Right shift key doesn't work after BIOS update on Satellite A200-28P

For some reason, after I upgraded my Bios, my right shift key doesnt work and neither does my FOUR and SIX button, hence why i have written in words :(,
I tried reinstalling windows, hasnt made a difference.
I tried rolling back the drivers for the keyboard, as well as changing to the US version of the keyboard, nothing has helped.
Thanks

okay first problem is, my warranty was due to expire, so i brought an extension, and nothing has happened whatsoever on those regards, secondly, i ran a keyboard test, and i found out that it wasnt only the four six and right shift key which was now no longer working, but also the f2, f10, f11, f12,
I have used a external keyboard, which works :D but it annoying to use that when the whole point of a laptop is to have the inbuilt keyboard,
any suggestions on this

Similar Messages

Fans are not stopping working after BIOS update on Satellite A200

Hi,
Im using Satellite A200-1bp. I recently upgrade my BIOS 5.20-win and my fans are not stopping working all the time.
I think its reason is BIOS upgrade
How can i find lower bios?
Please help me..

Hello
Maybe this thread can help http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=128543
Be sure you use right BIOS for your notebook model.

After BIOS update my Satellite A200-13J is slower

My notebook is slower since I updated the BIOS? I bought this notebook 1,5 month ago and now it takes 7 minutes to start! Internet Explorer takes 50 seconds to start...
Did I installed an update which isn't compatible with my notebook?? What do I have to do???

I have updated BIOS on Satellite A200 (PSAE0) to version 5.20 and there are no changes at all. Maybe you should back up all your important data and make clean OS installation.
I know it sounds stupid but you must also understand that nobody here know your personal OS settings and what can be reason for slow bootup.

Power button orange light doesn't work after BIOS update on MSI 2A9C

Hi,
I have updated my system BIOS (downloaded from HP web site), the computer works I can enter into BIOS setting.
PC: HP Pavillion p6716it-m
OS: Windows 7 Home Premium
Old BIOS version: 6.16
Mainboard: MSI 2A9C (from CPU-Z)
Data from new BIOS main page:
BIOS revision: 6.18 01/05/12
Core version: 08.00.15
When I put the computer into sleep mode with the old BIOS the power button became orange, now with the new BIOS it is off. In the BIOS setting I have noticed that if I go to: "main -> SYSTEM IDs" the renderig stage is not perfect, at regular intervals some strange artifacts has shown. It seems like when you draw on a window some GUI components without using double buffering.
After update I realized that the new BIOS in the HP web site is for mainboard: MS-7613. It is equivalent to mine? Thanks.

Sorry we support retail msi products only: https://forum-en.msi.com/index.php?topic=110544.0
topic locked.

Left shift key doesn't work on some characters

In some applications, such as Excel and AOL, my left shift key doesn't work on some letters. Consequently, when I'm typing I get lower case letters when I've typed shift plus the letter to get a cap. Right shift works OK, but I'm not used to using it. It happens on i, t, and p, I've noticed so far. I don't know if it's the keyboard or the application. Word seems to work fine.
Would welcome any ideas on what is causing this and how to fix it.
Powermac G5 Mac OS X (10.4.7)

Is it possible that you have inadvertently switched to a different keyboard layout? Open System Preferences, then click on the Language & Text preferences. Within the Language & Text preferences click on the 'Input Sources'. You should see a long list of languages representing the various keyboard layouts that are available. Make sure that only the keyboard language you use is selected. If there are multiple languages selected then de-select the extras.
If you continue to have problems then check the 'Show input menu in menu bar' checkbox in the lower section of the preference pane. This will place an icon in the upper right menu bar (it looks like a flag representing the language you have chosen for your input device) that provides additional options. I suggest selecing the 'Show Keyboard Viewer' option and then try pressing the keys that you are having problems with to see how they show up on the keyboard viewer graphic. If you've set the correct language for your keyboard and the key sequences still don't match, then you may need to take your keyboard in for service. Better yet, borrow another keyboard to confirm that the keyboard is the issue.

I updated to maverick, and maybe it's a coincidence but my left shift key doesn't work unless i really press it down. Is there any way to fix this without bringing it into the Genius Bar?

i updated to maverick, and maybe it's a coincidence but my left shift key doesn't work unless i really press it down. Is there any way to fix this without bringing it into the Genius Bar?

Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.

Right-Command Key doesn't work

Well, on my PowerBook G4, there are 2 command-keys (I'm sure that's common).
My right command key doesn't work what-so-ever. I tried using the keyboard viewer and it doesn't turn gray either. Funny thing, but when I press the LEFT one, both cmd keys turn gray.
Well i dont know if its a missing driver or a setting, (maybe even a malfunctioning keyboard?) but if anyone can help I would appreciate it. Thanks.

Sorry, my bad. Haven't read through it in awhile and thought it affected keyboard too, but looks like just trackpad and other issues described. You may just have a bad keyboard or something lodged under that key.

Caps Lock, Shift key doesn't work

My MBA late 2010 caps lock, they shift key doesn't work. Is there anyone knows how to fix and solve my problem, please?

Hey reandel,
I'd check out the recommended troubleshooting steps within the following document:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
Welcome to Apple Support Communities!
Best,
Delgadoh

My SuperDrive doesn't work after Lion update

My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
Thanks

I too have had the problem since updating to Lion. My superdrive isn't even recognized. I have repaid hard disk permissions and also reset PRAM. Sure wish I had a fix.

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Satellite A105 Shift Keys stop working after BIOS update

I have a stack of laptop boards from the A105 series (Intel chipset) that I received with bad BIOS's. Two worked, and I updated the BIOS's on them to fix CPU compatibility issues. After that, the shift keys stopped working, and pressing Shift-A causes the power light to dim. Reverting to ANY previous version BIOS, whether through the Windows program, CD, or Crisis Recovery floppy (magic key is "F", not "B", "Esc", or "U"), does not fix the keyboard problem.
To make things more confusing, I did notice that the one single BIOS that seems to actually correct the problem is version 1.50, which I haven't seen available for any Tecra A7 or Satellite A100/A105, except a couple A100's, but the BIOS file is much too small and can't be loaded.
Does anyone have any idea why these Intel-based boards are doing this? Or does anyone know where I can get a usable version 1.50 BIOS?
For the sake of this post, please consider my skill level to be high. (In other words, I would be thankful for people trying to help with "Replace the keyboard", but I have about a dozen keyboards, all of which I have tried, and all of which work on other laptops. Additionally, if you have just a theoretical solution, I'm definitely open to hearing it. Also, if a Toshiba tech would like to reply, I would very much appreciate it!)

Hi, thank you for your help.
Some motherboards were not in chassis when I got them. Is there a place the PSAAxx model number would be written on the boards?
Four PSAA8U (Two A105-S4334 and Two A105-S4014) - Intel Chipset, fingerprint reader. Tried BIOS Versions 1.40, 1.70, 2.00, 5.10, 5.60, 5.90, and 6.00. Shift keys do not work on either one.
Two PSAA2U (A105-S2091 and A105-S2031) - ATi Chipset. BIOS versions 1.50, 1.80, and 2.30. Keyboard works.
Another PSAA8U (A105-S4184) - Intel Chipset, no fingerprint reader. BIOS version 6.00. Keyboard works.
I noticed that so far all of the models with fingerprint readers have the problem. All of the ATi Chipset boards are working fine, but they have significant processor limits. I am in the middle of updating the BIOS in another Intel one using a Crisis Rescue Disc, so after that finishes I will try disconnecting the fingerprint reader to see if it has an effect.
I don't think the keyboard controller is faulty, because these boards all failed on the same day. I have tried updating the BIOS using WinPhlash, Phlash16 in DOS, the install CD, and a Crisis Recovery Disk. I set the defaults in the BIOS almost every time, and I also have tried holding the power button for 60 seconds with the power cord unplugged and the battery removed (as some people have suggested.)
The shift keys don't work in DOS, Linux, Windows, or even in the BIOS. I test it in the BIOS by using Tab to cycle through the fields in time of day, then Shift-Tab to cycle backwards. This works with a USB keyboard, and it also works on the ATi chipset models and the Intel chipset models that are still working.
Thank you for your reply. (-:

My shift key doesn't work to pick up multiple files

My shift Key does not work when used to collect multiple files.

Murilo.mac wrote:
You shall hold the Cmd key if you want to select multiple files
Not if they are sequential, which is what the OP seems to want.

Satellite L300 - webcam doesn't work after BIOS upgrade

I recently upgraded BIOS to 2.2 and the webcam has stopped working. It disappeared and there is one unknown device in the device manager in the universal serial bus controller.
I tried everything even with new clean fresh Vista OS but nothing like there is no webcam I installed the drivers but not recognized so I would like if I can to downgrade BIOS to 1.5 and to fix the webcam. If I can cos I need it. Is that possible?
Tnx

Hi
I dont think its BIOS issue.
First of all the unknown device (webcam) appears in the device manager and this means that an device has been recognized by system and BIOS.
The only reason why its listed as unknown devices is: the driver is not installed properly.
After BIOS update you have to set the BIOS back to default. Access BIOS pressing F2 and within the BIOS you can use the button F9 to set it to default and F10 to save the changes.
After that you should boot up the unit and should go to device manager.
Mark the unknown device and delete it from the list (if possible)
Go to control panel -> software and check the software list for webcam software (from chicony). Uninstall this software if its part of the list.
Now reboot the notebook.
Clean the OS using CCleaner and install the correct webcam software for Vista. Note: please pay attention to 32bit or 64bit version.
If the installation would fail, try the Toshiba recovery disk and set the notebook back to factory settings.
By the way: BIOS downgrade is not possible because the old BIOS is not downloadable.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Where can I find a BIOS update for Satellite A200-14D (PSAEC)

Hello,
Where can I find a BIOS update for this model?
My bios is 23/10/07 Windows Vista 32 Bit 1.80-WIN

Hi
Did you check the Toshiba European driver page?
There you could find all drivers and BIOS for the Satellite A200-14D (PSAEC)
But I checked the page and the BIOS 1.8 for Win Vista 32bit is still the newest one.
Seems you are already up to date buddy ;)

Right shift key doesn't work after BIOS update on Satellite A200-28P

Similar Messages

Maybe you are looking for