Right click in sections

I have a complicated report in Crystal 2008. Uses sub reports, shared variables and cross tabs. And for some reason when I right click on the left side on go to section expert nothing happens. But if I go to the top tool bar and go to section expert it comes up. It only happens on this report. I assume it's something on this report.

I figured it out. I think it's a bug. If I conditionally suppress an entire section I can not right click on the section side and use those options in design or preview view. I can still use the top tool bars to insert a section or section expert. I comment out my conditions to suppress and then I can right click in design view.
Example. Group 2 has multiple sections. In section expert
Group 2
Group 2 a
group 2 b
If group 2 as a whole has a conditional suppress it seems to mess up the right click in design.

Similar Messages

After right-clicking the Firefox Icon, a window pops up with one of the titles being "Frequent." Web sites are always being added to this section that I do NOT want. Is there a way to control the number of listings under "Frequent?"

After right clicking the Firefox Icon, a window pops up above the icon with three sections in it. Two are titled, they are "Frequent" and "Tasks."
The "Frequent" section each time I see it, has added previous sites that I have visited. This list then has lots of duplicates in it. I do not need that, and would like to keep this listing a a favored few.
Is there a way to stop having superfluous web-sites added to the "Frequent" list ??
Thanks!

After right clicking the Firefox Icon, a window pops up above the icon with three sections in it. Two are titled, they are "Frequent" and "Tasks."
The "Frequent" section each time I see it, has added previous sites that I have visited. This list then has lots of duplicates in it. I do not need that, and would like to keep this listing a a favored few.
Is there a way to stop having superfluous web-sites added to the "Frequent" list ??
Thanks!

If a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.

if a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.

Hi,
It could be some sort of "flagging" issue where either the AIM Servers have gone out of sync and you are getting two lots of info (There are about three or four servers involved with getting data to your Buddy list)
I can also see the possibility where you have a Contact in your Address Book who has two Screen Names.
You have one in one group and in another they appear to be Off Line. However iChat will still Link them and Show their Capabilities when you Right Click.
One way of checking this is to double click them to open a Text Chat Window.
At the top is the Recipients Bar (See View Menu when Text Chat is Open).
This gives you the option to chose a different Buddy Name if the contact has two (It offers To and From options if you both have Multiple Accounts).
Pic of an Old Chat to someone with Multiple "Names"
They have an @Mac.com name and Jabber ID (As it is an Old Chat the Jabber one is Off Line and their @mac.com name is currently "Away"
You can see I have a Google and three AIM Logins I could use to Speak to them.
9:48 PM Sunday; December 4, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How do I remove the "recent" section that shows up when I right click firefox on my taskbar?

When I right click on firefox window in my taskbar it shows a "recent" section that displays my recent downloads above the "close this window" and other options. I find this annoying and I would like to remove it. I already have set firefox to not remember my download history, but that didn't help.

# In the FF address bar, type "about:config", without the quotes
# Press the enter key
# In the filter, type "taskbar", without the quotes
# Double-click the value for '''browser.taskbar.lists.frequent.enabled''' to change from true to false
# Double-click the value for '''browser.taskbar.lists.tasks.enabled''' to change from true to false

How can i see the MENU bar. Help says "Right-click on an empty section of the Tab Strip. What is a Tab Strip?

My friend just bought a Windows 8 laptop so I told her to download the latest version of FireFox. Unfortunately, some idiot removed the Menu Bar which most people love. You can see all of your options in plain English. Anyway, I referred her to help and cannot believe it's so hard to get a simple answer to this question. Why does FireFox make it so difficult to get an old fashioned menu bar?
Help says, "Right-click on an empty section of the Tab Strip and check Menu Bar". OK, what is a "TAB STRIP" and where does she find it? Who writes these silly, useless help tips?

Grad, you made some good points but we still disagree. I'll acknowledge that maybe millions was a slight exaggeration but nobody has an accurate count. However, I do understand the difference between making something simple and obvious versus a programmer trying to prove how clever he or she is.
Grad, I'm guessing you and your friends are much younger than us as we are well above the age of 50.
As for the number of clicks, I'm confused by your comment. My Menu Bar is always visible so I have to merely '''click once on Bookmarks''' to get to those menu options. It sounds as if you have to initially click on the orange FireFox button in order to see the Menu Bar, and then click a 2nd time on Bookmarks. That sounds like 2 clicks of the mouse to me.
I have Windows 7 and never saw Windows 8 so I can't comment on your excellent question. I personally had the '''Menu Bar displaying 100% of the time''' for as long as I could remember. I just couldn't remember how I initially turned it on several years ago and the help file proved to be more confusing than helpful.

Cut/Copy/Delete w right-click in Thumbnail drawer deletes whole section?

I have a long document with several separate sections. I am trying to cut/copy/delete individual pages by right-clicking in the thumbnail drawer, but it seems to want to delete the entire section rather than individual pages. How do you do this please.

Christopher
That is standard Pages behavior. It selects whole sections in the thumbnails.
If you want to delete individual pages you will need to split the sections by inserting section breaks at the foot of the pages or simply select the content of the pages and delete that.
Make sure you get rid of any floating textboxes, shapes or images on the pages first if you use the 2nd method.
Peter

CS2's Tricky Right-Click (Windows Open With... Has No Illustrator Listing)

I've seen several people ask about this and have had the problem myself. I've seen few answers and most that have asked seemed to have sought help elsewhere or given up. Having solved it with a little hunting and digging around for info, I thought I'd share what I've learned. I know this is a half-decade-old issue, but I had it today and I'm sure I won't be the last. Hopefully somebody else out there can benefit.
Problem: Upon installing the CS2 suite, Illustrator is not listed as an option for opening files in the contextual/right-click menu within Windows Explorer. (Generally applies to PDF filetype, but should work for others if the issue comes up.) Attempts to add Illustrator result in error messages or non-response from the Open With dialogue.
Solution: This solution will require editing your registry. Registry files are very critical to the inner workings of Windows and if you're not sure about what you're doing, please ask an advanced user (or admin/I.T. dept. if you're on a work computer) for assistance.
First, be certain that Illustrator and any other program that can open your PDF files are installed properly. (Photoshop, Acrobat and Reader will do, for example.)
If PDF is already associated with another program, you can skip to the next step. In Windows Explorer, select your PDF and right-click on it. Select Open With... then pick any program. (Actually, even a program that can't open PDF's should work for this process, but you may have unnecessary difficulty.) See that the checkbox to always use the selected program is turned on. Click OK. You may close the program after it opens.
Now you'll need to retrieve the complete path to Illustrator. One easy way to find this is to locate the program listing in your Start menu, desktop, wherever it is. Right-click that icon and select Properties. You do NOT want the path that's listed under Location on the General tab. On the Shortcut tab, select and copy the path listed in the Target field. You do not need to copy the quotation marks, if there are any.
Next we need the Registry Editor...please do heed the warning above before proceeding. Click on the Start menu, then Run... In the Run pop-up (the Start\Search box in Windows 7 also works) type regedit then click OK.
You should now have a window with what look like folder branches on the left-hand side. These folders are called keys. If you only see one item marked Computer, click the plus sign or arrow to expand the list. There will be one key labaled HKEY_CLASSES_ROOT. Expand that as well. You should get a VERY long list that begins with * and proceeds through many file extensions and other items. Scroll down...way down, past all the items that start with periods and other special characters. We're looking for the P section, which in my list is about 3/4 of the way to the bottom. Expand the key labeled pdf_auto_file. (There is a .pdf item higher in the list. Keep going if you're there.)
We are now at: Computer\HKEY_CLASSES_ROOT\pdf_auto_file
Expand all of the keys inside pdf_auto_file. There should be one named shell, holding edit and open, each of which holds a final key named command. Inside each of the command keys should be one item that shows on the right-hand side. That item (this is called a value) is named (Default) and you'll notice the data within holds the path to the program you selected earlier. This is what we need to change, iniside both command keys.
Double-click the value name (Default) or icon. A window will pop up named Edit String. In this window, note the Value data containing the program file path. This is usually surrounded by " and " "%1 ". Select only the path between the quotation marks, ending in exe. Now paste the path you copied earlier for Illustrator. Take note that the complete string looks similar to:
"E:\Adobe\CS2\Adobe Illustrator CS2\Support Files\Contents\Windows\Illustrator.exe" "%1"
Click OK to close the box, then go to the other command key and repeat the replacement for its data value. Close that box and you should be finished editing. You may close the Registry Editor now, as well as any other windows you don't need.
In Windows 7, this was pretty much all I needed to do. Earlier versions may or may not need rebooting Windows to update the active system. I've now got Illustrator as my default program for PDF's and it's available in the Open With... window should I chose to change my mind a couple times. The PDF icon even updated itself.
Should you need any details explained further, drop a reply...I think I'll get a notice, though this is my first post here. If I don't respond very soon, feel free to e-mail my nickname @aol.com to remind me. Good luck!

In XP Pro, not there to be 100% sure, that "open with" already has Illustrator CS3 listed and no version 10, the opposite of what Bridge shows.
I'll try it, just in case that helps update Bridge.
Thanks

Email Security Plug-in - Doesn't seem to work with right click or save and send

I've searched the knowledge base but have not located the answer yet.
We have the Encrypt Message plug-in installed to flag the email [SEND SECURE]. This works very well when in Outlook. It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office. The add-in still shows and users are clicking it and the Send button but the emails are not going securely. We are on Microsoft2010 on mostly XP machines.
How can I get Encrypt Message to work in all instances?
Thank you.
Starla

Andreas
I am getting an error. See below for what I'm choosing and the response. let me know if I'm supposed to be trying to download from another area.
Thanks
Starla
Email Security Plug-in - Doesn't seem to work with right click or save and send
Cisco IronPort Email Security Appliance C370
Release:IPAS
Filename: CiscoEmailSecurity_7-2-0-039.exe
Remove
Details
Release
IPAS
Filename
CiscoEmailSecurity_7-2-0-039.exe
Release Date
25/Oct/2011
Description
Cisco IronPort Email Security Plug-in (Outlook)
Size
32541.84375 KB (33322848 bytes)
Router Checksum
0x553f
MD5
f0c864697d9e1a3e8f5297062943ac50
Email Security Plug-in - Doesn't seem to work with right click or save and send
Save the device to 'My Added Devices' list
More Info
'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Added Devices' section. 2. Selecting any task specific product
   selector and clicking on 'My Added
    Devices' in left pane.
Email Security Plug-in - Doesn't seem to work with right click or save and send
Set Cisco Notification Alert
More Info
All 'Cisco Notification Alerts' list could be found
by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Support Notifications' section.
Cisco service contract information indicates you are not authorized to download software for the following product(s):
Cisco IronPort Email Security Appliance C170
Cisco IronPort Email Security Appliance C370
Cisco IronPort Email Security Appliance C650
To download software for other product(s), remove the software for the product(s) listed above.
Or, if you feel this message is in error, please:
1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
         User ID (Cisco.com ID used to download software)
         Contact Name
         Company Name
         Contract Number
         Product ID
         Desired Software Release or File Name
2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete.

No backup my iphone option with right click on itunes.. how to back up?

how to back up my iphone 4 with itunes. device section is empty on itunes preference .itunes window right click my iphone icon there is no backup option.. only sync,transfer purchase eject ..
how can i back up my iphone for future restore..
anyone help me step by step?
thanks

I've had similar issues and had to use a program to transfer files from my iPhone to my computer, then transfer the content from that program to my itunes account. There may be other ways, but that was my experience.
Besides what mentioned above, i like to share you a page about [iPhone Transfer Backup Reviews|http://www.softwarebbs.com/wiki/IPhoneTransfer_SoftwareReviews], which included transferring iPhone contents to computer/iTunes.
Cheers.

How to click, when "right-click dominant" is turned on?

My sister is on a 17 hour train ride now with her new macbook with Leopard. She doesn't have a mouse/wacom tablet with her now. Without knowing the implications fully, she went into the mouse settings, and turned on "right-click dominant". Her computer only has one click button, which now brings up the mini-menu that comes up with a right-click. Control-click does the same thing. She is stuck. She can't get back into the preferences to unclick the setting, because she can't click.
Is there a way?? How to click, when "right-click dominant" is turned on?

I am not familiar with the term "right-click dominant". The mouse section of the System Preferences has a "primary mouse button left/right" setting, but that affects the mouse, not the track pad. I would try all the modifier keys (and combination of) I can think of to see if one switches the track pad click. If that fails, a restart (press the power button and return) might straighten it out.

Left clicking mouse acts as if I'm right clicking, and comes up with right click menu?

Hi I was wondering whether anyone could help me with this, I've had this problem for a week or so now and it's beginning to get frustrating.
I have a newish iMac, bought in January, and I've been having this problem the last week or so, where when I left click something, it acts as if I am right clicking it and it comes up with the right click menu. I has happened mostly while on the internet (chrome), but also when I'm just on my desktop, but less often.
It only happens every so often, and rights itself after a couple of minutes. What could be causing this, and how do I stop it?
This is my first ever post on here, so I do apologise if I have been vague or I have posted this question in the wrong section, I am also new to macs (well since January).
The mouse I am using is a dell wired mouse, a couple of years old, which I just plugged in without the need of installing software etc.
Many thanks for any help in advance.

Hello & welcome!
No worries, you did great for a 1st post, & this is generally a friendly place.
It sounds light it's the Mouse button from here, to test it...
Go to System Preferences > Mouse, change the Primary button to the Right button... does the Right button ever do that now as the left button?

VMWare mouse right click issue

Hey all,
I am having an issue with right click in vmware using XFCE for arch. when i right click the menu gets brought up fine but it almost instantly selects the first option in the menu. if i move the mouse in the opposite direction of the menu really fast while right clicking or if i hold down the right mouse button it does not select the first option. to me it seems like the timer for function that selects the option under the pointer when you release the mouse button is called too fast. Any ideas how to fix this?
Thanks,
Hemmar

For VMware related posts, maybe it's a good idea to include the following information
- Which VMware product: player, workstation, esxi and which version
- Using open-vm-tools or vmware tools
- Using vmwgfx ?
Important in your case:
edit or create /etc/X11/xorg.conf.d/20-gpudriver.conf
Section "Device"
Identifier "Card0"
Driver "vmware"
EndSection

Mighty mouse right click not working...

Hi,
I've recently bought my macbook pro in the summer along with a wireless mighty mouse. after working on the computer a while, the right click function stops working! i tried installing the software that comes with the mouse but i get the same results...
any suggestions?
thanks in advance!

. Follow the steps for disassembling the MM on many of the web sites until you have the upper shell separated from the base. I found removing the bottom grey ring the easiest method.
2. Inside the upper shell you will see the plastic backed carbon traces used to detect the finger locations. In the centre of the upper shell is also a copper strip adhered to the shell. The plastic traces and the copper shim have a connection through a carbon dot on the shell where there are two holes next to a black carbon dot. I found that there were two issues with my MM that may have caused my issues. The first was that the plastic detectors were not fully adhered and flat on the inner shell. Then I found that the small carbon button which contacts the copper was not fully pressed down. I ran my finger over the entire internal surface of the shell to press down the adhesive bonded parts and then reassembled the mouse.
3. Instead of gluing the bottom grey ring back on the mouse, fit it in place with small sections of 3M invisible tape, over the grey ring and upper case, just in case things go awry again. If they're small enough, you won't see them when the mouse in operation and the case remains securely closed. Once you are sure you have no more problems then you can add a dab or two of superglue to permanently close the case at a later date or still have access to clean the scroll mechanism at a later time as well.
The other outcome might be that my disassembly and reassmbly reseated a poorly contacting cable(s) from the base the the upper shell. Either way, I have a fully functioning right click again in all situations. I have not had to remove the batteries in the mouse for over a week now whereas the power reset was becoming an hourly occurrence previously.

How to disable silverlight "Do you want to allow this Web application to access your clipboard?" popup window, when tyring to right click and paste?

Hi,
When im trying to right click and choose paste. im getting a dialog box.. "Do you want to allow this Web application to access your clipboard?". How do i disable it for all users?
i found that, we can able to disable it for only one user, if we create a 'Clipboard' DWORD key with value '11' in the registry path: HKEY_USERS -> S-1-5-21-159.. -> Software -> AppDataFlow -> Software -> Microsoft ->
Silverlight -> [website url]
Even, i tried
Internet Options> Security> Internet Zone> Custom Level> Scripting section> Allow Programmatic clipboard access> Enable. But its not working.
Please let me know how to disable that popup for all users?

It works fine on my machine here which is win7 pro.
Your options are limited
You know one way - the registry entry.
The option:
Internet Options> Security> Internet Zone> Custom Level> Scripting section> Allow Programmatic clipboard access> Enable.
Has been changed by later versions of Internet explorer tightening security.
I guess you could try:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"
meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7" />
Bit difficult for me to test at the moment, but that could work.
If that's no good.
The alternative is to give the app elevated trust.
This is a PITA because you have to obtain a security cert and sign the xap with it.
They expire as well and you then need to buy a new one.
Costs several hundred quid a year ( this is one time cost rather than per user ).
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML

ALV grid disable right click options

Hi experts,
Iam working on <b>normal</b> ALV grid.
In the output of the ALV, if we click right click,
we can see 'Cut', 'Copy text', 'Insert with Overwirte' options.
How can i disable(or remove) these 3 options?
Pls give me suggestions
Reward guaranteed,
thanks
kaki

Hello Kaki
You have to handle event <b>CONTEXT_MENU_REQUEST</b> (of class CL_GUI_ALV_GRID). The following sample report shows how to do that:
*& Report ZUS_SDN_ALV_CONTEXT_MENU_1
*& Flow logic of screen 100 (no screen elements; ok_code = GD_OKCODE)
*&    PROCESS BEFORE OUTPUT.
*&      MODULE STATUS_0100.
*&    PROCESS AFTER INPUT.
*&      MODULE USER_COMMAND_0100.
REPORT zus_sdn_alv_context_menu_1.
DATA:
gd_okcode        TYPE ui_func,
go_docking       TYPE REF TO cl_gui_docking_container,
go_splitter      TYPE REF TO cl_gui_splitter_container,
go_cell_top      TYPE REF TO cl_gui_container,
go_cell_bottom   TYPE REF TO cl_gui_container,
go_grid1         TYPE REF TO cl_gui_alv_grid,
go_grid2         TYPE REF TO cl_gui_alv_grid,
gs_layout        TYPE lvc_s_layo.
DATA:
gt_knb1          TYPE STANDARD TABLE OF knb1,
gt_knvv          TYPE STANDARD TABLE OF knvv.
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING
          e_row
          e_column
          es_row_no
          sender,
      handle_context_menu_request FOR EVENT context_menu_request
                                                 OF cl_gui_alv_grid
        IMPORTING
          e_object
          sender,
      handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
        IMPORTING
          e_ucomm
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*   define local data
    DATA:
      ls_knb1      TYPE knb1.
    CHECK ( sender = go_grid1 ).
    READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
    CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
    CALL METHOD go_grid1->set_current_cell_via_id
      EXPORTING
*        IS_ROW_ID    =
*        IS_COLUMN_ID =
        is_row_no    = es_row_no.
*   Triggers PAI of the dynpro with the specified ok-code
    CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ).
ENDMETHOD.                    "handle_double_click
METHOD handle_context_menu_request.
*   define local data
    DATA: lt_fcodes    TYPE ui_funcattr,
          ls_fcode     TYPE uiattentry,
          ls_func      TYPE ui_func,
          lt_func      TYPE ui_functions.
    "   Inactivate all standard functions
    CALL METHOD e_object->get_functions
      IMPORTING
        fcodes = lt_fcodes.
    LOOP AT lt_fcodes INTO ls_fcode.
      ls_func = ls_fcode-fcode.
      APPEND ls_func TO lt_func.
    ENDLOOP.
    e_object->disable_functions( lt_func ).
"   Add new functions
    e_object->add_separator( ).
    CALL METHOD e_object->add_function
      EXPORTING
        fcode = 'XD03'
        text = 'Call Transaction'.
    CALL METHOD e_object->add_function
      EXPORTING
        fcode = 'DETAILS'
        text = 'Display Details'.
ENDMETHOD.                    "handle_context_menu_request
METHOD handle_user_command.
*   define local data
    DATA:
      ls_knb1   TYPE knb1,
      ls_row    TYPE lvc_s_row,
      ls_col    TYPE lvc_s_col.
    "   NOTE: in case of CL_GUI_ALV_GRID the functions of a context menu
    "         are handled in method USER_COMMAND.
    CHECK ( e_ucomm = 'XD03'      OR
            e_ucomm = 'DETAILS' ).
    CALL METHOD sender->get_current_cell
      IMPORTING
        es_row_id = ls_row
        es_col_id = ls_col.
    CASE e_ucomm.
      WHEN 'XD03'.
        READ TABLE gt_knb1 INTO ls_knb1 INDEX ls_row-index.
        SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
        SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
        CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
      WHEN 'DETAILS'.
"       NOTE: only for the sake of simplicity the event handler method
        "             is called
        CALL METHOD lcl_eventhandler=>handle_double_click
          EXPORTING
            e_row = ls_row
            sender = go_grid1.
      WHEN OTHERS.
    ENDCASE.
ENDMETHOD.                    "handle_user_command
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT        * FROM knb1 INTO TABLE gt_knb1
         WHERE bukrs = '1000'.
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
    EXPORTING
      parent            = go_docking
      rows              = 2
      columns           = 1
*      NO_AUTODEF_PROGID_DYNNR =
*      NAME              =
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
    EXPORTING
      row       = 1
      column    = 1
    RECEIVING
      container = go_cell_top.
CALL METHOD go_splitter->get_container
    EXPORTING
      row       = 2
      column    = 1
    RECEIVING
      container = go_cell_bottom.
* Create ALV grids
CREATE OBJECT go_grid1
    EXPORTING
      i_parent          = go_cell_top
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
    lcl_eventhandler=>handle_double_click         FOR go_grid1,
    lcl_eventhandler=>handle_context_menu_request FOR go_grid1,
    lcl_eventhandler=>handle_user_command         FOR go_grid1.
CREATE OBJECT go_grid2
    EXPORTING
      i_parent          = go_cell_bottom
    EXCEPTIONS
      OTHERS            = 5.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Display data
gs_layout-grid_title = 'Customers'.
CALL METHOD go_grid1->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNB1'
      is_layout        = gs_layout
    CHANGING
      it_outtab        = gt_knb1
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gs_layout-grid_title = 'Customers Details (Sales Areas)'.
CALL METHOD go_grid2->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNVV'
      is_layout        = gs_layout
    CHANGING
      it_outtab        = gt_knvv " empty !!!
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
    EXPORTING
      repid                       = syst-repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
*    EXPORTING
*      IS_STABLE      =
*      I_SOFT_REFRESH =
    EXCEPTIONS
      OTHERS         = 2.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'END' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
*   User has pushed button "Display Details"
    WHEN 'DETAIL'.
      PERFORM entry_show_details.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form ENTRY_SHOW_DETAILS
*       text
* --> p1        text
* <-- p2        text
FORM entry_show_details .
* define local data
DATA:
    ld_row      TYPE i,
    ls_knb1     TYPE knb1.
CALL METHOD go_grid1->get_current_cell
    IMPORTING
      e_row = ld_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT        * FROM knvv INTO TABLE gt_knvv
         WHERE kunnr = ls_knb1-kunnr.
ENDFORM.                    " ENTRY_SHOW_DETAILS
Regards
Uwe

Right click in sections

Similar Messages

Maybe you are looking for