Right hand click issues with windows 8.1 after updates

I can no longer right hand click delete or open with right hand click, system stops working or seems to reboot

Try to boot into Safe Mode and uninstall the suspected updates. Reboot and recheck the issue.
You may also go for a System Restore-select any Restore Point when there was no such issue.
I also shall suggest you to download the
ShellExView  It is an excellent tool to view and manage all installed shell extensions. The rule is to disable non-Microsoft context menu handlers one-by-one and verify if the problem is solved.
If the above doesn't help then  run the System File Checker tool (SFC.exe) to scan your system files and to repair missing or corrupted system files.
S.Sengupta, Windows Entertainment and Connected Home MVP

Similar Messages

  • Can't pause flash with right mouse click on mac osx 10.6 after update from firefox 3 to 6

    After updating my firefox 3... to firefox 6 I can no longer right click in a flash video and pause it

    My camera is a 1Ds mk II..
    and for that one it says
    All versions tested. All versions tested. Supported only through Lightroom 4.1.
    however, it also says
    Windows XP, Vista, 7; Mac OS X 10.5 or 10.6
    which is plain wrong, because Canon never supported any drivers for Windows Vista or Win 7, not to speak of XP 64bit. (You cannot connect the camera via firewire, without the device drivers!)

  • Issues with my iPhone 6 after update ios 8.0.2

    LIst of issues after uodate
    1-Email comes back after I deleted them.
    2-Apps crash or do not respond
    3-Screen rotation not working properly
    4-Battery drain quick
    5- Using iphone get frozen
    6-wifi drop connection and bluetooth
    7- also gps for years since i am using iPhone provide wrong address directions.

    Hello hijasahmed,
    Thanks for using Apple Support Communities.
    I'd like you to please follow the troubleshooting steps in the article below to help resolve this issue with connecting to Wi-Fi on your iPhone.
    iOS: Troubleshooting Wi-Fi networks and connections
    Take care,
    Alex H.

  • Issues with sending text messages after updating to 8.1

    I having problems sending text messages after updating to 8.1, get a message saying Message Send Failure. I have an Iphone 5s.

    Hi CWH52,
    Thanks for visiting Apple Support Communities.
    If you have not been able to send text messages after updating to iOS 8.1, you can find some helpful troubleshooting steps in the "If you can't send and receive SMS" section of this article:
    iOS: Troubleshooting Messages
    The steps found here can help resolve many issues that affect your ability to send text messages.
    All the best,
    Jeremy

  • [SOLVED] Dual boot with Windows 8, problems after updating Windows

    Hi all,
    I have been maintaining a dual boot of arch and Windows 8 for some time. I recently updated Windows to 8.1, and found that the update process had two side effects:
    1) The update added a new partition in the middle of my file table, so my /etc/fstab which referenced "/dev/sda6" was wrong because that partition is now "/dev/sda7."
    2) The default boot device was switched to the Windows Boot Loader instead of grub. But, this is not a problem because I can work around this by using the "Choose boot device" feature of my bios at start up.
    So, neither of these problems are critical for me at the moment. I can fix my fstab and just press a hotkey at startup.
    EDIT: I have avoided the /etc/fstab issue by referencing my partitions using UUID as specified in https://wiki.archlinux.org/index.php/Fstab.
    How do I set the default boot device back to grub? There is some weirdness here, I think windows is using UEFI booting and my grub uses the old booting system.
    Last edited by bjmnbraun (2014-05-14 19:00:36)

    Rex: I tried that command, got some warning messages regarding blocklists, but no dice.
    Loqs: You are right about windows using a ESP and UEFI while my linux is not booting using UEFI. My bios is configured to try "Legacy boot" first before trying UEFI. Getting linux to boot using UEFI seemed like a pain, so...
    I went into my BIOS settings and found that the Windows Boot Manager boot device was listed in front of my hard disk (which boots linux). I don't think this used to be the case, so something about the update caused my BIOS to reorder the boot devices (probably because the partitions changed).
    Switching my hard disk to be above the Windows Boot Manager in the boot device list now makes me boot into linux by default, and I can boot into windows by pressing a hotkey at bootup and selecting the windows boot manager.

  • Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

    I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

    I have called HP-Support and the answer was:
    «Thank you for contacting HP Active Chat Support.
    This is in continuation to our response with regards to your chat ID: 63381567
    As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
    Start the computer.
    Press the F10 key to enter the BIOS setup.
    Select Restore Defaults .
    Under Load Defaults , select Yes .
    Choose Save Changes and Exit .
    Under Save Changes and Exit , choose Yes .
    If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
    The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
    Open Control Panel .
    Expand View by: and select Large Icons .
    Click Administrative Tools .
    Double-click Services .
    Double-click Telephony .
    Under the General tab, expand Startup Type , then select Automatic .
    Click Apply , click Start , then click OK .
    Restart the system.
    If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
    The issue was not resolved.
    So I'm waiting for the release of the new driver...

  • Problems with compressing  files with right hand click. it does not work.

    Problems with compressing files with right hand click.
    I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
    I get a message: The content list cannot be created for compressing.
    I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix this

    Thanks I love my macbook!!!!
    I also got further problems such as copy-paste not working etc.
    so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
    thanks for helping though!

  • Itunes issues with Windows having to do with Apple's patent

    I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.

    I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
    I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
    I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
    How?
    Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
    Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
    Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
    Further down under "Privilege level" check off "Run this program as an administrator".
    Click "Apply" and "OK".
    Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
    Hope I helped!

  • Itunes issues with windows 8... laggy?

    anyone one else having abit a of laggy issue with playing music on windows 8?
    i just upgraded to windows 8 con. preview, and its great and fast.
    i use to have windows 7 and itunes never skipped a beat.
    i have a sony viao with an upgraded ram and ssd hdd.
    and its pretty fast.
    so i dont think its my computer and windows 8 seems to be fine.
    anyone else having this issue? but it only happens now and then.......
    NOTE:
    i have my music all copied to my sdd hdd aswell
    and thats all thats really on there as i have ext. hdd's.
    i have a average size library in itunes with around about 50gb of music.

    I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
    I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
    I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
    How?
    Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
    Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
    Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
    Further down under "Privilege level" check off "Run this program as an administrator".
    Click "Apply" and "OK".
    Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
    Hope I helped!

  • Is there a known issue with windows 8 supporting itunes?

    each time I update itunes I lose my itunes store connection and therefore can't update apps etc. Is this a known issue with windows 8 users?

    Yes. Some are complaining.
    Search iTunes.exe. RIght Click, Properties, Compatibility, Click Run this program as Adminitrator. OK.
    See if this helps

  • Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

    Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

    You are going to have to contact Adobe on this one. We are other users.
    Sounds like it's not even an Apple question? Not sure.
    But the Adobe program changed, nothing changed in iTunes, right?

  • Weird issue with Windows Server 2008 R2 Print Server

    I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server. 
    Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors. 
    We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
    After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
    to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems. 
    If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping. 
    Has anyone experienced anything like this? Any tips on how I could possibly resolve it? 
    Thanks in advance.

    Hi,
    According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
    fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
    >>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
    DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
    ipconfig /flushdns
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Where is the forum for Windows Update issues with Windows 10 TP 9926

    Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
    This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.

    Might try them over here.
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

    Hello SAP community,
    I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
    When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
    But when I click than on NWA (example), I am getting "http 500 server error".
    I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
    But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
    Than it is working without problems with Windows 7 and Internet Explorer.
    I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
    We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
    Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
    Thanks for your help.
    Best regards
    Carlos

    Hi all,
    I think I found the solution.
    The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
    That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
    When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
    Internet Explorer Options => Settings for compatibility view => Add domain
    Best regards
    Carlos

  • Major Issues with Windows XP and Sound Blaster Audig

    As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

    Thanks for the helpful reply Dan
    I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
    However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
    I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

Maybe you are looking for