Right place to submit bug reports for the discussions forums?

I know you can post suggestions here regarding how the Discussions system may be improved, but I'd just like to record a bug somewhere and then be informed if and when it is ever fixed. I'm thinking of something like the bugreporter web app that apple makes available. Anyone know about anything like that?

Tom Gewecke wrote:
You'd be surprised.
With pleasure!
Try it with bugreport.apple.com. Need to be a registered ADC Member, but that frees. Be sure to pick a bug that is reproducible with a simple step by step recipe on the most current software.
So what is this bug you have been talking about?
Recurring complaint of mine:
March 2006 [If the RSS feeds contained pubDate and author that would be great!|http://discussions.apple.com/message.jspa?messageID=1892109#1892109]
April 2008 [better rss feeds without jf namespace prefix|http://discussions.apple.com/thread.jspa?threadID=1468264&tstart=189]
The RSS feeds are almost useful. They actually include the author and create date information, but do so in a format that neither safari or any other garden variety RSS reader handles.
Jive's own documentation on the subject [Jive Community: Content Syndication via RSS|http://www.jivesoftware.com/community/docs/DOC-1022] recommends reformatting the output to suit the needs of your audience in the section titled "*Displaying RSS (or, actually doing something with this stuff)*".
It seems the jf: prefixed tags aren't meant to be pushed out to the RSS clients. I certainly haven't found a RSS reader that deals with them correctly or lets you workaround them. So although the feeds have a creation date, modification date, author, and reply count, none of that information can be seen in a garden variety RSS reader. This is particularly a problem for the create date, since the create date of each article is replaced with the pub date of the feed. The pub date of the feed is the time when you pull it down, and that changes each time the feed is refreshed.
Anyway ... it seems to me that it would be a small and correct change that would take the existing RSS offerings that last inch into the realm of useful. Maybe I'll be surprised.

Similar Messages

Is there a place to submit bug reports for iTunes 11?

I was wondering if anyone knows of any communities, or ways in which we can submit errors, or bug reports for the new version of iTunes, version 11.0? The 2 issues so far that I am seeing, is:
1. My account information: iTunes shows I have hidden purchases, when on all my iDevices, I have 0. (In fact, before the update, I un-hid all previously hidden purchases, and it showed correctly).
2. When syncing a device, on the last tab for items on device, on my iPhone 4, iOS 6.0.1, it shows I have 2 songs downloaded from my collection, when I know I have 0. (Verified by checking Settings>General>About>Songs = 0

Yes,
In iTunes;
Help (pulldown)
"Provide iTunes Feedback"
However, as of this writing iTunes 11 isn't listed in the 'Version list, so make sure that you state the version in your description.
-Alan
ps. If you dont see the Help pull-downmenu, press 'Alt' to toggle it.

Bootcamp Version 3.1 --List of bug reports for the Development Team to fix.

Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist

lawlist wrote:
Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist
FWIW, I don't have the symptoms you describe. So I think before you call a symptom a "bug" I think you should confirm that it is indeed a "bug" and not a configuration, software, or hardware issue caused by something such as incorrect installation, incorrect setup, or any other third party or user caused action.
Also, FWIW, I don't think this forum is intended to be used as a survey for gathering "bugs". Apple has an official feedback page where they gather user experiences such as yours. I think if you post your "bugs" there they will get faster attention than posting them here in this user-to-user help forum.

Why can't we submit bug reports for Flash Pro?

I've been looking to submit some bug reports regarding CS5.5 Pro and there just isn't an option in the "Report a Bug/Feature Request" form. WHY not?? I paid for CS5.5 and autoformat breaks my code, but there's no way to report it.

You aren't the first to have a problem with the choices provided. It would be nice if they listed "Flash Pro" uniquely in the list of options at...
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
... since they dio for the rest of the Adobe products. But you should feel free to pick any one of them. I'd choose "Flash Authoring" since I've no idea what it is other than maybe something to do with Flash Pro.

How to I log a bug report for the Online Mozilla Support?

There is a bug in the online support forum. How do I report it?

Hi there,
All bugs can be filed here: https://bugzilla.mozilla.org/ .
Regards,
Ziggy

How to submit a bug report for OSB? - restore fails if number of items per page is changed from the default of 30

In the OSB web gui, one of my users found that if the number of items per page is changed from the default of 30, the restore of the file will fail. He tested this using recent versions of Firefox and IE. We have verified this to also be the case using Chrome.
In a directory containing over 100,000 files, moving 30 at a time to find the one to be restored is a very frustrating user experience.
How do I file a bug report for this issue? Is there a workaround for this bug to enable my users to more easily find the file to restore without being restricted to the default of 30 items per page?

Yes there is a bug in the webtool in the current release. You can use the commandline obtool to do the restore, that is much faster and works fine.
Thanks
Rich

Firefox crashed when I restarted it to install plugins and the crash reporter is unable to submit a report for this crash. How can I submit this report?

# This file is in the UTF-8 encoding
[Strings]
# LOCALIZATION NOTE (isRTL):
# Leave this entry empty unless your language requires right-to-left layout,
# for example like Arabic, Hebrew, Persian. If your language needs RTL, please
# use the untranslated English word "yes" as value
isRTL=
CrashReporterTitle=Crash Reporter
# LOCALIZATION NOTE (CrashReporterVendorTitle): %s is replaced with the vendor name. (i.e. "Mozilla")
CrashReporterVendorTitle=%s Crash Reporter
# LOCALIZATION NOTE (CrashReporterErrorText): %s is replaced with another string containing detailed information.
CrashReporterErrorText=The application had a problem and crashed.\n\nUnfortunately the crash reporter is unable to submit a report for this crash.\n\nDetails: %s
# LOCALIZATION NOTE (CrashReporterProductErrorText2): The first %s is replaced with the product name (i.e. "Firefox"), the second is replaced with another string containing detailed information. These two substitutions can not be reordered!
CrashReporterProductErrorText2=%s had a problem and crashed.\n\nUnfortunately the crash reporter is unable to submit a crash report.\n\nDetails: %s
CrashReporterSorry=We're Sorry
# LOCALIZATION NOTE (CrashReporterDescriptionText2): The %s is replaced with the product name.
CrashReporterDescriptionText2=%s had a problem and crashed.\n\nTo help us diagnose and fix the problem, you can send us a crash report.
CrashReporterDefault=This application is run after a crash to report the problem to the application vendor. It should not be run directly.
Details=Details…
ViewReportTitle=Report Contents
CommentGrayText=Add a comment (comments are publicly visible)
ExtraReportInfo=This report also contains technical information about the state of the application when it crashed.
# LOCALIZATION NOTE (CheckSendReport): The %s is replaced with the vendor name.
CheckSendReport=Tell %s about this crash so they can fix it
CheckIncludeURL=Include the address of the page I was on
CheckSendEmail=Email me when more information is available
EmailGrayText=Enter your email address here
ReportPreSubmit2=Your crash report will be submitted before you quit or restart.
ReportDuringSubmit2=Submitting your report…
ReportSubmitSuccess=Report submitted successfully!
ReportSubmitFailed=There was a problem submitting your report.
ReportResubmit=Resending reports that previously failed to send…
# LOCALIZATION NOTE (Quit2): The %s is replaced with the product name.
Quit2=Quit %s
# LOCALIZATION NOTE (Restart): The %s is replaced with the product name.
Restart=Restart %s
Ok=OK
Close=Close
# LOCALIZATION NOTE (CrashID): The %s is replaced with the Crash ID from the server, which is a string like abc12345-6789-0abc-def1-23456abcdef1
CrashID=Crash ID: %s
# LOCALIZATION NOTE (CrashDetailsURL): The %s is replaced with a URL that the user can visit to view the crash details.
CrashDetailsURL=You can view details of this crash at %s
ErrorBadArguments=The application passed an invalid argument.
ErrorExtraFileExists=The application didn't leave an application data file.
ErrorExtraFileRead=Couldn't read the application data file.
ErrorExtraFileMove=Couldn't move application data file.
ErrorDumpFileExists=The application did not leave a crash dump file.
ErrorDumpFileMove=Couldn't move crash dump.
ErrorNoProductName=The application did not identify itself.
ErrorNoServerURL=The application did not specify a crash reporting server.
ErrorNoSettingsPath=Couldn't find the crash reporter's settings.
ErrorCreateDumpDir=Couldn't create pending dump directory.
# LOCALIZATION NOTE (ErrorEndOfLife): The %s is replaced with the product name.
ErrorEndOfLife=The version of %s you are using is no longer supported. Crash reports are no longer being accepted for this version. Please consider upgrading to a supported version.

I think you may have pasted the wrong thing into the Description.
To try and resubmit a pending report (for example if you lost your internet connection):
#Go to about:crashes in the location bar
#Click the latest report link to resubmit it
If there isn't a pending crash report listed, I'm afraid you may be out of luck for that crash report.

Submitting bug reports for linux player

hello,
we're in the process of improving the
feedback
form to better collect your input on the linux version of flash
player 9. while we are waiting for these form updates to be made,
please use the "Problem description" field near the top of the form
to provide additional information such as:
* distribution and version
* browser and version
* any mutant library configuration (other than those included
with distribution)
* camera/microphone type (if applicable)
this information will greatly help our QE team in reviewing
and reproducing your issues, which leads to issues getting fixed
faster.
thanks!
jennifer
(adobe's flash player program manager)

Anyone have any idea how to submit a bug report for Oracle XE.Posting bug description in this Forum should be enough.

Sending a bug report on the OS and a sleep mode problem.

I find the bug button in Safari really convenient for sending Apple bug reports. And when other applications crash, you usually get an error dialog with a button to send a bug report. But sometimes problems arise that require reporting, but which don't fall in either of these categories. It would be very handy to have a bug "button" for the OS, or perhaps just a menu selection in the Finder menu bar that invokes a bug report dialog box. I know you can dig around and find the URL for Apple's bug report web page, but I am always forgetting it -- I suppose I could just bookmark it, but then I'd just have to dig around in all the bookmarks to find it. Better would be a utility built-in to the OS for sending bug reports (like Safari's). It could also automatically transfer necessary info about the OS rev and such.
The problem I had was this. I have a script that puts my iMac to sleep. I put the script alias on the task bar and a single click puts the computer to sleep (easier than using the menu). Unfortunately, I sometimes click it by mistake when I am trying to click an adjacent icon in the task bar, and the Mac starts going through its cycle to enter sleep mode and is impervious to anything I do to try and cancel it. I tried pressing the space bar continuously to prevent it from going to sleep, but that did not work. Worse, when it went to sleep and I woke it up again, the task bar would not appear, clicking on app windows did not activate them, Finder menus could not be selected, etc. The cursor would move, but I could not do anything else. (I wish now I had noted if the clock in the menu bar was still advancing, but I didn't think to do that.) I powered down the iMac from the power key and rebooted. Things are working fine now.
I wanted to send a bug report on this, but realized that unlike Safari, there was no button or menu selection for doing that. So here I am.
Any suggestions are welcome.
TIA,
Drake

[email protected]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Time Out error problem when i run the report for the whole plant

Dear all,
pls find the below coding, when i execute this report for the whole plant , it gives me time out error since it has to process huge database. pls suggest me in which part of my below coding i can improvise or any other better way to fetch the same result.
pls note that
i m using Views for querying.pls also note the comments given in Bold to understand the reason behind the coding.
Views used in are - ZVPOD and ZVPRDCONF.
START-OF-SELECTION.
Data: zstat type jest-stat.
data: stklocaf type mska-lgort.
data: stklocas type mska-lgort.
To collect the status of the production order by joining the ZVPOD and JEST table.
CLEAR it_ZVPRODDET.
SELECT DISTINCT ZVPOD~bukrs ZVPOD~aufnr ZVPOD~objnr
jest~stat ZVPOD~werks ZVPOD~arbpl ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN jest ON ZVPOD~objnr = jest~objnr
INTO CORRESPONDING FIELDS OF wa_ZVPRODDET where
plnbez in FGM and arbpl in wc and werks in plant
and SSAVD in eldate
and J_3AKORD2 in cups and jest~inact ne 'X'.
 APPEND wa_ZVPRODDET TO it_ZVPRODDET.
ENDSELECT.
SORT it_ZVPRODDET BY aufnr stat.
Loop thru Itab to check and delete the records from itab for the specified status.
LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 IF wa_ZVPRODDET-stat = 'I0045' . " TECO - compl
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0009' . " CNF - Confirmed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0012' . " DLV - Delivered
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0046' . " CLSD - Closed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0076' . " DLFL - Del Flag
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'E0003' . " SCLS - Short Close
 CLEAR tj30t.
 SELECT SINGLE txt04
 FROM tj30t INTO tj30t-txt04
 WHERE stsma = 'PRDHOLD' AND
 estat = 'E0003' AND
 txt04 = 'SCLS' AND
 spras = 'EN'.
 IF sy-subrc = 0.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ENDIF.
 ENDIF.
* Condition for Prod Order released - REL
 IF wa_ZVPRODDET-stat = 'I0002'.
 mreleased = 'Y'.
 else.
 mreleased = 'N'.
 endif.
 zstat = wa_ZVPRODDET-stat.
 IF mreleased = 'N'.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr
 and stat = zstat.
 ENDIF.
ENDLOOP.
Loop thru the filtered ITAB to get all the production order details for the production order number specified in the where clause( zaufnr ) and populate another internal table.
 LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 zaufnr = wa_zvproddet-aufnr.
 zarbid = wa_zvproddet-arbid.
 at new aufnr.
 SELECT DISTINCT * INTO CORRESPONDING FIELDS OF walnpln
 FROM zvpod where plnbez in FGM and arbpl in wc and SSAVD in
 eldate and werks in plant and J_3AKORD2 in cups and aufnr = zaufnr.
 APPEND walnpln TO itablnpln.
 endselect.
 endat.
 endloop.
 clear walnpln.

Looping thru Internal table and performs all the following calculations and inner loop
and also relevant querying.
Assume that ITABLNPLN holds appox. 8000 records.
LOOP AT itablnpln INTO walnpln.
 contot = 0.
 SELECT distinct * INTO CORRESPONDING FIELDS OF TABLE itablnp
 FROM zvprdconf where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 clear zvprdconf.
 SELECT single isdd
 FROM zvprdconf into zvprdconf-isdd
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 SELECT single isdz
 FROM zvprdconf into zvprdconf-isdz
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 IF sy-subrc EQ 0.
 Assume that ITABLNP holds appox. 30 records.
 loop at itablnp into walnp.
 contot = contot + walnp-J_3ALMNGA.
 move walnp-J_3ASIZE to walnpln-J_3ASIZE.
 move zvprdconf-isdd to walnpln-zdate.
 move zvprdconf-isdz to walnpln-ztime.
 endloop.
 walnpln-output = contot.
 endif.
 walnpln-wip = walnpln-menge - contot.
 if walnpln-werks = '1000'.
 stklocaf = '1050'.
 stklocas = '1060'.
 elseif walnpln-werks = '2000'.
 stklocaf = '2150'.
 stklocas = '2160'.
 endif.
 select single kunnr into walnpln-ship from vbpa where
 vbeln = walnpln-KDAUF and PARVW = 'WE'.
 zship = walnpln-ship.
 move zship to walnpln-ship.
 select single kalab into walnpln-zactqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocaf.
 condense walnpln-kdauf.
 zsales = walnpln-kdauf.
 concatenate zsales 'S' into zso.
 select single kalab into walnpln-zsndqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocas
 and J_4KSCAT = zso.
 zmatn = walnpln-plnbez.
 zsale = walnpln-KDAUF.
 walnpln-kdauf = zsale.
 walnpln-plnbez = zmatn.
 zcust = walnpln-kunnr.
 walnpln-kunnr = zcust.
 select single bezei into walnpln-season from TVV2T where
 kvgr2 = walnpln-kvgr2 and SPRAS = 'E'.
 select single bezei into walnpln-shipmode from T173T where
 vsart = walnpln-vsart and SPRAS = 'E'.
 STRL = strlen( walnpln-j_3akord2 ).
 if strl = 4.
 move walnpln-j_3akord2 to walnpln-j_3akord3.
 clear walnpln-j_3akord2.
 endif.
 move zremk to walnpln-remk.
 MODIFY itablnpln FROM walnpln.
 contot = 0.
 clear itablnp.
 ENDLOOP.
 PERFORM build_fieldcatalog.
 PERFORM build_layout.
 PERFORM display_alv_report.

Hi raja,
Plese go through the suggessitions.
1.avoide the select ...endselect. write the below select
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X'.
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
2..first of all dont delete a record inside the loop. instead use the Field symobols.
have u obsereved you code in the loop!!!!. wht u r doing..
u r removing the same record which u in the loop..
If u wanto delete the entires with check to stat... then.. why dont u put the STAT field in Wher e condition..? by this you reduce the data base select time..
Now the select query is like the below....
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 ( STAT <> 'I0045' AND
 STAT <> 'I0045' AND
 STAT <> 'I0009' AND
 STAT <> 'I0012' AND
 STAT <> 'I0046' AND
 STAT <> 'I0076' AND
 STAT <> 'E0003' ).
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
3. WHT IS MEANING OF THE SELECT
 CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
 DELETE IT_ZVPRODDET WHERE AUFNR = WA_ZVPRODDET-AUFNR.
ENDIF........ IN WHERE CONDION U R GIven all are constant values right?..
why u need select it inside the loop.. u can write before the SELECT from ZVPOD..
that why first checke this field then go for fur thure selects..
now u r code looks like this....
CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
 FROM ZVPOD
 INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
 INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
 WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0009' AND
 JEST~STAT <> 'I0012' AND
 JEST~STAT <> 'I0046' AND
 JEST~STAT <> 'I0076' AND
 JEST~STAT <> 'E0003' ).
 IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
 ENDIF.
ENDIF.
there are so many select inside the loop...... please Delete all of them.... write them be for the loop.......using the FOR ALL ENTRIES.....
THEN LOOP THE TABLE USING THE WHERE CONDITIONS.
Plese write u updated code here again..

Error at the moment to send the report for the printer.

When I execute a report for the Report Builder (Oracle Developer Suite 10g), the report is generated successfully, but, at the moment to send for the printer errors occur: REP-0069/REP-57054/REP-50157 (error 1848).
Please, help me!!!
Nádia

Hi,
We had the same problem at my organization. Our DBA had to install a patch:
To implement the solution, please apply the patchset to upgrade to 10.1.2.2.0.
To obtain a patchset from MetaLink:
1) Click on Patches & Updates.
2) Click on Simple Search
3) Select your product, release and platform.
4) Patch number is 4960210
Description PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2
Product Oracle Development Tools
Release 10.1.2.2
The Patchset 4960210 is a patch for the Application Server AND Developer Suite
5) Read any applicable notes before downloading, then click the Download button.
Note: Please review the Readme file for instructions on how to install the patchset.
you should launch the installer with the executable setup.exe provided in the patchset, it could shows up a message indicating nothing was upgraded, but the release should be modified to 10.1.2.2
Hope that helps

Cannot select the "submit crash reports" in the Options-Advanced-General box: the tick in the box is absent on restart

Cannot select the "submit crash reports" in the Options-Advanced-General box: the tick in the box is absent on restart

See:
*http://kb.mozillazine.org/Breakpad#Mozilla_Crash_Reporter
You can check if you have write permission for this registry key:
*HKEY_CURRENT_USER\Software\Mozilla\Firefox\Crash Reporter\SubmitCrashReport

[svn:fx-trunk] 5170: Round 2 of bug fixes for the Spark skins for Halo components.

Revision: 5170
Author: [email protected]
Date: 2009-03-04 17:50:32 -0800 (Wed, 04 Mar 2009)
Log Message:
Round 2 of bug fixes for the Spark skins for Halo components. Thanks to Alex for help with the data grid issues.
Bugs fixed:
SDK-19655 - Setting rowCount property on DataGrid causes extra blank row to be displayed
SDK-19652 - Items in a DataGrid do not line up after scrolling.
SDK-19605 - disabled Halo ColorPicker with Gumbo skin draws too dark
SDK-19596 - When you have a single button on an Alert, the left edge looks flatter than the right
SDK-19585 - Menus compiled with the halo theme in Flex 4 have a different backgroundColor than in Flex 3
SDK-19665 - Halo List with Gumbo skin doesnt draw the alternating item color all the way to the right edge of the control if VScrollBar is present
SDK-19651 - odd header rendering issue on Halo DataGrid with Gumbo skin
QA Notes: The alert layout code was positioning the buttons/text on sub-pixel boundaries if the width or height of the alert was an odd number of pixels. We always snap to pixel boundaries now, but this may cause bitmap compare issues with Alert.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19655
http://bugs.adobe.com/jira/browse/SDK-19652
http://bugs.adobe.com/jira/browse/SDK-19605
http://bugs.adobe.com/jira/browse/SDK-19596
http://bugs.adobe.com/jira/browse/SDK-19585
http://bugs.adobe.com/jira/browse/SDK-19665
http://bugs.adobe.com/jira/browse/SDK-19651
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/alertClasses/AlertForm.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/ScrollControlBase.as
flex/sdk/trunk/frameworks/projects/halo/defaults.css
flex/sdk/trunk/frameworks/projects/sparkskins/src/mx/skins/spark/ColorPickerSkin.mxml

How to submit a report ,Passing the internal tables from parent report

How to submit a report ,Passing the internal tables from the parent report ?

The SUBMIT statement executes a report from within a report. i.e. you could have a drill-down which
calls another report. Can only execute reports of type '1'.
*Code used to execute a report
SUBMIT Zreport.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
load each personnel number accessed from the structure into
parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
                with p_param2 = 'value'.
Other additions for SUBMIT
*Submit report and return to current program afterwards
SUBMIT zreport AND RETURN.
*Submit report via its own selection screen
SUBMIT zreport VIA SELECTION-SCREEN.
*Submit report using selection screen variant
SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
*Submit report but export resultant list to memory, rather than
*it being displayed on screen
SUBMIT zreport EXPORTING LIST TO MEMORY.
Once report has finished and control has returned to calling
program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
DISPLAY_LIST to retrieve and display report.
*Example Code (Retrieving list from memory)
DATA BEGIN OF itab_list OCCURS 0.
        INCLUDE STRUCTURE abaplist.
DATA END OF itab_list.
DATA: BEGIN OF vlist OCCURS 0,
        filler1(01)   TYPE c,
        field1(06)    TYPE c,
        filler(08)    TYPE c,
        field2(10)    TYPE c,
        filler3(01)   TYPE c,
        field3(10)    TYPE c,
        filler4(01)   TYPE c,
        field4(3)     TYPE c,
        filler5(02)   TYPE c,
        field5(15)    TYPE c,
        filler6(02)   TYPE c,
        field6(30)    TYPE c,
        filler7(43)   TYPE c,
        field7(10)    TYPE c,
      END OF vlist.
SUBMIT zreport EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = itab_list
EXCEPTIONS
    not_found = 4
    OTHERS     = 8.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = vlist
    listobject         = itab_list
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.
Submit report as job
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
                             ' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
      host like msxxlist-host.
data: begin of starttime.
        include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
       exporting
            delanfrep        = ' '
            jobgroup         = ' '
            jobname          = jobname
            sdlstrtdt        = sy-datum
            sdlstrttm        = sy-uzeit
       importing
            jobcount         = jobcount
       exceptions
            cant_create_job = 01
            invalid_job_data = 02
            jobname_missing = 03.
if sy-subrc ne 0.
                                       "error processing
endif.
Insert process into job
SUBMIT zreport and return
                with p_param1 = 'value'
                with p_param2 = 'value'
                user sy-uname
                via job jobname
                number jobcount.
if sy-subrc > 0.
                                       "error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
       exporting
            event_id             = starttime-eventid
            event_param          = starttime-eventparm
            event_periodic       = starttime-periodic
            jobcount             = jobcount
            jobname              = jobname
            laststrtdt           = starttime-laststrtdt
            laststrttm           = starttime-laststrttm
            prddays              = 1
            prdhours             = 0
            prdmins              = 0
            prdmonths            = 0
            prdweeks             = 0
            sdlstrtdt            = starttime-sdlstrtdt
            sdlstrttm            = starttime-sdlstrttm
            strtimmed            = starttimeimmediate
            targetsystem         = host
       exceptions
            cant_start_immediate = 01
            invalid_startdate    = 02
            jobname_missing      = 03
            job_close_failed     = 04
            job_nosteps          = 05
            job_notex            = 06
            lock_failed          = 07
            others               = 99.
if sy-subrc eq 0.
                                       "error processing
endif.

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

Right place to submit bug reports for the discussions forums?

Similar Messages

Maybe you are looking for