Rim.desktop.autodate.exe has stopped working

both my PC the rim desktop ...aske to download new update...says rim.desktop.autodate.exe has stopped working...any suggestions thanx

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

ApplePhotoStreams.exe has stopped working on Windows 7 x64

same as the title.
The message "ApplePush.exe has stopped working" appears for a long time, and today, a new message "applephotostreams.exe has stopped working" appeard.
I using Windows 7 Ultimate x64 Chs on HP Z800 workstation.
How can I fix this?

Same issue, Upon start up I get this error (attached)
Have tried choosing check online for solution, it spins and spins, then poof, the dialog box simply closes, nothing, no tab open in the browser with possible solutions, no reply that a solution couldn't be found. If I go into iCloud panel, PhotoStream has a check mark in it and the same error pops up again. HOW do you uninstall applephotostreams.exe? It is NOT listed in my Programs & Features in Control Panel. By doing a 'Search Desktop' I can see it is located in Program files (x86)/Common files/Apple/internet services... how do I properly delete it and reinstall? (It is working FINE between my iPad and iPhone, and until yesterday had been working just fine on my PC (Win 7 64bit) Thank you

Applephotostreams.exe has stopped working on Windows 7 PC

applephotostreams.exe has stopped working. Windows 7 PC.

Same issue, Upon start up I get this error (attached)
Have tried choosing check online for solution, it spins and spins, then poof, the dialog box simply closes, nothing, no tab open in the browser with possible solutions, no reply that a solution couldn't be found. If I go into iCloud panel, PhotoStream has a check mark in it and the same error pops up again. HOW do you uninstall applephotostreams.exe? It is NOT listed in my Programs & Features in Control Panel. By doing a 'Search Desktop' I can see it is located in Program files (x86)/Common files/Apple/internet services... how do I properly delete it and reinstall? (It is working FINE between my iPad and iPhone, and until yesterday had been working just fine on my PC (Win 7 64bit) Thank you

Kdbsync.exe has stopped working - win 7 64 bit

I am running Win 7 64 bit on an HP Pafilion HPE h8-1360t. After last week's round of updates my computer will no longer play mp4 files, the Media Center will no longer come up (Message: "Windows Media Player has stopped working"), You Tube files will no longer play, the HP Magic Canvas also won't come up, and the mysterious message "kdbsync.exe has stopped working" comes up when I reboot.
After hours of reading forums, I have found that it appears to be related to the AMD grapics card update. My computer has an AMD Radeon HD 7570 card.
On the AMD site this is listed as a legacy card for XP computers. I am not sure why HP installed it in a computer running Win 7 64 bit with an Intel Core I7 CPU. This does not give me confidence in HP equipment.
The AMD utility correctly detected my card and told me that I needed a driver called:
14-4-win7-win8.1-64-dd-ccc-whql.exe
But when I clicked on the Down load button, I got the message, "Could not conntect to server. Could not parse error."
I did not find any such driver on your website.
How can I get my Media Center working again?
This question was solved.
View Solution.

The idea of turning off all the non-Microsoft services scares me to death as I now have my computer running the way I want it to.
I also posted on the AMD forums as I had determined that their board was the offending piece of hardware:
http://forums.amd.com/game/messageview.cfm?catid=454&threadid=173935&forumid=11 You might want to read my reply to the agent who helped me.
Basically I had to uninstall all AMD drivers and sotware using Control Panel/Programs & Features and then run the AMD Clean Uninstall Program: http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx
Then install drivers from here:
http://support.amd.com/en-us/download/desktop?os=Windows+7+-+64#amd-catalyst-packages
I would not recommend that you install this set of drivers unless you are SURE that they are correct for your hardware. I could not use the Steps 1-5 on the AMD site because the last step required that you pick the operating system that your hardware is running. The video card that HP installed in my "latest and greatest" computer of a year ago was so old that the only operating systems offered in step 5 were XP and Vista! Be aware that HP does use legacy hardware in its newest computers.

Updated BB DM - and now will not connect (receive RIM HH Comm Mgr has stopped working)

Hello all,
This is what I get for updating my software (I should never do that) - - - but I did, and now when I start my BB DM I get the following error "RIM Handheld Communications Manager has stopped working".
I even tried re-loading an oldddd version of BB DM, and I still get the message.
I've rebooted, uninstalled, re-installed - etc etc - and of course RIM offers no customer support on their website for the Desktop Manager.
Anyone with any ideas - I would greatly appreciate it - - thank you.
John, MCPO, USN
Windows 7 - 64bit
BB DM 7.1 Build 42

Yep - I unchecked that block. But, good news, I found al 2011 version of BB DM and installed that and it is working perfectly......so, I will just never update again....lol

WRT400N setup.exe has stopped working

I just got a brand new HP Pavillion desktop with Vista 64 and I am having installation issues. Every time I put the setup disc in the drive it fails to load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried skipping the autorun and going in to my rom drive and manually selecting the setup.exe file. The initial splash screen appears and says please wait loading but I never get any farther than that because the program locks up. I thought maybe the disc was defective but I have tried it on an XP desktop and an XP netbook and the disc works fine on both of those. What gives? I have searched this entire forum and it seems like I am the only person having this problem. Is my new computer defective or is it the user
Solved!
Go to Solution.

Is the new Vista Dekstop is wired computer or wireless computer ?
Are you able to go online with the other wired and wireless computers ? If yes then, you do not need to run the CD anymore on the VIsta Dekstop.
If the new Vista dekstop is wired computer then, just connect the eternet cable from the computer to the router on one of the 4 eternet port and restart the computer and it should be able to go online.
If the new Vista dekstop is wireless computer then, try to locate your network and connect it using the secuity key(if the network is secured)...It should work !!!

Cvhelper.exe has stopped working

Prior to updating Mozilla to Mozilla 4 the download helper would convert downloaded videos to a chosen extension without problems.
However in following with the update to Mozilla 4 the download helper is unable to convert videos. Message reads:
"cvhelper.exe has stopped working windows will attempt to find a solution to the problem and will notify you"

Chances of you getting it to work corectly are miniumal in Windows 8/8.1 see this thread::
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Help-with-windows-support-A...
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

"SapDesignStudio.exe has stopped working"

Hi
I have Design studio 1.3 and I've built a model over a UNX
Everything was working fine untill today
and now after opening the model and a few seconds/minutes of working with it, I get error message
"SapDesignStudio.exe has stopped working" and I have to close Design studio.
It is woking fine in LaunchPad with no errors, so it seems there is nothing wrong with the model itself
Please help, I'm desperate
Shlomi

Chances of you getting it to work corectly are miniumal in Windows 8/8.1 see this thread::
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Help-with-windows-support-A...
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

YSLoader.exe has stopped working

I just reinstalled iTunes for Windows Vista after the MSVCR80.dll was not found. After reinstalling iTunes, the first time I tried to sync my iPhone 4 using iTunes, I got this message:
YSLoader.exe has stopped working
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             ATH.exe
Application Version:                           17.351.6.39
Application Timestamp:                     52a2a11f
Fault Module Name:                          objc.dll
Fault Module Version:                        1.528.0.29
Fault Module Timestamp:                  52a192bc
Exception Code:                                  c0000005
Exception Offset:                                00006be4
OS Version:                                          6.0.6002.2.2.0.768.3
Locale ID:                                             1033
Additional Information 1:                  fd00
Additional Information 2:                  ea6f5fe8924aaa756324d57f87834160
Additional Information 3:                  fd00
Additional Information 4:                  ea6f5fe8924aaa756324d57f87834160
All this started when I updated iTunes to the latest version. Seems to me Apple should take responsibility for causing this and be aggressive in fixing it!
Please tell me how to fix this!
Thank you.

I appreciate your help. I went to the link you supplied. In the first 2 steps the article says to:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
I found a lot of .dll files.
I found 9 .dll files in c:\program files(x86)\iTunes.
I found 2 .dll files in c:\program files(x86)\iTunes\iTunes.Resources:
     iTunes.Registry.dll
     iTunes.dll
I found this one in iTunes.Helper: c:\program files(x86)\iTunes\iTunesHelper.Resources\iTunesHelper.dll
In c:\program files(x86)\iTunes\Mozilla plugins\npitunes.dll
and
in C:\Program Files\iTunes
iTunesOutlookAddIn.dll
I did not find QTmovie.dll
Should I move ALL of the .dll files to my desktop? I'm afraid to do that.
I am able to open iTunes and sync with my iPhone successfully, as far as I can tell, despite getting the 'YSLoader.exe is not working' message. So I am hesitant to follow these steps.
I welcome your help and advice.
Thank you so much!

Webkitwebprocess.exe has stopped working

not sure how to stop my safari from crashing every once in a while; message shows as webkitwebprocess.exe has stopped working.
any help, most welcome! :-)

Chances of you getting it to work corectly are miniumal in Windows 8/8.1 see this thread::
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Help-with-windows-support-A...
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

HPSF.exe has stopped working. Uninstalling and reinstalling has not worked. What else to try

HPSF.exe has stopped working. Have uninstalled and uninstalled numerous times and has not worked. Desktop is not month old yet. When I first got it sleep mode would not work. Every time it would go to sleep it would crash. I finally did a refresh and that problem went away. I do not want to do another refresh as a number of the windows updates did not want to install and I had to troubleshoot them. Is there another fix to the support assistant or do I just manually check monthly for updates. Also is there a place I can get online chat cupport for my new computer while it is under warranty?

HP Support Assistant is very problematic especially in Windows 8. It works on some and not others, nobody knows why yet. It is a useless piece of software anyway IMHO and I would uninstall it. If you concern is updates, suggest doing it manually as you wish.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Re: "HPSF.exe has stopped working.

My dear professor Nuccii.
My problem is as the. the belowed.
Re: "HPSF.exe has stopped working. This application has encountered a serious problem and must stop-
I have been tryed to contact HP-support in denmark, but it is very difficult to get some people who by telephone. AND My english is not to good...But I will try.
RE.:my HP:
HP. pavillon Intel inside Core. i5. Serie nummer: CZC2093FRP.
Produktnr. HOM85.EA#UUW
It´s a. Windows 7 model.
that case I have been tryed to contact your HP support Forum. r Windows 7 baseret computer af jer.Og nu er der kommet en alvorlig fejl på som Microsoft påstår er HP opgave at få rettet.
I am not able to open any, of the microsoft office programs from the microsoft office pack 2010.
I have tryed to uninstall the microsoft office pack but is is not possible.
The worst of all is, that I am not able to go on the internet fra the computer. So I cant get help via installing programs/ or products from the internet.
I have been runnung a Diognostisering and the system tell that it is a system error 303.???
I have had a systemman to look at my computer, but he dont dare to touch anything with the computer. He says has it´scaring.
Jeg kan ikke åbne nogle af Office pakkens programmer, og jeg kan ikke afinstallere nogen af dem.
Jeg har haft en systemmand til, at se på det og han siger, at det er ikke godt, men han tør ikke røre ved det.
jeg har også kørt en diagnostigsering og der kommer en fejl Error 303.
jeg håber af hele hjertet at I kan hjælpe mig da jeg ikke har mulighed for, at købe en anden computer. Jeg har købt og installeret office2010 pakken....
I do also have a HP printer: HP officejet Pro 8500A plus
I do hope of all my heart that you are able to help me.
I have no chance for getting a new computer,
With all best regards
Beth Christina
Beth
HP Community Mailer skrev den 08.02.2015 14:20:
HP Support ForumsJoin the conversation!
Hi 0713miso,
Nuccii (Distinguished Professor) posted a new Reply in Desktop Operating Systems, Software & Recovery on 02-08-2015 06:20 AM
Subject: Re: HP.exe problem as all others. But I cant get help in that case that I cant go on the net.
Did this reply resolve your post or question?
If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
You can also show your appreciation by giving kudos.
We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
Thanks for being a member!
The HP Support Forum Team
Learn more about our HP Support Forums | View Site
HP.com Privacy Unsubscribe Update Settings
© Copyright 2014 Hewlett-Packard Development Company, L.P.

Harddisk 1 hurtig 303 betyder harddisk mislykkedes det kort test. Det betyder, at harddisken er ikke og skal udskiftes. Det første, du skal gøre nu, er backup af alle dine personlige filer mv
Den nye harddisk skal være af samme størrelse eller større til, hvad du har nu. Hvis du ikke er tryg ved at gøre det selv, har et værksted gøre det for dig.
Vidste du opretter en gendannelsesdisk, når du fik computeren, du skal bruge dem, når du ændrer harddisken. Du vil være i stand til at installere Office 2010 da, jeg håber du har din nøgle. Hvis du ikke har oprettet inddrivelse diske kan du bestille dem fra WorldWide websted: http://welcome.hp.com/country/w1/en/support.html
Eventuelle yderligere spørgsmål bør omfatte gøre af din computer, fx HP Pavilion g6-1234
Hard disk 1 quick 303 means the Hard Drive has failed the short test. This means that the Hard Drive is failing and will need to be replaced. The first thing you should do now is backup all your personal files etc.
The new hard disk should be of equal size or greater to what you have now. If you are not comfortable doing this yourself, have a repair shop do it for you.
Did you create recovery disks when you got the computer, you will need them for when you change the hard disk. You will be able to install Office 2010 then, I hope you have your key. If you did not create recovery disks you may order them from the WorldWide site: http://welcome.hp.com/country/w1/en/support.html
Any further questions should include the make of your computer, example, HP Pavilion g6-1234
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Error message: "application.exe has stopped working" under BEX event name on Windows 7 64-bit.

I am trying to run a third party program on my Windows 7 64-bit. It has an executable file.
1. When I double click on this file (appname.exe), I will see a GUI window.
2. In this GUI window, I will have to select a dynamic link library file (appDLL.dll) to load into the appname.exe that will run the application. This DLL file is compiled in Visual C++ 2010 Express based on a C source code under the Release Win32
mode.
3. It is supposed to run after step 2. Instead it give the BEX error message saying "appkernel.exe has stop working." There is no online solution at this time when I select that option to search for an online solution.
I can run this program on my Windows 7 32-bit computer. What does this error message mean? Why is there an issue like this on Windows 7 64-bit? How can I fix this issue? The detailed description of the problem is below.
Problem signature:
Problem Event Name:   BEX
Application Name:    appkernel.exe
Application Version:   0.0.0.0
Application Timestamp:   4f06397d
Fault Module Name:   MSVCR100.dll
Fault Module Version:   10.0.40219.325
Fault Module Timestamp:   4df2be1e
Exception Offset:   0008af3e
Exception Code:   c0000417
Exception Data:   00000000
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1033
Additional Information 1:   81c8
Additional Information 2:   81c8f46ed31e8fb8b45fcb166d97e96d
Additional Information 3:   eec1
Additional Information 4:   eec16e1825ff7aa9948f00b1f285bbaa
Thanks in advance!
LDL

Hi Brian,
Thank you for the reply!
The third party software provider wrote the source code in C. When I compiled this source code, the DLL file will be created in store in the Release folder in the same project directory of the source code.
I just double check my computer, I have the following Visual C++ packages installed on it:
1. Microsoft Visual C++ 2005 Redistributable
2. Microsoft Visual C++ 2005 Redistributable (x64)
3. Microsoft Visual C++ 2008 Redistributable - x64 9.0.21022
4. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17
5. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
6. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161
7. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
8. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.6161
9. Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
10. Microsoft Visual C++ 2010 x64 Runtime - 10.0.40219
11. Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
12. Microsoft Visual C++ 2010 x86 Runtime - 10.0.40219
13. Microsoft Visual C++ 2010 Express - ENU
14. Microsoft Visual Studio 2010 Service Pack 1
15. Microsoft Visual Studio 2010 Express Prerequisites x64 - ENU
16. Microsoft .NET Framework 4.5.2
17. Microsoft .NET Framework 4 Multi-Targeting Pack
From what I understand the Visual C++ 2008 Runtime is included in the Redistributable package.
Leo

PRINTER 6510 e-all in on. photo product core exe has stopped working?lang=en

i installed the 6510 all in one printer, it works great but the photo creation has a message that is (photo product core exe has stopped working). that should i do to fix it?
This question was solved.
View Solution.

Hi Puhu.
Please contact our customer support team at [email protected] They can help get you printing again.
Thanks for writing,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Photo Stream PC-error message "applephotostreams.exe has stopped working" and now additional photos that I want to upload is not uploading.

I sync my devices with a PC running windows. I have turned on Photo Stream on my PC, iPhone4S & iPad2.
On my PC it creates two default folders in Pictures called "My Photo Stream" and "Upload".
Instructions says that you can add photos to the "Upload" folder and it will automatically upload to your "My Photo Stream" folder and when your devices are connected to wi-fi they will upload to each device and show up in the "Photo Stream" section of Photos.
I was able to upload 50 photos but then I got an error message that applephotostreams.exe has stopped working.
How do I fix?

I was having the same problem. Earlier in the week, I was able to drag a few photos to the upload folder and they synced correctly. Yesteday, I dragged different photos, and I got the "applephotostream.exe has stopped working" error.
The solution - for me, at least! - was to reduce the size of the pictures being uploaded to the photostream. While all of the pictures were jpegs, the first set were ca. 800K (3800 x 2500), and the second set were ca. 2.5 MB (4000 x 2000). When I reduced the resolution of the last set by a factor of 4 (ca. 600 K, 2000 x 1500), they uploaded without a hitch.
Based on this admittedly sketchy experiment, it looks like Apple has a max picture size limit, apparently based on file size rather than picture resolution). Perhaps < 1 MB? To be rigorous, I should complete the experiment - leave the resolution of the second set of pictures alone and reduce file size by reducing jpeg quality.
Has anyone heard about a picture file size limit?

Rim.desktop.autodate.exe has stopped working

Similar Messages

Maybe you are looking for