Ridc query for list of WebSites

I am just starting with RIDC and with UCM, developing a web app to allow access to UCM via IDC. I need to get back data for presenting lists to my users, like: list of websites maintained by UCM, list of sections within particular websites, etc. I am baffled and would appreciate tips as to service to use (GET_SEARCH_RESULTS ??) and parameters which need to go into the DataBinder to use with the service. At this point I can do simple queries to find content, but not much more.

Hi.
To filter Site Studio Sites in UCM you have tu execute GET_SEARCH_RESULTS filtering by: xWebsiteObjectType <matches> `Project`.
You'll obtain the list of Site Studio Sites :).
PD: It's a WebCenter Content Post not WebCente Portal ;).

Similar Messages

  • Query for listing several values in same field

    Hi,
    is there a function for listing more than one value in the same field, only with comma seperation?
    For example, I want to group by cardcode from ORDR and list all docnum's like this:
    Cardcode    Docnum's
    21355          98765, 95498, 95164
    21564          95484, 54684, 95654, 98465
    21865          95484, 12486
    Kind regards
    Kjetil Sandvik

    HI,
    Thank for your replies.
    We need to update all old orders for sure, but my idea was to use this query:
    Select CardCode, COUNT(Address2) From ORDR Where Docstatus <> 'C' GROUP BY address2, cardcode order by cardcode, address2
    The results will give me two lines for each customer and count the addresses, so then I know that the count of one of the lines must me changed. Let's say there is 20 orders with new address and 20 orders with old address, my intention was to manually change the 20 orders that is old. Instead of checking all 40, It would help alot to list all order numbers in a column beside in the query.
    BR
    Kjetil

  • RIDC Query for Date

    Hi,
    Could anyone please help me out in creating RIDC query similar to the below query in SQL
    SELECT id FROM Table_name WHERE MONTH(released_date) = 2 AND YEAR(released_date) = 2013
    Thanks in advance.

    You should be able to use the Query Builder search form within WebCenter Content to help you generate the correct syntax.
    Also, this blog post may be of some help: http://jonathanhult.com/blog/2012/12/ridc-examples/
    Jonathan
    http://jonathanhult.com

  • Query for list of supported auth mechanisms

    Is there a way to query a BO server for a list of supported authentication mechanisms such as secEnterprise or trusted secret or secWinAD, etc?

    I haven't tested but this should work:
    InfoObject oIfoObject = (IInfoObject) oInfoStore.query("select si_id from ci_systemobjects where si_name='Auth Plugins'").get(0);
    IInfoObjects authPlugins = oInfoStore.query("select * from ci_systemobjects where si_parentid=" + oInfoObject.getID());
    for(int i=0; i<authPlugins.size(); i++)
           IInfoObject authPlugin = (IInfoObject) authPlugins.get(i);
           // above returns a specific plugin object: secLDAP, secWinAD, secSAPR3, secEnterprise all what your installation supports
    //  cast the InfoObject to IsecWinAD if si_kind=' secWinAD' or si_name is secWinAD
    if(authPlugin.getTitle().equalsIgnoreCase("secWinAD"))
                  IsecWinAD winad = (IsecWinAD) authPlugin;
                  int availability =  winad.getAvailaility(); //0 - if plugin is not configured\ready to use, 1 if ready to use and configured.
                  String enabled =winad.properties().getProperty("SI_TRUSTED_AUTH_ENABLED").getValue().toString(); // returns true if trusted aut is enabled for this plugin, false otherwise.
    I don't think you can read any property to retrieve the trusted key. The above code will give the auth plugins that are available in your install, which ones are ready and configured ( I have checked only the AD ones above) and if trusted auth is enabled. Check query builder properties if you are trying to get additional info for the auth plugins.

  • Query for list of specifications

    Hi Experts,
    We need to execute query which should contain list of specifications with and without material assignments.Selection criteria is based on generation variant.
    Please let us know from which tables we can get the above list.
    Thanks for your help!!
    Regards,
    Sivasankar
    Message was edited by: Sivasankar P
    Message was edited by: Sivasankar P

    Hi Chris,
    This issue is not related to consultant and it is related to end user. We have query which is already defined to pick up specifications with material.Now they have requested us to get the query even there is no material assigned to specifications.
    So we have planned to remove material from query, so if we remove ESTMJ from query whether it will have impact on some other tables.(like ESTDJ,ESTRH,ESDTH,etc..)
    Thanks for your help!!
    Query:
    *delete report if there is no material
    SORT I_ESTRH BY RECNROOT.
       SORT I_ESTMJ BY RECNROOT.
       IF I_ZESTRHESTDJESTDH[] IS NOT INITIAL OR
          I_ZESTRHESTDJESTDH1[] IS NOT INITIAL.
         LOOP AT I_ESTRH INTO WA_ESTRH.
           MOVE SY-TABIX TO V_INDEX.
           READ TABLE I_ESTMJ INTO WA_ESTMJ WITH KEY RECNROOT = WA_ESTRH-RECNROOT
                                                                   BINARY SEARCH.
           IF SY-SUBRC NE 0.
             READ TABLE I_ZESTRHESTDJESTDH WITH KEY SUBID_ESTRH = WA_ESTRH-SUBID
                                                                  BINARY SEARCH.
             IF SY-SUBRC NE 0.
               READ TABLE I_ZESTRHESTDJESTDH WITH KEY SUBID = WA_ESTRH-SUBID
                                                              BINARY SEARCH.
               IF SY-SUBRC NE 0.
                 READ TABLE I_ZESTRHESTDJESTDH1 WITH KEY SUBID = WA_ESTRH-SUBID
                                                                 BINARY SEARCH.
                 IF SY-SUBRC NE 0.
                   READ TABLE I_ZESTRHESTDJESTDH1 WITH KEY SUBID_ESTRH = WA_ESTRH-SUBID
                                                                         BINARY SEARCH.
                   IF SY-SUBRC NE 0.
                     DELETE I_ESTRH INDEX V_INDEX.
                   ENDIF.
                 ENDIF.
               ENDIF.
             ENDIF.
           ENDIF.
         ENDLOOP.
       ENDIF.
    Regards,
    Sivasankar

  • Query for list of tables

    Hi Gurus,
    I have a requirement, i have one server on which i have got 20 DB and now i want to list those 20 DB and the count of total tables on each DB and the last login date on each DB. How can i do that? i was trying the below one but in vain.
    EXEC sp_databases;
    can you please provide your inputs for this.
    Thanks,
    RM

    Then I am speechless.
    In Oracle, for the table counts:
    select owner, count(*) from dba_tables group by owner;For last login date you need to enable auditing to track something like that.
    For SQL Server databases you should go here :
    http://social.msdn.microsoft.com/Forums/en/category/sqlserver
    Good luck!

  • TDS Amount on Vendor Advance Shows positive value in *QUERY* for TDS Report

    Hi Everybody,
    I have made a query for List of TDS Report with Vendor informations as required by my client. In which the value of TDS on Vendor Advance Payment appears as positive value instaead of negative value. Please suggest how to rectify.
    Thanks,
    Paul

    Dear,
    If you have cleared the advance in F-54, then this will reverse the tax amount. That could be the reason for tax amount in debit.

  • ABAP Query, To list both, the PO created and PO modified for a given period

    Hi
    I want to create a query that list the purchasing orders created or modified during a given period. however, the creation date and the modification date are two different fields stored in differents tables.
    if I have these two fields in the selection creteria screen, the relationship between them will be the operator AND. so this will not enable me to have the information targeted.
    My quetion, is there a possibility to have the Operator OR in the first selection creteria screen , between these 2 fields.?
    the tables are:
    for the creation EKKO
    for the change :
    MECDGRID
    CDHDR Change document header
    CDPOS Change document items
    thanks

    Hello,
    Fetch data from EKKO and do a for all entries on the table CDHDR on the field OBJECTID and EBELN and t-code = ME21N OR ME21 ETC.
    Similarly between CDHDR and CDPOS tables based on objectid`s.
    Hope this helps you in solving your problem!
    Regards,
    Reetesh

  • How do I create an email list sign up form for my iWeb website?

    Well that's the question - how do I create an email list sign up form for my iWeb website?
    Could someone tell me what's the simplest way using iWeb to create an interactive option
    for users to enter their email address and the info be forwarded to me so I can add to an
    email list?
    It would be great if, since I'm using a Mac computer & iWeb, there was a way to have the
    submitted emails automatically added to a group in my Mac Addressbook.
    I got this MacBook Pro in Sept 2010 so I believe that's iWeb '08 I'm using.
    Anyway I'm thinking there should be a way to do this with some system involving an HTMK
    Widget and an email account.
    By the way this is for hosting through a 'real server', not MobileMe (which I plan to get later
    when I can afford it).
    Any help or suggestions would be appreciated.
    Mark

    Website forms require some code in a snippet and a formmail.php script on the server to process the form and send the info to the required email address. You can do all this when you switch to a "real" server.
    In the meantime you can use a form  or marketing service or, better still, an application like MailShoot which generates the form, handles the database and sends out the bulk emails.
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Problem writing a sql query for a select list based on a static LOV

    Hi,
    I have the following table...
    VALIDATIONS
    ID          Number     (PK)
    APP_ID          Number     
    REQUESTED     Date          
    APPROVED     Date          
    VALID_TIL     Date
    DEPT_ID          Number     (FK)
    I have a search form with the following field item variables...
    P11_DEPT_ID (select list based on dynamic LOV from depts table)
    P11_VALID (select list based on static Yes/No LOV)
    A report on the columns of the Validations table is shown based on the values in the search form. So far, my sql query for the report is...
    SELECT v.APP_ID,
    v.REQUESTED,
    v.APPROVED,
    v.VALID_TIL,
    d.DEPT
    FROM DEPTS d, VALIDATIONS v
    WHERE d.DEPT_ID = v.DEPT_ID(+)
    AND (d.DEPT_ID = :P11_DEPT_ID OR :P11_DEPT_ID = -1)
    This query works so far. My problem is that I don't know how to do a search based on the P11_VALID item - if 'yes' is selected, then the VALID_TIL date is still valid. If 'no' is selected then the VALID_TIL date has passed.
    Can anyone help me to extend my query to include this situation?
    Thanks.

    Hello !
    Let's have a look at my example:create table test
    id        number
    ,valid_til date
    insert into test values( 1, sysdate-3 );
    insert into test values( 2, sysdate-2 );
    insert into test values( 3, sysdate-1 );
    insert into test values( 4, sysdate );
    insert into test values( 5, sysdate+1 );
    insert into test values( 6, sysdate+2 );
    commit;
    select * from test;
    def til=yes
    select *
      from test
      where decode(sign(trunc(valid_til)-trunc(sysdate)),1,1,0,1,-1)
           =decode('&til','yes',1,-1);
    def til=no
    select *                                                                               
      from test                                                                            
      where decode(sign(trunc(valid_til)-trunc(sysdate)),1,1,0,1,-1)
           =decode('&til','yes',1,-1);  
    drop table test;  It's working fine, I've tested it.
    The above changes to my first idea I did because of time portion of the DATE datatype in Oracle and therefore the wrong result for today.
    For understandings:
    1.) TRUNC removes the time part of DATE
    2.) The difference of to date-values is the number of days between.
    3.) SIGN is the mathematical function and gives -1,0 or +1 according to an negative, zero or positiv argument.
    4.) DECODE is like an IF.
    Inspect your LOV for the returning values. According to my example they shoul be 'yes' and 'no'. If your values are different, you may have to modify the DECODE.
    Good luck,
    Heinz

  • SQL query to list the "Administrative category" field for all applications

    yesterday i started a thread to list the "Optional reference" field for all cm applications in a SSRS report. I've got the query with the help of Torsten.
    https://social.technet.microsoft.com/Forums/en-US/00419e6e-e3c2-4b80-b6af-2a24ced1032d/sql-query-to-list-the-optional-reference-field-of-all-packages-in-cm-2012?forum=configmanagersdk
    But again today, i'm looking for a way to get "Administrative category" field in a SSRS report. Could someone point me to the right direction ?
    Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

    Hi,
    You could monitor the SMSProv.log when you check the category of an application. It shows that SQL query the SCCM provider used is related to function fn_ListCategoryInstances.
    Best Regards,
    Joyce

  • Query for price list

    Experts,
    Can you please tell me what will be the query for
    for all prices which are u201C0u201D empty  (products)
    Thanks a lot in advance

    Thanks a lot Rahul and Gordon
    I am trying like as per the need
    SELECT T0.ItemCode, T0.ItemName, T0.ItmsGrpCod, T2.ListNum, T2.ListName,
    Sum (T1.[Price]) FROM OITM T0 INNER JOIN ITM1 T1 ON T0.ItemCode = T1.ItemCode INNER
    JOIN OPLN T2 ON T1.PriceList = T2.ListNum GROUP BY  T0.[ItemCode] HAVING Sum (T1.[Price]) <=0
    But error comes like
    1). [Microsoft][SQL Native Client][SQL Server]Column 'OITM.ItemCode' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause. 2). [Microsoft][SQL Native Client][SQL Server]Statement 'Received Alerts' (OAIB) (s) could not be prepared.
    Please Help

  • Sql query to list menus, submenus and function-names for all resp

    Hi,
    Please let me know one single sql query to list all the menus, submenus and user-function-names attached for all responsibilities
    Thanks...

    Hi,
    See the following threads.
    How to find All The Responsibilities with a specific Menu
    How to find All The Responsibilities with a specific Menu
    SQL query
    SQL query
    Regards,
    Hussein

  • An EUL query to list out All the Columns  (Fileds) for each Workbook

    Hi,
    I'm using Discoverer 10.1.2.2 on an Oracle 9.2.0.6.
    Does anyone have the EUL query that lists out all the names of Workbook/Worksheets and the names of their fields/columns. I would greatly appreciate it.
    Thanks

    Hi
    While it is not possible to read the workbook itself, whenever Discoverer runs a worksheet so long as you have enabled the gathering of statistics then a row is written to the EUL5_QPP_STATS table. In that table the column called DOC_NAME is the workbook, the column called DOC_DETAILS is the worksheet, with the CREATED_DATE being the date the worksheet was run. There are other encrypted columns in that table that contain the EUL items that were queried.
    Look at this code:
    SELECT
    QS.QS_DOC_OWNER    USER_NAME,
    QS.QS_DOC_NAME     WORKBOOK,
    QS.QS_DOC_DETAILS  WORKSHEET,
    TRUNC(QS.QS_CREATED_DATE) DOC_DATE,
    *(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 ITEMS,*
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),1,  6)) ITEM1,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),10, 6)) ITEM2,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),19, 6)) ITEM3,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),28, 6)) ITEM4,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),37, 6)) ITEM5,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),46, 6)) ITEM6,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),55, 6)) ITEM7,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),64, 6)) ITEM8,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),73, 6)) ITEM9,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),82, 6)) ITEM10,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),91, 6)) ITEM11,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),100,6)) ITEM12,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),109,6)) ITEM13,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),118,6)) ITEM14,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),127,6)) ITEM15,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),136,6)) ITEM16,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),145,6)) ITEM17,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),154,6)) ITEM18,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),163,6)) ITEM19,
    EUL5_GET_ITEM(SUBSTR(EUL5_GET_ITEM_NAME(QS.QS_ID),172,6)) ITEM20
    FROM
    EUL5_QPP_STATS QS--,
    --   APPS.FND_USER          USR
    WHERE
    --   QS.QS_DOC_OWNER = '#' || USR.USER_ID AND
    *(LENGTH(TO_CHAR(EUL5_GET_ITEM_NAME(QS.QS_ID)))+1)/9 < 21*
    AND QS.QS_CREATED_DATE > '01-JAN-2009';
    In order to run this you must have run the EUL5.SQL when connected as the owner of the EUL. This script can be found in the $ORACLE_HOME\Discoverer\Util folder of the machine where the Discoverer Administrator tool is installed.
    Try it out for yourself and you will see how it works.
    Best wishes
    Michael

  • Export to Excel is not working for List View Web Part after filtering using Query String parameters in SharePoint 2010

    Hi, 
    I am filtering SharePoint list view web part based on Query string parameter and I am doing Export to Excel by using following code.
    <a href="#" onclick="javascript:window.location='../_vti_bin/owssvr.dll?CS=109&Using=_layouts/query.iqy&List=0DC67399-BE11-48F3-ADFC-E911FB8B5845&View=54671412-3EFE-4281-835A-9EF747AE774E&CacheControl=1'"><img
    alt="Excel" src="/_layouts/images/icxlsx.gif" border="0"/>&nbsp;Export to Excel</a>
    Issue: Able to do Export to Excel when there are no filters applied on list view web part but if applied filters on web part and do export to excel , only header fields are displaying in the excel sheet.
    I don't know why owssvr.dll is behaving like that .
    Please share your ideas.
    Thanks in Advance.

    Hi,
    According to your post, my understanding is that you wanted to create hyperlink to export to excel.
    The URL to execute the export is as follows:
    {Site URL}/_vti_bin/owssvr.dll?CS=109&Using=_layouts/query.iqy&List={List GUID}&View={View GUID}&CacheControl=1
    After getting the GUID, you  need to “decode” the list GUID.
    Replace %7B with {
    Replace %2D with –
    Replace %7D with }
    More information:
    Create Link to Export Library Contents to Excel
    SharePoint - Create a link to export to Excel
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

Maybe you are looking for