Ricoh MPC4501 printer. The printer is connected to many Windows PCs and my brand new iMac. It requires just User Codes authenication. PostScript is not installed on the printer (could this be the problem?). I've tried all the suggestions brought up in the mentioned discussion but I still can't print. It seems like the printer is not connected to the Mac. Here are the answers to the questions asked in the previous discussion:
Is PostScript module installed?
No, I guess. PS is not one of the languages included on the Configuration Page.
What languages does your printer understand?
RPCS [3.10.14], PCL 5c [1.02] and PCL XL [1.02]
What drivers are you using?
I tried the one from the Ricoh site for OS10.8 (http://support.ricoh.com/bb/html/dr_ut_e/ra/model/mpc41/mpc41en.htm) as well as the driver (three downloads) from Linux (http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o). Neither worked. It might be helpful to mention that the Linux driver enabled me to print to a Ricoh Aficio MP 4001 that doesn't require authentication.
How are you entering your User Code?
Depending on the application. For Adobe apps, which are my main concern, I would have to click on the Printer button in the Print dialog to open the system Printer dialog, then enter the user code there under Job Log. I had to use the script provided in the previous discussion (http://webpages.charter.net/mbroughtn/beta/RicohUserCodes.zip) to add my User Code.
How are you connecting to the printer -- what protocol?
I'm not sure. I didn't find any of the protocols cited in the previous discussion on the Configuaration Page. If it helps, I know that the printer has an IP address on the network. And as I mentioned, it's mainly connected to many Windows PCs.
Any help is appreciated. Thanks.

Can't help with user codes, but I suggest you try IP HP jetdirect first whenever you add an enterprise net printer. You could always look on a windows computer for printer port configjration. There, you will find jetdirect called raw port 9100 protocol.

Can't print from mac book pro to Ricoh Aficio MP C4500

Hello, today i started working in a new office, that uses a Ricoh Aficio MP C4500 printer and everyone in the office uses windows computers. I have a Mac Book Pro 2.26 GHz Intel Core 2 Duo, on it, I am running Mac OSX 10.6.6.
When I have tried to print several different file types such as .pdf, .doc, .txt, etc. the printer prints out usually 20 pages that are all coded or blank and nothing similar to what i printed out. I'm guessing this is due to the printer not understanding the language of the data i send to it.I know that i am successfully connecting to the right printer.
I've visited several webpages that discuss how to fix the issue but none of them have worked.
I have tried downloading the mac osx 10.5 drivers from the Ricoh website(they didnt have 10.6) that didn't work and when i printed i still got all blank/coded pages.
Next I went I tried typing the the printer IP address to my browser url... that didn't help.
Next I went to the apple website and downloaded all of their mac osx 10.6 ricoh aficio drivers and when i printed i got all blank/coded pages again.
next i went and downloaded the "ghost script" "footmatic" and "pxlmono" and when i printed i got all blank/coded pages again.
all of the other webpages gave no other advice. Also, when printing each time i tried all of the different protocols, that didnt make a difference.
if you can advise, it would be much appreciated! Thanks!
-Nick

nnelson10 wrote:
When I have tried to print several different file types such as .pdf, .doc, .txt, etc. the printer prints out usually 20 pages that are all coded or blank and nothing similar to what i printed out. I'm guessing this is due to the printer not understanding the language of the data i send to it.I know that i am successfully connecting to the right printer.
It sounds like the printer does not have the optional PostScript module installed.
Next I went to the apple website and downloaded all of their mac osx 10.6 ricoh aficio drivers and when i printed i got all blank/coded pages again.
The drivers that are available from the Ricoh web site or are available from Apple only work when the PostScript module is installed.
next i went and downloaded the "ghost script" "footmatic" and "pxlmono" and when i printed i got all blank/coded pages again.
After you downloaded and installed the Ghostscript, Foomatic-RIP, and pxlmono drivers, did you delete your existing Ricoh print queues and create new print queues? Did you choose the driver that had pxlcolor in the title?
If the pxlmono/pxlcolor drivers do not work properly for you, you will need to have the IT person tell you what printer languages the printer can use. Alternatively, you can print a configuration page from the printer keypad that will print a sheet telling you what languages it can use.

Ricoh Aficio 1515mf printer setup

alright, i just got a new imac running lion 10.7.2 and im trying to setup a Ricoh Aficio 1515mf over a lan connection. i have the printer going through a an ethernet line, to a router, then going straight into the imac. i have tried instaling new drivers as well as GPL Ghostscript.mpkg, Foomatic-RIP.pkg, and pxlmono.pkg. I have set the printer up on LPD protocol (using the ip address that i got from the printer) and used "Ricoh Aficio 1515 PXL." the imac tries to set it up but says that the printer is either unresponsive, spooling, or unable to verify the pronter on your network. Please somebody help!!!!!

A couple of things to check based on the messages you are getting.
Check the IP address of the Mac and the Ricoh. Both devices need to be set to the same subnet. For example, with an IP address of 192.168.1.10 and a subnet mask of 255.255.255.0, the subnet is 192.168.1 while the network address is 10. So for this network, all devices need to have a subnet of 192.168.1 while each device would have a different network address.
If the IP addresses are correctly set then check the configuration of the Ricoh to ensure the LPR service is enabled. Or as a test, you could create another print queue on the Mac, but this time selecting HP Jetdirect-Socket for the protocol. Note the no queue name is required, which could have also been the using with selecting LPD for the protocol.

Ricoh Aficio 1515MF

Hi,
i've just bought a Ricoh Aficio 1515 MF and it works perfectlly in the prtinting feature, i cant use it as a scanner, because it doesn't apear in the scanner list.
i'm using Mountain Lion 10.8.3.
Best Regards

Hello,
I'm having a lot of problems setting up our Ricoh Aficio 1515MF printer up with our iMac (10.8.3). I had successfully set it up with our previous iMac (~July 2011) but I just can't seem to figure out how to do it again.
What driver did you use? It's not on the list of drivers that come with the computer and I've tried going to various sites to download the driver but the computer always says that the file is damaged.
Any advice would be appreciated because it's driving me crazy.
Thanks in advance!

How do I use a Verizon PC Wireless card with my iMAC Intel Core desktop?

Help! Bought a Kyocera KPC650 Wireless PC Card for Verizon wireless internet. Works fine w/ laptop because it has a slot. How do I configure my iMAC desktop to accept this card? Is there an external USB adapter? Or do I have to get one installed internally? Which adapter works with OX 10.4?
I've seen the Quatech U132 online. Will that work? Its $192!! As is the Sewell adapter too. ($209)
Any ideas? I want to get off SBCYahoo DSL and their router because our DSL line is damaged in our complex and no one is fixing it!
Thanks in advance.
tklines
iMAC Intel Core Duo Mac OS X (10.4.2) All-in-one

What protocol is Verizon using that is not compatible with the Airport Extreme built into your iMac? I have used Apple's Airport Extreme with a lot of different wireless routers with zero problems as all conform to either 802.11b or 802.11g standard both of which are supported by the built in Airport Extreme.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Full Firewire Port Failure (three different machines : iMac Intel, iMac G5, Black Macbook)

I'm experiencing a failure of all FireWire ports on all of my three machines. I believe this problem began with a faulty external, FireWire powered hard drive from G-Tech. Here are all my specs, followed by a rundown of the order of events that has lead to this situation, followed by the various troubleshooting I have done.
Equipment :
iMac Aluminum Intel - 24" Mid 2007 - running OsX 10.5.8 - currently 1 FW400 and 1 FW800 ports disabled
iMac G5 - 20" - running OsX 10.5.8 - currently 2 FW400 ports disabled
MacBook - 13" black Early 2008 - running OsX 10.5.8 - currently 1 FW400 port disabled
2 500GB G-Drives (by G-Tech) - AC powered
1 5TB G-RAID Drive (by G-Tech) - AC powered
1 250GB G-Drive Mini (by G-Tech) - FW powered
Initial Setup :
1 500GB G-Drive connected directly to iMac Intel via FW800
1 500GB G-Drive connected to first 500GB G-Drive via FW800 (daisy chained)
1 250GB G-Drive connected to second 500GB G-Drive via FW400 (daisy chained)
1 5TB G-RAID connected directly to iMac Intel via FW800>400 adapter
Sequence of Events :
I had transferred some files to my G-Drive Mini in order to move them to my MacBook from my iMac Intel. I copied the files to the G-Drive Mini and ejected it normally and plugged it into my MacBook via FW400. The drive would not mount, and the power indication light would not go on. After experimenting with various connections and cables I was able to get the drive to power with FW400 and USB connected at the same time, but the drive would still not mount.
I then plugged the G-Drive Mini back into the 2nd 500GB G-Drive as it was previously connected via FW400. This action caused the G-Drive to immediately reboot and eject itself from my iMac Intel.
I then attempted to plug the G-Drive Mini into my older iMac G5 via FW400. Immediately upon plugging in, the computer shut down, and would not restart.
At this point I kind of started to freak out. I was unaware of the extent of the damage, but was upset that the FW powered G-Drive Mini had shutdown my iMac G5. I contacted G-Tech Support and they offered to replace the drive and instructed me how to manually reset the computer's SMC by opening up the iMac and finding the Cuda switch. This worked and the computer was able to start and function again, but the FW400 port seemed to be disabled.
I then tried to swap out configurations and drives on my iMac Intel to see if there was any cable problems, but doing so, slowly rendered all my FireWire ports useless. It's almost as if the act of plugging in the FW-powered G-Drive Mini started a kind of shortout chain reaction. I soon learned that none of my hard drives would connect to any of my three machines, with any kind of cable combination via FW400 or 800.
I am currently able to connect my 5TB G-RAID drive to any machine via USB, as well as my G-Drive Mini. I am unable to access the other two external hard drives, as one has only FW400 and 800 ports and the other's USB connection is not functional as well on any machine.
Troubleshooting Steps Taken :
I have on all machines, reset the SMC in the following methods. iMac G5 - manually, by opening the case and pressing Cuda switch. iMac Intel - unplug, hold power button, restart method. MacBook - unplug, hold power button, restart method.
I have also on all machines, reset the PRAM by the Cmnd + Opt + P + R method at startup.
I have also unplugged all cables / removed battery, from all machines and left alone for a period of at least 12 hours, then re-plugged in each device one at a time.
I have also restored my hibernate mode (through Terminal) on my iMac Intel to mode 3 and also turned on Virtual Memory in system preferences and set hibernatemode to mode 7, the restarted and attempted to plug in devices. The reason I even began to deal with the hibernate mode was because I had around the same time my ports began malfunctioning, installed the DeepSleep widget, which allows you to control your computer's hibernate mode. I thought that tweaking with this setting may have made my computer incapable of recognizing devices that were plugged in. I have since uninstalled the widget and experimented with different hibernatemodes to no avail.
I also have Repaired Disk Permissions and Repaired Disk on all my machines, from within my Admin User as well as from the OsX Install Disk.
Sometimes in my System Profiler (like right now for example on my iMac Intel) my computer is "Unable to list FireWire devices," but sometimes, no warning message comes up and it simply displays the appropriate Bus speed.
I also conducted a system restore using a backup from my 5TB G-Raid Drive via USB, to a date before these problems started, but my ports are still not working.
Summary :
I am looking at a situation where all my FW ports on all my computers appear to be disabled, and possibly also on my four external hard drives, with one possible USB port malfunction on one external drive. The only root of this seems to be a malfunctioning FW-powered external hard drive.
Is this possible? Has this happened to anyone else before? G-Tech assures me that it is impossible for my 250GB G-Drive Mini to draw enough power from a computer to permanently disable any ports, but I have tried all of the FW port problem troubleshooting steps and am at a loss.
I do not have AppleCare and would like to avoid bringing two iMacs, a MacBook and four hard drives to the Apple store and take my chances with the geniuses.
I would appreciate any help or advice you all have. Thanks for reading and for your support!

Ok. So if that was too confusing, I've re-labeled this post with letters for my hard drives and some mapping of the connectivity configurations I have attempted.
Equipment :
iMac Aluminum Intel - 24" Mid 2007 - running OsX 10.5.8 - currently 1 FW400 and 1 FW800 ports disabled
iMac G5 - 20" - running OsX 10.5.8 - currently 2 FW400 ports disabled
MacBook - 13" black Early 2008 - running OsX 10.5.8 - currently 1 FW400 port disabled
1 500GB G-Drive (by G-Tech) w/ no USB port - AC powered : A
1 500GB G-Drive (by G-Tech) w/ USB port - AC powered : B
1 5TB G-RAID Drive (by G-Tech) - AC powered : C
1 250GB G-Drive Mini (by G-Tech) - FW powered : D
Initial Setup :
C > FW400-800 adapter > iMac Intel
D > FW400 > A > FW800 > B > FW800 > iMac Intel
Sequence of Events :
D > FW400 > MacBook
I had transferred some files to my G-Drive Mini D in order to move them to my MacBook from my iMac Intel. I copied the files to the G-Drive Mini D and ejected it normally and plugged it into my MacBook via FW400. The drive would not mount, and the power indication light would not go on. After experimenting with various connections and cables I was able to get the drive to power with FW400 and USB connected at the same time, but the drive would still not mount.
D > FW400 > A > FW800 > B > FW800 > iMac Intel
I then plugged the G-Drive Mini D back into the 2nd 500GB G-Drive A as it was previously connected via FW400. This action caused the G-Drive to immediately reboot and eject itself from my iMac Intel.
D > FW400 > iMac G5
I then attempted to plug the G-Drive Mini into my older iMac G5 via FW400. Immediately upon plugging in, the computer shut down, and would not restart.
At this point I kind of started to freak out. I was unaware of the extent of the damage, but was upset that the FW powered G-Drive Mini D had shutdown my iMac G5. I contacted G-Tech Support and they offered to replace the drive and instructed me how to manually reset the computer's SMC by opening up the iMac and finding the Cuda switch. This worked and the computer was able to start and function again, but the FW400 port seemed to be disabled.
I then tried to swap out configurations and drives on my iMac Intel to see if there was any cable problems, but doing so, slowly rendered all my FireWire ports useless. It's almost as if the act of plugging in the FW-powered G-Drive Mini D started a kind of shortout chain reaction. I soon learned that none of my hard drives would connect to any of my three machines, with any kind of cable combination via FW400 or 800.
D > USB > AnyMachine
C > USB > AnyMachine
I am currently able to connect my 5TB G-RAID C drive to any machine via USB, as well as my G-Drive Mini D. I am unable to access the other two external hard drives, as one has only FW400 and 800 ports (A) and the other's USB connection is not functional as well on any machine (B).
Troubleshooting Steps Taken :
I have on all machines, reset the SMC in the following methods. iMac G5 - manually, by opening the case and pressing Cuda switch. iMac Intel - unplug, hold power button, restart method. MacBook - unplug, hold power button, restart method.
I have also on all machines, reset the PRAM by the Cmnd + Opt + P + R method at startup.
I have also unplugged all cables / removed battery, from all machines and left alone for a period of at least 12 hours, then re-plugged in each device one at a time.
I have also restored my hibernate mode (through Terminal) on my iMac Intel to mode 3 and also turned on Virtual Memory in system preferences and set hibernatemode to mode 7, the restarted and attempted to plug in devices. The reason I even began to deal with the hibernate mode was because I had around the same time my ports began malfunctioning, installed the DeepSleep widget, which allows you to control your computer's hibernate mode. I thought that tweaking with this setting may have made my computer incapable of recognizing devices that were plugged in. I have since uninstalled the widget and experimented with different hibernatemodes to no avail.
I also have Repaired Disk Permissions and Repaired Disk on all my machines, from within my Admin User as well as from the OsX Install Disk.
Sometimes in my System Profiler (like right now for example on my iMac Intel) my computer is "Unable to list FireWire devices," but sometimes, no warning message comes up and it simply displays the appropriate Bus speed.
I also conducted a system restore using a backup from my 5TB G-Raid Drive C via USB, to a date before these problems started, but my ports are still not working.
Summary :
I am looking at a situation where all my FW ports on all my computers appear to be disabled, and possibly also on my four external hard drives (A, B, C, D), with one possible USB port malfunction on one external drive (B). The only root of this seems to be a malfunctioning FW-powered external hard drive.
Is this possible? Has this happened to anyone else before? G-Tech assures me that it is impossible for my 250GB G-Drive Mini D to draw enough power from a computer to permanently disable any ports, but I have tried all of the FW port problem troubleshooting steps and am at a loss.
I do not have AppleCare and would like to avoid bringing two iMacs, a MacBook and four hard drives to the Apple store and take my chances with the geniuses.
I would appreciate any help or advice you all have. Thanks for reading and for your support!

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

24" iMac Intel-Memory?

I’m going to order a 24” iMac Intel
How hard is it to put in your own memory?
I will buy from non-Apple source.
Second - should I get a 1 or a 2 GB for the extra slot?
I do know I will be getting a 1GB with the iMac 24”.
- I use iM about 4 times a year
- I use iDVD 1 or 2x’s a month (120 min long movie)
I use PHS CS twice a month.
I am getting the Video 7600/256m module.
thanks-

Your comments made go to the memory’s Co. web page-
This is what I found.
NOTE: The Intel iMac is built with the Intel Core 2 Duo Processor and has two memory sockets which can be upgraded to a maximum of 3GBs using DDR2-667 DIMMs. If both sockets are loaded with an equal amount of RAM, you can take advantage of the dual-channel memory interface for an additional performance boost
I sounds like they are saying-put the same RAM in each slot.
I will also ask the Apple rep. if I'm going to get 2-512 or one 1-GB ram module.

Problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

Problem printing to ricoh aficio 5502 OSx 10.10

greetings, one of my co-workers is having an issue printing in the latest version of adobe acrobat reader,free version build number evades me but we downloaded it yesterday 3/12/15 so it's the most current. he can print most PDF files as long as they are able to be opened in the mac preview app but there are a few that simply cannot be opened with that app and must be opened with reader. any PDf file that he opens in adobe cannot be printed, even the ones that can be printed with the viewer app. the printer is a ricoh aficio 5502, his mac has all updates installed, the latest version of reader and the most current drivers for the printer. every other program is able to print to the printer fine as stated before any PDF that can be opened in preview app can be printed from that app perfectly.
steps i've taken to resolve the issue are as follows
i've deleted and reinstalled the reader app.
i've removed and installed the latest printer driver for the mac
i've installed all updates to the mac OS.
i've checked other programs to make sure they all print and they do.
i've sent the files he's printing to another machine (windows based, no other macs were available at the time to test it) and the file prints fine.
any and all help is greatly appreciated.
james

when i open any pdf file in adobe and click print the file spools, i also shows up on the pending job list on the printer but the printer never actually prints anything. it's almost as if adobe is spooling out garbage and the printer receives it and just drops the data without even trying to print it. i'd fault the printer itself but i can print to it from any other program on this particular mac without any problems, it's only items printed in adobe reader that will not print and it's consistent with any pdf file that we try to print using that program on that mac.
the only common denominator is the adobe reader software.

Ricoh Aficio FX16 on iMac Intel

Similar Messages

Maybe you are looking for