Right Click jpg from Windows Explorer Convert to pdf page size issue

I'm running Acrobat 8 Standard and trying to figure out what controls the page size when you right click and select convert to pdf on a jpg file. I've got several jpg files of all shapes and sizes and no matter what I try the pdf is always Letter Landscape. If I use File - Create PDF - From File within Acrobat then the pdf retains the size of the original jpg and that is what I want the right click to do.

I wanted to add a little more detail. Using the right click convert to pdf on any jpg results in a pdf that is landscape letter. If the jpg is smaller than the page it is scaled up but if it bigger then it gets cropped. I can open the same files from inside Acrobat and they convert without a problem. Any thoughts on what controls the conversion process whenever using the right click feature on a jpg file?

Similar Messages

R-Click print from Windows Explorer doesn't print actual document size.

We publish AutoCAD drawings to PDF routinely. They are setup in 11x17 landscape format. They are published (AutoCAD's way of printing multiple at once) to PDF in 11x17 landscape format. When you open the file with Reader they are in 11x17 landscape format. You can manually print them after opening from adobe reader in in 11x17 landscape format. But, when you are in Windows Explorer, right click these PDF file(s) then click print, they are printed in 8.5x11 landscape format.
How can we get these to print in the documents actual format? We want to be able to R-Click the file(s) and print them from Windows Explorer without having to open Reader.

Does anyone know how they can help me? We could really use this.

Converting to PDF: Page Size varies

I have to turn a spreadsheet in to a report. Numbers is doing the business until I export to PDF. One page is not coming out as A4 even though I have set it to be A4, reduced font size, dragged the custom size slider etc it still comes out the way it wants. The trouble is that this page is affecting the size of the other 10 pages on the spreadsheet and making them not A4 too. I know they are ok because I have printed individually. Is there a way of exporting a series of 12 sheets to PDF while excluding one (option seems to be all or current sheet). Or is there another way of sorting his that I am missing?

M,
Paper size is a Document property, set in the Document Inspector. It affects every Page of every Sheet in your document. You can't set one Sheet or Page differently from any other. That's why when you change the size for one sheet, all of them change.
You have a couple of options that I can think of, but only you can decide how best to handle this. I think I would try to make the one odd sheet a separate document. That might require that you duplicate some of your data in the document with only one Sheet. Or, you could print everything to one format as PDF and use the Preview app to Print and Scale the odd page. You are going to be printing this one page separately from the rest anyway since it requires a paper change in the printer.
Jerry

Saving Adobe PDF Page Size without Admin Rights?

Ok to get started, to define the limits of my environment for replication:
I'm using Windows XP SP3 and have tried Adobe Acrobat 8, 9, and X, my computer is on a network at work, and my user rights are limited.
Open Printing Preferences, Click Add...
The "Add Custom Paper Size" window appears, give a new name and define sizes of the paper.
Lets say I'm printing to a large format say 36" Tall by 108" Long (3ft x 9ft)
Click Add/Modify, the window goes away, focus again on Adobe PDF Printing Preferences. Click the drop down box for Adobe PDF Page Size:
The page size I just added to the list is not there!
The solution to the this problem is to have Administrative Rights to your machine in order to add custom paper sizes.
Note to Adobe Acrobat Programmers/Designers: please redevelop this feature to allow users to add paper sizes without Power User or Admin Rights. In a secure network these rights are not easily given out to every Dick and Jane that uses your software.

Interesting post, and for once, something one should be able
to work with.
I have a similar problem:
We're using a software distribution tool to install
msi-packages via rpc. Trying to distribute the latest flashplayer
works fine, but the users can't open flash-files, whether with
firefox nor internetexplorer tried 6 and 7 with latest patches.
I've found two possible ways to install a flashplayer plugin,
but both require manual input, which is just not possible for
>100 Clients. just to mention: clean registry and then install
with admin rights or just run the installer with admin rights from
the local machine.
Another problem is, that our company security policy
prohibits from using admin-rights for most installations.
is there any workaround?
regards
Matthias Hilpert
ps: /sticky or at least a FAQ :-)

Print from Windows Explorer Right Click (Adobe Reader X, WinXP)

When I right click on a batch of PDF files in Windows Exploer (WinXP) and click "Print" Reader used to print them all to
my default printer. With Reader X windows waits patiently for me to close Reader before printing each file.

Take a look at: http://forums.adobe.com/thread/797804?tstart=0
Date: Wed, 16 Mar 2011 08:49:08 -0600
From: [email protected]
To: [email protected]
Subject: Print from Windows Explorer Right Click (Adobe Reader X, WinXP)
I am also getting exactly the same problem, highlighting multiple pdf files right clicking and choosing "print" prints the first document, fails to close the adobe x window and sits there patiently untill it's manualy closed and then the next document prints - repeat - loop.
Have this happening on just about every windows xp machine in the office that I try it on and any and all versions of "Adobe X" that I care to install.
would love a fix for this, reinstalling 9 manually on every PC would waste a day of my life.
>

Files Opened from Windows Explorer Resize Illustrator Window

Windows 7 Enterprise, SP1
Illustrator CS6 16.0.3, 64bit
Over the past weeks, opening any Illustrator file (.ai or .eps) from Windows Explorer resizes the main illustrator window. The window "restores down" from my maximized view that I always run. This does not happen when I use the File > Open command from AI. Using File > Open, the AI window remains maximized and my artwork file opens in a tab (my preference).
It's really just a nuisance, but it's wearing thin now. More frustrating, this behavior only started a few weeks ago (been running CS6 for a few months.)
I found a post describing similar behavior from the CS3/2008 era... The fix is a workaround. Lots of complaints about this historically... with plenty of comments like "I hope they finally fix this is CS4."
http://forums.adobe.com/message/1265916#1265916
How may I fix this behavior without writing a batch file and making Registry edits (per 2008 post)?

This definitely isn't a fix, but is the best work-around I've been able to come up with.
I'm also on Win 7 Enterprise 64-bit using Illustrator 16.0.3 64-bit.
Although Windows/Adobe (I don't know whose fault it is) doesn't maintain the maximized state, it does (for me) seem to remember the last restored down size and window position, so here's what I did:
Restore down the main Illustrator window.
Move the window so that the top left corner is positioned in the top left corner of the screen/desktop.
Resize the window from the bottom-right corner down to the bottom right corner of the screen/desktop.
At this point, it should appear maximized (or very nearly so), even though it actually isn't.
Now (for me at least) when I double-click an AI file from Windows Explorer, the Illustrator window drops out of maximized state to this same nearly maximized state (although technically not maximized).
Hope this works for others.

Can't drag & drop images from Windows Explorer into Elements 7

Hi...
I'm a Photoshop Elements 7 newbie... I can't drag and drop images (jpeg, tiff, Olympus RAW) from Windows Explorer (file explorer and not IE) to Photoshop Elements like I can in Corel Paint Shop Pro X2? It also works in Corel Painter IX.5 & ArtRage 3 (except for RAW)... My operating system is Windows 7 Home Premium 64 bit.... I've uninstalled and re-installed Elements but to no avail. I've also tried to run Elements under various compatability modes but still no luck....
Any ideas?
It's driving me nuts...
Thanks kindly
Ken

"I just remembered: If the Editor or Organizer are "running as administrator", then you can't drag and drop from Windows Explorer. To see if you're running the program as administrator right click the desktop icon or Start Menu item you use to launch PS and select Properties. On the Compatibility tab, is Run This Program As Administrator checked? (Note that in Vista and Windows 7, running a program as administrator is different than running it in an account that's a member of the Administrator's group.)"
I wasn't running the program as administrator so I enabled that compatibility property applied it then disabled it. It seems to work now. I thought I'd add this to flesh out the previous answer. I didn't open the program in between the enable and disable, so it is a quick process. Also, I am using windows 8.1 and had to open the file location in order to do this. Right click on the tile then choose 'open file location'

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

Can't print from Windows Explorer

After installing the "HP Officejet Pro 8600 e-All-in-One Printer - N911a", on a Windows 7 64-bit PC, that is Ethernet connected, I get the following error message:
Script Error
An error has occurred in the script on this page.
Line: 2061
Char: 1
Error: Invalid procedure call or argument
Code: 0
URL: res://ieframe.dll/preview.js
When I try to print from Windows Explorer; however, I can print from other applications such as Word and Quicken OK, and I can print from Explorer OK from a Windows XP PC. Anyone have any suggestions?

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Can't open PDF files from Windows Explorer on Windows 8.1

Hello,
after I've upgraded to Windows 8.1, I can't open PDF files from Windows Explorer (directly double clicking the file). The AcroRd32.exe runs in the background (2x !) as I see the processes in task manager, but there is no user interface visible. I have Acrobat
Reader 11.0.06, the desktop version (not Metro). I tried uninstalling the Acrobat reader and installing it again but this didn't help. The only way to open PDF files is to close the AcroRd32.exe from the task manager, open empty Acrobat Reader from the desktop
and then drag&drop the PDF file over that window. This is quite inconvenient. Is there a way to fix this issue so I can open PDF files directly from windows explorer?
Many thanks!

I had to install adobe reader, but PDF's used to display just fine with IE, any idea what happened ?
Windows 8.1 pro.
thx
lee

New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.

New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer. If I select 2 raw files and click "Open" Camera RAW will only open 1 raw, then when I click "Done" it will close and open the second, sequentially. Previous Photoshop CC and RAW worked fine, it would open mulitple RAW at the same time. How do I fix this?

If it worked for you that way previously there isn't much to comment about. I just tried opening multiple images from Windows Explorer with Photoshop CS6 and Camera Raw 8.6, and the first image would open and when I clicked cancel then the second image would open. But if I wanted multiple images opened in Camera Raw to work on them simultaneously it was necessary for me to open them from Bridge. I just did it as an experiment because I normally use Lightroom. Anyway, IF it was a feature at one time to work as you described, it doesn't seem to be that way now.

Drag image file from Windows Explorer to a new layer in an open file

I want to know if it's possible in CS3 to drag an image file from Windows Explorer into an already open file in PS. Right now when I drag over, it opens that file. I want to have it where the image is inserted as a new layer into the existing open file. is that possible?

Hi, I'm using CS4 and would love to be able to drag n drop straight to a new layer in an existing file.
At present when I drag n drop I get a new image in PS. I then have to move this to my existing image. I have tried draging to the tab, the layer box, the image, the blank space, using shift,ctrl & alt.
A simple how to would be nice

CS6 won't open all images from Windows Explorer

Hi!
Today a colleague of mine encountered a strange behaviour with Photoshop CS6 64bit on a Win7-PC (also 64bit), which I could reproduce on a second machine.
Highlighting severeal jpg-images in a folder and hitting the Enter-key opens
all images in Photoshop, when Photoshop wasn't running
only some images (1 - 4 images out of 5) randomly, when Photoshop was already running
The same effect happens when I use the "Open with..."-command from Windows Explorer on the images.
Does anyone know this issue?
Regards
Dieter

Normal behavior. Windows only allows a given number of files to be handed over via DDE and that's what happens when a process is already active. When you do this with no program open, it simply blindly fires a standard command with only one file as an argument, but does so for every single file. That's why it works then. Nothing you can change. It's a limitation in Windows itself combined with the fact that only one PS process can be active....
Mylenium

Can't drag and drop from Windows Explorer into iTunes 10

HI. I recently upgraded to iTunes 10 and now, it won't let me drag and drop files from Windows explorer into iTunes. Is there a setting I need to turn on to get this to work again? I am running Vista.

I might be wrong, but ...
I know Microsoft Office 2011 is Mountain Lion compatible. In fact, Microsoft released updates to it right around the time of Mountain Lion's release to assure compatibility.
I do not believe Microsoft Office 2008 is Mountain Lion compatible.

Dreamweaver has suddenly started trying to open PSD files even from Windows Explorer

All my psd files have the little dreamweaver icon next to
them now. When I try to open them either from Dreamweaver or from
Windows Explorer, I get a message in Dreamweaver "failed to open
document". I've tried changing my preferences for which program
should open psd files but that isn't working either. I can open
them from within photoshop or from within dreamweaver only if I
righ click on it and tell it to open with photoshop.
This just started but I have been using CS3 for a while now.
What am I missing?
Thanks.

I found a solution but it's a pain in the .... Apparently
this is just another of Vista's many quirks and annoyances. n h c,
I tried what you said and it just wouldn't work.
I searched again on google and ended up downloading a program
called creative element power tools, which finally let me change
the file association.
Thanks for the suggestions.

Right Click jpg from Windows Explorer Convert to pdf page size issue

Similar Messages

Maybe you are looking for