Right click doen't work anymore

I installed Essbase 11.1.1.3 with the Excel Addin and Smart View. I have Office 2007 but I tried also Office 2003.
The problem is that now the right click on a Excel page doesn't work anymore. It doesn't show the menu.
Is this a normal behaviour?
What I have to do? What is a possible solution?
Thanks in advance.

Essbase add ins - Options - global tab - enable secondary button (checked)

Similar Messages

Right clicking no longer works in Safari

Just yesterday, I started experiencing a strange problem with Safari--the right mouse button no longer works. I also tried the right clicking option with command + clicking on the touchpad and that doesn't work either. Right clicking works outside the Safari window and in all other programs, so I'm pretty much baffled. I tried restarting the computer/reopening Safari and it allows me to right click exactly once before the right click option stops working again. I'm not going to use Safari anymore until this problem is resolved, so if anyone has any idea what's going on, please let me know.

While it is possible that a reinstallation is needed, let's start with some easier steps first. I would use some of the techniques described in [this article|http://support.apple.com/kb/HT1199].
Do you have another user account on the computer? If not, create one (System Preferences > Accounts > Click on the lock to authenticate > click the "+" button to add a new account > fill in required info.) Next, log out of your usual account and log in to the other one. Launch Safari. Does the same issue occur?
If yes, you have a system wide issue. If no, it is a user specific issue. There are different methods for troubleshooting each. Post back here with your results and we'll see what we need to do next.
Best of luck.

Clicking doesn't work anymore

I have a 15" MacBook Pro dating from mid 2009. Since the update to Mavericks clicking doesn’t work anymore, at least not properly. Sometimes it doesn’t work at all, sometimes I have to use right-click instead of left-click. Repairing access rights (hope this is the correct translation from German "Zugriffsrechte") helped only partially. Any incompatabilities known in this respect? Or any other suggestions?
Thanks!
t.

Hi and welcome to the BlackBerry Forums
Try restarting the device, with the phone turn on take out the battery for 30 seconds and install the battery again, let me know please, thanks.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Event double -click doens't work

Dear All,
Pls help event double -click doens't work.
What can the reason be for it ?
Regards
Ilhan
data tree1 type ref to cl_gui_alv_tree.
data mr_toolbar type ref to cl_gui_toolbar.
include <icon>.
data: gt_sflight      type ZQMCOMP occurs 0,      "Output-Table
      gt_fieldcatalog type lvc_t_fcat, "Fieldcatalog
      ok_code like sy-ucomm.           "OK-Code
* TREE_EVENT_RECEIVER                                                 *
class tree_event_receiver definition.
public section.
    methods on_doubleclick
     for event link_click of cl_gui_alv_tree
      importing node_key fieldname.
ENDCLASS.                    "lcl_handler DEFINITION
*       CLASS tree_event_receiver IMPLEMENTATION
class tree_event_receiver implementation.
METHOD on_doubleclick.
    MESSAGE I000(38) WITH fieldname.
ENDMETHOD.                    "on_doubleclick
endclass.
start-of-selection.
end-of-selection.
call screen 100.
*&      Module PBO OUTPUT
*       process before output
module pbo output.
set pf-status 'MAIN100'.
if tree1 is initial.
    perform init_tree.
endif.
call method cl_gui_cfw=>flush.
endmodule.                             " PBO OUTPUT
*&      Module PAI INPUT
*       process after input
module pai input.
case ok_code.
    when 'EXIT' or 'BACK' or 'CANC'.
      perform exit_program.
    when others.
      call method cl_gui_cfw=>dispatch.
endcase.
clear ok_code.
call method cl_gui_cfw=>flush.
endmodule.                             " PAI INPUT
*&      Form build_fieldcatalog
*       build fieldcatalog for structure sflight
form build_fieldcatalog.
data: ls_fieldcatalog type lvc_s_fcat.
ls_fieldcatalog-fieldname = 'DUNS'.
ls_fieldcatalog-col_pos = 7.
ls_fieldcatalog-coltext = 'Duns'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'MONAT'.
ls_fieldcatalog-col_pos = 8.
ls_fieldcatalog-coltext = 'Monat'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'ZE'.
ls_fieldcatalog-col_pos = 13.
ls_fieldcatalog-coltext = 'Ze'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'MATKOSTEN'.
ls_fieldcatalog-col_pos = 14.
ls_fieldcatalog-coltext = 'Mat.Kosten'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'ANTEIL'.
ls_fieldcatalog-col_pos = 15.
ls_fieldcatalog-coltext = 'Anteil'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'GESMAT'.
ls_fieldcatalog-col_pos = 16.
ls_fieldcatalog-coltext = 'Ges.Mat'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'GESLOH'.
ls_fieldcatalog-col_pos = 17.
ls_fieldcatalog-coltext = 'Ges.Lohn'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
clear ls_fieldcatalog.
ls_fieldcatalog-fieldname = 'GESAMT'.
ls_fieldcatalog-col_pos = 19.
ls_fieldcatalog-coltext = 'Gesamt'.
APPEND ls_fieldcatalog TO gt_fieldcatalog.
call function 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
            i_structure_name = 'ZQMCOMP'
       CHANGING
            ct_fieldcat      = gt_fieldcatalog.
endform.                               " build_fieldcatalog
*&      Form build_hierarchy_header
*       build hierarchy-header-information
*      -->P_L_HIERARCHY_HEADER strucxture for hierarchy-header
form build_hierarchy_header changing
                               p_hierarchy_header type treev_hhdr.
p_hierarchy_header-heading = 'Hierarchy-Kopf'.            "#EC NOTEXT
p_hierarchy_header-tooltip =
                         'Hierarchy-Kopf !'.
p_hierarchy_header-width = 30.
p_hierarchy_header-width_pix = ''.
endform.                               " build_hierarchy_header
*&      Form exit_program
*       free object and leave program
form exit_program.
call method tree1->free.
leave program.
endform.                               " exit_program
*&      Form build_header
*       build table for html_header
* --> p1        text
* <-- p2        text
form build_comment using
      pt_list_commentary type slis_t_listheader
      p_logo             type sdydo_value.
data: ls_line type slis_listheader.
clear ls_line.
ls_line-typ = 'H'.
ls_line-info = 'LIBOLO '.
append ls_line to pt_list_commentary.
clear ls_line.
clear ls_line.
ls_line-typ = 'A'.
ls_line-info = 'Liste'.
append ls_line to pt_list_commentary.
* p_logo = 'ENJOYSAP_LOGO'.
endform.
*       FORM create_hierarchy                                         *
FORM create_hierarchy.
data: ls_sflight type ZQMCOMP,
        lt_sflight type ZQMCOMP occurs 0.
* get data
select * from ZQMCOMP into table lt_sflight.
* sort lt_sflight by carrid connid fldate.
* add data to tree
data: l_carrid_key type lvc_nkey,
        l_connid_key type lvc_nkey,
        l_last_key type lvc_nkey.
loop at lt_sflight into ls_sflight.
    on change of ls_sflight-KUNDE.
      perform add_carrid_line using    ls_sflight
                              changing l_carrid_key.
    endon.
    on change of ls_sflight-MONAT.
      perform add_connid_line using    ls_sflight
                                       l_carrid_key
                              changing l_connid_key.
    endon.
    perform add_complete_line using ls_sflight
                                     l_connid_key
                            changing l_last_key.
endloop.
* calculate totals
call method tree1->update_calculations.
* this method must be called to send the data to the frontend
call method tree1->frontend_update.
endform.                               " create_hierarchy
*&      Form add_carrid_line
*       add hierarchy-level 1 to tree
*      -->P_LS_SFLIGHT sflight
*      -->P_RELEATKEY   relatkey
*     <-->p_node_key    new node-key
form add_carrid_line using     ps_sflight type ZQMCOMP
             p_relat_key type lvc_nkey
                     changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
        ls_sflight type ZQMCOMP.
* set item-layout
data: lt_item_layout type lvc_t_layi,
        ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3P@'.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-style   =
                        cl_gui_column_tree=>style_intensifd_critical.
append ls_item_layout to lt_item_layout.
* add node
l_node_text = ps_sflight-KUNDE.
call method tree1->add_node
    exporting
          i_relat_node_key = p_relat_key
          i_relationship   = cl_gui_column_tree=>relat_last_child
          i_node_text      = l_node_text
          is_outtab_line   = ls_sflight
          it_item_layout   = lt_item_layout
       importing
          e_new_node_key = p_node_key.
endform.                               " add_carrid_line
*&      Form add_connid_line
*       add hierarchy-level 2 to tree
*      -->P_LS_SFLIGHT sflight
*      -->P_RELEATKEY   relatkey
*     <-->p_node_key    new node-key
form add_connid_line using     ps_sflight type ZQMCOMP
                               p_relat_key type lvc_nkey
                     changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value,
        ls_sflight type sflight.
* set item-layout
data: lt_item_layout type lvc_t_layi,
        ls_item_layout type lvc_s_layi.
ls_item_layout-t_image = '@3Y@'.
ls_item_layout-style   =
                        cl_gui_column_tree=>style_intensified.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
append ls_item_layout to lt_item_layout.
* add node
l_node_text = ps_sflight-MONAT.
call method tree1->add_node
    exporting
          i_relat_node_key = p_relat_key
          i_relationship   = cl_gui_column_tree=>relat_last_child
          i_node_text      = l_node_text
          is_outtab_line   = ls_sflight
          it_item_layout   = lt_item_layout
       importing
          e_new_node_key = p_node_key.
endform.                               " add_connid_line
*&      Form add_cmplete_line
*       add hierarchy-level 3 to tree
*      -->P_LS_SFLIGHT sflight
*      -->P_RELEATKEY   relatkey
*     <-->p_node_key    new node-key
form add_complete_line using   ps_sflight type ZQMCOMP
                               p_relat_key type lvc_nkey
                     changing p_node_key type lvc_nkey.
data: l_node_text type lvc_value.
data: lt_item_layout type lvc_t_layi,
        ls_item_layout type lvc_s_layi.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
append ls_item_layout to lt_item_layout.
l_node_text = ps_sflight-QMART.
call method tree1->add_node
    exporting
          i_relat_node_key = p_relat_key
          i_relationship   = cl_gui_column_tree=>relat_last_child
          is_outtab_line   = ps_sflight
          i_node_text      = l_node_text
          it_item_layout   = lt_item_layout
       importing
          e_new_node_key = p_node_key.
endform.                               " add_complete_line
*&      Form register_events
*       text
* --> p1        text
* <-- p2        text
form register_events.
data: lt_events type cntl_simple_events,
        l_event type cntl_simple_event.
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
append l_event to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
append L_EVENT to lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
append L_EVENT to lt_events.
* set Handler
data: l_event_receiver type ref to tree_event_receiver.
create object l_event_receiver.
set handler l_event_receiver->on_doubleclick for tree1.
call method tree1->set_registered_events
      exporting
        events = lt_events
      exceptions
        cntl_error                = 1
        cntl_system_error         = 2
        illegal_event_combination = 3.
if sy-subrc <> 0.
    message x208(00) with 'ERROR'.                          "#EC NOTEXT
endif.
endform.                               " register_events
*&      Form change_toolbar
*       text
* --> p1        text
* <-- p2        text
form change_toolbar.
* get toolbar control
call method tree1->get_toolbar_object
          importing
              er_toolbar = mr_toolbar.
check not mr_toolbar is initial.
* add seperator to toolbar
call method mr_toolbar->add_button
          exporting
              fcode     = ''
              icon      = ''
              butn_type = cntb_btype_sep
              text      = ''
              quickinfo = 'This is a Seperator'.            "#EC NOTEXT
* add Standard Button to toolbar (for Delete Subtree)
call method mr_toolbar->add_button
          exporting
              fcode     = 'DELETE'
              icon      = '@18@'
              butn_type = cntb_btype_button
              text      = ''
              quickinfo = 'Delete subtree'.                 "#EC NOTEXT
* add Dropdown Button to toolbar (for Insert Line)
call method mr_toolbar->add_button
          exporting
              fcode     = 'INSERT_LC'
              icon      = '@17@'
              butn_type = cntb_btype_dropdown
              text      = ''
              quickinfo = 'Insert Line'.                    "#EC NOTEXT
endform.                               " change_toolbar
*&      Form init_tree
*       text
* --> p1        text
* <-- p2        text
FORM init_tree.
* create fieldcatalog for structure sflight
perform build_fieldcatalog.
* create container for alv-tree
data: l_tree_container_name(30) type c,
        l_custom_container type ref to cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
if sy-batch is initial.
    create object l_custom_container
      exporting
            container_name = l_tree_container_name
      exceptions
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5.
    if sy-subrc <> 0.
      message x208(00) with 'ERROR'.                        "#EC NOTEXT
    endif.
endif.
* create tree control
create object tree1
    exporting
        parent              = l_custom_container
        node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
        item_selection      = 'X'
        no_html_header      = ''
        no_toolbar          = ''
    exceptions
        cntl_error                   = 1
        cntl_system_error            = 2
        create_error                 = 3
        lifetime_error               = 4
        illegal_node_selection_mode = 5
        failed                       = 6
        illegal_column_name          = 7.
if sy-subrc <> 0.
    message x208(00) with 'ERROR'.                          "#EC NOTEXT
endif.
* create Hierarchy-header
data l_hierarchy_header type treev_hhdr.
perform build_hierarchy_header changing l_hierarchy_header.
* create info-table for html-header
data: lt_list_commentary type slis_t_listheader,
        l_logo             type sdydo_value.
perform build_comment using
                 lt_list_commentary
                 l_logo.
* repid for saving variants
data: ls_variant type disvariant.
ls_variant-report = sy-repid.
* create emty tree-control
call method tree1->set_table_for_first_display
     exporting
               I_STRUCTURE_NAME     = 'ZQMCOMP'
               is_hierarchy_header = l_hierarchy_header
               it_list_commentary   = lt_list_commentary
*               i_logo               = l_logo
               i_background_id      = 'ALV_BACKGROUND'
               i_save               = 'A'
               is_variant            = ls_variant
     changing
               it_outtab            = gt_sflight "table must be emty !!
              it_fieldcatalog      = gt_fieldcatalog.
* create hierarchy
perform create_hierarchy.
* add own functioncodes to the toolbar
perform change_toolbar.
* register events
perform register_events.
* adjust column_width
call method tree1->COLUMN_OPTIMIZE.
ENDFORM.                    " init_tree

Hi,
to do so, you need to declare those fields in the form CREATE_HIERARCHY.
For example, to add FLDATE node, you should do:
    ON CHANGE OF LS_SFLIGHT-CARRID.
      PERFORM ADD_CARRID_LINE USING    LS_SFLIGHT
                              CHANGING L_CARRID_KEY.
    ENDON.
    ON CHANGE OF LS_SFLIGHT-CONNID.
      PERFORM ADD_CONNID_LINE USING    LS_SFLIGHT
                                       L_CARRID_KEY
                              CHANGING L_CONNID_KEY.
    ENDON.
    ON CHANGE OF LS_SFLIGHT-FLDATE.
      PERFORM ADD_FLDATE_LINE USING    LS_SFLIGHT
                                       L_CONNID_KEY
                              CHANGING L_FLDATE_KEY.
    ENDON.
    ON CHANGE OF LS_SFLIGHT-PRICE.
      PERFORM ADD_PRICE_LINE USING     LS_SFLIGHT
                                       L_FLDATE_KEY
                              CHANGING L_PRICE_KEY.
    ENDON.
and then create the new FORMS PERFORM ADD_PRICE_LINE and
PERFORM ADD_FLDATE_LINE by copy of the existent
PERFORM ADD_CONNID_LINE and change the L_NODE_TEXT in the form.
I suposed you are new to ALV's, so i have a sugestion for you.
Instead of CL_GUI_ALV_TREE try to use some examples of CL_GUI_ALV_TREE_SIMPLE. It's much more simple to understand and to work with. For example Report BCALV_TREE_SIMPLE_DEMO.
In this case, to add more nodes to the the you just need to add 3 lines of code in
perform build_sort_table.
Regards,

Right click is not working in Web dynpro explorer

Hi All,
I have SAP net weaver developer studio 2.0.9.
when i right click on web dynpro components, to create a component, the context menu is not coming, right click is not working.
though right click works fine in diagram view and outline view.
Please suggest what might have happened? and how to get back the settings.
Cheers,
Srini.

Hello Srinivas,
Try closing and opening NWDS. If you still see the same problem, simple solution for this is, Just Change Workspace to new folder.
Changing workspace - Window -> Workbench -> workspace -> give new path.
Close nwds and open it again. It should solve the problem.
Thanks,
Sridhar

Touchgraph link browser right click won't work; jre 1.4.2_03 linux

touchgraph link browser right click won't work; jre 1.4.2
Wanted to mention that the touchgraph link browser(java client) client starts correctly in Redhat 9, but i found one problem when trying to edit links. The problem being that I can't open the small popup menu when i right click in linux RedHat 9. left clicking while dragging on a selected link (in edit mode) lets you create a new link both in microsoft windows 95a and in Redhat 9. When i right click in win95a, a small menu appears that allows me to edit a link, but this menu doesn't appear after right clicking a link in edit mode in redhat 9 (which does work with TG link browser in win95).
I tried using a 2 button mouse with 3 button emulation. I also tried to use a 3 button logitech trackball which works with the old logitech c7 setting in Redhat. I also tried to operate the mouse with it's three buttons using the number keypad in linux, which works in other applications under linux. The same problem still happens in trying all of these methods.
I was told that unix and windows use different "select," "extend," and "menu" buttons(in relation to the mouse).
Maybe, microsoft windows is using a different method of interpreting the right mouse button than redhat linux 9. if so, maybe there is a way to do this in linux (really, i have no idea how this could be done, but am open to try).
If there is a solution, i would appreciate knowing how to go about doing it. .
note: I am using Sun's java 1.4.2_04 in windows 95a and I am using Sun's java 1.4.2_03 in Redhat 9. Both are the most current, i just downloaded them recently.
note: touchgraph link browser is an open source java client and applet under the GNU general Public License. I think that the source code was included with the binary. I am using touchgraph link browser v 1.20 . I downloaded from sourceforge.net
in google i found the following:
https://lists.xcf.berkeley.edu/lists/advanced-java/1999-September/000532.html
note: mara, you helped me before when i was practically installing redhat 9 and i had a problem with the installation and you mentioned that it was a faulty cd-rom drive. with your help, i am enjoying in learning about linux for the past 5 months since your answer helped me install redhat 9 successfully. Thank you very much since my very first question to you.
Answer Hello,
I downloaded the program and, if I think of the right situation, the right-click doesn't bring a menu for me. The thing I noticed is that when I drag a new link and (with left mouse button pressed) press right button it has an effect of 'canceling' the link. That's why I think that right mouse button works correctly. The problem is why the menu does not appear.
I can see two reasons, both causing problems not easy to solve: bug in the program or incompatibility between Windows and Linux java versions. The second one should not happen.. but it doesn't mean it's impossible. A bug in the program should be easier to find, but not by me (with not very big Java experience it'd take me several days).
What I'd do in your place is to mail the program developers (or report a bug). It won't make things worse, but can fix things.
Sorry that I can't help more
Mara
notethe second half is a post i made to all experts.com

http://www.realvnc.com/pipermail/vnc-list/2001-February/020570.html
this Url has a comment on this problem in linux. just wanted to post this. it might help.

My right click is not working. the context menu does not come up and i can no longer drag files/folders. I have checked the mouse and track pad in system preferences and the correct boxes are all checked (with a support member). Please can you help

My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
Please can you help with this.
It has only just happened in the last few days.
Many thanks

You might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
(Until your issue's resolved, you can Control-Left Click to get the right click functionality).

Right click problem: I did not know about the Yahoo sidebar issue, I have removed all toolbars from my browser from 'view' menu. There is nothing in my 'extensions' to disable. Right click is not working. What to do?

Right clicking is not working on any of the websites. I read up that it's a Yahoo sidebar issue. But, in my extentions, Yahoo sidebar is not there. I had removed all toolbars, but from 'view' menu. Now how do I get my right click to work?
== This happened ==
Every time Firefox opened
== I've noticed it on 1 Aug 2010

This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
Unfortunately no one here can access your support history. You must respond to the emails directly.

TS1702 My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.

My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.

What model iPod do you have? If yo have a 2G iPod. many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

In "Show more Bookmarks" if I right click does not work (I want to open in a new tab)

This is using Mac Firefox current version. I use lots of tabs and don't have space for all of them so there is a >> at the right end for clicking and displaying the rest of them. If I click and display list and highlight one of them, the right click does not work - I want to open in a new tab not use the existing - there are no menu options displayed on these tabs. The tabs across the top work fine for this

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

ODI 11g 11.1.1.7 with Win64 bit OS : Starange problem : Right click does not work for Create new data server in Topology.

ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
On right click nothing happens at all. I have reinstall the ODI multiple times with right installer. issue persist.
Please help.

Hi,
Did you use the generic installer or the win32 one ? You should use the former with Win64.
You can also check that your version of Java is supported in the certification matrix.
Regards,
JeromeFr

Right-click funcionality not working in assessment mode. I NEED HELP!

Hi - I've recently created a number of assessment recordings. The right-click function works as I'm recording as well as when preview the project and then after I publish it. However, when I give it to a colleague(s) to demo it, for some reason the assessment isn't recognizing her right-click and she gets stuck. We're both running the same IE, flash and windows versions so I am really a at a loss on this one. Has anyone ever encountered the same problem and if so what did you do to fix it?! Thanks a million!

Check this out.
http://blogs.adobe.com/captivate/2009/01/adding_rightclick_in_captivate.html
somewhere towards the middle of the page @Mike says the following. Hope this helps
quote
Now when you run the movie in your browser, Right-Click is not working...
off course it will not work, as Right-Click uses Flash External Interface, and this new path
is not a trusted path by your flash player
Solution : You need to add this new path to your Flash Player security
Scenario 2: You just shared your right-click movie folder over the network ,
say the new path for other users is   "\\your-machine-name\My-Right-Click-Movie"
( or "\\nework-machine-02\work\captivate-movies\My-Rihgt-Click" )
and other users are complaining that , Right-Click is not working...
Yes once again the reason is same and new path   "\\your-machine-name\My-Right-Click-Movie"
( or "\\nework-machine-02\work\captivate-movies\My-Rihgt-Click" )   in not a trusted path by
other user's flash player
Solution : other user need to add this path "\\your-machine-name\My-Right-Click-Movie"
into his Flash player security setting.
How to add a path to flash player security setting?
Check this URL :
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
unquote

My iMac mouse right click does not work now

Hi all,
My iMac mouse right click does not work now. It was fine a couple of days ago.
Right click is definitely enabled, I have checked it several times.
A Google search revealed that in Firefox it could be that I'm not using the latest version of Firebug. I have auto updates on and Firebug is the latest version 1.11.3
I use right click for correcting spell checked words, instead of a suggested correct spelling I get the 'open in a new tab' menu.
In Firefox when I right click to open in a new tab I get the menu but it does nothing.
It is driving me mad
Any help will be greatly appreciated,
Thank you
P.S. thought it was suddenly working when I did the spell check in this post but it was the left click doign it....

I don't use Firefox so I can't test it, but it might be something to do with a preference setting. Have a look at this link (ignore all the instructions), just look at the image of the preferences, there appears to be a setting in Javascript preferences relating to contextual menus. Check to see what your settings are:
http://stackoverflow.com/questions/16377381/disable-firefoxs-silly-right-click-c ontext-menu

I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE HIS PROBLEM

I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE THIS PROBLEM

Have you tried going to System Preferences>Mouse and making sure that right click is set to secondary click?

Right click doen't work anymore

Similar Messages

Maybe you are looking for