Ricoh Aficio SP 240DN cannot print after Yosemite installed
Ricoh Aficio SP 240DN cannot print after Yosemite installed
I have this problem too.
I've installed the most recent drivers for these printers and unfortunately it's still not compatible with Yosemite.
I guess all we have to do is wait until Ricoh/Lanier brings out an updated driver for us
Similar Messages
-
Kodak 5500 - cannot print after Leopard install
Just want to throw this printer into the list of printers that do not work after Leopard install. I get a raster stream error. I have reinstalled Kodak software; deleted and readded printer, etc, etc,. Still now printing. Scanning works fine though!
Much to my surprise, I received a reply from Kodak a mere few hours after emailing them on Sunday morning. They advised me that a new version of their all-in-one printer software (1.2.0 Release 3) for Leopard will be available on the web on Monday, October 29th.
-
Macbook Pro cannot boot after Yosemite install
I just (tried) to upgrade to Yosemite (from latest version of Mavericks) on a brand new Macbook Pro. It installed the OS, I got to type my iCloud information etc - and I saw a glimpse of the desktop, but then:
I got the Black screen of death (the one where you can only reboot with text in different languages).
Then, when rebooting I got Apple logo + plus a progress bar (see attachment)
And then a stop sign. (see attachment)
I have tried holding down power button and restart manually 5 times - no luck. The mac is stuck, and I cannot boot.
Please help - I need to get back to work.Had the exact same problem on my Macbook Air. Apple Support had me boot with Command-R and repaired disk in Disk Utility. Everything seemed fine so they told me to reinstall, which I did. After a few hours I went back to the screen and it asked me to type in my password. After that is tries to install some more and then I get the following message:
OS X could not be installed on your computer.
This core storage operation is not allowed on a sparse logical volume group.
Quit the installer to restart your computer and try again.
Each time I try to reboot I get the same message. -
Kodak 5300 - Cannot print after Leopard install
1) Latest drivers from Kodak reinstalled
2) Get a "raster stream error" when you try to print. Any attempt at printing results in stopped jobs due to this error.
SeanMuch to my surprise, I received a reply from Kodak a mere few hours after emailing them on Sunday morning. They advised me that a new version of their all-in-one printer software (1.2.0 Release 3) for Leopard will be available on the web on Monday, October 29th.
-
My Ricoh Aficio MP 2500 only prints postscript stuff when connected to my OS X Yosemite
My Ricoh Aficio MP 2500 only prints postscript stuff when connected to my OS X Yosemite. When printing one page of something, ten pages or so of machine language will print out. It is on my home network and the IP address is correct.
Thanks for any help.This can also happen when you use a Postscript driver but the printer does not support Postscript. According to the Ricoh Australia web site the MP2500 supports PCL standard while Postscript is optional. So it would be safe to assume that you don't have the Postscript kit and that's why you are getting all those pages with Postscript commands.
One thing you can do is remove this printer from Printers & Scanners and add again, this time selecting the Generic PCL Laser printer in the Use menu. Note that this printer is set to 300dpi by default, but you can change the resolution to 600dpi via the printer menu so that you get better looking prints. -
Cannot print after downloading os7
cannot print after downloading os7
Hey snagger68,
Thanks for the question. The following article outlines steps for troubleshooting AirPrint:
AirPrint Basics
http://support.apple.com/kb/HT4356
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
1. Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
2. Is connected to the same Wi-Fi network as the iOS device.
3. Has the latest firmware version installed.
4. Has paper with enough ink or toner installed.
5. Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
Notes:
- AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
- Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.
Thanks,
Matt M. -
Bootcamp Wont Load After Yosemite Install
Loner T,
My bootcamp does not load after Yosemite install.
ThanksThis is the first part of the recovery procedure. In your case, you have two OS X versions, so standard layout is not usable.
Please install GPT Fdisk (aka gdisk) (http://sourceforge.net/projects/gptfdisk/) if you have not done so yet.
You need to use the following steps. If you see any error messages during the following steps, please stop and post back here with the error message. The following steps have values from your Testdisk output (and you can verify) in Steps 7 and 8.
Rebuild GPT5 using start/end offsets
Sudo gdisk /dev/rdisk0
P (print the full list of parts)
D (delete)
5 (part 5)
N (new part)
5 (part 5)
841717760 - Start offset in bytes (start point for Bootcamp part)
+135055353 (Size offset as opposed to End offset)
0700 (Windows part type)
P (print list of all parts just to see what changes will be made)
W (Write the new GPT)
Y (Yes! really write the new GPT)
This will delete and re-write the GPT partition info for /dev/disk0s5.
Reboot. Test that you can see the Bootcamp volume in Finder and see files in the Bootcamp volume. -
Keeps crashing after Yosemite install - Need thoughts on what to do...
My 2013 Macbook Air keeps crashing after Yosemite install, time between crashes are more random than consistent and it can be anytginh from one hour to 6 hours between crashes. Enclosed the report below with the hope that someone has some tips on what to do here.... I've formatted the computer, reinstalled the OS and checked the drive for errors and I've found nothing so far.
Would be very grateful for any thoughts/tips on what to do here...
Anonymous UUID: BEEFE0EB-6E39-4774-2F21-C8DB361123F7
Tue Oct 21 23:43:49 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff8007d7a590): "a freed zone element has been modified in zone kalloc.1024: expected 0xdb989f771eb1bbd8 but found 0x60002, bits changed 0xdb989f771eb7bbda, at offset 0 of 1024 in element 0xffffff8018915c00, cookies 0x3f0011f6db804ed8 0x5352198c01c0537"@/SourceCache/xnu/xnu-2782.1.97/osfmk/kern/zalloc.c:496
Backtrace (CPU 0), Frame : Return Address
0xffffff81102c32d0 : 0xffffff8007d3a811
0xffffff81102c3350 : 0xffffff8007d7a590
0xffffff81102c33c0 : 0xffffff8007d79c17
0xffffff81102c3400 : 0xffffff8007d78de7
0xffffff81102c3530 : 0xffffff800813160e
0xffffff81102c36d0 : 0xffffff800812aab9
0xffffff81102c3760 : 0xffffff8008140ccf
0xffffff81102c3930 : 0xffffff8007f3f2f8
0xffffff81102c3a10 : 0xffffff8007f3ea95
0xffffff81102c3b40 : 0xffffff8007f52005
0xffffff81102c3b90 : 0xffffff8007f62505
0xffffff81102c3d90 : 0xffffff8007f56d87
0xffffff81102c3f50 : 0xffffff800824dcb2
0xffffff81102c3fb0 : 0xffffff8007e3ac46
BSD process name corresponding to current thread: PhotoStreamAgent
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000007a00000
Kernel text base: 0xffffff8007c00000
__HIB text base: 0xffffff8007b00000
System model name: MacBookAir6,1 (Mac-35C1E88140C3E6CF)
System uptime in nanoseconds: 16215962667183
last loaded kext at 9812882932706: com.apple.filesystems.smbfs 3.0.0 (addr 0xffffff7f8a0e1000, size 389120)
last unloaded kext at 1736098368348: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f895e6000, size 16384)
loaded kexts:
com.apple.filesystems.smbfs 3.0.0
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AudioAUUC 1.70
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelHD5000Graphics 10.0.0
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleUSBEthernet 2.4.7
com.apple.driver.AppleHV 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AirPort.Brcm4360 900.19.8
com.apple.driver.AppleCameraInterface 5.23.0
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleIntelFramebufferAzul 10.0.0
com.apple.filesystems.autofs 3.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleTopCaseHIDEventDriver 46.2
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.IOBluetoothHIDDriver 4.3.0f10
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.iokit.IOSurface 97
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOSerialFamily 11
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.driver.AppleHSSPIHIDDriver 26.2
com.apple.driver.AppleMultitouchDriver 260.30
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.driver.AppleHSSPISupport 26.2
com.apple.driver.AppleIntelLpssSpiController 2.0.45
com.apple.driver.AppleIntelLpssDmac 2.0.45
com.apple.driver.AppleIntelLpssGspi 2.0.45
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookAir6,1, BootROM MBA61.0099.B16, 2 processors, Intel Core i7, 1.7 GHz, 8 GB, SMC 2.12f143
Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0512F, 500,28 GB
USB Device: My Passport 0824
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Air, Apple Inc., 23.6Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Messages stuck in updating after Yosemite install
Messages stuck in updating after Yosemite install. Tried re-install of Yosemite and quit messages, still unable to access.
Hi,
Go to the ~/Library/Attachments folder. (well it should be a folder).
If it is not a Folder then rename it and create a New folder with the same name.
restart Messages.
Or if you have a Time Machine backup replace the Non folder item with an Original from just before the update.
9:22 pm Saturday; January 17, 2015
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
My MacBook Pro's internal SuperDrive has stopped recognizing CDs/DVDs after Yosemite install
After upgrading to Yosemite, my MacBook Pro's (early 2011) internal SuperDrive has stopped recognizing CDs/DVDs after Yosemite install. It takes them in and will eject them with the keyboard button, but they will not mount. Disk Utility shows the SuperDrive and shows the inserted media, but will not mount the disk. That button is grayed out. Please help! I still have training libraries and music I access on such media. Thx!
UPDATE: I discovered some forum posts about a similar issue with Mavericks that recommended re-installing the system to fix the problem. I realized that I rarely restart my computer unless there's an update that requires it, and decided before undertaking a full re-install of Yosemite to simply restart my computer again. THIS WORKED! The SuperDrive is now mounting CDs and DVDs. Not sure what the issue was, but if anyone else has this issue I hope this will save you hours of frustration.
-
My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time.
I tried this, but no luck. I went to Previous System>Users. There is nothing inside the "Users" folder, so I hit a dead end.
I can find my new e-mails -- those that came in since I re-installed the system -- in my NEW system (which I did to see if I was correctly understanding the advice), by going to Users>Home>Library>Mail>POP account name>Inbox.
Let me add a new question: I am running PhotoShop C3. It opens OK, and I can use it, but when it opens I get this message: "One or more files for Adobe Application Support folder are missing. Please re-run the PhotoShop installer."
I don't like re-installing working programs if I can avoid it, because it always seems to lead to other issues. Any idea what files are missing, and where it/they might be in the Previous System folder?
thanks
Mike -
My display is non hdcp compliant after Yosemite install
My display is non hdcp compliant after Yosemite install, fix this?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Very long shutdown time after Yosemite install
After installing Yosemite my Macbookpro has shutdown times of over more than 5 minutes. This is what i got from Etrecheck.
Problem description:
very long shutdown time after yosemite install
EtreCheck version: 2.1.8 (121)
Report generated 19 Feb 2015 01:19:39 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 868
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6490M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: one day 7:40:33
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (90.86 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
LaCie LaCie Device 500,11 GB
EFI (disk2s1) <not mounted> : 210 MB
MINI DAVID HDD (disk2s2) /Volumes/MINI DAVID HDD : 499.76 GB (62.48 GB free)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Karabiner.app
[not loaded] org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) [Click for support]
/Library/Parallels/Parallels Service.app
[not loaded] com.parallels.kext.prl_hid_hook (7.0 15106.786747) [Click for support]
[not loaded] com.parallels.kext.prl_hypervisor (7.0 15106.786747) [Click for support]
[not loaded] com.parallels.kext.prl_netbridge (7.0 15106.786747) [Click for support]
[not loaded] com.parallels.kext.prl_usb_connect (7.0 15106.786747) [Click for support]
[not loaded] com.parallels.kext.prl_vnic (7.0 15106.786747) [Click for support]
/System/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (4.7.1) [Click for support]
[loaded] com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.3.0) [Click for support]
[not loaded] com.avid.driver.Avid_SCSI (1.2.0) [Click for support]
[not loaded] com.avid.driver.Avid_SCSI_RBC (1.2.0) [Click for support]
[loaded] com.cisco.kext.acsock (1.1.0 - SDK 10.2) [Click for support]
[not loaded] com.digidesign.fwfamily.driver (8.0.4f1) [Click for support]
[not loaded] com.digidesign.mbox2.boot.driver (8.0.4f1) [Click for support]
[not loaded] com.digidesign.mbox2.driver (8.0.4f1) [Click for support]
[not loaded] com.freecom.driver.BoulderScsi (1.0.0d1) [Click for support]
[not loaded] com.metakine.handsoff.driver (2.0.8 - SDK 10.6) [Click for support]
[not loaded] com.nvidia.CUDA (1.1.0) [Click for support]
[not loaded] com.paceap.kext.PACESupport (5.7.2b8) [Click for support]
[not loaded] com.paceap.kext.PACESupport2 (5.7.2b8) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.7.2b8) [Click for support]
[loaded] com.rogueamoeba.HermesAudio (3.0.1) [Click for support]
[not loaded] com.sony.filesystems.pdudf (4.03.0d006 - SDK 10.6) [Click for support]
[not loaded] com.sony.filesystems.pdudfr (4.03.0d006 - SDK 10.6) [Click for support]
[not loaded] com.sony.scsi.PDW-U1 (4.03.0d006 - SDK 10.6) [Click for support]
[not loaded] com.wacom.kext.pentablet (5.3.5 - SDK 10.9) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.7.2b8) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.7.2b8) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.7.2b8) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.7.2b8) [Click for support]
Startup Items: ℹ️
ciscod: Path: /System/Library/StartupItems/ciscod
CUDA: Path: /System/Library/StartupItems/CUDA
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
PACESupport: Path: /Library/StartupItems/PACESupport
ProTecVb: Path: /Library/StartupItems/ProTecVb
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[unknown] c om.apple.coreservices.appleevents.plist [Click for support]
[unknown] c om.apple.diskarbitrationd.plist [Click for support]
[unknown] c om.apple.mDNSResponder.plist [Click for support]
[unknown] co m.apple.securityd.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[loaded] com.cisco.anyconnect.gui.plist [Click for support]
[running] com.epson.epw.agent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.metakine.handsoff.agent.plist [Click for support]
[loaded] com.nvidia.CUDASoftwareUpdate.plist [Click for support]
[failed] com.parallels.desktop.launch.plist [Click for support]
[loaded] com.parallels.DesktopControlAgent.plist [Click for support]
[running] com.parallels.vm.prl_pcproxy.plist [Click for support]
[running] com.wacom.pentablet.plist [Click for support]
[running] net.culater.SIMBL.Agent.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[failed] com.autodesk.backburner_manager.plist [Click for support]
[running] com.autodesk.backburner_server.plist [Click for support]
[failed] com.autodesk.backburner_start.plist [Click for support]
[running] com.cisco.anyconnect.vpnagentd.plist [Click for support]
[running] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.metakine.handsoff.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[running] com.parallels.desktop.launchdaemon.plist [Click for support]
[loaded] com.rogueamoeba.hermes.plist [Click for support]
[loaded] com.rogueamoeba.instanton-agent.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
User Login Items: ℹ️
Google Chrome Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 - SDK 10.4 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
CUDA Preferences [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
PenTablet [Click for support]
XDCAM Drive Monitor [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 408.02 GB
Destinations:
Time Capsule [Local]
Total size: 799.52 GB
Total number of backups: 18
Oldest backup: 2014-11-12 02:44:18 +0000
Last backup: 2015-02-17 14:14:45 +0000
Size of backup disk: Too small
Backup size 799.52 GB < (Disk used 408.02 GB X 3)
Top Processes by CPU: ℹ️
20% mds
5% WindowServer
2% Google Chrome
1% launchd
1% prl_disp_service
Top Processes by Memory: ℹ️
515 MB Final Cut Pro
378 MB softwareupdated
309 MB Google Chrome
215 MB Google Chrome Helper
206 MB mds_stores
Virtual Memory Information: ℹ️
220 MB Free RAM
3.56 GB Active RAM
3.34 GB Inactive RAM
1.45 GB Wired RAM
7.56 GB Page-ins
4 MB Page-outs
Diagnostics Information: ℹ️
Feb 18, 2015, 04:35:18 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-163518_[redacted].crash
Feb 18, 2015, 04:29:01 PM /Library/Logs/DiagnosticReports/backburnerManager_2015-02-18-162901_[redacted]. crash
Feb 18, 2015, 04:11:30 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-161130_[redacted].crash
Feb 18, 2015, 04:04:44 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-160444_[redacted].crash
Feb 18, 2015, 01:49:37 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-134937_[redacted].crash
Feb 17, 2015, 05:36:32 PM Self test - passedPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Shut down from safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
unable to bootup after Yosemite install. have to keep shutting down from rear button. it does come on after a few times but then hangs at user login again. If you get in it is great. Seems faster than Mavericks but there is some sort of issue, bootup /login.
Knock on wood, this seems to have been my problem as well. I stumbled on this thread after dealing with this ridiculously-long boot times for the past several weeks.
I just reinstalled McAfee Antivirus and my Macbook Air booted up in less than 1 minute. No more hanging on the boot-up progress bar. No more hanging after I click on my user's avatar on the log-in screen. Bootup would often take 5+ minutes and sometimes never complete.
This has been SUPREMELY frustrating.
THANK YOU SO MUCH FOR POSTING YOUR RESPONSE!!! -
Monitors flickering badly after Yosemite Install
Monitor flickering badly after Yosemite installed
I will be awaiting upDated drivers in a release soon.
I notice is very badly when I connect my iphone to ITunes screen
goes crazy flicker. . . . Anyone else having this issue ?Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Maybe you are looking for
-
SUN Blade 2000 giving FATAL SCSI Error while booting from CDROM
Hi, SUN Blade 2000 system giving "FATAL SCSI Error at Script address 110 SCSI parity Error Arbitration Complete" while trying to boot from CDROM. Thanks in advance. Bye vijay
-
My trackpad is not working it moves the arrow but I cannot click on anything or drag anything
My trackpad is not working on my MacBook pro. I can get the arrow to move but I cannot open files or drag files when I click.
-
I am using 9ids. All reports are run from form in internet explorer. by using web.show_document(); all are working fine and reports are too running very good. now i have created a hyperlink in one report using text item,to run another report. in hype
-
MacBook Air: Will 802.11n Wi-Fi work in a 'remote' location.
Hello, could I seek some guidance from Macbook Air users? Brief Background: I live in a small town in Thailand some 320 kms south of Bangkok. This is not at the end of the world and technology is slowly catching up e.g. but no 3G here. There is Wifi
-
External file imported in flash
I need urgent help I need to import the hyperlinks from a text file into my swf file at run time can anyone help me on tht