RIGHT SIDE OF BRIDGE INTERFACE "FADED OUT"

I just upgraded from CS5 to CS6, and I get a "strange" occurrence in which a portion of the right side of the Bridge interface, where 2/3s of the area of the METADATA/KEYWORDS are no longer visible, & the Window or Page "under" it shows through.
EXAMPLE: In Photoshop, the lower, right half of my interface has the History Palette. When I "switch" to Bridge, though the Preview "Window" in the top right remains in tact, the Photoshop History Pallete is "covering" the right 2\3s of the METADATA panel.
It occurs with any "page" below the Bridge interface; for example with the Bridge Forum web page open, the portiion that depicts "Top Participants" etc. covers the Bridge METADATA panel.
I tried taking a screen shot but the problem "went away" in the screen shot interface.
Leigh

Selecting "NEW SYNCHRONIZED WINDOW" has apparently fixed the problem, but can't help but wonder why it happens at all.

Similar Messages

Pictures in e-mail are cut off on the right side.

some pictures in e-mail are cut off on the right side. When I zoom out the text gets smaller but the picture stays the same

Sounds like the webpage you are on isn't optimized for devices with touch screens. I would suggest attempting to use a different web browser such as atomic browser or any of the other ones in the App Store. Otherwise you may have to resort to using a Mac/PC to do your homework.

Color Laserjet 3600 PQ print quality test pink shows faded on right side

All the color print outs have this somewhat faded color on the right side.
When I ran the PQ test under troubleshooting it shows on the pink page missing color pink towards the right side.
fades into white / blank. Already changed the toner and still happens. I calibrated that printer twice and still occurs.
what else can i do to fix this?

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

My iphone 4s screen turned freaked out before my eyes, changing all different colours, now it is blue and black along the right side with horizontal lines, and is flickering. I DIDN'T DROP IT.

I was just sitting on the couch scrolling through facebook, I closed out of that and went to open safari, when it spazzed out, for a few mintutes it looked like LSD vision, it was all different colours and flickering the whole time. I turned it off and on again, and plugged it into my computer and now the right side is nearly completely blue, and bleeds to the left side with horizontal lines, and it is still flickering. I just finished paying the **** thing off. I thought I'd get another year out of it. I have taken exemplary care of it and it hasn't left the case since the day I bought it. I haven't dropped it, there was no warning for the screen to start doing this. So my question is, is there an easy fix (I am about to restore and update it, and I already played around with the screen brightness), and if not, am I going to have to pay for the screen to be replaced, because I don't have that kind money.

Probably sounded funnier in your head.

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
David Miller
[email protected]

Line Out (Lime Color) Right Side not working.

I plugged in a 3.5m into my Line Out, I have it connected to my stero aux. My stero is working fine and everything with the sound is working right. No shortage in my wires. When I plug it into my Headphone jack it works fine but in my line out the right side only works but the left side sounds really really low. I have adjusted the levels and balance.
I think that the Maufacture must of missed up on the line out size. That's the only thing I can come up with.

this has happened to me. What part do I need to ask for in the shop. My sound was muffled, but I removed the speaker plug from the back and put it in the headset in the front and the whole thing is great now. I just need to now what part I need to ask for so I can fix it. I will google how to do it.
7 - Audio: Line Out (lime)
Heres my specks
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01486318&lang=en&cc=us&taskI...

Bridge Panel View Lost in CS6-Right Side

Somehow I have lost the ability to size the right side of my Bridge panel. It is too large and I cannot bring the right side border into view to see my Metadata and Preview Panels.
Also the numbering of the thumbnails is lost "off the screen".
HELP!!!??
Dan

Thank You Curt!!!! It is hell getting old

Strange iPhone simulator slides out on right side of dual monitor

I'm reviewing all the processes and completely stumped! Towards the VERY right side of my left monitor, I can drag leftwards and an simulated iPhone will appear for a second and snap back. I have no idea what I installed recently or way back, but can't figure out how to quit it (or uninstall)
Any ideas much appreciated!

I think you're right-- however, I always thought that mono recordings played through both ears--always worked that way on my old stereo system!
This podcast does that, too, but only if one pulls the plug out a bit! That's what's confusing to me. Why does it change from both ears to only one ear depending on far the plug is pushed in? (And especially as it behaves opposite what one would expect-- both ears when not plugged in all the way-- only 1 when fully embedded!)

Can't figure out how to print on the right side of a greeting card using a 5X7 when folded

I have a HP Officejet Pro 8500A. I am trying to print a greeting card, but cannot figure out how to print on the right side of the paper so that it's on the correct side when folded. The paper is 5X7 when folded, 10X7 laid flat.

shgilljx,
Welcome to the forums. I will try to explain this in simple terms, and you'll have to play with it. We'll use plain paper, cut to 10x7. You'll need a marker, 4-5 sheets of paper.
Lay paper flat, number top 1, bottom 2. Flip paper over right to left. number top 3, and bottom 4.Draw a line where the fold would be on each page.1) Put paper with number 3 side up in printer.
To create both templates using MW Office, do this. The requires 2 documents. One is graphic, one is text.
Text template: The text will be printed on number 2. That means your wording must be within the bottom half of the page.
Graphic template: The image must be rotated 180 degrees.The image must be within the top half of the page.
Print the text template. Insert side #3 into the printer. The text should print on side #2.
Print the graphic template: Insert side #1 into the printer. The graphic should print on side #3.
When folded, all should be correct, if I did it right.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Why am I only getting audio out of the right side of my iPhone4 headset?

I plugged my car auxiliary audio cord into my iPhone 4 this morning, but the sound only came out of the right speakers.
I thought it might be the cord. So, I plugged in my iPhone headset, and the audio is still only coming out of the right side.
Why is it doing that, and how do I fix it?

i would try more headsets to be sure
and made 100% sure the connector was all the way in some people dont apply enough preasure
if it dont give anything the connector inside the phone is damanged and the phone will require repair

My iphone 5c screen is popping out from the top right side , can i exchange it for a new one at the apple store ?

my iphone 5c screen is popping out from the top right side , can i exchange it for a new one at the apple store ?

If it is still under warranty, and they determine it is a manufacturing defect, they will replace it. Be sure to back everything up before taking it into the Apple Store. That way, if you do get a new device, you will be able to set it up from the backup.
Cheers,
GB

Only getting sound out the right side speaker

Just this morning, I realised that I am only getting sound out the right side (built-in) speaker on my iMac 24 inch.
Any ideas as to why/how this is happening. It was working fine last night.
Do I have to take it in for repair??

thanks- yes that was the answer!
god knows how i altered the setting. must have been a keyboard short-cut and i did it by mistake...!

Why sound came out only on the right side ?

Hi guys,
When I play in on the timeline & view the sequence in the canvas, the music came out on both sides of my earpiece.
When I export it using QuickTIme, the sound only came out on the right side of my earpiece ?
I check both the sound lines in the timeline & they look identical.
Any ideas why ?
Thanks

Ian R. Brown wrote:
Ctrl click on the QT file and select "Get Info".
Check to see whether there are 2 audio tracks or just one ....... it's just possible a glitch may have made it lose one.
Sorry Ian, I should have make myself clearer. When I said the sound only come out on the right side I meant this:
Say there are 5 sections in my clips.
Section 1 & 2, exported file when played sound only come out from the right ear piece.
Section 3,4,5 exported file when played sound came out from both left & right earpiece.
Section 1 & 2 and Scection 3,4,5 is playing the same song except that the same song starts at section 1 and 3 respectivley. (meaning at beginning of section 3, I drag the same song to the audio track to repeat the same song)
Any ideas ?
Thanks

Right side of Menu Bar disappears Coming out of a Sleep

Uploaded with plasq's Skitch!
Whenever my computer comes out of a sleep, the right side of the menu bar (clock, spotlight, airport, etc.) completely disappears.
I know exactly what's causing it: A week ago I just started using my MacBook with the lid closed. It happens when I unhook the MacBook from all the peripherals (display, power, keyboard) and then plug it back in to the peripherals. Now, if I open it after I unplug it from the peripherals, then plug it back in to them, the menubar will come back. It's only if it remains closed and I re-plug in the peripherals that this happens.
It's quite an annoying bug because the only way I've found to resolve it is to restart.
Message was edited by: cgriff44

I found a workaround. Switch the display to a resolution smaller than the previous screen then switch it back.
Example, I have a 15.4 mbp and the resolution is 1400x900 (i think). When I hook up to my dell monitor 1680x1050 my menu bar disappeared. So I switched it to 1360x768 and all my items were back. When I switched it to 1680x1050 right after, the items remained.
The aspect ratios of the two screens are the same. I have a 1280x1024 which this has happened on - I still have to see if it works on that.
Just glad I don't have to reboot to fix this one.

RIGHT SIDE OF BRIDGE INTERFACE "FADED OUT"

Similar Messages

Maybe you are looking for