Right stylus (mainly for note/annotation): Targus 3-in-1 (stylus/laser pointer/pen) or Wacom bamboo solo?
After reading several good reviews about Wacom bamboo stylus solo ($30), I deceided to buy one for my iPad 2. But today, I found Targus 3-in-1 (stylus/laser pointer/pen) for just $20 (original price around $40). Now I am bit confused.
Can the users of these styli please suggest if Targus 3-in-1 will be better buy than Wacom bamboo stylus ($30) in terms of quality and value for money (as it is on sale now)? I know that only laser pointer costs around $20. Do you still suggest that for $20 Targus 3-in-1 (Stylus/laser pointer/pen) will be unworthy (compared to Bamboo) on quality & durability aspect!
Mogger wrote:
Version 0.10.10-15 fixed it.
Version 15 added driver side support for d6 and d7 models, that means CTH-460/K and CTH-461/S aka Wacom BambooPT 2FG 4x5 and Small. They should be fully working out of box now.
BUMP
i bought one wacom cth-460 today "056a:00d6 Wacom Bamboo Pen & Touch (CTH-460)"
i have tried all drivers in aur + standard archpackages
no one works
the drawingboard works just fine in windows
where did you get Version 0.10.10-15 ?
testing have just Version 0.10.9-1
Similar Messages
-
Searching for notes/annotations
I make annotations within Reader on my tablet (abdobe reader 10.4.2 ) and then want to spot the notes easily to facilitate editing when I get back to the master document on my PC.
There's a "view comments > annotations" function in adobe reader X on my PC, but I can't find a similar funtion on the tablet version of the software . . . and if I copy an annotated file back to my PC, the annotations drop out in the process.
Is there anything I can do besides looking through all 400 pages of the document looking for the occasional annotations I made?Hi,
We are aware of the issue and we have the "Comment List" feature present in our backlog. We can't commit on the timeline but we will try to provide the feature in the future.
Thanks ! -
How do I specify the right Y axis for an annotation in cwGraph?
Hi,
I'm useing MS 7.0 under LW/CVI 7.0 on Windows XP.
I have a cwGraph in an ActiveX container with 4 plots on it. I'm using
annotations, but when I specify the coordinates of the cwShape (or
cwCaption) object, it always uses the Y axis
of the first plot. So when I try to put an annotation on the 2nd plot,
the Y coordinate is wrong (since it uses the Y coordinates of the first
plot).
I tried associating plots with the cwAnnotation object but it didn't seem to help.
How could I associate an Y axis with one of these objects?
Thanks in advance,
svkHi Phyllis,
The two axes on a bar chart are the Category axis and the Value axis. The category axis consists, generally, of a list of titles. Always text. For this reason, the Chart feature expects the Category axis data to be in a Header Column, usually Column A. (Header columns always default to text format, unless forced to something other than Automatic or Text.)
With your Category titles in Header Column A and your various parts of the value in columns B, C, etc., Select all the data columns and then Insert the Stacked Bar Chart. Your Categories should be properly displayed.
Jerry -
All of the websites and books (elements for dummies from amazon, etc.) seem to focus on windows. The Elements for Dummies even says that Adobe stopped supporting Elements after 4.0. My CD says 7.0 Win/6.0 MAC. How can I find more info on how to use it, besides the manual that came with it? I am not that interested in photo manipulation, but would like to use it for digital painting.Photoshop Elements
With OSX Yosemite around the corner and the next version of PSE due (normally September/October) most books can’t keep pace with the Adobe Creative Cloud which guarantees to keep you up to date.
The Photography plan at $9.99 pm is probably the future. -
I am looking for an application that would allow me to open a word doc, and take notes in the .doc using a stylus pen. I'd then like to convert those notes to text, and then be able to copy / paste those notes into an email. Does this app exist? It seems like we were doing these same types of things with Palm Pilots years ago, one would think this would work with iPads?
I don't believe it will open a Word document, but Writepad allows for handwritten conversion of notes to text and then to email. Might help you some of the way...
-
I am looking at buying a MacBook Air over the Pro mainly for the 12 hour battery. Just wondering if battery is compromised by upgrading to 8mb and upgrading to I7 Intel dual core. I am not very tech savvy so apologies if dumb question
If both computers were configured identically, then they would both lose the same amount of battery life with respect to the same starting configuration - comparing apple to apples. I don't know how much the added RAM, etc. would reduce battery life, but it would be less for both models.
Battery life is a tricky subject because most mfgr.s like to suggest as long a life as possible, but often do so under a set of conditions that are not common to most users. Apple is no different. Their computers do have good battery life, however. But not likely as long as what is in the ads for the typical user. -
I've downloaded the newest version of softwear to my iTunes libary (iOS 10.5 i believe) iTunes store now dosn't function right and i'm not able to sync. my iPod 4G with my libary. i've tried to reinstall iTunes, but for no use. help please.
well i have to be honest, but i don't know if it the vista you use has any significance for this. but you can try.
okay follow:
1: click "start" on the status line on the buttom of your screen.
2: then click on "all Programs" and find "Accessories" and find the "command prompt"
3: Right click with your mouse "command prompt" and click on "run as administrator"
(as you has click'd on "run as administrator", "command prompt" should appear.)
4: when it appears you need to type this "netsh windsock reset"
5: wait for your computer to registrer the command you gave it, and restart your computer.
then erverything should be pretty much as good or better then new. -
Hi i did buy second hand imac. 10.6.8 there is not iphoto. what iphoto is right to dawnload for use?
hi i did buy second hand imac. 10.6.8 there is not iphoto. what iphoto is right to download for use?
You can get iPhoto/iLife '11 so the newest one.
-
I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing (supported by MobileMe), I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose! The other thing they don't tell you is that Mountain Lion disables OfficeMac, and I am considering uninstalling it for that reason - do I get my money back?!
You stated; "Mountain Lion disables OfficeMac"
That is not true.
Mountain Lion does not have Rosetta so it is not capable of executing PowerPC code. If you have MS Office 2004 that is coded in PowerPC code and will not run in Mountain Lion. What you need to do is upgrade to an Intel version of Office.
Allan -
I started the lastest iPhone 5s software update then my phone just shut down and will not turn back on. I've tried the home button, the button plus the top right button together for 20 sec, plug it in and nothing
Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.
-
i have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency.
and I need to work on music not only in time but the battery after that.
I ask for help pleaseThanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
Search for Main Group Not all Subgroup
Search for Main Group Not all Subgroup
My illustrator project may have 5 main groups, which may all included 100 subgroups. I would like to search for main group without having to search through all subgroup, because too many and too long for the script.
For the moment I have given a name to all Main group but the process is much too long.
Marcel
tell application "Adobe Illustrator"
activate
set groupCount to count group items in current document
repeat with i from 1 to groupCount
set selection of current document to {}
set groupRef to group item i of current document
set groupName to name of groupRef
if (groupName contains "MainGroup") then
set selected of (groupRef) to true
display dialog groupName
end if
end repeat -- with groupCounter from 1 to groupCounter
end tellI don't do AS but this seems to be the culprit
set groupCount to count group items in current document
count your groups in the current "Layer" to narrow it down to main groups only, groups within groups will be ignored. -
Main Menu:Not enough disk space for asset encoding
i tried to burn my project first i got an error that in track 1 i've got no assets/videos and i added an asset, then a problem with the story and dragged the same story in both columns.. now i tried to burn again and got this error
Main Menu:Not enough disk space for asset encoding
Build cancelled
Building was not successful. See log.
any help appreciated. Thanks in advanceSounds like your hard drive is getting full. You need as much space on your drive as you can get - at least as much as the disc contents, twice. If you are burning a DVD-R at 4.7Gb then allow ten Gb free space before you start.
-
how do i solve this in order for the e reader to open the file?“this document is protected by DRM ( adobe digital rights management ) and is not currently authorized for use with your adobe id
thnaksThis is something you will need to talk to the publisher of the document. They might have to do something to allow you to open the file. (If you changed Adobe ID since buying the file, for instance, they might have to allow for that).
-
Main circuit not found in spice netlist
Hi all,
I'm trying to import a .cir file for vishay 6N137, however I keep getting the error main circuit not found in spice netlist. Does anyone know what is wrong with the spice file? I've pasted it below.
** Spice3 Model **
** -- 6n137,VO2601/11, VO0600/01/11 ---
** High speed 10 Mbd, NMOS output, enable- high
** 12/02/2009 mfc
** test conditions:VCC=5V, RL=350, CL=15pF, IF=10mA
** characteristics: VF=1.4V, ITH=5mA, VEH=2V, VEL=0.8V
** VOL=0.6V, tpLH=TpHL=70nS, tr=22nS, tf=17nS
** Model Node - Symbol - Pin
** 1 (DA) A 2
** 2 (DK) K 3
** 3 (GND) GND 5
** 4 (VO) VO 6
** 5 (VE) VE 7
** 6 (VCC) VCC 8
.SUBCKT 6N137 DA DK GND VO VE VCC
DD1 DA 6 DEMIT
vV1 6 DK DC 0
hH1 1 GND vV1 600 ;5mA -> 3.0V
AU1.A [1] [DU1.A] ADC_A
AU1 [DU1.C DU1.A] [DU1.Y] XBUF_H ;DIGITAL BUF WITH CTL
AU1.C [VE] [DU1.C] ADC_C
AU1.Y [DU1.Y] [2] DAC_Y
R1 2 5 1K
R3 VCC VE 6.4K
**QQ1 VO 5 GND Q_NPN ;OC OUTPUT
XQ1 VO 5 GND Q_NMOS ;NMOS OUTPUT
.MODEL DEMIT D
+IS=1.69341E-12 RS=2.5 N=2.4 XTI=4
+EG=1.52436 CJO=1.80001E-11 VJ=0.75 M=0.5 FC=0.5
.MODEL Q_NPN NPN
+ IS=100P BF=100 NF=1.0 BR=1.0 TF=0 TR=0 CJE=1P CJC=1P CJS=1P VAF=1.0E30
.SUBCKT Q_NMOS 1 2 3
CGS 2 3 12E-12
CGD 1 2 6E-12
M1 1 2 3 3 MOST1 W=9.7M L=2U
.MODEL MOST1 NMOS(LEVEL=3 KP=25U VTO=2 RD=45)
.ENDS
.MODEL XBUF_H D_CHIP ( BEHAVIOUR= "
+; BUFFER W/ H-ENABLE 3-STATE CONTROL, 100 NS L-H(RISE) H-L(FALL) DELAY
+/INPUTS C A
+/OUTPUTS Y
+/TABLE 2
+; C A Y
+ L X Z
+ H X A
+/DELAY 1
+;INPUT OUTPUT RISE_DELAY FALL_DELAY
+ A Y 50N 50N
+/CONDITIONAL_DELAY 4
+;EVENT TO CONDITION OUTPUT MIN/MAX TIME
+ ZH C (C=L) Y MAX 0
+ ZL C (C=L) Y MAX 0
+ HZ C (C=H) Y MAX 0
+ LZ C (C=H) Y MAX 0
+")
.MODEL ADC_A ADC_BRIDGE (IN_LOW= 2.8 IN_HIGH = 3.0 )
.MODEL ADC_C ADC_BRIDGE (IN_LOW= 0.8 IN_HIGH = 2.0 )
.MODEL DAC_Y DAC_BRIDGE (OUT_LOW= 0 OUT_HIGH = 4.0 OUT_UNDEF = 0)
.ENDS 6N137
**==================================================================*
* Note: *
* Altough models can be a useful tool in evaluating device *
* performance, they cannot model exact device performance *
* under all conditions, nor are they intended to replace *
* breadboarding for final verification! *
* Models provided by VISHAY Semiconductors GmbH are not *
* as fully representing all of the specifications and operating *
* characteristics of the semiconductor product to which the *
* model relates. *
* The models describe the characteristics of typical devices. *
* In all cases, the current data sheet information for a given *
* device is the final design guideline and the only actual *
* performance specification. *
* VISHAY Semiconductors does not assume any liability arising *
* from the model use. VISHAY Semiconductors reserves the right to *
* change models without prior notice. *
**==================================================================*Hi everyone!
I am having the same problem with this spice code
I follwed the instructions in the NI Whitepaper www.ni.com/white-paper/3173/en/
Can anybode help? Thank you very much
* AMP04 SPICE Macro-model
* Description: Amplifier
* Generic Desc: BiPolar, InAmp, LoPwr, single supply
* Developed by: JCB / PMI
* Revision History: 08/10/2012 - Updated to new header style
* 1.0 ( 05/1994)
* Copyright 1994, 2012 by Analog Devices, Inc.
* Refer to http://www.analog.com/Analog_Root/static/techSupport/designTools/spiceModels/license/spice_general.h... for License Statement. Use of this model
* indicates your acceptance of the terms and provisions in the License Statement.
* BEGIN Notes:
* Not Modeled:
* Parameters modeled include:
* END Notes
* Node assignments
* Rgain1
* | IN-
* | | IN+
* | | | V-
* | | | | REF
* | | | | | Vout
* | | | | | | V+
* | | | | | | | Rgain2
* | | | | | | | |
.SUBCKT AMP04 1 2 3 4 5 6 7 8
* INPUT STAGE
R1 2 9 2E3
R2 9 11 2E9
R3 11 12 2E9
R4 3 12 2E3
IB1 2 98 22E-9
IB2 3 98 21E-9
VOS 12 13 25E-6
D1 9 10 DY
D2 1 10 DY
D3 12 14 DY
D4 8 14 DY
* 1ST AMP GAIN STAGE, POLE AT 0.44 HZ
EREF 98 0 (60,0) 1
G1 98 15 9 1 1E-3
R5 98 15 1E9
C1 98 15 362E-12
* SECOND POLE AT 1 MHZ
G3 98 16 15 98 1E-6
R6 98 16 1E6
C2 98 16 159E-15
* OUTPUT STAGE
E2 22 98 16 98 1
R14 22 1 200
* 2ND AMP GAIN STAGE, POLE AT 0.44 HZ
G2 98 17 13 23 1E-3
R7 98 17 1E9
C3 98 17 362E-12
* SECOND POLE AT 1 MHZ
G4 98 18 17 98 1E-6
R8 98 18 1E6
C4 98 18 159E-15
* CMRR STAGE
E1 98 19 POLY(2) (2,98) (3,98) 0 5 5
R9 19 20 1E6
R10 20 98 1
* OUTPUT STAGE
E3 21 98 18 98 1
R11 21 8 11E3
R12 21 23 11E3
R13 23 5 100.2E3
* OUTPUT AMPLIFIER INPUT STAGE & POLE AT 10 KHZ
R15 29 4 5.16E3
R16 28 4 5.16E3
I1 7 30 10UA
EOS 27 3 POLY(1) 20 98 30E-6 1
Q1 29 8 30 QX
Q2 28 27 30 QX
R20 8 6 100.2E3
CIN 28 29 20E-12
* SECOND GAIN STAGE AND SLEW CLAMP
R71 31 98 1E6
G71 98 31 28 29 48.2E-6
D30 31 32 DX
D40 33 31 DX
E10 7 32 POLY(1) 7 98 -0.5 1
E20 33 4 POLY(1) 98 4 -0.5 1
* OUTPUT STAGE
RS1 7 60 1E6
RS2 60 4 1E6
ISY 7 4 0.124E-3
G7 34 36 31 98 5.5E-06
V3 35 4 DC 6
D7 36 35 DX
VB2 34 4 1.6
R22 37 36 1E3
R23 38 36 500
C6 37 6 50E-12
C7 38 39 50E-12
M1 39 36 4 4 MN L=9E-6 W=1000E-6 AD=15E-9 AS=15E-9
M2 45 36 4 4 MN L=9E-6 W=1000E-6 AD=15E-9 AS=15E-9
D8 39 47 DX
D9 47 45 DX
Q3 39 40 41 QPA 8
VB 7 40 DC 0.761
R24 7 41 375
Q4 41 7 43 QNA 1
R25 7 43 50
Q5 43 39 6 QNA 20
Q6 46 45 6 QPA 20
R26 46 4 23
Q7 36 46 4 QNA 1
M3 6 36 4 4 MN L=9E-6 W=2000E-6 AD=30E-9 AS=30E-9
.MODEL QNA NPN(BF=253)
.MODEL MN NMOS(LEVEL=3 VTO=1.3 RS=0.3 RD=0.3 TOX=8.5E-8
+ LD=1.48E-6 WD=1E-6 NSUB=1.53E16 UO=650 DELTA=10 VMAX=2E5
+ XJ=1.75E-6 KAPPA=0.8 ETA=0.066 CJ=0 L=9E-6 W=2000E-6)
.MODEL QPA PNP(BF=61.5)
.MODEL QX PNP(BF=12500)
.MODEL DX D
.MODEL DY D(BV=6.0)
.ENDS
Maybe you are looking for
-
Calling stored procedure in Access but data stored in SQL
Our data is stored in SQL, but due to some restriction I need to make stored procedure in Access instead of SQL. I created the relevant link in Access to call the tables in SQL. Whenever I invoke the SQL database in Access, a login screen will appear
-
Add a classpath for as3 in the users Flash preferences?
Is this possible in the mxi file? Or do I attach another "self executing file" to it? Is there anyway I can add a bash file into the mxp file that gets executed upon installation? I have installed 2 mxp's at work form 2 different companies, and both
-
Hey, I have weird problem with clone my DB. I am using clone DB to create duplicate test db, anyway i already create 5 DB using the same procedures successfully today i faced weird problem i know when you i create the control file, i am suppose to cr
-
Serious errors were during Font Validation.
I am getting this message during installing font: Serious errors were found. Do not use this fonts. What does it mean. I am fresh Mac user
-
My credit card information is correct in itunes, but I keep getting a message to put in my security code. This is the same account I have always used. what do I do?