Right side of the inspector?

Is there a way to choose what to display on the right column? It use to show the Master strip, now it's on one of the sends... Can't figure out if there's any way to change it back or control that...

Sorry... I forgot to say, I'm talking about the Arrange window. The inspector shows two tracks, the one you select in the Arrange (left side) and then there's the one on the right side. I can't figure out how to control/change the right side...
Thank for replying though

Similar Messages

In previous versions of i Tunes you could highlight a song in your library and there would be a genious list on the right side of the screen showing songs like the one highlighted in the library. Now I do not get that list. Is there a way to get this back

In previous versions of i Tunes I could highlight a song in my library and a genious list would show on the right side of the screen listing songs that were like the one highlighted. Now I do not get that list. Is there a way to get that back?

Hi again Bob,
I believe I've found the feature you were speaking about now. Information on the "In the Store" feature of iTunes can be found here:
Apple - iTunes - Inside iTunes - Using In the Store from within your iTunes Library.
http://www.apple.com/itunes/inside-itunes/2013/01/using-in-the-store-from-within -your-itunes-library.html
Thanks for using the Apple Support Communities. Have a good one!
-Braden

How do I get rid of the annoying "exportPDF" bar on the right side of the screen that blocks much of the document?

How do I get rid of the annoying "exportPDF" bar on the right side of the screen that blocks much of the document?

Hi soreankles,
To hide the toolbar in Reader, choose View > Show/Hide > Toolbar Items > Hide Toolbars.
Best,
Sara

The right side of the screen of my MacBook Air a yellow line appears very thin and dotted. What can I do to eliminate it?

The right side of the screen of my MacBook Air a yellow line appears very thin and dotted. What can I do to eliminate it? Marco

Reset PRAM. http://support.apple.com/kb/PH4405
If this does not help, contact Apple.
Best.

'list all tabs' arrow - how can I move it to the right side of the tabs?

I want to have the 'List all tabs' arrow on the right side of the firefox window.. just to the left of the 'minimise/restore/close' set of buttons. The 'Open a new tab' button can be moved -- why not also the 'list all tabs' button?? Very frustrating. Much Google-fu has not yet found a solution to this simple problem... help?

Hmm, by default that little downward pointing triangle is at the right end of the tab bar. Could you go back into Customize mode and try dragging anything that appears to the right of it back around to the left of it?

How can I remove the list of 20 recently saved items when you click on the arrow on the far right side of the File Name screen for images, web pages, ect?

When I right click and go save image/page/ect as the file save popup screen appears and on the right side of the File Name bar there is an arrow. If you click the arrow it shows the last 20? items that have been saved and their save location. Is there anyway to not have the list of recent items there or at the very least a way to clear them? I'm running Firefox 17 on Windows 7.
Also when you save items as you were typing in the name you want to save them as it used to show filenames with the same name as you type that are saved in that directory so instead of typing the whole filename or copy/pasting you could start typing a filename and then hit the up or down arrow, backspace and just change the end of the filename without having to retype the entire filename.
Hopefully you understand what I mean and can help me fix it, thanks.

It's in the proper directory. I can scroll down the window on the right and see the files but if I start typing the file name of one of them the autocomplete drop down thing that shows matching file names does not appear. In the back of my mind I'm starting to think a setting got changed and then the list of matching file names stopped appearing but I can't recall what setting may have been changed, if it was a firefox or microsoft change or for certain if anything got changed at all. Yeah I know I'm not helping my own cause but what can you do.

My search box in the upper right side of the screen changed from Google to Ebay without intentional action on my part and I have been unable to find a way to get rid of the ebay search tool and get google back.

When I first went to do a search using the search box on the right side of the toolbar I noticed it had a different icon. It was so so small I did not recognize it as Ebay until I hit search and it was then I realized my search tool had somehow been changed. The only use my wife had made of the computer since the prior evening was to view an email from the president of a local charity sending an updated roster of officers. I did look at the user profile file and saw that it showed the profile changed as of 7:46 am which was when my wife looked at the email. I tried deleting the file but firefox would not run without it so I restored the file. Our internet security program is Avast.

Here's a simple explanation of how to fix the problem:
https://support.mozilla.com/en-US/kb/Search%20bar
Worked for me today!! (Even when opening a new browser window.)
Cheers!
Shaunalei

How can I get a scroll bar at the bottom of the page so I can see the right side of the page when I am using two windows?

With two or three pages open, I have scroll bars that allow me to see the right side of the other pages, but not on the Firefox page.

Thank you for the reply, Fred, but when I went to my saved screenshot, I realized that the shortcut on my desktop had opened in IE, not Firefox. There is no scroll bar and the directional arrows do not work. My daughter has been playing with my laptop again. When I set up the same conditions with Firefox, there is no scroll bar, but the arrows function properly, so I can read to the right edge of the page. Now to find someone who knows IE11. Thanks again, for your reply.

How do you adjust Firefox to print what is on email page without adding a 1 inch left marghin to that page as it cuts off some of the right side of the page?

When I receive an email the page often has a certificate that I would like to print. Using the print function at the top of the page brings up the email as a page as it looks in my web email. When I hit the print button on that page there is always a 1 inch margin added to the printed page cutting off the right side of the desired page to be printed.
My printer accepts what ever I send it from word, pdf files as they appear on the screen, Why doe Firefox not send the same images as is displayed to the printer?
This seems to occur whenever the screen shows an image that is almost border to border and not text. When a margin is part of the email message or it is text this doesn't seem to occur.
HELP Please. I really need to be able to print what is displayed to print the proper document.
Thanks
Bob Ferguson
Sonoran Consulting & Finance, LLC

Some pages add their own margin to the minimum margin set in Page Setup. First you might reduce the margin here:
Alt+f (displays the classic File menu) > Page Setup > Margins & Header/Footer tab
Second, you could try using Shrink to Fit. However, if the image is a background image rather than part of the content of the page, that might not have any effect.

HP LaserJet 2820 All-in-One fails to print on right side of the page

I have HP LaserJet 2820 All-in-One for 1.5 years now and before the first set of cartridges run out of ink, the printed page comes out blur or no printing on the right side of the page. No smear on the right page. It doesn't matter if I used color or black printout, the right page still come out blur or prints.
I replaced all new HP OEM cartridges, I then replaced HP OEM fuser RG5-7602 located on the bottom back of the printer, reset the page setting menu and as a result the problem still exists. In one year and half, the total cost for the printer and replacement of cartridges and fuser came out to be almost $1407 and now I can't use the printer. I don't want to junk the printer or spent hundred of dollars more to resolve this problem. If any one encountered this issue before, I appreciate if you can guide me to resolve this problem. Thank you so much

hi everyone
i have same problem on hp clj2820, half page printed, half page
1) i cleaned laser mirrors and verify conectors and wires of laser scanner unit ... the problem persist
2) i inspected carousel assembly, a small plastic gear on the upper left side was wrong aligned, 1 tooth scrolled up or down, i fit this tooth in correct position ... the problem persist
what is happening?, regards

The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

Short answer:
Click Hide Song(s), it is what you wanted to do...
Long answer:
iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
tt2

Updated to Firefox 18.0 and now the windows are wrapping improperly, with more and more of the right side of the window showing up on the left as you go down.

Updated to Firefox 18.0 on a MacBook running Mac OS 10.6. Non-static areas of the window (url & search boxes, main area of window, etc.) now display incorrectly, looking like what happens when a program thinks the image is (for example) 500 pixels wide, when its actually 512 pixels wide. Each line after the first starts with what's "leftover" from the line above it, resulting in an image that appears slanted, with what should be the right side of the image appearing on progressively more on the left side of the image. No other programs (including Safari) seem to be exhibiting this problem, and it appeared immediately after the upgrade. Minimizing the window into the Dock, then re-opening temporarily fixes the problem. As soon as I scroll the window, the problem reappears.

I am having the same problem. the screen slants to the right making the navigation impossible, also some fields like the address bar are complely messed up-looks like a no signal TV screen. I have tried to reinstall and remove the plist file. Am using firefox 18 on a intel macbook running 10.5 thanks for any help

Using values in the right side of the shuttle on another page.

Hello All,
On page 1 I have a shuttle item. I select some values and move them to the right side of the shuttle. Now I need to navigate to a second page (currently I'm controlling the navigation with a button) and pass the values from the right side of the shuttle on page 1 over to page 2. How do I get the values from the right side of the shuttle on page one over to page 2. If it's easier to use a pop-up than a second page 2 I'd love to do that, but same problem, how to use the values from the right side of the shuttle?
I've tried setting up a shuttle on page 2 and setting the values on the URL re-direct but, no luck! I also tried a PL/SQL (On Load- Before Header) page process on the second page (see code below) where I try to "work with" the shuttle values, also no luck.
Any ideas?
Thanks Much!
declare
l_selected APEX_APPLICATION_GLOBAL.VC_ARR2;
l_set_id number;
l_loopcount PLS_INTEGER := 0;
BEGIN
l_selected := APEX_UTIL.STRING_TO_TABLE(:P6_UNGROUPED_SETS);
-- Loop through the array of selected fulfillment sets
FOR i IN 1.. NVL(l_selected.count,0) LOOP
l_loopcount := l_loopcount +1;
l_set_id := l_selected (i);
INSERT INTO TEST2
(SETS)
VALUES
(l_set_id);
END LOOP; -- Loop through Array
:p7_loopcount := l_loopcount;
end; -- Main End

Hello
>> I've tried setting up a shuttle on page 2 and setting the values on the URL re-direct but, no luck!
The value of a Shuttle item is a colon-delimited string. As colon is used as a special character in the APEX URLs (what we call the f?p notation) you can’t pass a Shuttle value using a URL (similar to the limitation of passing a traditional time notation like 10:00 in a URL, for the same reason).
Whenever you are submitting a page, APEX automatically saves the value of all the page items in session state, and it makes them available on any other page in the application. You can access them by using the bind variable notation with the item name (e.g. :P1_SHUTTLE1).
In your case, all you need to do is to submit page 1 (even if you don’t run any after submit activities) and then you can use the Shuttle item value from page 1 as the default value of the Shuttle item on page 2, or use this value in any other way on page 2. Just remember that the value is a colon-delimited string and for any other use other than a Shuttle default value, you most likely need to parse it first.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

Hello Mark,
It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right. >>>>>>>> plus some of the links within each.
The problem is well explored with much guidance on what to do and where to go.

Exporting to PDF cutting off right side of the page.

I am exporting a Crystal Report to PDF. This works perfect on our development and staging server. However, on the production server the PDF is cut off on the right. Like, instead of being 8.5" wide, it looks to be about 7.5" wide? It just cut off the right side of the PDF. Very weird. Republished the site but did not change anything.
But here's the odd part. We have another Crystal Report on the production server that exports to PDF just fine. Just this one report, "invoice2.rpt", is having issues. "invoice2.rpt" was originally copied from "invoice.rpt" so all of the settings (that I have looked at) are exactly the same. This report was formatted a little differently than the original.
Does anyone have any thoughts about what might be causing this to happen?
Thanks,
Randy

Hi Randy,
I have seen a similar issue in the past and the problem was due to the fact that some fields and or objects were placed in part or completely outside of the margins of the report. This can be checked opening the report from Crystal Reports > Design view.
I would suggest opening the report from Crystal Reports, select the option 'No printer' from File menu>Page setup and double-check that the report has been created inside the report margins (From Design View, the report space should be white except if the background colour has been modified).
If this does not help, please clarify if the issue is faced from Crystal Reports or from Business Objects Enterprise/Crystal Reports Server and the version you are using.
Thank you,
Selenia

Right side of the inspector?

Similar Messages

Maybe you are looking for