Right driver for a slide scanner?

I have a PF 1800 AFL scanner. I am trying to find the right driver to download so that I can use this on my MacBook Pro. Thanks for your assistance.

What did it tell you the reason it wouldn't allow it?
Was it something to do with not being an identified developer or from the Mac App Store? If so, then that is GateKeeper doing its job.
If you actually trust the installer you down loaded, you can right-click on it and choose Open. It will then let you authenticate to allow the installation to proceed.
If you don't want GateKeeper to do its thing, you can disable it in the Security System Preferences.

Similar Messages

Unable to install a software driver for Canon film scanner on mac OSX 10.6

I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

ICA driver for Canon MX512 scanner?

I've exhausted Canon Support, trying to get a Canon PIXMA MX512 multifunction printer/scanner/fax machine to work on my father-in-law's dual 2.0 GHz processorr PowerMac C5. They do have a printer driver, downliaded from their website, that allows it to work as a printer but the only driver for the scanner function is the TWAIN driver which only works on Intel processors. They suggested that I try the scanner using Image Capture, but Image Capture doesn't recognize the scanner. Canon does not have an ICA driver, and no plans to create one. The frustration is that both the Box and the Specification sheet says that the Minimum System Requirements for the MX512 on Mac is "Mac OS 10,5,8, Intel Processor, PowerPC G5, PowerPC G4 (867 MHz or faster) 512MB." Unfortunately on their website ONLY there is an "additional disclamer" footnote 18 which reads "System requirements vary by application"... a "cop-out" which really means that all the functions may not work on your computer, which means if it doesn't work, you're stuck with it! Even the Canon support tech was frustrated after an hour working with me and consulting his co-workers and reference sources. So.... does anyone out there know of an ICA scanner driver, canon or 3rd party that might work for this Canon MX512? The frustration level is high.....

I'd see if the older version of VueScan works for the MX512, it mentions the MX510...
http://www.hamrick.com/vuescan/canon_mx510.html
Free to try it...
http://www.hamrick.com/#download
Hmmm, I have ViewScan 5.2.19 on my G5/10.5.8 & I don't see that version there!?

Driver for Dell A920 scanner/inkjet printer

Hello. I've inherited a cheap and cheerful Dell printer/scanner (model A920). I don't believe Dell ever made a driver for the Mac... what is the best third party or open source driver to get this printer hooked up to my Powerbook G4 (running 10.4.11) or our brand new Intel MacBook?
Thanks,
James

If you have a PC that you could hook the printer to, you can use this workaround to share it:
http://iharder.sourceforge.net/current/macosx/winmacprinter/

Windows 7 driver for Scanjet 6300c scanner

Anyone have anything on a suitable replacement driver for the Scanjet 6300c Scanner for Windows 7 ?

Would you help to suggest any driver software for hpscanjet 6300c in my windows 7 pc

Windows7 driver for hp 3970 scanner

can anybody help me with a driver for my fp 3970 on a windows7 computer

Hi,
If you only need basic scan, Vista driver will work:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=298548&swLangOid=8&swEnvOid=2100
Otherwise you have to buy new scanner.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

What is the right driver for iPhone 4 for iTunes 10.2.1.1

I upgraded my itunes to 10.2.1.1 on Windows 7 and tried to upgrade my iPhone IOS to 4.2.1. Unfortunately, the apple recovery iBoot driver will not load and my iPhone has an USB cable icon pointed to an itunes icon and will not start.
I see four drives Apple recovery iBoot USB driver 6.0.9999.52, 6.0.9999.53, 6.0.9999.55 and usb composite. All these drivers failed to load into Windows.
What is the Apple recovery usb driver and how do I get the driver loaded so, y iPhone can start up?

Jac -
--Tom asked "what format are you capturing?"
1. What camera (that the Church owns?) are you using now? Does it record to a small Memory card or to tape? -- What make & model is it? HD or SD?
2. If the camera is storing to a media card, you can (a) copy the contents of the card to a thumb drive attached to any laptop at the church, take it home and import into Final Cut X there or (b) borrow the media card(s) and take it/them home.
3. What laptop computer do you and/or the Church presently own? What is the operating system version? How much memory, size/type of internal Storage? Any external hard drive storage? You mentioned that you own a Mac Pro at home. What model? (Apple Menu/About this Mac/System Information) What are its specifications?
    Almost any computer would be able to simply copy files using the finder - without using Final Cut Pro X for capture at the Church.
One can purchase 128 GB., USB 2/3 thumb drives for about $60 and up.
    If your Church's camera is a Tape based Camera, then you could just take the tapes home. No? "Capture" at home. Yes?
   You are currently capturing to an esata drive? which drive? which model Macbook Pro do you own?
   Finally, is your Church going to be purchasing whatever new equipment that you may need?

I downloaded Mountain Lion and now can't find a driver for my scansnap scanner. They say I have to contact Adobe. True

I downloaded Mountain Lion. I love it..but now my Fujitsu Scansnap scanner will not work. Fujitsu says I need to contact Adobe for the driver. Yet Adobe doesn't list a driver, only the pricey upgrades. Is this true?

ScanSnap Manager Update : Fujitsu Global

Has Lion got a driver for HP 3570 scanner

Is there a way of using my perfectly useable HP 3570 scanner with Lion 10.7.5?

Try downloading this driver package: http://support.apple.com/kb/dl907
Let me know if that works for you.
Best of luck,
Kyle

Udev not loading the right driver for usbtmc device

I have a usb beam profiler and I'm trying to get it to work on arch linux. It works using NI-VISA, so I should be able to communicate with it using usbtmc. However, when I plug it in, it does not show up in /dev.
I think the problem is that udev is not loading the tmc interface driver when I plug it in.
Here's a snippet of the output from lsusb -v:
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
I believe that bInterface* should look something like:
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 3 Test and Measurement
bInterfaceProtocol 1 TMC
iInterface 5 TMC488
Is there a way to force udev to load the right interface? Or is the problem that I'm missing something from my kernel?

Could you post the entire output of lsusb -v for the device?
Bus 001 Device 013: ID 1313:8019 ThorLabs
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1313 ThorLabs
idProduct 0x8019
bcdDevice 0.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
What device node name are you expecting?
Not sure, but probably /dev/usbtmc0
Is there a chance that it is being instantiated as a HID device? Does /dev/usbhid0 appear?
Nope, don't have a /dev/usbhid0
What does the journal say when the device has been attached?
I'm not sure what you mean, but dmesg says:
[ 6095.219400] usb 1-1.2: new high-speed USB device number 14 using ehci-pci
and udevadm monitor says:
KERNEL[6098.321484] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
KERNEL[6098.321887] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)
UDEV [6098.324333] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2 (usb)
UDEV [6098.325356] add /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0 (usb)

Need windows 8 compatible driver for F917500 Canon scanner

I have Canon F917500 scanner, which worked well with Windows XP. I need driver and software that I can use with Windows 8.1X64

Hi JFCdad,
There are not Windows 8.1 compatible drivers and software available for the scanner; please Contact Us for other options available to you.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Unable to update bootcamp and install/find right driver for windows 7 64 bit

I am trying to install windows 7 Enterpris 64 bit on MBA with i7, agter I downloaded the bootcamp windows driver while MBA was running Lion on a flash drive. after installing windows 7 tried to install bootcamp via flashdrive get error "not intended for the hardware" I tried to all boot cam version 3.1/3.2/3.3, tried the bootcamp with driver downloaded via Mac Book Pro which seems Ver 4.0 still no sucess. tried to install the driver missing PCI simple communication, some time trackpad freezes, and have to reinstall all over again, and some time unable to pass login screen as CTRL+ALT+DEL won't work, have to use onscreen keyboard to login. please help? thanks

ashfromwpg wrote:
I am trying to install windows 7 Enterpris 64 bit on MBA with i7, agter I downloaded the bootcamp windows driver while MBA was running Lion on a flash drive. after installing windows 7 tried to install bootcamp via flashdrive get error "not intended for the hardware" I tried to all boot cam version 3.1/3.2/3.3, tried the bootcamp with driver downloaded via Mac Book Pro which seems Ver 4.0 still no sucess. tried to install the driver missing PCI simple communication, some time trackpad freezes, and have to reinstall all over again, and some time unable to pass login screen as CTRL+ALT+DEL won't work, have to use onscreen keyboard to login. please help? thanks
You need 3.0 installed, 3.1 etc are updates, and they need something to update.
How do you plan on dealing with Firmware Updates without an OSX partition?

Windows8 driver for hp 7610 scanner

Any such driver exist? I had it workiing on a win Vista laptop but then then a disk update became necessary and my problems began.

Welcome to the forums NeilH1,
There is a full driver available for the Officejet 7610 Wide Format printer with Windows 8. If you are having an issue with the installation or using the printer, please let me know the details and I will do my best to help out.
Here is the link to the full driver download: HP Officejet 7610 series Full Feature Software and Drivers
Enjoy your Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HT3669 Dell 3115cn printer ... Do we have an update from Dell regarding Dell 3115cn update driver for using the scanner?

Dell 3115cn Multifunction Printer ... Does anyone have any information how to use the Dell 3115cn scanner on Mac OSX macbook pro? Or rather has Dell updated the driver permitting us to use the scan function via usb?

have a look @http://www.cpierce.org/?s=dell+3115cn&submit=
he made some interesting plugin, not sure about the scanner functionallity…

Trouble finding the right driver for my Epson R1800 for my Imac

No mattter what download I install (as well as the disc enclosed with Imac) I have been unable to get the exact printer driver description in the draw down window of the printer setup utility. Is there one available for the Epson Stylus Photo R1800 or not?
Imac Mac OS X (10.4.9)

I also have an Epson printer. You indicated that you already downloaded an updated driver from Epson's website. Did you also downloaded the one(s) that came w/the Epson CD? However, you did not mention that you repaired permissions & restarted after the installation.
If the above was not done, then I suggest that you do so. Hopefully, this should solve your problem.
I just checked the Epson folder in my HD & your model printer is NOT listed among them.

Right driver for a slide scanner?

Similar Messages

Maybe you are looking for