RIM LOGO NOT APPEARING WITH FACEBOOK MESSAGES

please help, RIM logo is not being appeared while posting messages on facebook
regards.
Idrees

Okay. Please go to Facebook on your computer, login, then go to Account Settings. under Account Settings, click Security on the left panel then look for Recognized Devices if you're setup for it.
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Similar Messages

Rim logo not appearing with my facebook messages

please help, while posting facebook messages its not showing the RIM logo.
regards.
Idrees

If you view the post via a PC, what does it state under the post... as in "via web" or what?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome the b

when I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome this.

Delete abd re-enter your Facebook account information jnder the accounts tab in the iPhoto preferences
You may also want to take a look at the user tip for Facebook problems
LN

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When I try to open I Movie the screen appears with the message creating thumbnails and all my projects have disappeared. Then everything freezes and I have to force close my Macbook Pro

When I try to open I Movie thes screen appears with the message "creating thumbnails" and then freezes. None of my events or projects appear in the libraries. I cannot close I Movie or my computer and have to force shut down my Macbook. This is a sudden occurence.

You can never, never transfer an installed copy of PSE. It's just too complex and it strews stuff all over your hard drive in places the migration assistant is not programmed to look. Now you will need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
after which you can go around and manually remove all the bits from Applications, the library at the top level of your hard drive>application support>adobe, and your username>library>preferences. Spotlight will not help with this; it's programmed to skip these kinds of files.
Then you can reinstall from scratch. Let us know if you need help finding the library folders.

HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running". Windows 7.

After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

SMS messages do not appear in the Messages list, although the BlackBerry smartphone indicates that SMS messages have been received

The BlackBerry smartphone shows notification that a SMS message has been received, but the SMS message does not appear in the Messages list or the SMS and MMS list

Hi!
Do you have an icon for SMS and MMS messages?
To find the messages in the mean time from the main message queue do a search:
Options>search setup up the options as follows it will show all unopened messages.
Service=ALL SERVICES
folder: ALL FOLDERS
show: ONLY UNREAD
type=ALL
Thanks,
Bifocals
Here is the icon I'm referring to:
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Why does cloud logo not appear next to some songs in my iTunes library? Does it not save them for some reason?

Why does cloud logo not appear next to some songs in my iTunes library? Does it not save them for some reason?

Hello!
The cloud logo means that you purchased these songs from the iTunes Store but haven't downloaded them to your computer yet. If you want, click the clouds to download the songs and the cloud logo's will disappear for those songs too.

On certain sites, some lines have the lower half missing. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

On some sites certain lines appear with the bottom half missing, as if obliterated. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

I looks that the whole line doesn't fit in the container, so the bottom part is cut off. The usual cause is that a font is used that takes more vertical space, so any increase or changes from the font in what the website prescribes can cause this issue. I've seen web pages that were even affected by changing the minimum font size from none to 1 (!). If you do not have the font installed that the website specifies then Firefox will fallback to another (default) font that may have different dimensions.

Droid incredible not syncing with Facebook

I just purchased a Droid Incredible 3 days ago. It will not sync with Facebook. I can download the app and go there but I cannot update contacts. I have gone into the menu settings and apps and it is not listed. WHen I install it I get an error that says the service is not available. I have done a factory reset and spoke with Tech support. He told me that I was out of luck and that I would need to purchase a new phone to know for sure if it is a FB issue or a phone issue. I am not going to pay another 300 dollars to find out. Does anyone have any ideas?

Delete the app and redownload. Also, go into Facebook settings and turn on notifications.
Also from the phones main Screen. MENU>SETTINGS> ACCOUNTS & SYNC, make sure Facebook is marked for syncing.

HP Logo Not appearing issue

Hello,
I have HP 15-f018ca Energy Star.
It came with Windows 8.1 but i did not liked it so i clean installed Windows 7 Home Premium 64 Bit.
After installing this i'm having this issue.
HP Logo at the start up it is not appearing. Is there anyway i can fix this?
Tried Loading default BIOS but then i can not load into windows-7.
Thanks

Hi there @jateen89,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you downgraded your system to Windows 7 from the factory installed Windows 8.1, and now the notebook is not starting properly.
After some quick checking, I found that the only supported operating system for this notebook model is Windows 8.1, which means that there are not any drivers specifically customized for this system for running under Windows 7.
Did you make a set of recovery disks, prior to doing your downgrade?
Also, are the original recovery partitions still intact? If so, you can always do a System Recovery back to the factory installation.
Performing an HP System Recovery (Windows 8)
Troubleshooting HP System Recovery Problems (Windows 8)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Edit as new not working with draft messages?

Occasionally I want to send two similar messages at the same time. I write one message and save it as a draft - usually at this stage without any addresses specified.
I visit the Drafts folder and use Edit as New to open the draft message as what I expect to be a new message, and then make the changes necessary (including a modified subject) to create the second similar message. I then save the second message as a draft.
When I return to the Drafts folder, the second message has overwritten the first. Edit as New does not appear to work correctly in the Drafts folder ......
I can create two similar drafts by starting a completely new message (with Write), and then manually copying the subject & contents of the original draft. However this is a cumbersome process .....
Please can Mozilla be modified so that Edit as New allows multiple draft messages to be created correctly?

Thanks for your feedback. I've looked at the bug report you identified and added my vote to the system.
I have previously tried using Templates for this issue. However, my messages are usually sent to a mailing list. I have found in the past that the mailing list is expanded when the message is sent, and my templates contained the expanded list (which meant that any addresses subsequently added to the mailing list were ignored).
I don't think I've actually tried creating the template without any addresses, even though this is how I currently work with my drafts. I'll do some more experimenting - it might provide a neat solution to several related problems.
Thanks again for your help.

Problem while sending mail -Logo not appearing.

Hi,
The requirement is to send a message as a text and not as a PDF attachment to a recepient.
( I am converting the smartform code into HTML format - I referred to url
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp which contains the rough code ) and am sending the mail to the
recepient.
The mail is getting generated, the text of the message is getting properly formatted as desired.
But the company logo is not appearing .
I am able to see the logo when I send the mail to my employer's mail server outlook, but am unable to see
the logo when I send the mail to the customer's mail server in outlook.
Can anybody suggest what could be going wrong?
Regards,
Girish.

Hi Brad John,
Thank you for your reply.
I tried 2 methods :
1. I attached the logo to the smartform and sent the mail to my employer's mail id and
my customer's mail id.
I am able to get the logo and text in my employer's mail server but in my customer's mail server,
the text and logo are getting split into 2 attachments in the body of the mail
instead I require the text and logo in the body of the mail.
2. I removed the logo in the smartform and tried typing the url in the smartform window text as suggested in
    URL http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/2273. [original link is broken] [original link is broken] [original link is broken]
   The logo does not appear iin my employer's mail server but in my customer's mail server,
   all I get is a text of the URL.
Can you please suggest the possible reason for this problem
The url of the IMG tag is accessible externall.
What is meant by drop/reference MIME data in a location that is external to corporate firewall.
Please elaborate.
Many thanks for your time and patience.
Regards,
Girish.

Thumbnails do not appear with XI

All the new pdf's that I have created from my Canon DR-M160 scanner do not have thumbnails using XI
The pdf's had thumbnails when using X.
I am probably explaining this poorly.
But I got thumbnails from scanned documents yesterday under X.
Today, after installing XI I don't get thumbnails, only icons.

Update.
I tried printing from a Word docx to create a pdf.
Strangly, Adobe did not appear as a printer selection.
Very strange because it was there before I upgraded to XI.
I don't know what really happened, but I was dragging and dropping .docx files and .xlsx files onto the Adobe icon on my desktop.
I got an error message.
BUT eventually Windows popped up with a dialogue box that looked like it was installing something related to a printer.
Then in .docx and .xlsx Adobe APPEARED as a printer option.
I then printed docx and xlsx files and the thumbnails appeared VERY NICELY.
So, I scanned a document and the thumbnail appeared very nicely as well.
That is the best I know how to explain it.
Final resuls is satisfactory.
I get pdf thumbnails from scanned documents and from docx and xlsx documents printed to the Adobe printer.

Cursor does not appear on Facebook page load. Spacebar shifts page down.

Cursor does not appear anywhere on Facebook page load. It used to land in the first text box, and as I was used to this I would open an FB page and start typing. Nothing was entered into the text box, and when I hit Spacebar it shifts the page down.
Couple of things:
It acts this way both in normal and in "safe mode".
It acts correctly on Google - it is my home page and when I open it the cursor is always in the search box. It also acts correctly on YouTube.
The cursor DOES NOT appear in the URL bar (thankfully)
The cursor DOES NOT appear in any text boxes on any other pages I open >> The Weather Channel, TED.com, Amazon.com
The Spacebar scrolls the screen down one frame at a time.
It has the same behavior with the "Always use the cursor keys to navigate within pages
I am using FF 18.0.1 on Windows XP
I have tried a lot of the weird tips and tricks suggested on this support forum, but none of them address specifically this issue.
Thanks in advance.

If I'm not logged on then the cursor is in the login form at the top.<br />
Once logged in the main body has focus and not a specific element, so you have to click in an input filed to set focus to it.
If it worked before then they have changed the code of that page recently and it is just a coincidence that it happened around the time that Firefox updated.

RIM LOGO NOT APPEARING WITH FACEBOOK MESSAGES

Similar Messages

Maybe you are looking for