Right click flash - what is the for/purpose

Can someone please tell me what "Right Click Flash" is used for in Safari?

Since not everyone has a multi-button mouse, this would be a Control-click for a single-button mouse. What do you see, exactly, and at what URL are you seeing it?
Mulder

Similar Messages

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad.

How to remove the option "Set as default background..." from the right-click menu on a picture, for all users.

Hi! I would like to know if there is any possibility to remove the option "Set as default background..." from the right-click menu on a picture, for all users. I know that's possible to edit userContent.css or userChrome.css, but this concerns only a profile at a time and being in a domain, I would like to set this for all people using Firefox.
Can it be possible to edit a mozilla.cfg file to get the same result?
Thank you in advance for help and tips.

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

I have 5.0 What happened to right-click a tab and the Save as bookmark option?

I have 5.0 What happened to right-click a tab and the Save as bookmark option?

"Bookmark This Page" can be accessed via the right-click context menu of that browser page or via "(Firefox) > Bookmarks > Bookmark This Page".
*https://support.mozilla.com/kb/how-do-i-use-bookmarks

On the Adobe Flash Player web page,the Right Click Menu that near the taskbar can not be pop up.

Environment：Win8/64bit Ent JP、IE10 JP、、Adobe Flash Player 11.3.372.94
(when the language is English it happened too )　
Problem:
On the Adobe Flash Player web page，the Right Click Menu that near the taskbar can not be pop up.
And On the Flash Player Help home page(http://helpx.adobe.com/en/flash-player.html) has the same problem,
and menu round the red circle on the below picture is the problem Right Click Menu.
As this problem，If we program use the Flex，the problem that the Right Click Menu can not be pop up must occur.
eg:
IF there is many lines when we use the ListController ,the data nears the taskbar can not be used the Right Click Menu。
Relation:
The problem does not happen when the environment is below
1、IE10(Win7/64bit)
2、Google Chrome(Win8/64bit Ent JP)
Question：
Whether this problem is resolved? If yes，please tell me the solution，thank you!

Can you try to update Flash Player to a newer version (using Windows Update)?

Firefox hangs and will not allow me to access other programs running when I resize a pop up window, move a pop up window, accidentally right click flash content.

Firefox hangs and will not allow me to access other programs running when I resize a pop up window, move a pop up window, accidentally right click flash content.
== This happened ==
A few times a week
== Not sure when it statrted

Hi.
When this happens, please press CTRL+SHIFT+ESC and see how much RAM and CPU Firefox is using. If they're sky high, then... Well, that kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
#run Firefox in safe-mode to disable all extensions and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. When you encounter the problems, you know you've found a problematic extension, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix you issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't do it, I'm out of ideas. Except make sure you've followed my instructions correctly.

Lately when I try to right click it opens a new tab with recent searchs.I have to go back to the tab and right click again to get the options. How do i fix it?

When I try to right click now instead of getting the menu it goes into a new tab showing recent searches.I have to go back and right click again to get the menu and do what I wanted in the first place.Is there a way to fix this.This is really irritating.I like firefox but I'm ready to go back to Chrome. Thanks for any help.

You're right-clicking a link? I can't think of any setting that opens a blank tab when you right-click in a page. It's also strange that it would occur on the first click but not on the second click.
Does this affect all sites?
Are you expecting Firefox's context menu or the site's context menu?
One thing that comes to mind is overriding the site's own right-click handler by disabling scripts from capturing the right click. This is set under
orange Firefox button (or Tools menu) > Options > Content
To the right of "Enable JavaScript" is a button to access "Advanced" options. If it's checked, uncheck the box for "Disable or replace context menus".

What is the exact purpose of Transaction NACE and NAST Table?

Hi All,
What is the exact purpose of Transaction NACE and NAST Table?
Pls help me
Akshitha.

Hi
When a Output type in an apllication doc is configured with a Medium, Partner, Lang and other communication paramters an entry is created in NAST table
so to trigger the output an entry in NAST is compulsory
Output is a link between the Driver Program and the Sapscript,
An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
Check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
Reward points for useful Answers

I belong to a graphic site dreamies.de and my images are disappearing from there since I right clicked on what I thought was set as desktop background. There wa

I belong to a graphic site dreamies.de and my images are disappearing from there since I right clicked on what I thought was set as desktop background. There was another entry under it that said block images from dreamies.de. That is the one that I clicked on by accident and no one knows how to reverse it. Does anyone here know how to reverse it? I was using firefox 3.6 beta 3 when this happened. I am now on firefox 12.
I already tried right-click the page, choose View Page Info, then click Permissions. The first item is the site-specific permission for images and you should be able to reset back to the default here. This did not work.
I also tried right-click View Page Info and click Media. Click the first image on the list and observe the Block Images checkbox above the preview at the bottom. Arrow down the list until you come to a site that is blocked and unblock it. There was no unblock just a delete, so I deleted it. This did not work either.
I know it is a firefox issue because the images are all there when I log in using Internet explorer, but on firefox there are many of my images missing.

This is the question that I need an answer to:
I belong to a graphic site dreamies.de and my images are disappearing from there since I right clicked on what I thought was set as desktop background. There was another entry under it that said block images from dreamies.de. That is the one that I clicked on by accident and no one knows how to reverse it. Does anyone here know how to reverse it? I was using firefox 3.6 beta 3 when this happened. I am now on firefox 12.
I already tried right-click the page, choose View Page Info, then click Permissions. The first item is the site-specific permission for images and you should be able to reset back to the default here. This did not work.
I also tried right-click View Page Info and click Media. Click the first image on the list and observe the Block Images checkbox above the preview at the bottom. Arrow down the list until you come to a site that is blocked and unblock it. There was no unblock just a delete, so I deleted it. This did not work either.
I know it is a firefox issue because the images are all there when I log in using Internet explorer, but on firefox there are many of my images missing.

Is there any way to disable right click and drag and drop for photos on iweb?

Re: protecting photos when using iweb as your web designer...
Is there any way to disable right click and drag and drop for photos using iweb? I have seen tutorials about creating a text box around each image - but is there a better way?

However, there is no way you can prevent someone from making a screenshot of the image as it is displayed on the screen no matter what application you use to create the web page.
You can add a watermark to dissuade the casual "thief" but those who are serious about stealing the photo for their own use can remove the watermark with some effort.
OT

Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable.

Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable. I've never had this happen before. I haven't used it for a few weeks, so maybe there's an update (Mac or otherwise) that's screwing things up? HELP!

I have an Edit In - Photoshop option, but not an Export - Photoshop option.
Obviously to have right-click Edit In to work, the photo you're right-clicking on needs to be selected. I assume this is not the problem, and that the photo is selected.
Mavericks 10.9.3 has a problem where the Users folder is hidden, and you need to update iTunes to fix it, but it's been a few weeks since this happened so hopefully you're up-to-date and the Users folder isn't hidden anymore.
If you can't get things to work, I'd uninstall LR and uninstall Photoshop, then install Photoshop, and update it, then install LR and update it, as a way to get any wayward security or other OS-level things reset.

Right click select node in tree (for a standalone Air app)?

For the sake of userfriendliness (in regard to a context menu) I wold like to "move" the selected node in a tree to the node that currently has the focus when right clicking it - like how the context menu access in windows file explorer works (focus and selected item are always the same when right clicking).
In worst case scenario I would like to disable a created context menu if the selected node and the node that currently has the focus are not the same).
Now users can get confused when right clicking to access my context menu, in the tree structure, if the selected node and the node they are currently hovering over (and thus are in focus) are different.
I was thinking of finding which node currently has the focus and then making that node the selected node - but I cant get it to work:-).
Please, help a beginner.

Hi,
Duplicate thread of
http://swforum.sun.com/jive/thread.jspa?threadID=64518
MJ

My Macbook pro, (late 2010) sometimes will sleep and won't wake up. then the sleep light flashes.What's the problem?

My Macbook pro, (late 2010) sometimes will sleep and won't wake up. then the sleep light flashes.What's the problem

Hi I've been following this thread (along with a different one on the same topic). I've been having the same problem with my ibook. I can add that I have no problem with startup. It's just that the screen "goes to sleep" unexpectedly and may operate normally for a few minutes or a few hours at most. Opening and closing the lid or restarting seems to cause it to awaken but then usually for just a few seconds or minutes. If it is connected to another video display that display continues functioning fine even though the computer screen is blank. In addition the desktop is there and visible faintly or if totally blank can be backlit through the apple logo and can be read. I've had my logic board replaced twice under the extended warranty and assumed it was that but now I'm thinking of the reed switch. Apple refuses to consider any further work under warranty as the last repair was in Jan, 06 and they claim only a 90 parts warranty and the machine is from 03. Any thoughts before I cut the wires? I have reset the pmu, run cocktail and disk utility. Other than the sleep issue the machine works fine. thanks Ronda or anyone else who has any ideas... Dave

Right clicking anything in web pages (for an example, when I want to open a link in a new window) it just gives me some grey box. How do I fix this?

Right clicking anything in web pages (for an example, when I want to open a link in a new window) it just gives me some grey box. How do I fix this?
== This happened ==
Every time Firefox opened
== Today

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Right click flash - what is the for/purpose

Similar Messages

Maybe you are looking for