Right-Click pop-up more than one Description and tip

Is it possible to edit the run-time popup menu for a right click on a control?
My front panel has a cluster within a cluster and the right-click popup menu gives you two different "Description and Tip" to select from. This is confusing for the user.
How do I edit the run-time right-click popup menu?

hi
search for right click, context menu etc. in this forum. there are several posted vis to create your own right-click menues and catch the selected item (some of them are really neat).
best regards
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Similar Messages

  • X220 touchpad, Can't right click drag with more than one stroke

    1. Put cursor over a file or folder on the desktop.
    2. Hold the lower right corner of the touchpad (embedded right button)
    3. Drag with another finger (either hand)
    4. Lift off the dragging finger to reposition, then touch again, and it lets go of the icon, returning it to the original position.  (This means I'm not accidentally lifting off the right button. If I was doing that, the icon would remain where I moved it to.
    There are 3 ways to keep it from doing this:
    a. Use the right hard button above the pad.
    b. Press the touchpad button below the bend along the lower edge (As close to the edge as possible.
    c. Insulate the button pressing finger from the pad with folded paper, or press with a pencil eraser.
    b and c above show that it's the presence of a touch in the active area above the lower edge bend,  This touch, plus another touch being initiated in any other area of the pad interrupts the drag operation.
    The "tap and drag" settings have no effect on this.
    I just received the machine today after a 1 month order wait, and this is frustating enough to make me want to send it back.  As-is, it's nearly impossible to do right-click moves using the right pad button.  It becomes a 2-handed operation, one to hold the upper right button, and the other to do the dragging.
    Solved!
    Go to Solution.

    ok. 
    Control panel, "Programs and Features"   Uninstalled Thinkpad Untranav Utility  and driver items.
     Rebooted.  Confirmed that these applications ar eno longer present.
     Checked Device Manager, under Mice and Pointing Devices.  All it shows there is "PS/2 compatible Mouse"
    Results:
    1. Right click with touchpad right switch now generates a right click.
    2. Left, and right click drags with the touchpad lower switches now work, but there is a tendency for the finger touch to move the cursor off target before the press is completed.
    Suggestion to Synaptics.
    When pressing one of the touchpad switches, there will always be a finger touch on the touchpad sensing surface first, which will probably have a negative effect.
    To avoid this, any initial touch in the lower left or right areas should be ignored, and any cursor motion generated by that touch should be undone as soon as the switch closes.
    Downloaded latest driver and utility. 
    Installing driver (15.3.6.0 / 6hgx40ww) first, and restart.
    Result for driver reinstall:
    1. Right click with touchpad right switch works
    2. Right click multiple swipe drag works.
    3. Left click drag works, but ONLY if the clicking finger is touching the active area of the pad.  If you click too close to the edge, or use an object to press the switch, then the switch closure itself is not recognized.  The same issue exists for right clicks.
    Actually the behavior seems to be reversed now,  You MUST have a finger touch in the areas that prevented movement earlier to register the click event,  If you press the switch too high, or too low, or with an object, such as pencil eraser, then there's no click.
    So, with the new driver. I get acceptable dragging action as long as my finger isn't too far out of position.
    However, doing things like dragging a scrollbar with these buttons is still very frustrating, since the cursor tends to move off target before the switch closes.  This can be avoided by bringing the finger down onto the pad very quickly, to close the switch before any movement takes place.  A slow press will almost always move the cursor before the click.
    Installing the utility (7VGQ14WW) next.
    Still works, and the initial lag when trying to drag things is now gone. 
    So, aside for the cursor to move while clicking, I'd say the problem was fixed by the new driver. 
    Thanks for the fast responses, and to the driver devs for fixing it this quickly.

  • Can I update more than one iPad and iPhone from the same MacBook pro?

    Can I update more than one iPad and iPhone to ios 5 from the same MacBook pro? Our family has one MacBook pro and several iphones and ipads.  No one wants to lose their iTunes music or contact list or calendars.

    Yes, but you will want to think it through before you do it.
    The computer will become the "master" device, holding the definitive collection of music, photos, contacts, etc., and each iPad or iPhone will get a copy of what's on the computer. So if  everyone has different collections of music or photos that you all want to keep separate from each other, you'll want to set up different accounts on the MacBook Pro. To do that, go into "System Preferences" and click "Users", then click the "+" to create a new account for each person who needs their own set of files.
    That way you can each log in to your own MacBook account before you sync your iPhone or iPad, and everyone has their own copy of iTunes and their own iPhoto. If you happen to plug in an iPhone while logged into someone else's account, you just click "don't sync" (the 1st time only, it will remember after that). Sharing the same files becomes tricky, so this is only the best method if you want to keep things 100% separate.
    On the other hand, if you all have your music and photos mishmashed together on the MacBook anyway or just don't care about keeping things separate, just go ahead and sync your iPhones and iPads without setting up new accounts. But in this case, you should create playlists and photo albums in iTunes and iPhoto. Then plug in an iPhone, click on it's icon in iTunes, and change the settings for Music, Photos, etc to only sync the playlists that you want on that device. Repeat for each one. They'll all remember their own settings, and continue to sync with their designated playlists or albums.
    What you cannot do is use more than one computer with a single iPhone. That will wipe out the music and photos that were on it already, replacing them with the ones on the second computer.

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • Can't I get my old iTunes that I have purchased downloaded from Apple?  I don't have the old computer anymore.  Also, is there a number to call if I think I have more than one account and would like them to consolidate my accounts?

    I have two problems:
    1.  I no longer have my old computer and want to download the iTunes I have purchased in previous years.  Aren't they all in "the cloud?"
    2.  I think I have more than one account and would like to get them combined.  Is there a good number or email to Apple that I could get that done?
    THanks!
          SHawn

    It has always been very basic to always maintain a backup copy of your computer.  Have you failed to do this?
    You can redownload some iTunes purchases in some countries:
    Download past purchases - Apple Support
    As provided, you cannot merge accounts
    Sorry

  • TS4436 How do I select more than one picture and send them all to Facebook on my iPhone 4s with iso7?

    How do I select more than one picture and send them all to Facebook on my iPhone 4s with iso7?

    Hi, I want to thank you for all your information regarding my questions about sending more than one photo to Facebook. I did have to stop in at Verizon (where I bought my iPhone) to find out why I did not have a choice to choose Facebook with the export icon. The tech had to go into my setting and enable Facebook to recognize my iPhone. When I upgraded to iso7 somehow it could not recognize Facebook. Once he did this for me I was able to follow your advice and your answer solved my question. Thank you

  • How can I use more than one iphone and keep contacts separate?

    How can I set up more than one phone and keep our contacts and messaging separate?

    Use separate Apple IDs for iCloud on each phone.

  • Adding music to more than one slide and not the entire presentation

    I love the way Keynote looks and behaves, but it fails to compete with PPT on certain aspects, such as adding the same audio track to more than one slide and NOT have it play for the entire presentation. Using PPT (and I hate PCs!) you can have a track play for "n" number of slides. I'm frustrated that I cannot do this with Keynote! I don't want the track as a soundtrack for the entire presentation. I want to add another audio track to, say, the last two or three slides only and something else for all the other slides. I looked through the user manual, forums, etc. and found that I can only add a soundtrack to the entire thing or a different audio to only one slide.
    Question: What if I cut (that last two slides) and paste the the slides as a new Presentation with its own soundtrack, then reincorporate that back and paste it into the original presentation? Will that work or will the original soundtrack take over the entire presentation again?

    Anyone remember Claris Works for Mac back in the early 90s? Now, that was a gem! What were they thinking when they got rid of that one (and replaced it with AppleWorks!)?
    Good point, but one which Apple has heard a zillion times, and so sadly chosen to ignore. The really heartbroken among us remember AppleWorks from the mid-'80's, the world's first integrated suite, then ClarisWorks, then AppleWorks; and, of course, Beagle Bros. and BeagleWorks. But since we old f*s are dying off, those complaints will eventually stop. +Sic transit gloria mundi.+

  • Posting topic to more than one thread and in different categories...

    Is there anything in the TOU we can "refer" to when users post the same topic in more than one thread and to add to that, more then one category? Case in point: http://discussions.apple.com/thread.jspa?messageID=8806009#8806009 (This is just one example)
    Limnos had a valid point. If we had a section in the TOU we could copy/paste from, I think it would help if we could refer to authority, ie., TOU.
    Thanks!
    Carolyn

    I wouldn't get into too much of a flury about that with end users. Notify as needed and let the moderators decide if it needs to be deleted. A good rule of thumb is you want the discussions to have:
    Everyone should feel comfortable reading Submissions and participating in discussions.
    That's from Terms of Use.
    And then there is:
    You agree to not interfere with or disrupt the Site.
    I'm seeing that logically one can conclude directing users not to crosspost may be considering interference with the site. I may suggest someone post in another forum if a solution is not transparent in the forum they are using, but that's as far as I'm comfortable bending the rules.
    I'm trying hard to keep my thumbs away from the keyboard when I see duplicate posts.

  • Simultaneously read more than one input and generate output

    Is it possible To simultaneously read more than one input and generate outputs depending on these inputs? If this isn't possible what is the best way to go about making some sort of timed loop that will read an input, read the next input, decide whether or not to output and so on. Hope someone can help. Thanks.Message Edited by Esmith13 on 05-25-2005 01:36 PM

    Hi,
    You should look at the synchronized examples for analog input and output that can be found in the example finder under:
    Help>>Find Examples>>Hardware Input and Output>>DAQmx>>Synchronization>>Multi-Function
    These will get you started to being able to handle multiple tasks at the same time.
    I hope this helps. Have a Great Day!
    George

  • I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

    I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

    Hi Eva B.,
    Please refer to the help document below:
    Adobe Store | Online order and payment FAQ
    Regards,
    Sheena

  • Can't add a goods-issue with more than one item and one is serial managed.

    Hi,
    We are trying to issue more than one item to a production order using the DI API.  If none of the items is serial managed, they all are accepted and the goods-issue Add is successful.  If one the items is batch-managed, the goods-issue Add is also successful.  I am able to add the goods-receipt if I it contains only one item and it is serial-number managed.  However, if I’m issuing more than one item and one or more of the items is serial number managed, then the DI API will not add the goods-issue.  The error message that appears refers to an item that is not among the items being issued.  The message is:
    -10: (IGE1.WhsCode)(line: 3), ‘Item ‘A00006        ‘ with system serial 1 is not in stock.’
    Again item A00006 is not even in the group of items being issued.
    The code I am using for the serial number part is:
    With oGoodsIssue.Lines.SerialNumbers
              .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
              .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
              .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
              .SetCurrentLine(n)
              .Add()
              rs.MoveNext()
              n += 1
    End With
    The rs is a recordset that the code is looping through as the serial numbers are being added.
    The error message does not occur during this code.  It occurs when it tries to add the full goods-receipt.  Does anyone have any idea how I can fix this?
    Thanks,
    Mike
    Edited by: Mike Angelastro on Mar 31, 2008 8:43 AM

    Hi Mike,
    Try to do the ".Add" only if you need it. Doing a ".add" without assignation may cause the error you have.
    I guess your n variable start at 1 or 0, so you could put code like this :
    With oGoodsIssue.Lines.SerialNumbers
    if n = 0 then (or 1, also I don't the correct syntax of your programming language)
    .Add()
    end if
    .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
    .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
    .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
    .SetCurrentLine(n)
    rs.MoveNext()
    n += 1
    End With
    HTH
    Jodérick

  • I downloaded Adobe Acrobat X in 2010 and then a few years later I got a new computer and I would like to install the Adobe Acrobat X on my new computer but I cannot tell if I had more than one license and my Adobe account is not showing that I ever downlo

    I downloaded Adobe Acrobat X in 2010 and then a few years later I got a new computer and I would like to install the Adobe Acrobat X on my new computer but I cannot tell if I had more than one license and my Adobe account is not showing that I ever downloaded or ordered anything.  Can you assist?

    Download/install it from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html and activate it with your serial number.

  • How long does it take for the IOS 7.1 to finish updating? My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

    My phone has been plugged in to my computer for more than one hour and the status bar only shows about less than 1/4 completed. I have an iphone 5s btw.

    Depends on how strong your wifi connection is.
    you can try a reset hold down the home/sleep button together until you see the apple logo and then release.

  • More than one description Field

    Hi,
    Is it possible to have more than one field that can stores more than 255 chars?
    currently we have just one i.e. the "description" field at the bottom.
    There are different fields which store some data which could go above 255 characters.
    I don't want to use Notes.
    does anyone have any clever ideas?
    Thanks,
    Royston

    Thanks for your suggestions!
    We have 6 fields on Activities which are supposed to contain some text about the activities, this is easily above 255 chars. We may also have to report on these.
    This happens for only two types of activities, for the others we don't have these 6 fields.
    The thing is we need that text to be tied up to those particular fields, so we can report on them if needed.
    Thanks,
    Royston

Maybe you are looking for