Right side speaker not working on my Mac pro

Hello
I have 15.4" Macbook Pro retina display. Realised a weeks ago that my right internal speaker is not working. Any way I can make it work or something I need to check, or should I take to apple care ?
Regards

System Preferences > Sound > Output > Internal Speakers/Headphone
Settings for the selected device:
Balance:
Make sure that the slider is set at middle.
Applications/Utilities/ Audio MIDI Setup.app
Audio Devices window
Side Bar
Click the Built-in Output.
Make sure that CH1 and CH2 volume sliders are matched.
Best.

Similar Messages

  • Sound not working on my Mac pro

    the sound is not working in my Mac pro. The sound icon on the top right hand corner is a pale gray. I went to systeme preferences/sound and I could not see anything particular.
    Thanks for your help

    Have you tried a PRAM reset?
    http://support.apple.com/kb/ht1379
    Ciao.

  • My laptop is hp pavilion g series & its right hand side speaker not working.. please assist me.

    hi i have hp laptop productname is HP pavilion g series, i have purchased it before two months & now its right hand side speaker stoped working so.. please assist me.

    Does anyone ever answer these?
    Seriously LESS than Happy.
    Not even done paying it off and the right side speaker doesn't work. Dude, I should have got a Dell.
    Spoiler (Highlight to read)

  • Hello I have problem of external speakers, right side speaker is working but left side speaker is silent

    Hello all
    I am using iPhone 4s from 3 months
    It was Gud but from a few days itz right side external speaker is working but left side is silent

    If one is speaker and other is mic
    Why the sound of ringtones got very slow even the volume in the settings is at maximum level

  • Sd card reader & USB port (right side only) not working

    I recently purchased a Macbook Pro 15" retina display with OS Moutain Lion. The SD card reader and USB port on the right side of the computer do not work. I've restarted the computer numerous times, tried to reimage the computer with the Control+R during restart (didn't allow for update because Mountain Lion was loaded on the system), and downloaded with the latest updates but they still do not work. I am currently deployed to Afghanistan so Apple Support calling me back isn't going to work. Any help would be appreciated.

    Hello :
    TNX for your reply.
    Unfortunately, I do not own a 2 gig mem card to test with. What perplexes me is that when I watch device manager and open properties boxes for the USB dev, SMSC-2228 dev,  and the newly created disks, the Win XP drivers do indeed load, but watching it do so is sloooooooowwwwwww. Slow as in 3 - 5 minutes for the win drivers to load in place. Funny thing is, an xD mem card or Memory stick initialize, set up properly in a matter of at most 5 - 10 seconds or so. The only card type I have a problem with is THE MOST COMMON ONE, the SD card. Maybe a Micro/Mickey soft thing? Some info I found on the SMSC controller claims it supports the larger sd card sizes, so I think this is a Micro / Mickey soft thing. I guess I need to search for some better drivers somewhere.
    TNX for now

  • Help! Logic Express 8 does not work on my Mac Pro with OS 10.5.1

    Hello, I hope somebody around here is able to help me.
    I have got a new Mac Pro with one Quad core processor since yesterday and it works fine except for Logic Express 8 (version 8.0.1). Whenever I start Logic the program crashes as soon as "Core Audio initialisieren" is shown in the display. I have tried to reinstall the program, deleted it completely and installed it again. It is always the same.
    Has anyone else experienced this problem? What can I do about it? I am a musician and I really need Logic Express to run.

    Confused. 10.6 is DVD based. Only Lion and above are downloads.
    And best install is not to upgrade. Do a clean install  - on another drive.
    Corrupt partition tables or bad sectors or no room to adjust the partitions or the directory is corrupt.
    ERASE the drive if Repair Disk didn't work.

  • IChat screen sharing does not work on my Mac Pro

    I have a weird iChat screen sharing problem that i can't seem to resolve on my Mac Pro. Ever since i got my Mac Pro in early 2008, using the screen sharing feature in iChat has always been flaky. I have never gotten to the point of getting it consistently working. Lately, i have not been able to get it to work at all.
    Most of the time, when i choose to share my chat target's screen (or when i share my screen), i would be able to see my chat target's screen and use the mouse for several seconds before the shared screen session is ended. The errors that i am getting are:
    +"Disconnected from Screen Sharing because:+
    +No data has been received for the last 10 s..."+
    +"There was a communication error during your chat.+
    +No data has been received for the last 10 seconds. You can send+
    +details about this problem to Apple to help improve future versions of+
    iChat."
    On other occasions (mostly when i am trying to troubleshoot this issue by testing in the same network with my Powerbook, which is on 10.5.6 as well), i get this error:
    +"Disconnected from Screen Sharing because:+
    +Screen sharing could not be established."+
    I have tried to do screen sharing via iChat with other Macs in the same network and also on the internet but with the same problems.
    Initially, i thought this may be router related. But the fact that iChat screen sharing on my Powerbook works perfectly both in intranet and internet eliminates my router as the culprit.
    I have also tried disabling the OSX Firewall but the outcome was the same.
    I read some posts that there may be issue with using the external iSight web cam. I unplugged it, cleaning up all the iChat-related caches and preferences and tried again but with the same result.
    I have also tried connecting to iChat using several different account types (mobileme, .mac and AIM) but the end result is the same.
    I run a Ubuntu VMWare fusion VM on my Mac Pro as my webserver. I thought that may be the problem. Shutting down the Ubuntu VM also does not help.
    Applecare support personnel also instructed me to re-install iChat but that did not help as well.
    One interesting error i noticed in the system.log (seen via the Console app) that is generated everytime iChat screen sharing fails on my Mac Pro:
    +12/23/08 12:32:00 AM /Applications/iChat.app/Contents/MacOS/iChat[507] error getting server version+
    I am really running out of ideas on what else i can do to get this resolved.
    Thanks in advance for any suggestion.
    Message was edited by: Changren Yong
    The audio and video chat portions of iChat work fine.

    I managed to make some headway in my attempts to troubleshoot this problem. I did a fresh Leopard install on one of the drives in my Mac Pro. I then proceeded to update it to 10.5.6. After that, i launched iChat and attempted screen sharing with my Powerbook. The first few attempts failed, with the following symptoms:
    - i would be able to see and control the Powerbook's screen
    - after 5 seconds, my screen sharing session is disconnected
    I then unplugged my external iSight. After i relaunched iChat, i managed do screen sharing in iChat without being disconnected!!! When i connected the iSight back into the ACD, with iSight off, i attempted to screen share again. This time, it failed after about 5 seconds, just like earlier. I then turned iSight on. This time round, the screen sharing session was not disconnected!!
    So in addition to the iSight issue, something in my original Leopard startup disk is causing iChat screen sharing to fail because even when screen sharing was failing on my fresh Leopard install, i do not see this error:
    /Applications/iChat.app/Contents/MacOS/iChat(507) error getting server version
    So if i can figure out what is causing this error to show up in system.log, then i can manage the iSight issue.

  • Rear Audio Jack not Working on New Mac Pro

    Hello All,
    Here's the deal. I just pursuaded my company to buy a brand new Mac Pro to run FCP Studio 2 as a test run to see if they perform well enough to eventually replace our remaining PC's. We've had the Mac Pro for less then two weeks and I'm running into an issue that I can't resolve, and I don't want to fall on my face. The rear Audio input jack keeps failing. Meaning sometimes it works and sometimes it doesn't when speakers are plugged into. The jack on the front works fine, but the rear jack doesn't appear to recognize the speakers after the computer is shut down then restarted. You have to restart the computer 2 or 3 times before the speakers start pumping out sound. Which in all honesty is extermely dissappointing to me. And if I have to bring this thing in to get serviced, my boss will not move forward with buying anymore Mac Pro's, which I'm working hard to make happen.
    Please help me out.
    Thank you all for your time

    Try resetting the SMC: http://support.apple.com/kb/HT1806?viewlocale=en_US.
    Also try resetting the PRAM: http://support.apple.com/kb/HT1379.

  • ATI catalyst drivers not working properly in Mac Pro late 2013

    Hi, I have a 6-core Mac Pro late 2013 with two D500 ATI graphics cards and installed Windows 8.1 Pro through bootcamp. I have installed the bootcamp drivers while in windows installation, however there is a problem opening the Fire Pro drivers (catalyst drivers). I get a message that says something like "there is no option to change so the software will not run". I also tried to download the ATI drivers directly from their site, but still get the same problem.
    This poses a problem for me since I need windows for a specific lighting design software that I work with -Dialux-, and it uses Open GL, which doesn't seem to work in my configuration. Does anyone have any similar problem or solution?
    Please help. Thanks.

    Does the reader show up under USB in System Report?
    If the reader is working properly both the reader and an inserted card will show up.

  • KVM switch not working on new mac pro

    Why won't my Belkin KVM switch work on my new mac pro

    Which way does it not work?
    Can you boot up with the switch to the Mac?
    Can you then switch to the other computer but not back?

  • Any reason a G5 Graphic card will NOT work in a Mac Pro as a second card

    Should I try this?  I don't see any reason why not but would like to make sure
    Thanks

    Should I try this?
    No.
    It won't work.
    Any reason a G5 Graphic card will NOT work
    As explained, the G5 uses Open Firmware and the Mac Pro uses EFI.
    The ROM of the graphics card is completely different for each of the two machines.
    The cards are not interchangeable.

  • Optical Audio not working on 2006 Mac Pro 1,1 after 10.6.7 update

    Hi all,
    I have no digital audio output on my 2006 Mac Pro after I updated to 10.6.7. System Preferences recognizes the output but their is nothing coming out. The digital audio port goes from steady red at startup to dark, indicating that it is not receiving anything. I have switched to another digital audio cable with no effect whatsoever.
    I reset the SMC with no effect. I have read online that other users are having this issue as well. I appreciate any input or insight into the issue.
    Thanks!
    Message was edited by: nomadmnemonic

    Thanks for the reply a brody.
    It has been 3 months and the issue still persists and has not gone away.  I agree with pantufl that my Mac has become buggier since 10.6.7.  The doc I read and reread didn't do anything except change the frequency rate.  There is still no sound.
    The update to 10.6.8 didn't resolve anything except prepping it for 10.7
    This is extremely frustrating especially since I recently upgraded to a 55" Samsung LED LCD monitor and Onkyo HT S7300 system.  I also recently upgraded to EyeTV HD and use my Mac as my HTPC. 
    I will try the feedback post to see what Apple has planned, if anything.

  • USB keyboard not working on new Mac Pro with Mavericks

    I just bought the new Mac Pro and my apple USB keyboard won't work. I have a very old apple USB keyboard that is working but I want to use my newer one. The newer keyboard is a full one also, including the number pad.
    Thanks

    no difference in ports just troubleshooting, ie if it didn't work on any of the 4 ports, likely a kb issue
    if it worked on one of the other 3 ports, you have a broken usb port on the mac pro

  • The USB ports on the right side are not working.

    HP G71-340US NOTEBOOK

    tstevenson08,
    It sounds like a hardware issue honestly, as discussed in a previous thread regarding this issue.

  • Sound not working on apple mac pro.

    Hi for some reason the speaker on my apple macbook pro has stopped working. I can still use headphones however. When I attempt to mute the volume or change it the icon still appears but with a stop sign below it, a circle with a line through it. Has anyone seen this before.
    Thanks

    Hey Tillybling!
    Here is an article that will help you troubleshoot this issue:
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

Maybe you are looking for

  • Multiple itunes (libraries) for multiple ipods

    I have read the FAQ's in several places and my specific situation is not addressed so here goes... I just got a new computer and when loading my itunes library/ipod and my wife's itunes library/ipod I would like to do so without setting up a second u

  • Add User to Group Behavior

    Hi all I found this post that explains the same issue I'm having, but the marked answer isn't relevant to my environment. I've built a user creation runbook, using 2012 R2 and this Active Directory Integration Pack. Everything works properly, except

  • Boot Camp, Expose, Trackpad & Dock issues after waking from sleep 10.6.1

    Hello, Here's my setup: 13" MBP (Late 2009) 2.26 GHz Intel Core 2 Duo 2 GB 1067 MHz DDR3 500 GB HD (Seagate Momentus Non G-Force version) OSX 10.6.1: 367 GB Boot Camp MS Windows 7 RTM: 123 GB All of this started yesterday. After pressing the power bu

  • Difference in using EC02 and OX10 for Creating new plants

    Hello experts, I would like to know the impact of using both the transactions Thanks Imraan

  • Reading sub folders in ifs using the ifs api

    hi, Is there any way i could get all the sub folders under the parent folders ,using the ifs api. i am able to get the all the folders starting from the root ( parent folders) but i am unable to get the folders under each parent folder. for example a