Right Justification in File Content Conversion

I have a requirement where the data should be right justified in File content conversion of a Receiver Adapter .
For example it should be coming as " 5864" instead of "5864 ". Please help in completing this requirement.

Hi Srinath
AFAIK, there is no setting in FCC to achieve this. You can do this instead in the Message Mapping step by doing a right justify on that target fields.
You can search for plenty of solutions on the internet to perform a right justify and include it in a UDF.
Below is an example of a UDF of execution type single values with single input. It right justifies the String based on a total length of 15. You can change the field length according to your requirement.
return String.format("%15s", input);
Rgds
Eng Swee

Similar Messages

Encoding problem after File Content Conversion

Hi SAP gurus!
we're about exporting debitor data via PI into CSV files. Therefore we use a mapping to an intermediate structure. In the receiver file adapter a file content conversion is done into the target CSV format.
We have a lot of data with eastern europe characters. Right after the mapping, everything is fine. All characters are processed correctly. After the file content conversion, the files written on the target system contain "?" instead of the special characters.
Does anybody have any hint to fix this problem? We already tried to change the "file.encoding" parameter, but hasn't helped.
Thanks in advance for your support!
Cheers,
Matthias

Hello Satish,
thanks for your reply.
First, I have to explain, that the sender side isn't done by file adapter but IDoc adapter. So I cannot change the encoding on sender side.
Both on IDoc and file side, the data is ok. Only when inserting the file content converion, the files become corrupted.
Without using the FCC, tjhe target files are stored as UTF-8. When using FCC the files are stored as ANSI. (I tested this by opening the files in notepad and performing "Save As")
Do you have further ideas?
Cheers,
Matthias

Need help in file content conversion complex structure

Hi Guys ,
Iam new to this file content conversion , Please let me know whether below requirement is possible .if yes than how ?
Inbound XML file from Proxy
<Data>
<keyfield1>0011</keyfield1>
<keyfield2>0012</keyfield2>
<Keyfield3>0013</Keyfield3>
<field1>Test1</field1>
<field2>testfield1</field2>
<field3>0001</field3>
<Data>
<keyfield1>0021</keyfield1>
<keyfield2>0022</keyfield2>
<Keyfield3>0023</Keyfield3>
<field1>Test2</field1>
<field2>testfield2</field2>
<field3>0002</field3>
output pgp flat file .
pgp file format should be as below after file content conversion
0011|0012|0013|Test1||||||
0011|0012|0013|Testfield1||||||
0011|0012|0013|0001||||||
0021|0022|0023|Test2||||||
0011|0012|0013|Testfield2||||||
0011|0012|0013|0002||||||
thanks a lot .
Regards
Prabhu

Hi.
Try this.
First you need to use a message mapping and create a target structure to convert a similar output structure that do you want. like this
<Target>
-- Field1
-- Field2
-- Field3
-- Field4
-- Field5
-- Field6
-- Field7
-- Field8
-- Field9
</Target>.
Then map
keyfield1-> Field 1 ,keyfield2-> Field 2 , keyfield 3---> Field 3
map field1-> field4 .. for the others fields duplicate the Target node (right click) and map map field2-> field5 ..etc.
For the field 5 until field 9 map with constant ("'')
Then in you receiver comunication channel put simple parameters.
Target.fieldSeparator = |
Target.endSeparator = 'nl'
Regards.

Idoc 2 file - file content conversion in receiver

Hi,
My scenario is idoc to file.
if i want to use file content conversion at receiver side,
so i need to create record set according to sender side data type or receiver data type?
plz give some inputs reg. this.
Thanks

Hi,
There is problem while refreshing in sap xi also.
when i pass new parameter like 7 in my recordset structure,
it is immediately reflecting in CC monitoring.
error it is showing that '7'.
but if i remove that in record set structure
(after activating that in ID)
even though
if i stop and start my CC manually also,
still it is showing that error in CC monitoring
like '7'
basic concept of this file content conversion is
I have to keep at least field separator (ie 'nl' )for outer most node element ie Customer_copy and record set stru. as Customer_copy
is it right?
I tried my own way...still it is giving that error.
what could my fieldSeparator, endSeparator, for ur last case plz tell me?
Edited by: ruban R on Apr 22, 2008 3:01 AM

File content conversion on Sender Side

Hi,
I am doing file content conversion on sender side.when i am executing the scenario,i am getting the following error in sxmb_moni:
Invalid at the top level of the document. Error processing resource 'file:///D:/Documents and Settings/...............
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> DOC_HEADER ...
when i right click on the pyaload and select view source
its displaying the whole flat file with the following line at the beginning:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
i have given all the parameters correctly....
in sxmb_moni.....the error category is Mapping and the error id id EXCEPTION_DURING_EXECUTE
Please help me with this error.
thanks n regards,
anuradha

Hi !!
The best way to debug would be to add TRACE statements in your mappigs. In both Graphical and java Mapping.
Trace out the entire output of java mapping and see if this is the input that the next mapping expects.
For trace , http://help.sap.com/saphelp_nw04/helpdata/en/c8/98e7d5c1620642973565ea3dd319d1/content.htm
refr this links also
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Name expected
unsported character error in message mapping
Re: HTTP to RFC Mapping error:com.sap.aii.utilxi.misc.api.BaseRuntimeException:
Exception com.sap.aii.utilxi.misc.api.BaseRuntimeException
Re: Outbound error
Re: mapping error
error in file to file
have a look at this weblog on how to test your mapping
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Thanks !!!

File Content Conversion and Empty file issue

Hello,
The issue is :
I have configured a file sender adapter with file Content Conversion. I have 2 kinds of records Header and Items.
i have defined the 'Key Field Name' based on the first character of each line of my flat file and the values associated :
Header.keyFieldValue = 1
Item.keyFieldValue = 2
Flat file example :
1;Headerfield1;Headerfield2
2;ItemField1;ItemField1;ItemField1;ItemField1;
2;ItemField1;ItemField1;ItemField1;ItemField1;
2;ItemField1;ItemField1;ItemField1;ItemField1;
and everything works fine !
But now imagine you receive a bad file like this :
xxxxx;ohhohoh;llllll
y;sdfsdfs;zezerz;zerzer
e;zerzerze;zezerzerzer
The result is : IS receive nothing and no alert is generated ?!!!???
What i have seen is that the adapter doesn't find any corresponding value for keyFieldValue so it consider that the flat file is empty and i do nothing, the file is archived and that's all no alert is generated ????
But i want to receive an alert for checking that the processed flat file was not correct !
If anybody has an idea, it will be great !
Regards,
Vincent

Hi Vincent.
Sometimes it really #!@#%%#.. me off when customers excepts that XI will solve their whole organization interfacing problems (and the world hunger as well...:)...
even when it comes to the responsible systems that creates the file(sometimes with bugs and problems even before XI came to the org.).as in every developed application or out of the box one, the application has to take care of its outputs and deal with errors. when it cant deliver what other systems expects her to it has to inform some one...
When it comes to the Adapter frame work XI expects the system in its landscape to be responsible for the data they send (well formed and with the defined structure...IDocs,XML,flat files).
as mentioned in my colleagues previous postings you can take care of data verification during mapping and so..
I belive it is possible to monitor the incoming file before it is parsed to XML (not sure it is the right way to) and maybe we'll get a solution to that in the future (today we can monitor the comm. channel wether its configures well or not,maybe it will be possible in the future to alert when an incoming file is empty)
Regards.
Nimrod

Receiver File content conversion - NO Output

Hi, yesterday i posted already to this topic but i chose to make a new thread.
I have an IDoc2File Scenario where i put the generated File to the filesystem of the XI-Server.
I try to do a file content conversion at the receiver side. I already read several blogs and also the official documentation (which is kind of bad - because the arne't posted all supported parameters which could be used on the recordset)
But anyway, the is a txt file written but without any details inside, no data is deliverd.
I do a message mapping and try to put only some data to the end-file.
here is my MT which i try to convert:
MT_Tafel
++TafelRecordset
+++TafelDetailsStructure
++++TAFIST
++++TAFSOLL
My parameters at the receiver communication channel are:
Recordset: TafelDetailsStructure
TafelDetailsStructure.endSeparator = 'nl'
TafelDetailsStructure.addHeader = 0
TafelDetailsStructure.fieldSeparator = ,
I have the right message protocol, i am trying to write a simple text file, i have no file-coding like ASCII, file is directly written into an empty one - and that's all.
The file is written but without data inside.
Do i have to announce the filednames i want to write? Like TafelDetailsStructure.fieldNames??
Do i have to add Parameters concerning the tags on the higher level, like TafelRecordset?
Is there a general overview about all parameters you can use on this file content conversion?
Can anybody help me with my scenario - i have no clue what i have done wrong. Communcation channel says everthing is fine, message succesfully transfered.
best regards, Jens

hi,
you need to mention the names of the field by
TafelDetailsStructure.fieldNames where u need to specify the filed names.
and also chk the similar thread
content conversion
plsz check the blog
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
check this like below,
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
hope this helps,
kvr
Message was edited by:
PrasadBabu Koribilli

Receiver File Content Conversion - Multiple Hier. Levels, Several Files

you can create several files using single message execution.
one source message structure and target multiple messgae types(0..1) occurance
and same thing you can implement in your Interface mapping.
1 -> Multiple Inbound interfaces
your target final strcture would be with Header,lineitems.
your JDBC->XI Intermedicate.
XI Intermediate ->XI final (this final structure will create the your file)
that way you can design your scenario.
Regards,
Venu.

Hello Venu, thanks for answering,
When you talk about intermediate structure you are referring to the approach I mentioned in the link above or to something that can be done using the same scenario structure I have right now?
I am going I little bit deeper in my scenario just in case I havent been so clear in my first explanation:
Lets suppose I have 3 stores: 1001,1002,1003
For each store there are 2 items: 999,888
So XI retrieves the information from the DB thru a stored procedure. This is the output:
STORE--PLU
1001--999
1001--888
1002--999
1002--888
1003--999
1003--888
Please note the information is coming in a flat structure. In the beginning I tried to separate it into several outputs (selects) as shown below but I relaized that was not possible to be handled by XI:
STORE--PLU
query 1
1001--999
1001--888
query2
1002--999
1002--888
query
1003--999
1003--888
That would have been the best approach as I would have generated one single file for each message and thats it, but unfortunately, Xi does not work that way with MSSQL Queries. So I had to made something up based on the answers I got from the SDN experts (Link is below in first message). There was when I used context handling for generating the structures myself within one single message.
In the scenario shown above I would have just needed to generate the following structure for creating messages from the source:
Level1: Main Node
Level 2: Header
Level 2: Body
But now, As I am forced to generate my 3 structures within 1 single message, I had to insert one more node to wrap header and body in per iteration (as a file would do):
Level1: Main Node
Level2: File
Level3: Header
Level3: Body
And that is the problem I am asking help for, that allegedly, XI File Content conversion can just handle up to 2 levels.
Thanks again for answering Venu.
Regards.
Edited by: Anibal Granado on May 12, 2010 11:34 PM

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like %store_code%_%current_date%_sitemaster.xml , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,we have to suppress the current_date node of the xml content . i have tried to suppress the current_date using these DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

File Content Conversion Problem

Hi
I have a flat file having 10 fileds with fixed length of field 7 characters
abc bcd dce cef ecf fgi
123 234 343 233 434 343
322 222 222 222 222 222
+++++++++++++++++++++++++++++++
XML CODE FOLLOWS
+++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_send xmlns:ns0="http://OTO-Continue.com">
-<SEND>
 <abc>343</abc>
 <bcd>343</bcd>
 <dce>434</dce>
 <cef>3434</cef>
 <ecf>343</ecf>
 <fgi>434</fgi>
</SEND>
</ns0:MT_send
As per the client req I'm going with FCC. The file is picking fine with the FILE. But not picking with the FCC.
The parameters which I gave are as follows.
SOURCE I feel it is fine since file is picking fine and keeping the same for FCC also.
PROCESSING
QOS -- Exactly Once
Poll Interval -- 10
Processing Mode -- Delete
Empty-File Handling -- Process empty files
CONTENT CONVERSION Parameters
Document Name -- (am giving sender data type name) DT_send
Document NSpace -- http://OTO-Continue.com
Recordset Name -- SEND
Recordset Structure -- SEND,*
Recordset Sequence -- Ascending
Recordset per Message -- 0
And in the table the parameters am settings are
SEND.fieldNames abc,bcd,cde,def,efg,ghk
SEND.fieldFixedLengths 7,7,7,7,7,7 (because each and every field has 7 characters)
SEND.keepIncompleteFields No
SEND.fieldFixedLengthType char
SEND.fieldContentFormatting trim
SEND.fieldEndSeparator 'nl'
This was the configuration. But this is not working I monitored the Communication Channel and file is not reading and not getting deleting.
What actually went wrong in above configuration. Why it is not working.
Thanks.

Hi Swarna,
CONTENT CONVERSION Parameters
Document Name -- ?
DocumentNSpace -- ?
Recordset Name -- ?
Recordset Structure -- ?
Recordset Sequence -- Ascending
Recordset per Message -- ?
Document Name - <Message Type> eg:- (MT_ABC)
DocumentNSpace - Name space of your MT
Recordset Name - The root node( Which has one occurence)
Recordset Structure - The parent node of the fields(can have multiple occurences)
Recordset Sequence -- Ascending
Recordset per Message -- 1/* (No.of records per each record set)
In your structure
+++++++++++++++++++++++++++++++
XML CODE FOLLOWS
+++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_send xmlns:ns0="http://OTO-Continue.com">
-<SEND>
<abc>343</abc>
<bcd>343</bcd>
<dce>434</dce>
<cef>3434</cef>
<ecf>343</ecf>
<fgi>434</fgi>
</SEND>
</ns0:MT_send
There is no root node, so in your FCC you need to mention your RecordsetName and you can ignoreRecordSetName in result structure. Check the following blog simulates your requirement.
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
Regards,
Prasanna

Problem in file content conversion from XML to CSV

Hi Experts,
I am finding problem in file content conversion. I need to convert the following XML file into CSV file:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_CROSS_REF xmlns:ns0="urn:dabur:idoc2file:pos">
 <Update_type>2</Update_type>
 <PLU>00000000</PLU>
 <Cross_ref_PLU>7777777</Cross_ref_PLU>
 <Capture_PLU />
 <Package_size />
 <Package_desc />
</ns0:MT_CROSS_REF>
The output file data has to be like:
2,00000000,7777777,,,,
The problem I am facing is while specifying the content conversion parameters in communication channel i dont know what recordset structure i should mention as all the records are directly under root. If I mention recordset structure as "ns0:MT_CROSS_REF" and parameters as
ns0:MT_CROSS_REF.fieldSeparator ,
ns0:MT_CROSS_REF.endSeparator 'nl'
i get error in communication channel monitoring and no file is posted.
Please help me as to what correct parameter i should mention in my case.
Thanks,
Regards,
Yash

Hi Chirag,
I cannot change the xml file as it comes after mapping idoc to a message type. How can I add ROOT in the xml? My message type is like MT_CROSS_REF and it has those 6 fields as in the XML (Update_type, PLU etc.). I do the mapping of these fields from a IDOC and get the XML.
I hope you got my point.
Thanks,
Yash

Complex file content conversion in case of CSV file

Hi Friends,
What you see below is generated from Excel i.e excel file saved as CSV file. This file i need to map in XI.
Problem is i have to take only the data and not the header part.
for e.g in this particular line
Employee ID          :,,E00315
I need only E0315 and not the header value. Similarly i have to find some solution to map all the required data.
Please suggest me how to use file content conversion in such scenarios.
Solution is required on top priority. Points will be immdly rewarded.
Thanks & Regards
K.Ramesh
,,Time Sheet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,Ref. No: T-PRO-01-011,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,Page No.: 01,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Employee ID          :,,E00315,,,Sale Order No / Line Item :,,,SO123456,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Employee Name    :,,K.RAMESH,,,Client Name                         :,,,NCLIENTELE,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Month / Week        :,,Jul-08,,,Project Name                       :,,,Internal Project,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Sales Team            :,,,,,Project Role Start date      :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Location                   :,,BANGALORE,,,Project Role End date         :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Sl. No.,Date,Day,AA Type, Task Description,,,,,No.of Hours,Remarks,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,7/1/2008,Tue,0814-Talent acquitision,task 1,,,,,12.00,rmk 1,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
2,7/2/2008,Wed,0814-Talent acquitision,task 2,,,,,10.00,rmk 2,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
3,7/3/2008,Thu,0814-Talent acquitision,task 3,,,,,12.00,rmk 3,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
4,7/4/2008,Fri,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
5,7/5/2008,Sat,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
6,7/6/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
7,7/7/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
8,7/8/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, , , ,,,,,,,,,,,,,,,,,,,,
9,7/9/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
10,7/10/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
11,7/11/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,, , ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
12,7/12/2008,Sat,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
13,7/13/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,
14,7/14/2008,Mon,0900-Paid leave,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15,7/15/2008,Tue,0900-Paid leave,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
16,7/16/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
17,7/17/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
18,7/18/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
19,7/19/2008,Sat,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
20,7/20/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
21,7/21/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
22,7/22/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
23,7/23/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
24,7/24/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
25,7/25/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
26,7/26/2008,Sat,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
27,7/27/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
28,7/28/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
29,7/29/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
30,7/30/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
31,7/31/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Prepared By:,,,,,Approved By:,Company Project Manager,,,,Client Project Manager,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Name,,K.RAMESH,,,Name,YYY,,,,ZZZ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Signature,,,,,Signature,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Date   ,,31.07.2008,,,Date           ,31.07.2008,,,,31.07.2008,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

Hi,
In this CSV file, what all i need is the value E00315 after the label Employee ID. I used in FCC the parameters u asked me to do. Also in the Document Offset i gave value 3 so that the first three lines are ignored.
1,,,Time Sheet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,,,,,,,,,,,Ref. No: T-PRO-01-011,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,,,,,,,,,,,Page No.: 01,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,Employee ID          :,E00315
But still i am getting the error
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 4 according to structure 'tims_header':java.lang.Exception: ERROR in configuration / structure 'tims_header.': More elements in file csv structure than field names specified!
Please help.
Thanks
Ramesh

Problem with File Content Conversion

Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PM

You will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

Right Justification in File Content Conversion

Similar Messages

Maybe you are looking for