Ricoh reader-SDHC for backup-cannot do copy and replace

I have used the Ricoh reader to back up my data partition by drag-and-drop copy to Transcend SDHC card. When I try to use drag-and-drop copy again to copy the updated data partition I get the message that there is not sufficient free space. But when I use this procedure on an external USB HDD I do not have that problem--Windows simply copies over the old file on the external HDD. Why does this not work with SDHC card in the Ricoh reader? Also, with this Class 10 SDHC card the initial backup took ages! Please advise, as I really want to use SDHC in the Ricoh reader as a backup medium.

Aryeh: I have been thinking you are probably right re lack of sufficient free space on the SDHC, such that Windows would "see" enough free room on the target drive already containing 13gb of backup data for all the info to be copied from the source drive using the copy command. I am guessing that the target drive format (NTFS vs FAT32 vs exFAT is not the problem that has prevented me from using the copy command with my 16gb SDHC. So I am going to try to do the backup of 13gb data instead with a 32gb SDHC, which would provide more than enough free space once it is populated with an initial backup comprising about 13gb of data. Will post the outcome here.

Similar Messages

  • Is it possible to retrieve a registration key for a hard copy of iWork 06? Moved and cannot locate disc, and replaced the computer it was originally installed on. When I transferred the program to new Macbook, the reg key apparently didn't transfer.

    Is it possible to retrieve a registration key for a hard copy of iWork 06? Moved and cannot locate disc, and replaced the computer it was originally installed on. When I transferred the iWork from original Macbook Pro to new Macbook Pro, the reg key apparently didn't transfer. Any ideas?

    Do you still have access to the old MacBook Pro? If so, you can transfer the license by copying the com.apple.iwork.plist from Macintosh HD > Library > Preferences to the same location on the new Mac. Note that this IS the main HD Library, not your user library. I have found that these files are not moved during setup or migration.
    Are you really running Tiger 10.4.7? If so, you should update to 10.4.11. You can find the updater here. You also might consider buying the retail disk of iWork '09 from a third-party such as Amazon.com or eBay. It will add a lot of features for you. iWork '09 does require Tiger 10.4.11 at a minimum.

  • I receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.

    I performed a clean install of Lion, then upgraded to Yosemite. Now, i am trying to restore files and programs from my backup in my time capsule but when i connect to the backup folder i receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.
    I previously had mavericks installed and was able to backup and restore just fine. I do believe that within the time since i last performed a backup or restore there was an update for the time capsule that i ran using my iPhone. I need a solution to this issue.

    Yosemite can take a very long time to index the backup.. and it seems to be impossible in my own testing to get back beyond the latest one.
    If you cannot manage a migration.. which I guess is what you are trying to do.. see if you can do a full restore to a USB drive plugged into your computer.

  • Looking for an app that I can save what I highlight when I am reading an article without having to copy and paste

    Looking for an app that I can save what I highlight when I am reading an article without having to copy and paste

    I looked at Bento and at first glance I think it would do everything I want it to do, then I saw a review or something from a customer that indicated the information in Bento could not be exported (say to send out a mailing).  I may want a program that can do that as well, is there one out there? If not it does look like Bento will work.  When you save a picture to a customer in Bento can you open it up full size?

  • I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

    I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

    No, it is not a backup method at all.  If you delete a sync'd file on any device, you delete it permanently from iCloud.  That by its very essence is not a backup solution therefore.  A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
    iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

  • Installed firefox 4 for os 10.4.11 and replaced 3.6 to find out that it's not compatible. Need to reinstall 3.6, but cannot find it.

    Installed firefox 4 for os 10.4.11 and replaced 3.6 to find out that it's not compatible. Need to reinstall 3.6, but cannot find it. Please provide where I can re-instal Firefox 3.6.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html

  • Question to CAD Desktop - Feature Copy and Replace

    Hello,
    I want two use the feature "copy and replace" in CAD Desktop to copy and replace the document info set with a new one but also change its document info set type.
    Is that in general possible, how to customize it?
    Kind regards,
    Axel Tackenberg

    Hi,
    here the link to the docu:
    http://help.sap.com/erp2005_ehp_04/helpdata/en/ea/56e93ba948ca1ee10000000a114084/frameset.htm -> Processing of doscuments - > Copy and Replace.
    Best regards,
    Martin

  • Cannot use copy and paste function in PSE10?

    Today i went to copy and then paste an image onto another one,i could not use the copy or paste function(in pse 10). Only the paste function was usable  and when i hit it it pasted the picture of an eagle onto the image. This eagle i had copied from a particular website(unrelated to photoshop) amd pasted it to a folder in windows live photo gallery. I tried deleting this eagle from the windows gallery,but still i could paste the eagle onto the other picture.  And it created another layer with the picture of the eagle.This is very strange. How can this be corrected. Also as usual my lassoo tool is malfunctioning in pse 10?  Maybe uninstalling  and re-installing pse 10 would solve the problem  and if so can you give me instructions on how to do this safely or refer me to a link.  Would appreciate a quick reply. Thanks!!

    Thanks Barbara for your help  and your nice explanation as to how the copy and paste function works. Never had a problem before but now it functions normally!
    Irwin Lakin
    <mailto:[email protected]> [email protected]
    508-866-4250

  • Shortcut-Bug in Bridge CS6 for Mac / Bridge cant' copy and paste metadata

    The cmd-keys / shortcuts doesn't work in the file info panel btw. in the xmp / iptc fields (e.g. cmd+c, cmd+v, ...) of Adobe Bridge CS6 (Mac OS 10.6.8 and 10.7.3). You are not able to cut and paste info from one box to another like previous versions.
    This bug only appears in the file info window (opened via alt+i) in Bridge CS6 - if you edit information or metadata in the file info panel in Photoshop CS6, the shortcuts or copy and paste from one field to another works.
    The shortcuts also work under Windows (tested under Vista).
    I noticed this minor bug already one in the Photoshop CS6 Beta more than one months ago. I hoped that this was corrected in the official test version, but unfortunately it is not. Although it is a minor bug, it is IMHO a basic function and would be very helpful in my daily work. Bridge CS6 and ACR 7 are very good and meet my expect ions or needs - it is too bad, that such a small thing is making working with the application a little bit annoying.
    It would be nice, if you could forward this to Adobe engineers that they can fix it.
    Thanks so much!

    Thanks! If there is a workaround or simple solution, I would be very glad if you could inform me.
    Christian
    (signature removed by the Admin)
    Am 14.05.2012 um 13:49 schrieb FrankBiederich:
    Re: Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata
    created by FrankBiederich in XMP SDK - View the full discussion
    Thanks for your report; we'll look into it.
    Frank
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata
    To unsubscribe from this thread, please visit the message page at Re: Bridge CS6 Mac XMP File Info Panel Bug: can't copy and paste metadata. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in XMP SDK by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
    Message was edited by: Arpit Kapoor

  • Envy 17-j020us, cannot cut/copy and paste within file explorer

    I can cut/copy and paste url's and text from word, etc, but I am unable to cut/copy and paste files within file explorer windows. I have tried running malwarebytes and virus programs. HP support has tried remote access to find the problem unsuccessfully. Is there any other option besides doing a factory reset or restore point? Thanks in advance for any help.
    This question was solved.
    View Solution.

    Hi jdavis33811,
    Have you tried all three methods of cutting and pasting? Using the keyboard shortcuts CRTL-X and CTRL-V, right click the file and selecting cut and then using the file explorer ribbon / File menu.
    If you have tried all three the next thing to try is a Clean Boot to see if something is in the background blocking the command. A clean boot loads Windows with minimal software and drivers. This Microsoft Support link will show you how to do it.
    Once you have performed the clean boot try all three methods of cutting and pasting. If it works the next step is going back to msconfig (see Microsoft link above) and enable half of the services you shutoff to do the Clean Boot. Then try cutting and pasting again. Keep enabling half of the remaining services until you can't cut and paste then disable half of the services you just enabled. Do this until you pinpoint what service caused the issue.
    If after all that you are still having a problem then the next step would backing up your files onto an external hard drive or USB flash drive and then doing a full System Recovery.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • How to copy and replace new Mountain Lion hard drive with old Snow Leopard drive?

    So far I have not found an answer to my question, so I am hoping that this is feasible.
    A while ago I purchased a used 2010 Macbook Pro running Snow Leopard that did not have the installer disc. A week ago the hardware died on me, so I replaced it with a new 2012 Macbook Pro running Mountain Lion.
    The problem is that I purchased a 1 TB aftermarket HD for my old Macbook Pro and want to replace the current smaller hard drive in my new computer with it. I've already run Time Machine and put all of my data in my new computer so I figured that it would be possible to simply copy that disk image back over to my old drive and replace it. However the computer showed that they weren't compatible. When I tried to put my old hard drive in my new computer there was not a bootable OSX available.
    Since Mountain Lion already came on my new computer I do not have an installer that I can use.
    Is there anyway I can copy the current Mountain Lion information from my new hard drive and basically have a fully functioning, bootable copy on my old hard drive that I can put back into my new computer?
    Thank you.

    Well, if you put the HDD from the old Mac into an external enclosure you can use a tool like Carbon Copy Cloner or SuperDuper! to clone the Mountain Lion installation onto the 1TB drive.  If you go this route, I would suggest you consider using CCC as it does have the option to clone the Repair Partition as well as the boot volume.
    Another route you could take would be to put the 1TB drive into the new MBP, and then boot to the Internet Recover .  From there you can re-partition the drive and install Mountain Lion clean on the 1TB drive.  During the installation process, you will have the option to use the Migration Assistant to migrate your data & apps.  You can use your Time Machine backup for that, or if you have the original drive in an enclosure, you can migrate directly from the external drive.  I have used this latter method myself a few times.

  • Want to remove the email address for renewing of 2 apps - and replace it with my email address

    Want to remove the email address for renewal of 2 apps on my iPhone and replace it with my current email - how can I do this???

    Changing the email address you use for your Apple ID -
    http://support.apple.com/kb/HT5621

  • Firefox for Android: cannot locate server and the URL trying to reach includes a colon character

    Trying to reach a URL like this: http://myserver123:1009/home.aspx
    I've already disabled the firefox adding the "www" and ".com" to the URL which was definitely an issue originally, but it still does not resolve properly.
    The error page says:
    "Server not found. Firefox cannot find the server at myserver123"
    It seems Firefox is stopping at the colon character in the URL, thus not resolving to the page.
    Any ideas on how to fix?

    Hi LI_NY_1
    On my Nexus 6, running Lollipop and FF 37.0.1 I have no problem reaching urls like:
    http://rt-mba11:8080/index.html
    Are you sure you have your webserver for myserver123 configured correctly?
    If you could give me the URL of your webserver I can try to see if I can reproduce this problem; my guess is this is a webserver config issue and not a Firefox for Android issue but of course I could be wrong!
    Cheers!
    ...Roland

  • Icloud is asking for my pw for backup - both Apple Id and pw and have changed and they are not asking for my new?

    Received an email from Apple concerning my AOL email not being valid
    after March 31 and instructions how to convert to another active email
    address - new apple id and pw updated yesterday.  Now when I go
    on my iphone, icloud asks me for pw to old aol email ID - which I have
    forgotten - but that is not now the current Apple Id for my ITunes account.
    Not sure how to change it on my phone - when I try to sign out of icloud
    so I can go back in and re-enter info, it asks for pw to shut off find my
    iphone and I have forgotten the pw. Thanks for any help!

    Hello there RmCrCo,
    it sounds like you need to reset the password for the account you have signed in on your phone you should be able to get that reset wiht this article:
    iCloud: Change your iCloud password
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Third party utility to allow "copy-and-merge" instead of "copy-and-replace"

    I'm looking for a utility that can allow me to copy folders and files over existing ones, and have them merge instead of replacing everything. Where can I find one?

    You can use FileMerge:
    install the Developer tools from the Leopard DVD,
    then go to this folder:
    /Developer/Applications/Utilities

Maybe you are looking for