Right way to exit an applet

Hi,
I am making an applet by extending JApplet. Can anyone please tell what's the right way to stop the applet ie. to complete its execution.
Shoud System.exit() be used, i tried stop and destroy , nothing happened. I have provided a menu inside my applet i want it to exit or complete execution with its window removed when some clicks on exit menu.
Any suggestion is welcome.
thanks
inder

Don't use System.exit in applet, won't work, and would probably throw a security exception.
Only "destroy" your applet by overriding the destroy() method (where you do some clean up, close open connections, release references that takes a lot of memory, etc, nothing else). This method is called by the browser, at least when you close it.
The stop() method should not try to destroy your applet. I think if the browser calls stop(), it will also call start() to start the applet again, but without calling the init() method. The init() method is called if the browser needs to run your applet first time, or again after destroy() has been called as far as I know.
You can get more info if you read the javadoc comments for those methods.

Similar Messages

Proper way to exit openbox

Hi,
I'm running latest Arch with native systemd + slim +openbox.
I think that a recent change has changed the way that slim + openbox is working.
slim.service is working and I can log in
openbox is started via .xinitrc using exec openbox-session
in a terminal I see that
$ loginctl --no-pager show-session $XDG_SESSION_ID | grep Active
Active=yes
so session management with systemd-logind appears to be working. However, I can only logout once from openbox using openbox --exit.
The first time I do this slim reappears and I can log back in. The second time logout gets bumped to the console; I can restart slim.service to get back in.
How should I be starting openbox ie do I need ck-launch-session / dbus-launch any longer?
How should I be exiting openbox? Is openbox --exit the right way?
Is this the same issue as https://bbs.archlinux.org/viewtopic.php?id=151304

Hi.
With systemd-logind as session manager, you should not use console kit and the 'ck-launch-session' which comes with it.
If you created your ~/.xinitrc from the '/etc/skel/.xinitrc' template and so have these lines in it:
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
you don't need to use the dbus-launch command either, as a session dbus instance is already existing.
Personally I don't use slim but only startx, and I want to return to a console prompt when I exit openbox.
I use the 'Exit' action in the main menu (I don't see the command line --exit parameter in the doc).
In your case, you want to return to the slim login screen, and if it doesn't return to it, I tend to think it is a problem with the slim service file.
Is there a 'Restart=always' in it?
Last edited by berbae (2013-04-26 16:02:12)

The correct way to exit Swing app?

Just want to be sure, what is the best and correct way to exit standalone Swing application?
Right now I can't think of anything better then System.exit(0);*

How about setting the main JFrame's setDefaultCloseOperation to JFrame.EXIT_ON_CLOSE, and then when you want to exit, calling dispose on this JFrame?

The "right" way to handle multiple devices, accounts and the cloud?

Perhaps a bit premature, but I figure it's never too early to start planning.
Here's our current setup - I currently have four iDevices in the faily (three iPhones and one iPod Touch. All are syncing to the same Mac Mini, albeit with different logins (and different iTunes store ids). All four of these are kept in sync via Home Sharing so we have access to the music/apps/etc acquired by the others.
Enter the iCloud - how does this fit in? What's the *right* way to do this?
I can see two options:
1)     Continue to utilize four iTunes store ids, sync them via Home Sharing and add four iClouds
     Advantages
          totally independent devices, users, etc.
     Disadvantages
          must pay for four "iTunes Match" services to access non-iTunes music on each of the four devices
          will iTunes-purchased music automaticaly sync to iCloud if it is shared via Home Sharing (or only by the original purchaser)?
2)     Use one iTunes Store id for all iDevices
     Advantages
          single point of acquisition and distribution for all devices
     Disadvantages
          need to find a way to merge IDs (is this even possible?)
Are there other advantages/disadvantages to these options? Are there other options? What's the easiest to set up and support? Any other thoughts?
Thanks in advance for your input.

Well it seems like the first thing you should do is consolidate your iTunes libraries so that you don't have 4 copies of everything, one for each user logged in to your Mac Mini. How you do that is consolidate all 4 iTunes folders to one folder located in the /Users/Shared/ folder and update each of your iTunes to point to that folder accordingly. That way you have one iTunes library, only one copy of your media, but accessible from multiple users.
One caveat is that if somebody is logged on and has iTunes open, you can't fast switch to another user and open iTunes. Apple made it so that only one user and one instance of iTunes can open a iTunes library at a time.
For your iTunes match situation, it does sound like you would be much better off sharing a single Apple ID with one iTunes Match. For consolidating, make sure you have everything everybody has shared via Home Sharing to the main account you'd like to move over to, and then simply go to each device Settings, Store, and the sign out of the original Apple ID and logon using the shared main Apple ID. I just looked at it and the automatic downloading is already live in iOS! You can specify if you want to do music, apps, and books separately in case you may want to automatically download music but not apps or books.

Problem with slideshow in iPhoto. Photos look like they are all the right way up but when in slideshow action some are sideways.

even though all photos look like they are the right way up, when the slideshow commences, some of them display sideways. I have tried re-rotating them - and still have same problem. Help please - need it for Saturday night !

What version of iPhoto are you using? Are you creating the slideshow directly from an album or are you using the slideshow mode?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT

How to create a custom panel in the right way (without having an empty panel in the file info) ?

Hi Everyone
My name is Daté.
I'm working in the fashion industry as a designer and Design consultant to help fashion brands improving the design workflow by using Adobe softwares and especially Illustrator.
I'm not a developper, but i'm very interested about the possibility to introduce xmp technology to provide more DAM workflows in the fashion industry.
Fashion designers produce a lot of graphical objects in illustrator or Photoshop. Unfortunately they are faced to a big challenge which is about how to manage, search, classify and get this files faster. Of course PDM system or PLM system are used in the Fashion industry to manage data, but for many companies, implemanting this kind of database is very complex.
When i look at what you can do with xmp, it seems to be an interesting way of managing design files, then i started to follow Adobe instruction to try to build a custom panel.
The main idea is to (Theory) :
create custom panels used by fashion designers to classify their design files.
Use Adobe Bridge to search files, create smart collection to make basic reports in pdf and slideshows
Find someone to make a script able to export metadata in xml files
Use indesign and the xml file to generate automatically catalogues or technical sheets based on xmp values
I have created a custom panel by using the generic panel provided by Adobe and i have modified the fields to feet with the terms used in the fashion industry and it works well.
But unfortunately, when i try to create my own custom panel from scratch with Flashbuilder (4.6) and the Adobe CSExtensionBuilder_2 (Trial version), it doesn't work!
Here is the process :
I have installed flashbuilder 4.6
I have download the XMP Fileinfo SDK 5.1 and placed the com.adobe.xmp.sdk.fileinfo_fb4_1.1.0.jar in C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
In Flashbuilder, i have created a new project and select xmp Custom panel
The new project is created in flashbuilder with a field with A BASIC Description Field
To generate the panel, right click the project folder and select xmp / Publish Custom Panel
The panel is automatically generated in the following folder : C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels
Go to illustrator, Open the file Info
The panel appears empty
The others panel are also empty
The panel is created and automatically placed in the right folder, but when you open it in Illustrator by selecting the File Info option in the File Menu, this custom panel appears empty!!! (only the title of the tab is displayed). This panel also prevent the other panels to be displayed.
When you delete this custom panels from the folder C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels and go back to the File Info, the other panels display their content properly.
I also try to use the plugin XMP Namespace designer to create my own namespace. this plugin is also able to generate a custom panel, but this one also appears empty in AI or Photoshop.
I try to follow the process described in Adobe xmp documentation many times, but it didn't works.
It seems that many peaople have this issue, but i dodn't find a solution in the forum.
I try to create a trust file (cfg), but it didn't work.
It would be so kind if you can help me to understand why i can't create a custom panel normally and how to do it in the right way.
Thanks a lot for your help,
Best regards,
Daté

Hi Sunil,
After many trial, i realize the problem was not coming from the trust file, but from the way i have created the custom panel.
There is 2 different ways, the first described below is not working whereas the second is fine :
METHOD 1 :
I have downloaded the XMP-Fileinfo-SDK-CS6
In the XMP-Fileinfo-SDK-CS6 folder, i copied the com.adobe.xmp.sdk.fileinfo_fb4x_1.2.0.jar plugin from the Tools folder and i pasted it in the plugind folder of Flashbuilder 4.6
The plugin install an XMP project
In Flashbuilder 4.6 i have created a new project (File / New /Project /XMP/XMP Custom Panel)
A new xmp project is created in flashbuilder.
You can publish this project by right clicking the root folder and selecting XMP / Publish Custom Panel
The custom file info panel is automatically published in the right location which is on Mac : /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0 or /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0
Despite the publication of the custom file info panel and the creation of a trust file in the following location : "/Library/Application Support/Macromedia/FlashPlayerTrust", the panel is blank in Illustrator.
I try this way several times, with no good results.
METHOD 2 :
I have installed Adobe CSExtensionBuilder 2.1 in Flash Builder
In FlashBuilder i have created a new project (File / New /Project /Adobe Creative Suite Extension Builder/XMP Fileinfo Panel Project)
As the system display a warning about the version of the sdk to use to create correctly a custom file info, I changed the sdk to sdk3.5A
The warning message is : "XMP FileInfo Panel Projects must be built with Flex 3.3, 3.4 or 3.5 SDK. Building with Flex 4.6.0 SDK may result in runtime errors"
When i publish this File info panel project (right click the root folder and select Run as / Adobe illustrator), the panel is published correctly.
The last step is to create the trust file to display the fields in the panel and everything is working fine in Illustrator.
The second method seems to be the right way.
For sure something is missing in the first method, and i don't understand the difference between the XMP Custom Panel Project and the XMP Fileinfo Panel Project. Maybe you can explain it to me.
So what is the best solution ? the right sdk to use acording to the creative suite (the system asks to use 3.3 or 3.5 sdk for custom panels, so why ?)
I'm agree with Pedro, a step by step tutorial about this will help a lot of peaople, because it's not so easy to understand!!!
Sunil, as you belong to the staff team, can you tell me if there is :
A plugin or a software capable to extract the XMP from llustrator files to generate XML workflows in Indesign to create catalogues
A plugin to allow indesign to get custom XMP in live caption
A plugin to allow Bridge to get custom XMP in the Outputmode to make pdf or web galeries from a smart collection
How can you print the XMP data with the thumbnail of the file ?
Thanks a lot for your reply.
Best Regards
Daté

Right way of configuring higher MTU over a Port Channel

Hi guys,
I have a running critical Port-Channel between two locations.
Here's the config
SW1:
interface Port-channel2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
end
interface GigabitEthernet1/45
switchport trunk encapsulation dot1q
switchport mode trunk
channel-protocol lacp
channel-group 2 mode active
end
interface GigabitEthernet1/46
switchport trunk encapsulation dot1q
switchport mode trunk
channel-protocol lacp
channel-group 2 mode active
end
SW2
interface GigabitEthernet1/1
switchport trunk encapsulation dot1q
switchport mode trunk
channel-protocol lacp
channel-group 2 mode passive
end
interface GigabitEthernet1/2
switchport trunk encapsulation dot1q
switchport mode trunk
channel-protocol lacp
channel-group 2 mode passive
end
interface Port-channel2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
end
Now I need to increase the MTU from default value to 9198. What the right way to do it and avoid any connectivity loss, PortChannel restart.
Does it matter what switch I start first?
Thanks!
L.E. both SW are WS-C4948

Hi,
Because you are using layer 2 interfaces - there is no fragmentation support at layer 2, and interfaces receiving frames which have an unsupported size will be dropped.
I think the best way for you to proceed is to lab this up; and verify what happens - it may be that you need to make changes on switches at either end of the channel within a very short time frame to prevent too large an outage.
When you are ready to maike your change - think the best way to do this is to use the interface range command, and apply the 'mtu' command to all the interfaces in this range. I don't think it matters which switch you apply this change to first, and I don't believe if you are hinting at the 802.3ad (controlled by system-priority) decision maker, that it makes any difference.
HTH
Mike

Right way of login form...

Hello
I am a really newbie in web programming. I want to write a web application with JSF. I wonder what is the rgiht way of creating the login form. I tried to write a page segment file for it but page segments do not have prerender method so it cannot be fully controlled...I want something like that:
login control will be two parts..
if login info is not found in session, than it will show the login form.
if the user is found in session, than it will show the menu for the user...
but i couldnt do that because prerender methos is not available in page segments..
what is the right way for doing that kind of thing?

Indeed implement a Filter.
Once an user logs in, put the User object in the HttpSession. Let the filter check on this User object. If this User object is null and you're not in the login page, then redirect to the login page.
Do a Google search on "LoginFilter implements Filter" or "UserFilter implements Filter" and you'll find lot of examples.
http://www.google.com/search?q=%22LoginFilter implements Filter%22
http://www.google.com/search?q=%22UserFilter implements Filter%22
Here is an advanced one which actually doesn't redirect if the User object doesn't exist, but this might give you some new insights: http://balusc.xs4all.nl/srv/dev-jep-usf.html

Right way to dispose frame/components/containers?

Hi,
My application creates a lot of frames with lots of containers and components (heavyweights as well as light weights) inside them. I have obeserved that none of the frames/containers/components get finalized unless I do a remove/removeAll() over the respective container. Currently I just make a call to frame.dispose() to dispose it off and assume that all components would be reclaimed by the garbage collector at some point of time. Is that the right way to dispose off the frames and mark all its child components for garbage collection? Or is an explicit call to removeAll() required to release the memory. I am aware that garbage collection doesn't happen immediately and may take a while before the GC collects objects. I have run the application continuously for couple of hours and created/disposed a lot of frames during that period. GC recollected none of them (none of the components either) except for those that were removed by an explicit call to remove or removeAll during the lifetime of the session. I even hit OOM errors but none of the components were recollected.
What could be the problem?
Some additional information:
I overridden removeNotify() and finalize() methods to see what's going on. For all components removeNotify() was called (even if I don't do explicit remove/removeAll and just dispose off the frame) but finalize never gets called. My methods:
     public void removeNotify()
          super.removeNotify();
          System.out.println("Remove notify called "+compId);
     protected void finalize() throws Throwable
          super.finalize();
          System.out.println("Finalized component "+compId);
     }Thanks in advance.
Edited by: crack_it on Jul 31, 2009 8:52 AM

Sorry to bother guys. The problem was not with AWT but with one evil component that was displayed inside most of my Frame classes and was also registered as an Observer with an Observable class. The event at which the component was supposed to unregister itself with Observable never got fired and this one reference prevented garbage collection of entire gui brigade. Damn! Tiny monster.
Anyway the issue stands resolved. Thanks for your time.

Right way to validate form fields !!

Hi,
I am having a form with many fields including TextFields, Dropdowns, DateFields, Checkboxes, Radiobuttons etc.
I am validating the most fields by making them REQUIRED. But I didn't found way to make Checkbox field required. So I am doing it by script by making its MANADATORY property to true. I am validating fields at the Form's preSubmit event.
All I want to know that whether it is the right way to validation i.e.
Making field.mandatory = true; (for checkboxes or may be some other field too)
Check it at preSubmit event of the form;
I want to code it according to best practices. That's why this question bounces up in the mind.
Thanks.
Abhinav

Thank you for your replies!
I understand how to get data into a JCombobox,
but what about my bigger, general question?
"I am confused because in other parts of my program I get a database connection and am not sure if you just form a query each time you need data or store the results somewhere (vector, array, collection)and use it this way." when the data or parts need to be used again.
This is the help I need.
Thanks again1
Alan

Right way to configure Tomcat JDBC resource for MaxDB

Hi,
i need to configure one tomcat server with a pool of connections for a MaxDB instance with follow database parameters:
MAXUSERTASKS=150
SESSION_TIMEOUT=60
i do this configuration on tomcat:
<Resource name="jdbc/myApp"
                auth="Container"
                type="javax.sql.DataSource"
                username="DBUSER"
                password="secret"
                driverClassName="com.sap.dbtech.jdbc.DriverSapDB"
                url="jdbc:sapdb://dbserver/DBNAME"
                maxActive="150"
                maxIdle="75"
                validationQuery="SELECT NOW() FROM DBA.DUAL"/>
is this the right way? there is a way to check if the pool is working at database side? at java side i checked that the javax.sql.DataSource.loginTimeout is Unavailable, then what is the better way to avoid errors like:
2008-06-02 13:54:36 2165 WNG 11824 COMMUNIC Releasing T187 command timeout
i think that this problem occurs because the SESSION_TIMEOUT is 60, and the loginTimeout is Unavailable at javax.sql.DataSource then the DBCP of tomcat dont know when need to revalidate the session.
thanks for any help.
Clóvis

Hi Clovis,
to be honest, I'm no Tomcat expert at all. All I can do is read the documentation.
The error message you posted was about an timeout due to a too long idle session.
From the changes in your connection pool setup I cannot see any parameter that would influence this.
Instead - as already written - you may either want to change the session timeout in general, for the user or (by adding some connection parameters) for the sessions.
Concerning the question on wether it's better to have many connections or just a few - well this depends on what the java tasks do with the sessions.
The connection pool is used for saving resources on the database side and the time necessary to logon and create a session.
So whenever any of the java tasks needs a db connections it should "just get one" from the pool.
When you have "high load" (by the way what exactly does that mean? High CPU usage on the J2EE server? Huge transaction volume? Many parallel transactions?) this does not change.
Anyhow you have to be aware of the fact that the database can only process as many SQL requests in parallel as there are user kernel threads (UKTs) and each of the UKTs need to be able to run on a seperate CPU core. Therefore if it's necessary to have real parallel SQL activity many connections may not be the best idea.
On the other hand this requirement is seldom necessary - most often sessions can wait a bit until they get the reply from the database and synchronize on each other later on. At least that's how we do it with NetWeaver.
KR Lars

Right way to communicate with a socket server (TCP/IP)

Hi,
I used to write data from my J2ME socket client to a J2EE socket server with writeUTF(). In this way I can send (and receive) directly Strings.
When I need an XML file I ask the server with something like os.writeUTF(GIVE_ME_XML_FILE) and I use an XML parser with this socket InputStream.
I was wondering if it's the right way to proceed ....?
How do you guys communicate with a server when you need "to talk" a lot ? Do you use only HTTP requests or (if you are allowed to) do you use Socket with writeUTF ?
Just to know if I'm completely wrong....and if I gonna have unsolicited issues ...
Thanks..

AdrienD wrote:
When I need an XML file I ask the server with something like os.writeUTF(GIVE_ME_XML_FILE) and I use an XML parser with this socket InputStream.
I was wondering if it's the right way to proceed ....?No, it is not. Read the writeUTF api docs, and you'll know why!
How do you guys communicate with a server when you need "to talk" a lot ? Do you use only HTTP requests or (if you are allowed to) do you use Socket with writeUTF ?There is answer to this question. it al depends on what data gets send where, how often, and how large..

Right way to "Share" with iDVD

I just tried to share a 30-second clip to Media Browser and it will apparently take 10 minutes. Sharing to iDVD seems to be quicker but doesn't seem to actually work with iDVD (at least not for me). What's the right way to send movies to iDVD - both so it works (obviously) and doesn't take forever. Thanks.

Here's the latest. I was able to "successfully" share a project into iDVD. Except this time there's no sound when I play it in iDVD. I do only have about 16G of free space - perhaps will clear some more off and try again.
Here's the other thing...in iDVD when I click on media>movies, for the project I just shared to iDVD, it appears with a message reading "This iMovie project can't be used because it hasn't been prepared for sharing yet. To prepare it for sharing, open it in iMovie and choose Share > Media Browser...." And yet the project is already in the DVD window and I can view it (albeit without sound).
I don't have iMovie HD - only iMovie 4, which always worked fine but isn't nearly as easy to edit with. Of course for all the problems I'm having I probably would have more than made up for the extra time spent editing.

Right way for battery charging

Hi everybody! I bought an iPad Air when he was released. Surfing on Internet, I've heard conflicting opinions about the right way to charge the iPad (or the iPhone) to increase its battery life. What I want to ask is this: iit is true that once a month you have to bring the battery to 0% and then charging it?

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- %20beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Poor battery life after installing iOS 7.1? Try these simple tips
http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Right Way to change MBOs Connections

Hellow Experts,
I'm really enjoying the communication here, and I got a new one.
Whats the right way of change MBOs Connections to SAP for instance?
I tried 2 methods.
Method One
Title: Its just too much Work
Proceeding:
I start rebinding every MBO and operatios to the new Connection.
Drawback:
If i have 1 MBO it may takes 30 seconds if they are 40 or 50 mbos it will take a lot of time.
there are the output tables from bapis are recreated if dont they are deleted.
so you have to reimplement all the operations one again. and it as the adicional
problem that we all can miss something and do something wrong.
Method Two
Title: Simpler way
Proceeding:
change the connection profile itself at workspace from DEV->QA or QA->PRD
Drawback:
supposing that you want independence between the apps connections like app1 is on DEV and ap 2 is on PRD.
this will led to N connections per N applications.
DEV: (Development)
QA: (Quality)
PRD: (Production)
I would like to know if you guys have more approaches and what you think of this ones.
Cheers,
Laguerta

Daniel Laguerta
I will never follow method one as suggested by you.
To add for the "Method 2", i will create a separate (new) workspace for different instance like DEV, QA, PROD.
eg. Once DEV is done, i ll export the whole project, and import the same in a new workspace for QA.
Create a new SUP QA and SAP connection profile
Change connection profile to each mbo and its operations.
And deploy to SUP QA Env
Still it is time consuming.
there is another method (should be preferable)
Deploying mbo package from SCC instead of creating workspace and connection profiles.
Deploying MBO from Sybase Control Center (SCC)
Regards,
JK

Right way to exit an applet

Similar Messages

Maybe you are looking for