Right tab doesn't align properly when using leading decimals (for TOC)

I have a problem. I'm using the latest version of Pages. When I create a table of contents and use the right tab with leading decimals, they don't align straight on the right side. No matter what I do, they are always off a bit.
I also have MS Word, and I can do the contents with right tab just fine with no problems.
Any ideas?
Thanks,
Bryan

Ok just found a workaround/solution.
(always happens right after I ask, for some reason).
Rescaled my project but kept the size and positions the "same and centered".
Then I replaced all my background images with bigger versions (previously I had cropped them at the right and bottom).
Now my backgrounds were all great, but all my objects were too low.
All I had to do was ctrl+A to select everything on a slide, and then change the Y value for the whole bunch to zero.
This magically placed all objects in their correct respective spots.
Hope that helps someone out!
Russ

Similar Messages

Tag-copying doesn't work properly when using "Edit in..."

Hi folks!
I make use of Nik-plugins a lot to finish off my pictures. That's why I often use the "Edit in..." context-menu for hand over my Lightroom images to the Nik software. Usually I have tagged my images before, so I expect the created TIFF-file to receive the same tagging. But somehow that's not what happens.
The situation: I'm working on images which are tagged with a certain keyword, i.e. only these images are shown (I clicked the right-arrow on the category to show exactly those images). I hand over the file to the plugin (edit in...). LR creates the TIFF-file. The selection of the image I've created the TIFF of disappears, no new image is selected. I edit the image in the Nik product and save it. Afterwards I cannot see the image in my LR category. I have to switch to the "All Photos" view, find it there, select it, uncheck (strange!?) the tagging for the image, recheck the tagging and then switch to that tag again.
Does anyone have the same problem? Does anyone have a solution? This really slows down my speed...
Regards,
Kopi

Hi folks!
I make use of Nik-plugins a lot to finish off my pictures. That's why I often use the "Edit in..." context-menu for hand over my Lightroom images to the Nik software. Usually I have tagged my images before, so I expect the created TIFF-file to receive the same tagging. But somehow that's not what happens.
The situation: I'm working on images which are tagged with a certain keyword, i.e. only these images are shown (I clicked the right-arrow on the category to show exactly those images). I hand over the file to the plugin (edit in...). LR creates the TIFF-file. The selection of the image I've created the TIFF of disappears, no new image is selected. I edit the image in the Nik product and save it. Afterwards I cannot see the image in my LR category. I have to switch to the "All Photos" view, find it there, select it, uncheck (strange!?) the tagging for the image, recheck the tagging and then switch to that tag again.
Does anyone have the same problem? Does anyone have a solution? This really slows down my speed...
Regards,
Kopi

Screen doesn't align properly when closed on my NEW macbook

It is slightly out towards the right hand side. Like my old powerbook was after I dropped it once. I have NOT dropped this one. Should I return it? Could I return it?

Ring apple 0800 039 1010 for free, it clearly isnt an acceptable fault.
They'll put you through to someone that'll help.
I'm sorry to hear this, but good luck.

Site doesn't display properly when viewed in Windows 8.1 and IE11

Web site doesn't display properly when viewed in Windows 8.1 and IE11. Site html and css validates no errors at W3C. Any ideas?

The following is what I see in IE11 on a Windows 8.1 system, no difference using Firefox, Chrome or Safari on the same system.

HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
Russ

Error in Acrobat 9.0 when using png prediction for flatedecode filter

Hi,
I am creating a PDF using png prdiction and Acrobat 9.0 shows the following error: "insufficient data for an image". The same PDF doesn't show error when using Acrobat 7.0 or any other application to view it. A typical code is as following:
"10 0 obj <</Length 7100038/Filter FlateDecode/DecodeParms<</BitsPerComponenet 8/Colors 4/columns 1103/Rows 1000/Predictor 15>>....etc."
Does anyone have idea what can be the problem & how can I solve it???
Thanks
Ilana Keydar

Attached is another PDF which I have added png prediction to the flatedecode
filter of the images in order to get better compression. This file can't be
open at all using Acrobat 9.0, but can be viewed using other PDF tools.
I have also uploaded another PDF to the forum.
I hope you can help me
Ilana

When using Appleworks database for printing labels can I have columns of different widths?

When using Appleworks database for printing labels can I have a column of different width?
Case in point, the supplied avery labels in Appleworks does not have 8195. When I build one using custom design I need a small column between column 2 and 3 to line up the info in columns 3 and 4. All the labels are 1.3/4 inch wide but I need to insert a column 1/4 wide to match up with the avery page....
Any ideas???
Thanks......
---warren

Well, the issue is that when you creat a custom width of 1.3/4 from the edge of the first label to the edge of label 2 all is good. The right and left margins were also set correct in AW. The Avery page, for some reason, has a small 1/4 inch column between the columns of label 2 and 3 therefore making the distance between the left edge of the label in column 2 and the right edge of the label in column 3 - a width of 2 inches and not 1.3/4.
I guess Avery wanted the page to look even.
I did this work around.....
I created a custom lay out of 2 columns (not 4) with the correct width of 1.3/4 from label edge to label edge and the correct left side margin. After printing the first page I just turned the sheet 180 degress and printed the 2nd page to use all the labels on the Avery sheet. Since the upper and lower margin were the same it worked great....
"Great minds think alike"... thanks for your suggetion

When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

When using quick edit for compressed CSS, edge code does not jump to the particular class but displays the whole thing. This destroys the whole purpose. Does anyone know a fix or extension for that.

I suspect that beautify doesn't touch CSS that it is not aware of (e.g. new properties/syntaxes, vendor-prefixes). See if there's a newer version available.
Which compressed CSS are you using? Most CSS libraries come with both compressed and original stylesheets, so use the original one during development/debugging, and switch to the compressed one for deployment.
Randy

Our iMac (intel, 11.2) freezes up when using Time Machine for Back Ups. We have 16GB of RAM and the BU drive is 1 TB on firewire.

Our iMac (intel, 11.2) freezes up when using Time Machine for Back Ups. We have 16GB of RAM and the BU drive is 1 TB on firewire.

See Pondini's TM FAQs for starters.

I need to get 2 decimal places when using a formula for a quotient and Numbers will only give me whole integers which is useless since most items will be less than 1. How can I change this?

How do I get 2 decimal places when using a formula for a quotient? It only gives me whole integers. Most of the results will be less than 1 so I need 2 decimal places

the quotient function returns only whole number portion of the dividing two numbers. If you want the actual decimal value use the divide operator. you enter this as:
A/B
if the numerator is in A1 and the denominator is in B1 you can enter the formula like this:
=A1/B1

Commenting a Line in ABAP Editor when using SAP GUI for java

Hi,
In ABAP editor we can highlight the line which are to be comment and use cmd+< sign to comment those lines. What will be the command to be used to achieve the same functionality when using SAP GUI for JAVA on an iMac.

Hello Kedar,
please check with SAP GUI for Java 7.20 rev 5 before submitting a bug report.
Also please verify, that cmd-< and cmd-> are not assigned as "Keyboard Shortcuts" in the "Keyboard" control panel of "System Preferences".
Bug reports can be submitted with the [SAP Message Wizard|http://service.sap.com/message], for SAP GUI for Java please use component BC-FES-JAV.
Best regards
Rolf-Martin

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

Volume control when using Apple TV for playing video

Hi,
I'm using a pair of active speakers with no built in volume control with my Apple TV. When using the ATV for streaming audio (for example Spotify) I can control the volume with the iOS device I'm using as the source, but not while streaming video. Why is that, and, is there anything I can do about it?
//J

does the sound on the pad work for face time when you are using in on the pad, with no apple tv involved?
If so - apple tv uses a ton of resources. Facetime uses a ton of resources. facetime over the TV is hit or miss.
doulble tap the home button, and see what is in the rask bar. Close off everything else by touching and holding an icon until they jiggle, the close them by touchinmg the minus sign.

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
        Mockery context = new Mockery();
        final MessageListener messageListener = context.mock(MessageListener.class);
        final Latch latch = new LatchImpl();
        final String prefix = "test" + System.currentTimeMillis();
        context.checking(new Expectations() {
                oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                will(new CustomAction("release latch") {
                    @Override
                    public Object invoke(Invocation invocation) throws Throwable {
                        latch.unlatch();
                        return null;
        final Connection connection = createConnection(null, null);
        Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
        connection.start();
        Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
        Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
        final MessageConsumer consumer = session.createConsumer(wildcardTopic);
        consumer.setMessageListener(messageListener);
        MessageProducer producer = session.createProducer(null);
        producer.send(destination, session.createTextMessage("MSG1"));
        latch.await(5000);
        connection.close();
        Thread.sleep(5);
        context.assertIsSatisfied();

Check where your MDB sends the [response] messages to.

securityagent name when using IBM TAM for SSO with Hyerion

Hi,
What should we declare in the css_config.xml file for the <securityagent>, when using IBM TAM for SSO with Hyperion.
The admin guide only mentions Netegrity, but that would be the case when we use Siteminder for SSO.
Any lights??
Thanks,
Sasi

While, seems one way is to use stream to bypass login.

Right tab doesn't align properly when using leading decimals (for TOC)

Similar Messages

Maybe you are looking for