Right-Click w/ Mighty Mouse issue
Alright, I set my mouse up right for the button being secondary and all that so that I can right click. However it only seems to work sometimes and on certain things. Is this normal? For example, when I right click a link in firefox it just opens the page. No right click menu. It drives me nuts. Or when I right click to try and copy highlighted text it won't do it. Grrr...
Any advice or is it just a bug?
Sarah
Nevermind. It seems I have to click the very tip of the right side of the mouse. Not easy when you just want to click in the middle of the right side.
Similar Messages
-
TS3048 Right click on Mighty Mouse and Wireless Keyboard are not working
I have a 24" iMac, early 2009 Lion,10.7.5. My wireless keyboard and mighty mouse are not working properly. Wireless keyboard- I can turn it on and it will ask me to pair it with the Blue Tooth. I cannot log the numbers in - I even tried logging them in with my wired keyboard device (which is an Apple keyboard).
My Mighty Mouse's right click stopped working as well.
I have gone through all of the troubleshooting steps-
New Batteries - Cleared Blue tooth preferences list, repaired permissions, Cleared cache, Made sure that the settings were correct ex: key was not checked on mouse, Removed both devises (keyboard, and mouse) from blue tooth and allowed them to be discovered again, PRAM reset, Hardware check/ reset, and lastly, Reinstall of OSX.
I am still having the same issue with both devices.
Thank you.This is why you should always have a wired keyboard and mouse as backups.
Try smc and hope for the best.
I'd also suggest pram reset but you need the keyboard for that. -
Need to right click a Mighty Mouse
I'm used to right clicking my mouse. I just got a new iMac and find the lack of right clicking ability most distressing!!!
Hello,
Check that you have "Secondary Button" set on the right hand side of your mouse:
Click to enlarge.
cheers
mrtotes -
I can't right click wireless mighty mouse
My wireless mouse works fine on the powerbook but will not right click on my ImacG5 with 10.4.9
Is it likely to be due to incompatibilities. I crashed the finder with control click on a regular basis until I removed stuffit plugins from my contextual menu folders in library.
DavidHello David,
Try a firmware update for the iMacG5 and see if that solves the problem.
http://www.apple.com/support/keyboard/
Scroll down... on the right side of the page is has the download for the update:
Keyboard/Mouse Firmware Update 1.1.
Hopefully that will get your MM right clicking with your G5.
Carolyn -
Right Clicking With Mighty Mouse
How would i go about right clicking?
Make sure that you are not touching the left side of the mouse when you press the right side.
-
When I log into Microsoft Outlook Web Access. I've always been able to use the right clicker on my mouse. Since I installed the new Firefox, I have not been able to use my right clicker. Any suggestions? Thanks.
== This happened ==
Every time Firefox opened
== I installed the new FirefoxPlease can you be more specific as to what the issue is, when does it occur? Any error messages? every bit of information would help.
-
Why can I no longer send links to websites? Clicking File>Send Link doesn't work nor does right clicking on the mouse. Both worked prior to Firefox 6. I also can't send emails to websites that don't spell out their address but instead say "to send an email click here". Everything works fine in Chrome and Safari but not in Firefox.
OK well after first reverting to an older version of firefox to get my right click menu options back I have since discovered one way that works but at a cost.
By using the addon menu-editor it is possible to move the EMAIL LINK button from the file menu to the (Main Context Menu) ie the "right click menu" BUT you will loose the file menu button as there is no way to clone the button and only move a copy. Bunch of clowns that decided to do this I really don't know what they were thinking. Very VERY stupid move.
Here is a link to the only option that works https://addons.mozilla.org/en-US/firefox/addon/menu-editor/
Can you fellows/chaps <!--buggers--> at least provide a clone and move option in the menu-editor? -
Windows XP Pro, SP3. Firefox 3.6.3. Ever since updating to this version a few weeks ago I can no longer do a right click of the mouse and check the properties of an active url link on webpages. I've always had the option before. I want this feature back!!!!
In Firefox 3.6 Properties has been removed from the right click context menu.
You can use ''View Image Info'' or ''View Page Info'' in the right click context menu to see the (image) properties.
You can use the above mentioned extension (Element Properties 6) to get that context menu item back.
See also Link And Forminfo: https://addons.mozilla.org/firefox/addon/6939 -
My bridge pause all the time. I have to wait 30 seconds after selecting a picture or click the right button of the mouse. I have installed a new windows 8.1, and a fresh CD6. But still these problems in Bridge. No problems in Photoshop. What to do
What is the problem:
When I choose a picture in Bridge I have to wait 20 till 30 seconds (sometimes more).
When I choose with right click of the mouse. I have to wait the same time.
When I choose the menu. Also
After opening the picture(s) in Camera RAW. There are no problems
In Photoshop there are also no problems. Everything works all right.
Only Bridge have these problems. But I can’t work with it.
My Computer
HP Z820 with double CPU Type Mobile Intel Celeron M, 2000 MHz
Nvidia Geforce GTX 980 card
System memory 64 Gb
Windows 8.1 Home Edition
All software is up to date, incl BIOS
DirectX 4.09.00.0904 (DirectX 9.0c)
Lots of space on my disc drives
Software: Adobe Master Collection. But only installed Photoshop and Adobe Acrobat
Installation done with my original DVD of Adobe. All software updated
But still problems
Software installed again (including Windows).
Now installed adobe from a download version from adobe.
Still the same problems
I have no illegal software!
Multimedia
Geluidskaart SB Recon3D PCIe Audio Controller
Opslag
IDE apparaat Standaard Dual Channel PCI IDE Controller
SCSI/RAID apparaat Controlefunctie voor opslagruimten van Microsoft
SCSI/RAID apparaat Intel(R) C600 Series Chipset SAS RAID (SATA mode)
SCSI/RAID apparaat Intel(R) C600 Series Chipset SATA RAID-controller
SCSI/RAID apparaat LSI Adapter, SAS2 2308 Mustang
Harde schijf ATA Samsung SSD 850 SCSI Disk Device
Harde schijf ATA SAMSUNG SSD 830 SCSI Disk Device
Harde schijf SEAGATE ST3450856SS SCSI Disk Device
Harde schijf SEAGATE ST3450856SS SCSI Disk Device
Optische Station HL-DT-ST BD-RE BH16NS40
Optische Station hp DVD-RAM GHA3N
SMART Status harde schijf Onbekend
Partities
C: (NTFS) 243668 MB (150173 MB vrij)
D: (NTFS) 122101 MB (65332 MB vrij)
E: (NTFS) 429244 MB (322019 MB vrij)
F: (NTFS) 429244 MB (243491 MB vrij)
Geheugencapaciteit 1195.6 GB (762.7 GB vrij)
Invoerapparaten
Toetsenbord Logitech HID-Compliant Keyboard
Toetsenbord Standaard-PS/2-toetsenbord
Muis HID-compliant Mouse
Muis Microsoft PS/2-muis
Netwerk
Netwerkkaart Intel(R) 82574L Gigabit-netwerkverbinding (192.168.178.37)
Netwerkkaart Intel(R) 82579LM Gigabit Network Connection
Peripherieapparaten
Printer Adobe PDF
Printer EPSON XP-950 Series
Printer HP 4730 PCL 6
Printer Microsoft XPS Document Writer
USB1 apparaat Texas Instruments USB 3.0 eXtensible Host Controller - 0096 (Microsoft)
USB2 apparaat Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #1 - 1D26
USB2 apparaat Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #2 - 1D2D
Van: station_two
Verzonden: maandag 13 april 2015 21:58
Aan: johan van der klaauw
Onderwerp: After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.
After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.
created by station_two <https://forums.adobe.com/people/station_two> in Bridge General Discussion - View the full discussion <https://forums.adobe.com/message/7434796#7434796> -
How do I right click using the mouse on the mac desktop ?
how do i right click using the mouse on the mac desktop
does this involve iPhoto for the Mac in any way?
the simple answer given no actual information is to press down on the right mouse button
LN -
How do I right click without a mouse?
How do I right click without a mouse?
If you don't like the two finger tap (I don't - it doesn't seem to work consistently) you can asign one corner as a right-click or simply use the control click with one finger on the bottom (which is what I do, usually - just a habit left over from the old days).
Clinton -
Cannot right click on wireless mouse after mavericks upgrade
cannot right click on wireless mouse after mavericks upgrade. please help!
Hey eedge520,
Thanks for the question. I understand that you are unable to right-click with your mouse after updating. Let’s check your mouse preferences, as you can enable this behavior in System Preferences > Mouse > Point & Click > Secondary Click
OS X Mavericks: Change keyboard, mouse, and trackpad settings
http://support.apple.com/kb/PH14317
OS X Mavericks: Right-click
http://support.apple.com/kb/PH14308
Thanks,
Matt M. -
السماح بالكتابة بحسب النطق الصوتي
I want to be all the downloads through the program IDM How do I add that option to download? Has already tried to right-click of the mouse?
''duplicate - ''Make sure that you have IDM 6.07 build 15?
* go to '''about:addons''' - extension and check that IDM CC is enable or not
* if all are up to date and enable, then IDM should start download autometically -
Hello, The scroll ball on my wired Mighty Mouse will not scroll up, I have checked settings in preferences, everything seems ok. While trying to scroll up it almost feels like it is dragging (the little blue scroll ball) Scrolling down or side way works perfect. Don't know if it is the actual mouse or a software issue. Any one with ideas??
Glad to hear that the cleaning worked for you.
As David said, the surface that you use the mouse on will affect the accuracy of the mouse. The optical sensor can be easily confused if the pattern is not consistent.
I have found that the right mouse pad can make a huge difference. It's the pattern that actually makes the difference. You could probably get great results just using it on a non-glossy desk.
Wood-grain or a flat textured color would be fine.
But, I've actually gotten the best results on patterned mouse pad.
The ones I use are round mouse pads, as thin (or thinner) than a sheet of paper), and have a pattern that optical mice like.
They are called "WOW!PAD"
The company that makes them is at:
http://www.microthin.com
My pad is "Dots 007" if you look at the pictures on the page at:
http://www.microthin.com/prod_wowpaddesigns.htm
You can read more about the pads by going to the following page, and selecting the different options in the selection box:
http://www.microthin.com/prod_wowpad.htm
I've found that it almost completely eliminated the pointer problems on my Microsoft Mouse, and 100% eliminated the problems on both my Apple Pro mouse and Mighty Mouse.
My Apple mice don't jump around at all now. So, give that a try. I think you'll be pleasantly surprised.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question. -
Installed snow leopard and the right click on my mouse no longer works. Any ideas?
I just replaced my hard drive and installed a clean copy snow leopard with all updates. The right mouse button (normal wired mouse that came with imac) with the menu drop down is no longer working. changed secondary button in mouse settings and got the right click menu but now when I right click the file or group of files are no longer highlighted. this *****. any ideas?? Between the hassle of replacing a hard drive, mouse problems, firefox, opera, office mac and elgato tv problems and issues im fed up.
Message was edited by: tele59Apple menu -> System preferences -> Keyboard and Mouse should give you controls over the mouse. If not, either Steer Mouse or USB Overdrive might give you better control.
Maybe you are looking for
-
Primary Key from Database Sequence
Hi, I have a form that has a master block(single_record) and a child block(multi-record). I am using Database Sequence for primary key. And I am not using any toolbar, instead using the default from FORMS. I want to keep this primary key field invisi
-
Date format when getting a PDF document with RESTful changes
Hi all, I have a simple document with a date concatenation (as a string) for DateFrom - DateTo (for example "1/4/2015 - 30/4/2015") When I am in WebI I can see it in this format, even if I export it to PDF or Excel. However when I open it using BO BI
-
Adding Query String Parameters to Table loadData
I am new to ADF/JDeveloper, so hopefully this is a simple question... I have created an ADF task flow containing a table of fake weather data. This data is loaded using a URL Service Data Control. The URL service takes a zip code as a querystring par
-
Can the OBI welcome/spash screen be replaced with a custom web page?
Thanks
-
hi in scripts in one window i have to fill with first day of current system year and last day of system current year . how to get it ? thanks& regards lakshmi