Right Justify The Web Page

Hello everyone ,
Pls help me as i am new to this technology and have just
started my career . I hav created a web page in fla and whenever i
run the swf it is slightly left intended and a lot of white spaces
occupy the right side of the swf as compared to the left side . Any
kind of help will be highly appreciated . Thanx in advance ......
Tanny.

is this related to the stage in flash or the flash movie in
the html page? sounds like you are
referring to the white space that is the stage in flash -
Ctrl + J will allow you to modify your
width and height - perhaps you just need to correct the width
(flash crops from the right side and
bottom).
But you title seems to relate to positioning of the flash
movie inside an html page.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
putulu wrote:
> Hello everyone ,
> Pls help me as i am new to this technology and
> have just started my career . I hav created a web page
in fla and whenever i
> run the swf it is slightly left intended and a lot of
white spaces occupy the
> right side of the swf as compared to the left side . Any
kind of help will be
> highly appreciated . Thanx in advance ......
>
> Tanny.
>

Similar Messages

From time to time Firefox will not allow me to scroll down a web page, when I scroll down it will jump right back to the top of the web page. Any ideas?

Sometimes when on firefox when I try to scroll down a web page it will immediately jump right back to the top of the web page as soon release the mouse button. When it starts happening it will do this on all open tabs on all web sites.
Just closing Firefox and reopening it does not help, only way I have found to fix this is to reset my computer.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
You can check for problems caused by a recent Flash 11.3 update and possibly downgrade to Flash 11.2 or 10.3.
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
*https://support.mozilla.org/kb/flash-113-crashes

FF not printing right hand side of the web page using MAC OSX

FF is not printing out the right hand side of the web page. 1/2 to 1 inch i text is just cut off. Never had a problem in the past with this. Just happened, I believe after I upgraded FF. I am using MacBook Pro OSX.
== This happened ==
Every time Firefox opened
== I believe after I download the new FF update

Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.4; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
I have had problems with Firefox printing pages through most of the Firefox versions. I have tried printing in different ways to no avail.
Among my attempts:
printing to pdf, printing selected text, scaling down the page, using the print mode if the art. offers one. None seem to fix the problem.
Not only does the right margin text get cut off but oftentimes only the first page prints, the rest of the article doesn´t. It just happened again so I went to Safari and the problem disappeared. I believe there´s a serious problem here.
Below see a shot of what the preview of a 12 page article becomes when printed.
http://www.npr.org/templates/transcript/transcript.php?storyId=128222247

I am connected to my remote server and "put files" but the web page files do not update, whats going on?

I really can't figure this out:
So I use a different computer at school for web design, I bought Dreamweaver to work on it at home, I get the files fine from the server that I uploaded at school but then I make changes at home computer and connect and "put" them and I check online and the web page doesn't change one bit.
I don't have the exact file extensions from the computer at school but when I connect and get I have a similar folder(s) set up and then it downloads them into Dreamweaver file manager box and makes the folders there I downloaded. The site shows up fine in Dreamweaver after I "get" so great I thinking.
But... not so fast, I change the page in Dreamweaver, preview n a browser and look right on so I "put", connect to server and upload. Then I check online an its still the same I uploaded the CSS and HTML and dependent files by dragging over and also using the up arrow "put" as well but nothing changes on the web page online.
What is happening here I am so confused?
Thanks a bunch, I mean I can still preview as I go but I really curious why my "put" files don't change my web page like at all!

Have you tried refreshing the browser, or deleting the browser cache?

How to check the properties or the source file or the HTML coding of any particular link on the web page?

Earlier when I wanted to see the HTML coding of any link on the web page, I was able to see it but now I am not able to do that. Like earlier I used to right click on the link and there was an option of "View Properties" through which I was able to view it but now no such option is coming. Can you please help me out with this as I am facing many Problems?
== This happened ==
Every time Firefox opened
== from around 1 month

Install the extension at https://addons.mozilla.org/en-US/firefox/addon/14228 for that.

Google search disable the web page, how to get it back?

When i do a Google search using the safari option up right, the web page turn grey but sont comme back available. I need to reboot the iPad.
Any tricks?

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).
You see the orange Firefox button when the menu bar is hidden
*In current Firefox versions it is possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar to make the (orange) Firefox button appear.
*Tap the Alt key or press the F10 key to bring up the menu bar temporarily if you need to access a menu on it.
*Go to "View > Toolbars" or right-click the menu bar or empty space on the tab bar to select which toolbars to show or hide (click on an entry to toggle the state).

Will the Web Page Composer meet the blogging need?

Hi all (especially SAP-people)
My question is rather simple:
Will the Web Page Composer meet the blogging need?
As I can understand blogging features should come with the Web Page Composer unrestricted shipment from Ultimo September/Primo October. Is that true? If it is true, how much customization will it take to enable the blogging feature?
Kind regards,
Martin

Hi Martin,
As for the confirmation I am not the right to help - as for the details on bloggin-like capabilities I believe that the following TechEd sessions touch on that (among other subjects):
<a href="http://www.sapteched.com/usa/edu_sessions/session.htm?id=173">UP214 SAP NetWeaver Portal: Roadmap for the Next 12 Months</a>
<a href="http://www.sapteched.com/usa/edu_sessions/session.htm?id=282">UP218 Workspaces for Organizations, Teams, and Individuals</a>
In addition to this I assume it should be possible to create Web Forms based on WPC that could be used for blogging-requirements: http://help.sap.com/saphelp_nw70/helpdata/en/45/fef92d98f13830e10000000a11466f/frameset.htm - I suspect some kind of collaboration is needed in addtion to this.

Configuring Remote Front Panels on a Real-Time Target,smart camera,but there is no image in the web page.

I do see the web page, but the image itself is not loading.i know a problem is with the installation of the LabVIEW ActiveX plug-in or the IMAQ ActiveX plug-in. The LabVIEW ActiveX plug-in is required for ALL remote front panel viewing, and the IMAQ ActiveX plug-in is needed for VIs that use the Image Display. how can i do ?where can i get the the IMAQ ActiveX plug-in. help me！

Got it working, after much experimentation. Seems to require installing exactly the right combination of items on the RT target, as some items (web services? web configuration? the "application web server"?) apparently run a separate web server - or instance of the web server - on port 80, which prevents remote front panels from being served on that port.

Accessing the Oracle messenger through the web page

I don't know this is the right forum to ask about the doubt on Oracle Messenger .
I want to invoke a messenger chat window by clicking on a link in the web page .
In AOL it is possible using the link
Suneesh
Clicking on the link the chat window to suneesh will open .
Similarly can I invoke the Oracle messenger chat window ??
Thanks,
Suneesh

The link is href=aim:goim?screenname=suneesh
Thanks
Suneesh

Safari lion has small window that scrolls up from the bottom of the web page

Since up grading to Safari Lion (6.0.2) I get this window creeping up from the bottom of the web page.
That little window asks "searching for ....what ever I've typed in my google search engine...." and slowely scrolls up from the bottom of the web page. If I click just right on it it goes away to reappear on the next web page. If I click anywhere on it though it redirects to a rxlist page or some health page etc. Not related to my search at all.
Also, since upgrading the following have been recurring and prominate pain in the necks
1) I can't scroll down on the page using my mouse. Only with the up and down arrows
2) Sometimes when I type a querrie into my search engine line at the top of the brower, it auto redirects to some radom website. Again usually rxlist or vibes caster shop.com etc etc. It does not happen 100% of the time but 80%
3) When I am typing in my search querries, I can't backspace to delete. I have to highlight and retype the entire search.
4) i know I'm going to sound crazy but if I search in google for "safari ... problems" etc. all problems go away and I can surf to my heart's content. It's like as soon as I start complaining it knows and auto corrects!!
FYI I always delete all history, and cache using the "reset safari, and the develop tab and then empty caches.
Do I have a virus of some kind? What do I need to do? Anyone have similiar problems?
Thanks a million in advance for any of your help.
Kevin

Check out TonyE's answer found here: 
https://support.mozilla.com/en-US/questions/804377#answer-158895
He pretty much says you should install the Status-4-Evar addon: 
https://addons.mozilla.org/firefox/addon/status-4-evar
Once you install it, check its options and there should be a setting to turn off that small popup box. And I don't think you have to do the about:config part, that setting affects other popups that you probably want.

Microsoft Word Documents Left Justified on Web Pages

I have a church web site created with iWeb 08. I've been taking sermon outlines from Microsoft Word, copying the text, and pasting it in iWeb. This has been working fine in the past. The Word formatting copies over fine and the indents show up correctly in iWeb and on the web pages being viewed with Safari, Firefox, or IE in Windows.
Within the last month, something has happened. All the sermons are now left justified on the church website, when viewed with any of the browsers. It still looks okay in iWeb 08 though. Has anyone else had this problem? If so, were you able to correct it?

A lot has changed with Apple's hosting servers and software in the last couple of weeks due to the MobileMe changeover and it's not surprising that some things don't work as they once did. It takes little effort to click on the text box in the iWeb page and select the justification you need.
Another way to add the Word page is to take a screenshot of it and add it as an image file. That way all browsers and platforms will see it exactly the same, particularly if you're using a non web safe font.
Web Safe Fonts
Common fonts to all versions of Windows & Mac equivalents
Safe web fonts
OT

I can't see the iViews or jpegs which I added into the Web Page with WPC

Hello,
I'm using Netweaver 2004's.
I created a Web Page in the Web Page Composer and in the Site Navigation a Navigation Node to this Web Page.
Then I added a jpg and an iView to this webpage.But I can't see this iView or this jpeg if i open the Web Page.
I'm superadministrator and i have the rights to watch this page
But if i click "Edit Page" i can see everything.
What can be wrong ?

Tobias -
I think Ursula is on the right track here.
I was having the same issue (not seeing iviews in the page - even in edit mode).
I think the solution (somehow) is configuring the initial permissions in the Security Zones.
The only problem is that the documentation is incorrect. The correction is in an SAP Note.
Below is the configuration (correction is bolded!):
Documentation says:
Defining Permissions for Security Zones
1. Navigate to Security Zones → com.sap.nw.wpc → wpc (not pagebuilder!). (The documenation says com.sap.nw.pagebuilder. This is incorrect!)
2. Define permissions for Web site owners and, if necessary, for authors.
a. From the context menu of the medium_safety folder, choose Open Permissions.
b. Give the wpc_editor_role role - or a user group - the permission End User.
You can leave the default entry for the Administrator column as None.
c. Choose Reset Child Permissions.
d. Choose Save.
3. Define permissions for users.
a. From the context menu of the no_safety folder, choose Open Permissions.
b. Give the everyone group - or another user group - the permission End User.
You can leave the default entry for the Administrator column as None.
c. Choose Reset Child Permissions.
d. Choose Save.
I made this change, and now I can see iviews in the page. I won't swear this is the solution, but that is the only change I have made lately.
Hope this helps.
BTW - this corrected setting of the security zones corrected other problems I was having. Before I did this, a user with the WPC role - but not super admin - could not edit pages from the published page (the Edit Page link at the top of the page in runtime). Now the user can.

Safari cutting off right side of web pages.

I have been using Safari on iPad to view web pages from my company's schedule bidding system. I have had no problems viewing these pages in the past, however now the right side of the web page is being cut off, I am unable to view information or use control buttons that are on the right side of the web page. I have several colleagues using safari on the iPad that are not having the problem so thinking it is a setting on my iPad and not the company website.
Any Ideas?

The Canon A630 ... (mainly because of the outstanding picture quality which you were able to show me, the variety of zoom levels, not to mention it's nearly half the cost). Although the other camera is a higher MP rating; that in itself didn't sell me on a newer model).

When Firefox 5 opens the web page is too wide for the window and only half is displayed. How can I correct this?

The web page is offset to the right so that only the left half is visible in the Firefox window. As soon as I start to re-size the window (bottom RH corner) the page snaps into place and all is ok. It only happens when I launch the browser.
I did not experience this with version 4.

The web page is offset to the right so that only the left half is visible in the Firefox window. As soon as I start to re-size the window (bottom RH corner) the page snaps into place and all is ok. It only happens when I launch the browser.
I did not experience this with version 4.

In the previous version i was able to close my mozilla and to open it again, the web pages which i was working with remained however i've tried many ways to have this advantage again but it is not working what can i do ???

in the previous Mozilla version i used to leave some web sites opened and when i start working again my Mozilla showed the web pages i was working with in that occasion, i have looked in the options menu but there is no way, perhaps it was an add-on and now it is removed??? i would like to have this advantage again in my Mozilla could it be possible?? thx!

Your webpages/tabs are still there. When you start firefox again, there is a "Restore Previous Session" icon below. If you click that, it will open up all your tabs again.
Or you could see this article for better understanding-
http://support.mozilla.com/en-US/kb/Firefox%20does%20not%20ask%20to%20save%20tabs%20and%20windows%20on%20exit?s=how+to+save+tabs&as=s#os=win&browser=fx4

Right Justify The Web Page

Similar Messages

Maybe you are looking for