Right Angle 90-degree Power Adapter Connector Converter for TOSHIBA Qosmio X875-Q7290

Hello, I am having problems with my power connector not staying in it's socket allready!!The laptop is on a small table and the laptop is only used a few times a week!Is there a Right Angle 90-degree Power Adapter Connector Converter for TOSHIBA Qosmio X875-Q7290?I think this would help solve the problem. Thank You

Get an aftermarket universal charger, perhaps? Their connectors are mostly right-angle. I have some iGo Green model that looks like this but is an older model. http://www.newegg.com/Product/Product.aspx?Item=N82E16834993922

Similar Messages

Anybody know what power adapter I need for a trip to Vietnam? iPhone/iPad.

Anybody know what power adapter I need for a trip to Vietnam? iPhone/iPad.

The Apple power supplies work at from115 to 240 volts. The only adpator you need is the little plug that converts our flat pins to the ones use in Vietnam. The last time I needs one for my trip to Israel I went to Ace Hardware and they help me find exactly what I needed.
Allan

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

Provided the computer-end fits, you are free to use one with a HIGHER Wattage rating. No damage whatsoever will be done to any component, but it will likely run cooler (but may be slightly heavier).
If you use one with too LOW a Wattage rating, you will not be able to charge and run at the same time, and your computer's top speed (for its most intensive computations) will be limited.

Qosmio X500: power adapter stopped working for no reason

Hi,
Now i have my Qosmio X500 for a year and i like it, however i have small problems with it, and i would like to know if it can be problematic.
The first thing is that my power adapter stopped working for no reason,
So i bought a new one, but it always made some noise when the laptop was fully charged.
I know people with the same laptop and their adapter didn't make that sizzling noise, it looks like it was already defect from the begin.
Then i have one dead pixel in the middle of my screen, no problem for me.
Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...
Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
So all those problems i have annoy me, especially the last one (webcam and speakers problem), can this fit in the warranty of the laptop? I did extend the warranty for one year...
Thanks in advance.

> The first thing is that my power adapter stopped working for no reason,
> So i bought a new one, but it always made some noise when the laptop was fully charged.
I think this is AC adaptor fault maybe a broken cable or something like that I would recommend you to replace this get in contact with the dealer and ask for the new one.
> Then i have one dead pixel in the middle of my screen, no problem for me.
I found a info about such issues:
+Information on screen technology and pixel failure tolerance for LCD displays
+http://aps2.toshiba-tro.de/kb0/TSB9502LZ0000R02.htm
> Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
Maybe you should ask Toshiba notebook technicians for a check maybe some screws or the hinges are loose.
The speakers should be checked with connected headphones. If you will not notice the same crackling sound using headphones, then the issue might be related to speakers

Ac adapter or converter for EU Mac Mini in the US?

Hey everyone
I live in Europe and plan to move to the US soon
I have a Mac Mini which I plan to bring with me
Do I need a step down converter or will a simple adapter like that (http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro?fnode=5a) will do, as from what I've read, the Mac Mini used 85W as well
Appericate your opinions, thanks

Yes, but I would get a power cords instead of an adapter.
see > Apple Mac Mini 2010 2011 2012 White 2 Prong AC Power Cord Cable
and /or > Apple Mac Mini (Newer 2010 & 2011 Models) AC Power Adapter Cord

Adapter or converter for europe

Do I just need a power adapter plug or a full power converter for European travel?

And it works from 50-60Hz power.
 Cheers, Tom

Do i versal adapter travel converter for my ipad

help me please! if travel to oversea Thailand do I need use a universal adapter travel voltage converter for my iphone s & ipad air

You are most welcome

Please recommend a right-angled PCI-e 16x riser card/cable for a Media Live

The IGP in my Media Live is not running properly, or nVidia's drivers for it are just crap (more likely, I guess), so I need to fit a dedicated video card. The riser fitted for the supplied Hauppage WinTV card is for a PCI slot... I have Aero turned off, which ameliorates teh problem but some windows/applications still don't render properly.
I am having trouble finding a suitable riser card for a PCI-e 16x slot though. The main problem is that the 16x slot is not directly underneath the mounting points for the riser card, which means I need a riser with a flexible cable. Secondly it needs to be right angled and thirdly the slot needs to lie lower than the mounting holes. Most every riser card I've seen has the slot level with or above the mounting holes, however this would not work in the Media Live case.
In a pinch, I guess I could live with a PCI graphics card... but are there ANY modern PCI graphics cards????
So is there a recommended riser card I should use, or am I stuck?

CPU in and running fine. No issues so far, although I haven't run it under load yet.
My Titan heatsink was a tricky fit, the heatpipes are literally touching the RAM heatsinks (though not pressing against them) and the holes in the motherboard were on the large side. Installation instructions were ok but parts bags mislabled! And the supplied thermal paste was horrible... still, it really is a low profile heatsink and one rated to 130Ws - unlike just about every other one out there! The fan I fitted is a Scythe Gentle Typhoon 92mm unit and is really quiet! I hadn't realised just how noisy the original machine was, but with the Typhoon and the Silverstone PSU fitted it is genuinely quiet. Lastly, unlike the GT64 fitted before, it's fins go sideways, not front/backwards, and that means air coming off the heatsink will now go over the heatsink on the NB...
Speaking of which, I discovered the NB heatsink was rather loosely fitted. I'm going to score an aftermarket one with a bigger sink and *maybe* a fan and fit that soon. With proper thermal paste.
Lastly, since they were mentioned as a potential problem, I took a pic of what I think are the VRMs?
If I'm right, I can readily fit a heatsink to those if it would help.
With 8GBs of RAM and a 600GB Velociraptor coming, I am going to do a new windows build soon with 64bit Ultimate. After that, all I have to do is source a slot-load BR drive and the upgrades will be done. Modding the case will be another job...

The USB Power Adapter NOT working for 3rd Gen iPod touch!?

Hi Apple dudes
Well.. Look here:
http://store.apple.com/dk/product/MB051ZM/A?fnode=MTY1NDA4NA&mco=MTEyNjA0NTg
As you can see, the iPod Touch 3rd Gen (I got 32 GB, 3rd Gen) isn't listed as a compitable device.. So now I don't know whether to believe the text or the compitable list.. I really don't wanna wasted an already outrageous price on a simple thing like a adapter - And really, what's up with you NOT being able to charge your iPod from a regular USB power adaptar - NOOOOO, it HAS to be the APPLE-MADE one, cause it's soooo white.. Yes, I'm frustrated, 'cause my first time with an Apple product hasn't just been as your slogan says: "It just works!".. Nop.. Problems, confusing software, and you wouldn't even let me now that my username was already taken when I creted this account. Come on... Took me several "Create now" and Browser-switching to figure it out..
Sorry for this aggresive ending, I hope you can help me with my problem after all
Regards
Alexander
Message was edited by: AlexPPPPPPP

Alex:
Welcome to the  forums!
I can't help you with things like user names. Apple handles that; I'm an Mac/iPod user, not an Apple employee.
Tech specs for the unit you have can be found here: http://www.apple.com/ipodtouch/specs.html. And, based on the back view (4th image) on the page you listed, I'd say you could use it for your iPod, because you should have the USB charge-cable that came with the iPod. (The one that plugs into the computer, and hence, into the back of the charger.)
However, I'm not an expert in European iPods, being American.
As for software...Apple software, if you're used to using Windows, takes time to get used to. I'm still finding things out, and I switched a year ago. It takes a little time.
Best of luck--
Doc

Can Macbook(2007 late) 60W MagSafe Power Adapter be used for New Macbook Air 13" ?

I just upgrade my old Macbook (2007 late) to the new Macbook Air 13" (2012 Mid).
The old Macbook have a 60W Magsafe power adaptor, it's T style.
I am wondering if this kind of old T style 60W magsafe adaptor can be used on my new Macbook Air which is using magsafe 2, if I just purchace a "magsafe to magsafe 2 converter" on the Apple Store?
Can anybody share your experience?

Thanks captfred's reply.
I go to Apple reseller to get the "Magsafe to Magsafe 2 converter" and test it with my old T-style 60W adaptor.
So far, my new Macbook Air is still working.
Hope my experience can help other user.
BTW, I don't know how to change "This helped me" to "This solved my question".
So, sorry captfred, I can't add your point.

HT1635 where can I get the power adapter for MC207xx/A . It's a 60W "T" connector

where can I get the power adapter for
MC207xx/A . It's a 60W "T" connector

You can get a new third party 60W power adapter on eBay for under $20.
http://www.ebay.com/sch/i.html?_nkw=macbook+power+adapter&_sacat=0&_sop=12&_dmpt =Apple_Laptops&_odkw=macbook+power+adapter&_osacat=111422&_trksid=p3286.c0.m270. l1313
Or for $80 from Apple http://store.apple.com/us/product/MC461LL/A

My USB Port Beside Power Adapter Plug In Doesnt Work?

Awhile ago the usb port that is right beside where the power adapter goes in stopped working which makes it hard to things as Im using an external keyboard in the other one. ANy ideas?

Surfgod wrote:
Awhile ago the usb port that is right beside where the power adapter goes in stopped working which makes it hard to things as Im using an external keyboard in the other one. ANy ideas?
Go to Apple Menu>About This Mac>More Info>USB
Check if your "USB High Speed Bus" is active. If it is, you probably have an issue with a USB cord or something.
If it is not active, you might have a motherboard problem. That needs to go to Apple for repair.

Airport Express Two Prong Power Adapter

Can the two prong power module be replaced with an extension cord from an Apple PowerBook AC Power Adapter? I'm thinking that there may be a situation where I would like to relocate the Airport Express away from the AC outlet, and perhaps closer to an ethernet port in a hotel room.
Anyone actually do this? I don't want to fry the Airport Express, and i don't want to lug around an regular AC power extension cord.

Henry,
Can you tell me if the reverse is true? Would the AC extension cord sold along with the AirPort Express stereo cables package -- in the UK store, at least -- be properly rated to work with the iBook AC power adapter? It looks like the piece of equipment I need, but I can't find anything in the tech specs to reassure me that it would work safely on my power adapter.
Context for my question: I have moved from the US to the UK and want very badly to get an AC power cord with a UK plug to replace the one with the US plug. (I have the snap-on UK plug, but want the cord so I can sit farther from the wall.) It would cost 55 GBP to buy an "extra portable power adapter" (the whole unit, including the snap-on cord I want); by contrast, it would cost only 29 GBP to buy the "AirPort Express Stereo Connection Kit with Monster Cables," which includes "an AirPort Express power extension cord." I might actually use the AirPort Express stereo connectors if I had them, but I have no use for an extra AC adapter (and I hope not to need one!).

Apple Cinema Display & Power Adapter

I just picked up a new 23" ACD, got it hooked up to my MBP. I had the power adapter box standing vertically on my desk. Anyways, While I was working on organizing the cables, SLAM!, the power adaper box tipped over onto the desk. now sitting horizontally from the 90 degree tip. Do I have anything to worry about such as internal damage to the power adapter?
Also, how come the manual said not to carry the display by the stand? But it just make more sense carrying the display by the stand, this way not having the screen itself lift that heavy-weight stand.
MacBook Pro - 15.4" Glossy , Intel Core 2 Duo 2.33GHz, 2GB RAM, 120GB HD Mac OS X (10.4.8)

My desk top is made of wood board, so it can echoes major sound from just small impact. The power adapter was standing vertically, then tips and lays flat horizontally. Sort of like a iPod tips over when it's not correctly connected into the dock.
I just shook power adapter to hear for any sound of any internal components broken off. Turned out no sound but a tiny bit of stiff rattling. Though it's still function, I'm still paranoid and worried.
As for carrying the ACD, Dave you made a good point, I dont really think it'll hurt if holding it by the stand upright position, which I did. The manual probably meant not to hold it by the stand upside down or in a 90 degress position, which increases the chance of the screen knock into something. The stand secures the screen and it's designed to hold the weight of the screen, I don't see why carrying this display by the stand in a upright position will be a issue.

Adapter or converter in Japan?

I am going to be studying abroad in Japan for 11 months. I would like to know if I need to buy an adapter or converter for my Macbook Pro.

You do not need a voltage converter. But you will need a plug adapter.

Right Angle 90-degree Power Adapter Connector Converter for TOSHIBA Qosmio X875-Q7290

Similar Messages

Maybe you are looking for