Right click clip in sequence to remove attributes does not work?

Trying to get my old head around the three way color corrector. In the process when I try to right click a clip in the sequence to remove the attributes it does not work. When I do it again the filter square is still ticked. What am I doing wrong? Thanks for your help. The transition from Avid to FCP is not an easy one for me.

so someone else might be helped, you should link to the good captain's post or explain what you were doing wrong.

Similar Messages

  • How do I compress a file on a Mac.  I do not see and option to compress a file when I right click on it and the Apple help does not provide and accurate answer

    How do I compress a file on a Mac.  I do not see and option to compress a file when I right click on it and the Apple help does not provide and accurate answer

    Select the file with one click, then go to File in the menu bar and select Compress...
    By the way Niel's post says control - click. This means click with the control key held down. It produces the same result as going to File in the menu bar and selecting Compress...

  • RIGHT CLICK in Win 7 - Boot Camp 5.1 not working

    first: Background: MacBook A1278 - fresh install of Yosemate, Then used Boot Camp 5.156 and installed W7 ultimate. A few things does not work right of the bat, but most important to me is the right click (I love it, can not live without it in Windows). Also there is not Boot Camp app in the Win Control Panel so can't do config of the trackpad and probably many other sittings. Note on the OS X side I enabled right click and working fine (almost like windows). So what I've done so far to fix it? Re- installed drivers for trackpad manually from BootCamp 5.1 no change. Also tried drivers from Boot Camp 4.... ( some other post suggested) no change either. In fact even the left click (trackpad) is not perfect. And again not in OS X the trackpad works fine there. In many instances I must click many times or there is a delay to take in effect of clicking. When a Mouse connected right click is fine. Any suggestions?

    FYI - Froze with the modded nVidia driver 197.16. Happened when I moved a window. It's so random. Next day Windows Update notified me of a new graphics update (197.45) installed that but then froze randomly when I had Team Fortress 2 running in the main menu.
    When it first happened I didnt get any errors in the Event Viewer.
    Here's a few I recently got in the last freeze.
    HAL:
    The platform firmware has corrupted memory across the previous system power transition. Please check for updated firmware for your system.
    The previous system shutdown at 10:34:56 PM on 28/04/2010 was unexpected.
    ACPI:
    : The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
    Kernel-Power:
    The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
    Warning:
    The driver \Driver\WUDFRd failed to load for the device ACPI\ACPI0008\4&23e1a068&0.
    Will keep digging...

  • Visible attribute does not work for af:showDetailItem using EL

    I cannot get the visible attribute to work using EL and ppr.
    Here is a simple test. I have a jspx with a button (cb1) that toggles a boolean (tab1visible) in a Backing Bean. The af:panelTabbed and af:showDetailItem have partialTriggers="cb1".
    The af:showDetailItem has visible="#{TabTestBk.tab1visible}" and the EL is also set in the title so that I can see how it's set.
    When I press the button (cb1) the visibility of the tab does not change but the title does.
    Any help would be greatly appreciated!
    Here is the code:
    ------------------------- JSPX -----------------------------------------------------
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
    xmlns:f="http://java.sun.com/jsf/core"
    xmlns:h="http://java.sun.com/jsf/html"
    xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
    <af:document>
    <af:form>
    <af:spacer height="10"/>
    <af:commandButton text="Toggle Tab 1 - visible = #{TabTestBk.tab1visible}" binding="#{TabTestBk.cb1}"
    id="cb1"
    actionListener="#{TabTestBk.toggleTab1AL}"/>
    <af:spacer height="20"/>
    <af:panelTabbed id="detailNavPane" partialTriggers="cb1">
         <af:showDetailItem id="tab1" visible="#{TabTestBk.tab1visible}" text="Tab 1 visible = #{TabTestBk.tab1visible}" partialTriggers="cb1">
                                  <af:outputText value="Tab 1 Content"/>
    </af:showDetailItem>
    <af:showDetailItem id="tab2" text="Tab 2">
                                  <af:outputText value="Tab 2 Content"/>
    </af:showDetailItem>
    <af:showDetailItem id="tab3" text="Tab 3">
                                  <af:outputText value="Tab 3 Content"/>
    </af:showDetailItem>
    </af:panelTabbed>
    </af:form>
    </af:document>
    </f:view>
    </jsp:root>
    ------------------------- BACKING BEAN -----------------------------------------------------
    package com.riscs.ui.backing.jsp.claim;
    import javax.faces.event.ActionEvent;
    import oracle.adf.view.rich.component.rich.nav.RichCommandButton;
    public class TabTestBk {
    private RichCommandButton cb1;
    private boolean tab1visible = true;
         public void toggleTab1AL(ActionEvent event) {
              setTab1visible(!tab1visible);
         public void setTab1visible(boolean tab1visible) {
              this.tab1visible = tab1visible;
         public boolean isTab1visible() {
              return tab1visible;
    public void setCb1(RichCommandButton cb1) {
    this.cb1 = cb1;
    public RichCommandButton getCb1() {
    return cb1;
    Thanks!
    Matt
    Edited by: Matt Cannon IBI on Apr 3, 2010 2:45 PM
    Edited by: Matt Cannon IBI on Apr 5, 2010 12:20 AM

    Hi Frank,
    Thanks for the reply! When providing the simple example I left partialSubmit="true" off by mistake... I put it on and still does not work...
    Thanks,
    Matt

  • Since last update anything on the first three lines of a web page if it has a a button to click on to go to another page does not work. use Google Crome for fo

    Loging onto my bank I go to the barclays pege there on the top line is "log in" it used to work when I click on it but has stoped, any button on the first three lines of a web page does not work.
    I now use Google crome but would like to stay with Firefox if this coruption can be sorted.
    Rod

    Please reload the webpage while bypassing the cache using '''one''' of the following steps:
    *Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
    OR
    *Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
    *Press ''Command'' + ''Shift'' + ''R'' (Mac)
    See if this helps solve the issues you had and please report back to us!

  • Remove Element does not work

    Hi Experts,
    I want to loop over a node and remove all elements in this node if they don't match a certain pattern (which needs to be checked by getting the details o these elements).
    So looping over the node and checking whether the pattern matches works pretty fine (I've checked by using a counter variable which counts the number of matches and compares to the total size of the node). But removing the elements does not work.
    I always get the complete table as the result but not without all those elements I that they'd be removed already. I also check the success status (boolean) of the remove function and it delivers always "true" so it seems to work.
    This is the relevant coding:
           for(int c = 0 ; c < wdContext.nodeMatnrlist().size() ; c++){
              wdContext.nodeMatnrlist().moveTo(c);          
              GetMaterialDetails(wdContext.currentMatnrlistElement().getMaterial());          
              if(!wdContext.currentMaterialDetailsElement().modelObject()
    .getOutput().getMaterial_General_Data().getCreated_By().equals("BAIV-SS09-21")){
                   success = wdContext.nodeMatnrlist().removeElement(wdContext.nodeMatnrlist().getCurrentElement());
                   counter++;
    any Ideas on this?
    Many thanks in advance!
    Cheers
    Tobias
    Edited by: Tobias Fickinger on Sep 4, 2009 7:04 PM

    Hi Tobias.
    Try this instead:
    wdContext.nodeMatnrlist().invalidate();
    Regards.
    Julio Herrera

  • TS3048 Right click on Mighty Mouse and Wireless Keyboard are not working

    I have a 24" iMac, early 2009  Lion,10.7.5.  My wireless keyboard and mighty mouse are not working properly. Wireless keyboard- I can turn it on and it will ask me to pair it with the Blue Tooth.  I cannot log the numbers in - I even tried logging them in with my wired keyboard device (which is an Apple keyboard).
    My Mighty Mouse's right click stopped working as well. 
    I have gone through all of the troubleshooting steps-
    New Batteries - Cleared Blue tooth preferences list, repaired permissions, Cleared cache, Made sure that the settings were correct ex: key was not checked on mouse, Removed both devises (keyboard, and mouse) from blue tooth and allowed them to be discovered again, PRAM reset, Hardware check/ reset, and lastly, Reinstall of OSX.
    I am still having the same issue with both devices.
    Thank you.

    This is why you should always have a wired keyboard and mouse as backups.
    Try smc and hope for the best.
    I'd also suggest pram reset but you need the keyboard for that.

  • How can I get the menu bar?pressing Alt button does not show it, right clicking in a space in the tab does not show customize button.

    I read the information on the help pages,but I can t get the menu bar to appear using the advice given.

    Right click the Home button.

  • When I right click to save as an image it does not let me save the image as anything but "all files".

    When I right click on an image to do a save as it does not let me save the image as a jpeg, all that is in the drop down menu is "all files" which saves it as a bunch of numbers and letters etc. It save it as an aspx file.

    Try to add the .jpg file extension yourself if Firefox doesn't do that when you save an image file.<br />
    If you've already saved images with a wrong file extension then rename them and add a .jpg file extension. Check the Properties of the file via the right-click context menu to see if that has worked.

  • Remove device does not work

    Although I can remove it, when iSync starts again the device is still shown. In this case it is Pocket PC, which was a program to connect a Pocket PC to the Mac. I no longer need this.
    I also tried to add a Nokia E90. I d/loaded the plug-in, did a search in bluetooth, and it found the E90 and installed it as a device. However when I try to connect iSync quits.
    The fact I cannot remove the previous device leads me to think that the problem is with iSync.
    Any ideas? TIA

    Your issues don't involve a problem with iSync.
    These instructions no longer appear to be available at Information Appliance Associates support site, but you can do this to remove PocketMac completely from iSync:
    Manually remove PocketMac plugins from iSync in Mac OS X 10.4 or later by…
    • navigating to the iSync application in your Applications folder
    • right-clicking or control-clicking on iSync, then choosing Show Package Contents
    • opening the Contents folder
    • opening the Plugins folder
    • locating the Plugin named PM, Entourage or PocketMac that you want to delete, being sure to leave the other conduit.syncdevice folders alone
    • dragging the folder or folders you want to remove to the Trash, and emptying it
    Why their uninstall option does not perform these steps is beyond me…
    Start with that fix, and then you can address the Nokia 90 issue.

  • I want to delete history; the drop down box shown in your instructions is NOT the drop down I get when I right click; the drop down menue I get DOES NOT offer a delete option....I'm stuck, What do I do?

    I am following the directions give in 'Help'. However, I cannot follow them because the Assumed drop down menu is not the one I get, so I am stuck.
    I want to delete my History...
    ...how is this done?

    See:
    * [[Clearing Location bar history]]
    * [[Cannot clear Location bar history]]
    * [[Smart Location Bar]]
    * http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

  • My bookmarks tab does not show an "organize bookmarks" choice. Also, going to the site, and clicking on the star and selecting "remove bookmark" does not work. What is the problem?

    I can't think of any more details - what I wrote before sums it up. I used to be able to do this on Firefox and don't understand why I can't anymore.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Required attribute does not work with any data type other than String

    sir,
    I am a new to JSF. My problem is that I have used an integer type data in my page which is taking its value from a bean.But in jsf code I have used the required attribute for the <h:inputText> but if I leave the text box empty it is not showing the validation error which it show show. Another problem is that the page is also not navigating to the next page.
    The code is
    <h:inputText value="#{UserBean.age}" required="true"/>
    where age is of integer type

    Well. The fact that it is not jumping to the next view is "works as required". The assumption is, that once you say a field is required, it could be that the application CANNOT function without that value. Therefor the initial view is redisplayed until all required values are entered.
    IF you need a different behaviour, then the OptionalValidator-package which is currently in development state, is the way to go. It allows to specify different validating strategies for different links on a view (no validation, soft validation (== allow to go on, but produce warning messages), hard validation (== the way JSF works right now)). The problem is that with JSF 1.1 it is quite difficult to implement this behaviour. For simple validators (no parameters) it is working, but for complex validators (requiring parameters) not yet. For more info: http://wiki.apache.org/myfaces/OptionalValidationFramework
    No comment on the String-only behaviour, as I have not yet tested/observed that problem...
    hth
    Alexander

  • Metadata Preset Edit - changing or removing keywords does not work

    I can't find this documented so I sure hope this is not a duplicate. Sorry if it is.....
    Existing metadata preset contains various fields populated and checked including keywords both populated and checked. When I edit the preset by either a)removing and unchecking the keywords or b)changing the keywords and leaving it checked followed by Done followed by Save to "Save changes to the preset Preset Name? ..... the changes or removal actions are ignored such that if I immediately Edit the preset, the keywords are back the way they originally were.
    Changes to any other fields in the preset are reflected properly upon subsequent edit. Only keywords seem to be "not changeable or not removable".

    You can use this to report a bug:
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Af:selectOneRadio immediate attribute does not work

    Hi,
    I am using ADF 10g faces components. I have af:selectOneRadio component on my page. I have few required fields on my page. I have set autoSubmit=true and immediate="true" to this component but still the validation fires and show validation errors.
    Anyone with solution would be appreciated.
    --Chintan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Hi,
    immediat = true does suppress client side validation but not server side validation. For this, in a Value Change Listener, you need to call facesContext.renderResponse()
    Frank

Maybe you are looking for