Right Left or Left Right?
hi
I have been using my Audigy card with the break out front panel connectors for about 8 months.
I have now upgraded my PC and transfered my sound card.
On my first run with the new CD dri've I got an error mesage and good old Microsoft said that I should update all the drivers which I did....
Now with the new drivers installed 2 things have happened.
All the volume coming from the speakers is about 50% of what it was. I have changed every creative setting and every M/Soft setting but the sound level is the same. OK I can turn up my amp more but what has happened?
2 My left and Right channel have changed sides. When I play anything from my CD or DVD dri've Right is Left and Left is Right. [ I have some HI FI test discs so I know this is correct. When I plug in my MP3 player to the amp everything is OK as before.
So if I change my leads over from the sound card to the amp everything will be oK but all the old music that I have recorded will now be the wrong way round.
So what do I do?
Thanks
Nigel
I realise now that once you type numeric data in the cell (aligned with your tab), as soon as you leave the cell, Pages decides what kind of data you have typed and makes its own mind up about how to align it. Your best bet (and mine, since I have been struggling with this behaviour) is to use the Cell Formatting options in the Inspector, and format the data as Currency or Number, with 2 decimal places. Add the Accounting Style tick box and you get the Currency symbol at the far left of the cell and the number at the far right. By resizing the width of the cell you get pretty much the effect you want.
There is also an additional alignment option on the formatting bar at the top when you are in a cell which does 'Auto align table cell based on content'. That might be useful sometimes, too.
Similar Messages
-
Hi,
The Safari anchor problem is back! But now for using an anchor from the left to the right and visa versa (it is for a website design).
Apple solved the problem for using the anchor from the top to bottom and bottom to top but NOT from the left to the right and right to the left.
I test it in several browser (Firefox, Chrome, Opera, IE8, even in IE7 is it working ;-) but not The Safari of the Big Apple!!!
You can test it here: http://www.douma.biz/anchor_problem_safari/
I put a little script in it so it is going smooth to the right and left. It is also not working without the script, so that is not the problem.
You can test it in: Firefox, IE8, IE7, Chrome, Opera etc. But Safiri is it not working!
So can somebody help me? I tried the max-height, max-width, with and without overflow-x hidden, etc etc. but it is still not working in Safari.
Best regards,
StephanieIs it again a bug???
-
Left table data Right table multiple returns
Hello all and thank you for taking the time to help.
I have a left table and right table I am querying from 2 remote hosts. The information in the left table is unique and has everything I need except for 2 fields; the information in the right table can have multiple rows for the same identifier. I am trying to get the latest rows information on the right. This is a snapshot of the tables:
Employee Table
Emp_num Emp_Name Emp_Store Emp_Category Emp_Location
W561789 Chris R79 Sales 98-778-77
W571779 Charles R81 Sales 87-988-98
W561874 Sam R79 Management 76-977-97
W561875 Tod R79 Sales 98-778-77
Customers Table
Emp_num Wait_Time Shipment_Status Shipment_Date
W561789 1
W561789 Shipped 2/28/2011
W561789 On_Order 2/27/2011
W561875 On_Order 2/27/2011What I am trying to pull is specific information from the Employee table, and only the most recent matching record from the Customer table. My query looks something like this (it doesn't work, or it takes a really long time to run)
SELECT
D.EMP_NUM, D.EMP_NAME,D.EMP_STORE, D.EMP_CATEGORY, D.EMP_LOCATION, M.SHIPMENT_STATUS, M.WAIT_TIME
FROM
DB1.TABLE1@HOST_A_LINK D,
(SELECT EMP_NU, SHIPMENT_STATUS, WAIT_TIME,
ROW_NUMBER() OVER(PARTITION BY EMP_NUM ORDER BY SHIPMENT_DATE) rownumber
FROM DB1.TABLE10@HOST_B_LINK) M
WHERE D.EMP_NUM=M.EMP_NUM
AND rownumber=1
AND D.EMP_STORE='R79'
AND D.EMP_CATEGORY IN ( 'Sales',
'Management',
'Supervisor')
AND D.EMP_LOCATION IN ( '98-778-77', '87-988-98')thanksJust to close the loop on this question, I figured it out. I had to move the ROW_NUMBER() alias outside the scope of the WHERE clause. The query looks like this:
SELECT
D.EMP_NUM,
D.EMP_NAME,
D.EMP_STORE,
D.EMP_CATEGORY,
D.EMP_LOCATION,
M.SHIPMENT_STATUS,
M.WAIT_TIME
FROM
DB1.TABLE1@HOST_A_LINK D,
(SELECT
FROM
(SELECT
EMP_NU,
SHIPMENT_STATUS,
WAIT_TIME,
ROW_NUMBER() OVER(PARTITION BY EMP_NUM ORDER BY SHIPMENT_DATE) AS rownumber
FROM
DB1.TABLE10@HOST_B_LINK
WHERE rownumber=1) M
WHERE
D.EMP_NUM(+)=M.EMP_NUM
AND rownumber=1
AND D.EMP_STORE='R79'
AND D.EMP_CATEGORY IN ( 'Sales',
'Management',
'Supervisor')
AND D.EMP_LOCATION IN ( '98-778-77', '87-988-98') -
Using Right-justified and left zero-filled condition in message mapping of
Hi,
My Interface is outbound Interface.
Suppose source field named 'MobNumber' is mapped with Target field named 'MobileNumber'.Condition is AS IS(Right-justified and left zero-filled).
How should i do this mapping?
Thanks,
SanghamitraHi Sanghamitra,
Similar question ahs been answered earlier in this thread
Re: Message Mapping using Left justified, right blank/space filled
just replace the filler variable by zero in my post
One small request, if you think your questions are being answered correctly and properly, please kindly, if possible, close down the threads. This way forum members/users who later look up for solutions to similar problem, they know for sure that the problem was finally solved, with the solutions provided in the thread.
regards
Anupam
Edited by: anupamsap on Aug 3, 2011 11:27 AM -
Is there any event of swip left and swipe right in ListView control ?
HI
As in Android phone in call list we can call to some one on right swipe and can message to same person on left swipe. Is it exactly possible in ListView Control for Windows Phone or not?
Actually I need to get the Swipe left and right Event on these bases I have to download and delete the selected listView item.
sandeep chauhanHi Sandeep,
That probably require you to do some extra coding on ManipulationDelta event.
We can get the initial touch point at from ManipulationStarted while we can get current point from ManipulationDelta, do some calculation we can know whether user swipe left or swipe right.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Moved half of right screen to left
hi
i have macbook pro 17' made 2011
with vga 1 amd radeon core i 7 8gig ram hdd 750
last night when i worked my screen got half and the part of half right went to left .. my quarranty support is finished . and i need to repair this ..
as i ask this is for graphics chipset .and i dont know apple repair my laptop or not and how much is that ?
i dont have access to go to apple store easy to ask .. please help me about this ..
where can i go to repair ?.. how much i must pay ?Hey wolfpac2056,
Remove any protective cases or films from the iPod, clean the screen and test with bare fingers.
http://docs.info.apple.com/article.html?artnum=305689#faq5
http://docs.info.apple.com/article.html?artnum=305705
If the iPod touch still will not respond to touch and you have done a restore, it may need hardware repair.
You can request repair online here: https://selfsolve.apple.com/GetWarranty.do
Or make a reservation to visit a Mac Genius online here: http://www.apple.com/retail/
Jason -
How to use left outer joins ,right outer joins and order by clause for belo
Hi,
How to use left outer joins ,right outer joins and order by clause for below XML query.
The query which is red colour returns null then its not displaying any values for columns in that tables. Tried decode, nvl function hasn't worked.
SELECT XMLAGG ( XMLELEMENT( "P", XMLFOREST( P.process_id AS Ppid,
(SELECT XMLAGG( XMLELEMENT( "PI", XMLFOREST( PI.question_id AS PIqid,
PI.process_id AS PIpid,
PI.innertext AS
PItext, PI.itemtype AS PItype,
PI.linkfrom AS PIfrom,
PI.linkto AS PIto,
PI.associated AS PIas,
PI.content_id AS PIc,
PI.exitpoint1_id AS PIe1,
PI.exitpoint2_id AS PIe2,
PI.exitpoint3_id AS PIe3,
PI.followoncall AS PIfoc,
PI.userinput AS PIui,
PI.resolveidentifier AS PIri,
PI.libquestion_idfk AS PIlqid,
PI.isLocked AS PIstls,
PI.PreviousAnswer AS PIPAns,
PI.VisibleToAgent AS PIVAgent,
PI.RetryAttempt AS PIRetry,
PI.Tags AS PITag,
SELECT XMLAGG( XMLELEMENT( "PO", XMLFOREST( PO.option_id AS POoid,
PO.question_id AS POqid,
PO.process_id AS popid,
PO.opt_innertext AS POtext,
PO.opt_linkfrom AS POfrom,
PO.opt_linkto AS POto,
PO.libquestion_idfk AS POlqid,
PO.liboption_idfk AS POloid ) ) )
FROM vw_liveProcessOption_Sim_v6 PO
WHERE PI.question_id = PO.question_id (+)
AND PI.process_id = PO.process_id (+)
) "A" ) ) ) AS "PO"
FROM vw_liveProcessItem_Sim_v6 PI
WHERE P.process_id = PI.process_id
) "A" ) ) ) AS "PI"
FROM liveProcess_ec P
WHERE (P.process_id = 450)
Any help really appreciated.
Thanksuser512743 wrote:
Hi,
Here below is the scripts of tables, insert statements and Required output.
CREATE TABLE VW_LIVEPROCESSOPTION_SIM_v6
( "OPTION_ID" NUMBER,
"QUESTION_ID" NUMBER(10,0),
"PROCESS_ID" NUMBER(10,0),
"OPT_INNERTEXT" VARCHAR2(200 CHAR),
"OPT_LINKFROM" VARCHAR2(20 CHAR),
"OPT_LINKTO" VARCHAR2(20 CHAR),
"LIBQUESTION_IDFK" NUMBER,
"LIBOPTION_IDFK" NUMBER
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,2,450,'Yes',null,'5',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,3,450,'Yes',null,'5',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,5,450,'Yes',null,'6',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,6,450,'Yes',null,'7',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,8,450,'Block All',null,'9',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,9,450,'Yes',null,'10',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,11,450,'Yes',null,'12',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,12,450,'Yes',null,'13',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,14,450,'Yes',null,'16',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,2,450,'No',null,'3',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,3,450,'No',null,'4',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,5,450,'No',null,'8',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,6,450,'No',null,'8',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,8,450,'Standard',null,'11',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,9,450,'No',null,'11',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,11,450,'No',null,'14',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,12,450,'No',null,'14',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,14,450,'No',null,'15',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (3,8,450,'Disabled',null,'12',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (4,8,450,'User Defined',null,'12',null,null);
REATE TABLE "VW_LIVEPROCESSITEM_SIM_v6"
( "QUESTION_ID" NUMBER(10,0),
"PROCESS_ID" NUMBER(10,0),
"INNERTEXT" VARCHAR2(200 CHAR),
"ITEMTYPE" VARCHAR2(50 CHAR),
"LINKFROM" VARCHAR2(500 CHAR),
"LINKTO" VARCHAR2(500 CHAR),
"ASSOCIATED" VARCHAR2(200 CHAR),
"CONTENT_ID" NUMBER,
"EXITPOINT1_ID" NUMBER(10,0),
"EXITPOINT2_ID" NUMBER(10,0),
"EXITPOINT3_ID" NUMBER(10,0),
"RESOLVEIDENTIFIER" VARCHAR2(40 CHAR),
"LIBQUESTION_IDFK" NUMBER(10,0),
"FOLLOWONCALL" NUMBER(1,0),
"USERINPUT" VARCHAR2(200 CHAR),
"ISLOCKED" NUMBER(1,0),
"PREVIOUSANSWER" NUMBER(1,0),
"VISIBLETOAGENT" NUMBER(1,0),
"RETRYATTEMPT" NUMBER(10,0),
"TAGS" VARCHAR2(50 BYTE)
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (1,450,'CBB1015 - Router Firewall Settinngs Process','Title',null,'2',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (2,450,'Is the customers PC Firewall turned off?','Question','1','2.2,2.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (3,450,'Advise the customer to turn off the PC Firewall in order to continue. Has this been done?','Question','2.2','3.2,3.1',null,278,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (4,450,'Advise the customer the PC Firewall must be switched off before this process????','ExitPoint','3.2',null,null,null,14,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (5,450,'Is the customer able to access the internet now?','Question','3.1,2.1','5.2,5.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (6,450,'Is the customer having a problem with a specific website?','Question','5.1','6.2,6.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (7,450,'1536: CBB1008 - Browser Setup and Daignostics','SubProcess','6.1',null,'1536-1-0',null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (8,450,'What is the security level on the CPE Management page?','Question','6.2,5.2','8.4,8.3,8.2,8.1',null,279,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (9,450,'Change the security level to Standard. Does this resolve the customers issue?','Question','8.1','9.2,9.1',null,280,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (10,450,'Issue Resolved','ExitPoint','9.1',null,null,null,1,6,122,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (11,450,'Change the security level to Disabled. Is the customer able to browse the internet?','Question','9.2,8.2','11.2,11.1',null,281,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (12,450,'Change the security level to Standard. Is the customer able to browse the internet now?','Question','11.1,8.3,8.4','12.2,12.1',null,283,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (13,450,'Issue Resolved','ExitPoint','12.1',null,null,null,1,6,123,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (14,450,'Ask the customer to perform a master reset. Does this resolve their issue?','Question','12.2,11.2','14.2,14.1',null,282,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (15,450,'Faulty CPE','ExitPoint','14.2',null,null,null,1,6,124,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (16,450,'Issue Resolved','ExitPoint','14.1',null,null,null,1,6,123,null,null,null,null,null,null,null,null,null);
CREATE TABLE "LIVEPROCESS_EC_V"
( "PROCESS_ID" NUMBER(10,0),
"USER_ID" NUMBER(10,0),
"CREATED" TIMESTAMP (6)
Insert into LIVEPROCESS_EC (PROCESS_ID,USER_ID,CREATED) values (450,7460,to_timestamp('21-APR-08 09.34.41.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'));
Required O/P in XML format
<P>
<Ppid>450</Ppid>
<PI>
<PIqid>1</PIqid>
<PIpid>450</PIpid>
<PItext>CBB1015 - Router Firewall Settinngs Process</PItext>
<PItype>Title</PItype>
<PIto>2</PIto>
<PO />
</PI>
<PI>
<PIqid>2</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customers PC Firewall turned off?</PItext>
<PItype>Question</PItype>
<PIfrom>1</PIfrom>
<PIto>2.2,2.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>2</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>5</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>2</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>3</POto>
</PO>
</PI>
<PI>
<PIqid>3</PIqid>
<PIpid>450</PIpid>
<PItext>Advise the customer to turn off the PC Firewall in order to continue. Has this been done?</PItext>
<PItype>Question</PItype>
<PIfrom>2.2</PIfrom>
<PIto>3.2,3.1</PIto>
<PIc>278</PIc>
<PO>
<POoid>1</POoid>
<POqid>3</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>5</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>3</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>4</POto>
</PO>
</PI>
<PI>
<PIqid>4</PIqid>
<PIpid>450</PIpid>
<PItext>Advise the customer the PC Firewall must be switched off before this process????</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>3.2</PIfrom>
<PIe1>14</PIe1>
<PO />
</PI>
<PI>
<PIqid>5</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customer able to access the internet now?</PItext>
<PItype>Question</PItype>
<PIfrom>3.1,2.1</PIfrom>
<PIto>5.2,5.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>5</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>6</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>5</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>8</POto>
</PO>
</PI>
<PI>
<PIqid>6</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customer having a problem with a specific website?</PItext>
<PItype>Question</PItype>
<PIfrom>5.1</PIfrom>
<PIto>6.2,6.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>6</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>7</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>6</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>8</POto>
</PO>
</PI>
<PI>
<PIqid>7</PIqid>
<PIpid>450</PIpid>
<PItext>1536: CBB1008 - Browser Setup and Daignostics</PItext>
<PItype>SubProcess</PItype>
<PIfrom>6.1</PIfrom>
<PIas>1536-1-0</PIas>
<PO />
</PI>
<PI>
<PIqid>8</PIqid>
<PIpid>450</PIpid>
<PItext>What is the security level on the CPE Management page?</PItext>
<PItype>Question</PItype>
<PIfrom>6.2,5.2</PIfrom>
<PIto>8.4,8.3,8.2,8.1</PIto>
<PIc>279</PIc>
<PO>
<POoid>1</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Block All</POtext>
<POto>9</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Standard</POtext>
<POto>11</POto>
</PO>
<PO>
<POoid>3</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Disabled</POtext>
<POto>12</POto>
</PO>
<PO>
<POoid>4</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>User Defined</POtext>
<POto>12</POto>
</PO>
</PI>
<PI>
<PIqid>9</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Standard. Does this resolve the customers issue?</PItext>
<PItype>Question</PItype>
<PIfrom>8.1</PIfrom>
<PIto>9.2,9.1</PIto>
<PIc>280</PIc>
<PO>
<POoid>1</POoid>
<POqid>9</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>10</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>9</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>11</POto>
</PO>
</PI>
<PI>
<PIqid>10</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>9.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>122</PIe3>
<PO />
</PI>
<PI>
<PIqid>11</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Disabled. Is the customer able to browse the internet?</PItext>
<PItype>Question</PItype>
<PIfrom>9.2,8.2</PIfrom>
<PIto>11.2,11.1</PIto>
<PIc>281</PIc>
<PO>
<POoid>1</POoid>
<POqid>11</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>12</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>11</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>14</POto>
</PO>
</PI>
<PI>
<PIqid>12</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Standard. Is the customer able to browse the internet now?</PItext>
<PItype>Question</PItype>
<PIfrom>11.1,8.3,8.4</PIfrom>
<PIto>12.2,12.1</PIto>
<PIc>283</PIc>
<PO>
<POoid>1</POoid>
<POqid>12</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>13</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>12</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>14</POto>
</PO>
</PI>
<PI>
<PIqid>13</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>12.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>123</PIe3>
<PO />
</PI>
<PI>
<PIqid>14</PIqid>
<PIpid>450</PIpid>
<PItext>Ask the customer to perform a master reset. Does this resolve their issue?</PItext>
<PItype>Question</PItype>
<PIfrom>12.2,11.2</PIfrom>
<PIto>14.2,14.1</PIto>
<PIc>282</PIc>
<PO>
<POoid>1</POoid>
<POqid>14</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>16</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>14</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>15</POto>
</PO>
</PI>
<PI>
<PIqid>15</PIqid>
<PIpid>450</PIpid>
<PItext>Faulty CPE</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>14.2</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>124</PIe3>
<PO />
</PI>
<PI>
<PIqid>16</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>14.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>123</PIe3>
<PO />
</PI>
</P>
Thanks in advance
Edited by: user512743 on Nov 18, 2008 4:46 AM -
Scrollbar in PCUI from the right to the left side in the screen
Hi,
does anybody know if it is possible to move the scroll bar in PC-UI from the right screen side to the left screen side ?
Is it also psooible to move the page-navigation buttons from the right to the left screen side ?
For the user navigation it would be very usefull.
Regards,
KlausHi,
I am from Israel and we use Hebrew that is written RTL.
our portal and PC-UI are in Hebrew.
I am not sure this is what you want but maybe if
you look at note 740124 (and its related notes) it would
give you an idea.
Eyal. -
Command-delete, command-left and command-right not working as expected
On a Mac (in my case OS X 10.6.8) when entering text into a text-field or text-box 'command-delete' in any other application deletes everything between the cursor and the beginning of the current line. I'm using Firefox 10.0.1 and this does not work.
Also, in certain rich text editors such as Gmail's compose mail text-box 'command-left' and 'command-right' which would usually jump to the respective beginning or end of the current line doesn't seem to work.Try:
Create Table ImportLog
( recid int,
grouploadid int,
groupid int,
tablename varchar(128),
note varchar(500)
Insert Into ImportLog
Values
(1,216,1,'tableb','noteb'),
(2,217,1,'tablea','notea'),
(3,217,2,'tableb','noteb'),
(4,217,1,'tablea','notea'),
(5,230,1,'tableb','noteb'),
(6,244,1,'tablea','notea'),
(7,244,2,'tableb','noteb'),
(8,244,3,'tablec','notec'),
(9,217,3,'tabled','noted')
select r1.RecID, r1.GroupLoadID, r1.groupid, r1.tablename, r1.note,
r2.RecID, r2.GroupLoadID, r2.groupid, r2.tablename, r2.note
from ImportLog r1
full join
(select RecID, GroupLoadID, groupid, tablename, note
from ImportLog
where GroupLoadID = '217'
) r2
on r1.TableName = r2.TableName and r1.Note = r2.Note and r1.Groupid = r2.Groupid
where r1.GroupLoadID = '244'
order by 1
GO
DROP Table ImportLog
GO
RecID GroupLoadID groupid tablename note RecID GroupLoadID groupid tablename note
6 244 1 tablea notea 2 217 1 tablea notea
6 244 1 tablea notea 4 217 1 tablea notea
7 244 2 tableb noteb 3 217 2 tableb noteb
8 244 3 tablec notec NULL NULL NULL NULL NULL
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
Rounded corners, top left and top right
Hi
Hope you can help me, as I'm relatively new to PSE 9 , I'm trying to create nice rounded corners on the top right and top left of a new image in PSE 9
Please could you put me in the right direction to get me started.
Many thanks for your assistance.
MikeYou might try something like this:
1. Either duplicate the background layer or double click on the background
so it's not locked.
2. Make your rulers visible (View>Rulers) and pull out four guides, one
for each side of the image. (so the shape tools snap to the edges of your photo)
3. Select the Rounded Rectangle Tool (nested with the shape tools)
4. Set the radius of the corners and draw your shape on the photo.
5. Select the Rectangle Tool and set the option to Add to Shape Area
and draw the rectangle on the bottom half of the photo.
6. Select the Shape Selection Tool and press the Combine button.
7. Move the shape layer below the photo layer in the layers panel, make the photo
layer the active layer and go to Layer>Create Clipping Mask.
MTSTUNER -
Left pane and right pane(Multiple Panes/Multiple Views) in single FACET
Hi All,
Please suggest how can we add left pane and right pane(Multiple Panes/Multiple Views) in single FACET , Do we need to create mutiple custom BO's or single custom BO is enough. Is it feasible requirement to place mutilple panes/views in a single FACET. Please suggest.
Thanks in advance.
TimHi,
Use Back Satement for that.
ex.
DATA: TOWN(10) VALUE 'New York',
CUSTOMER1(10) VALUE 'Charly',
CUSTOMER2(10) VALUE 'Sam',
SALES1 TYPE I VALUE 1100,
SALES2 TYPE I VALUE 2200.
RESERVE 2 LINES.
WRITE: TOWN, CUSTOMER1,
/ CUSTOMER2 UNDER CUSTOMER1.
BACK.
WRITE: 50 SALES1,
/ SALES2 UNDER SALES1.
Reagrds,
prashant -
connecting to 74.50.117.107
appears in firefox bottom right or bottom left side of screen as a text overlay when I go to google.ca homepage why? Searching google for it isn't much help.hello, this sounds like a problem possibly caused by malware on your pc. please go to ''firefox > addons > extensions'' & remove any suspicious entries (toolbars, things that you have not installed intentionally, don't know what purpose they serve, etc). also go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and do a full scan of your system with the security software that you have in place and different other tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Remove a toolbar that has taken over your Firefox search or home page]]
[[Troubleshoot Firefox issues caused by malware]] -
How to change direction from right/left to left/right in a clip
How to change direction from right/left to left/right in a clip with final cut pro x
Use the Flipped effect.
-
Slide toggle from right to left and left to right. in sharepoint issue.
I have used this url to create asp.net sliding panel but panel slides and while page is loading it will dissappear.
link
how to solve it.
my code:
<script src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.9.1.min.js" type='text/javascript'></script>
<script type="text/javascript" src="http://code.jquery.com/ui/1.9.2/jquery-ui.js"></script>
<script type="text/javascript">
$(document).ready(function () {
$(".myButton").click(function () {
// Set the effect type
var effect = 'slide';
// Set the options for the effect type chosen
var options = { direction: $('.mySelect').val() };
// Set the duration (default: 400 milliseconds)
var duration = 500;
$('#myDiv').toggle(effect, options, duration);
</script>
/** Style for the body **/
body {
font: 12px Tahoma, Arial, Helvetica, Sans-Serif;
/** Style for the button & div **/
.myButton {
padding: .2em 1em;
font-size: 1em;
.mySelect {
padding: .2em 0;
font-size: 1em;
#myDiv {
color:Green;
background-color:#eee;
border:2px solid #333;
display:none;
text-align:justify;
#myDiv p {
margin: 15px;
font-size: 0.917em;
/** Style for the cointainer **/
#body {
clear: both;
margin: 0 auto;
max-width: 534px;
html, body {
background-color:White;
hr {
margin-bottom:40px;
<div id="body">
<h2>Slide toggle from right to left and left to right.</h2>
<hr/>
<p>
<select class="mySelect">
<option value="right">Right</option>
<option value="left">Left</option>
<option value="up">Up</option>
<option value="down">Down</option>
</select>
<button id="button" class="myButton">Run Effect</button>
</p>
<div id="myDiv">
<p>Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard d still in their infancy. Various versions have evolved over the years, sometimes by
accident, sometimes on purpose (injected humour and the like).</p>
</div>
</div>
Thanks.Hi ,
Vincent Han thanks for ur reply.
this is my latest code but still not working.
having same issue : panel is about to slide but as soon as page gets refreshed it starts sliding and return on ppage as it is.
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
<style type="text/css">
#img1
background: green;
width: 100px;
height: 100px;
outline: 1px solid #f93;
/** Style for the body **/
body
font: 12px Tahoma, Arial, Helvetica, Sans-Serif;
/** Style for the button & div **/
.myButton
padding: .2em 1em;
font-size: 1em;
.mySelect
padding: .2em 0;
font-size: 1em;
#myDiv
color: Green;
background-color: #eee;
border: 2px solid #333;
text-align: justify;
#myDiv p
margin: 15px;
font-size: 0.917em;
/** Style for the cointainer **/
#body
clear: both;
margin: 0 auto;
max-width: 534px;
html, body
background-color: White;
hr
margin-bottom: 40px;
</style>
<script src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.9.1.min.js" type='text/javascript'></script>
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js" type="text/javascript"></script>
<script type="text/javascript" src="http://code.jquery.com/ui/1.9.2/jquery-ui.js"></script>
<script type="text/javascript">
$(document).ready(function () {
$(".myButton").click(function () {
// Set the effect type
var effect = 'slide';
// Set the options for the effect type chosen
var options = { direction: $('.mySelect').val() };
// Set the duration (default: 400 milliseconds)
var duration = 500;
$('#myDiv').toggle(effect, options, duration);
</script>
</head>
<body>
<form id="form1" runat="server">
<div id="body">
<h2>
Slide toggle from right to left and left to right.</h2>
<hr />
<p>
<select class="mySelect">
<option value="right">Right</option>
<option value="left">Left</option>
<option value="up">Up</option>
<option value="down">Down</option>
</select>
<button id="button" class="myButton">
Run Effect</button>
</p>
<div id="myDiv">
<p>
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem
Ipsum has been the industry's standard dummy text ever since the 1500s, when an
.</p>
<p>
It is a long established fact that a reader will be distracted by the readable content
of a page when looking at its layout. The point of using Lorem Ipsum is that it
has a more-or-less normal distribution of letters, as opposed to using 'Content
here, .</p>
</div>
</div>
</form>
</body>
</html> -
Move to previous or next magnified photo Press Left Arrow and Right Arrow keys does not work
Move to previous or next magnified photo
Press Left Arrow and Right Arrow keys
This command no longer works in iPhoto. The photo just bounces for a moment, then all the photos begin scrolling. I used to be able to just hit the key to scroll one at a time.What version of iPhoto and system are you running? What mode are you in, edit, full view, full screen, ???
OT -
Right hand and left hand click without mouse
Hi, i'm novice in using mac. I'm not to sure how to use right hand or left hand click without using mouse. For instance, how do i click download when i gonna download mp3 files? Pls help
Did you mean how to do a normal click and a right-click?
For normal click, you can either use the big button below the trackpad or you can tab the trackpad (Note that tabbing is disabled by default, you can enable it from System Preferences>Mouse&Keyboard).
To right click, tab trackpad with 2 fingers.
Hope this helps
Maybe you are looking for
-
Yoga 2 Pro - Keyboard lock not working in stand mode
Where can I find the Yoga Utilities suite (Yoga Transitions, Chef, etc.). I just isntalled fresh 8.1 Enterprise and turns out the D:\ partition didn't have the Yoga Utilities available, same on the support site (checked Yoga 13 as well). Pretty dumb,
-
New comp, same iphone, want to keep music - sync w/o losing purchases?
I'm getting a new computer because my old one crashed and before I do anything I want to make sure I set everything up correctly so that I can sync my iPhone with my new computer/itunes without losing all the purchased music I have on there. Since my
-
Psrset and psradm vs. projects
I just took over admin of several Solaris 9 systems where the last admin walked out. I am still trying to iron out what is what here. On one system, the admin had left a startup script in /etc/rc3.d that used psrset and psradm to create a processor s
-
Can I make a custom colour out of a 1 spot colour and 1 process colour?
Hi all. I'm trying to convert a clients colour to a Pantone 802 to run on an indigo press. To get close to the colour I can use a mix of the indigo green and 75% yellow but now i need to convert all my clients colour to my special colour. Id like to
-
Is it possible to fix the chassis, broken axle Macbook air
Hi, I would like to know if it is possible to fix the shaft on my MacBook Air, or if it is completely impossible? Believe that my warranty expired last year :/ I am enclosing pictures so you can see where the error is: