Ring Control Output is the Item name and not the value

Hello. I am new to Labview. I am experimenting with labview and just creating simple VI's to learn about the software. I have placed a ring control and attached an indicator to that ring control. I thought that the purpose of a ring control was to select an item and output a value. For example, I have placed 3 items in the ring properties (Red, Blue, Yellow) and given those items values of 1,2,3. But when I run the VI and select Blue, I was expecting the indicator attached to the control to read 2 but instead it says 'Blue' (same for other items as well). What am I misunderstanding here or doing incorrectly? I have also attached a screenshot.
Solved!
Go to Solution.
Attachments:
Untitled.jpg ‏249 KB

Your indicator is another ring that has the same name value pairs, so it is going to display the name associated with the value. Delete the ring indicator and just drop in a regular numeric indicator. Then it will show you the value.

Similar Messages

Delivery address at Item Level and not at the Header Level

Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

It is standard process only.
In Po delivery address is maintained at item level because to which address perticular material to be delivered,
this may change from material to material or may not change

How to get my images always order by file name, and not by time of captur, in all the folders in the library?

How to get my images always order by arquive name, and not by time of captur, in all the folders in the library?
Sorry for the poor english, but im portugues.
In the library we can change the order of classification of image by, time of capture, name of file etc... I'm wondering if its possible define to be always by the name of file.
It ´s possible?
And i have other question, in print label we have an option to auto rotate to feet in page to have the image using the maximum area in the page (auto rotate, zoom etc), its possible to change the orientation of the rotation to be always in the other direction?

The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

Recently I noticed that when I change the name of a photo (correcting a mistake) it always goes back to the previous name, keeping the mistake I'm trying to correct. A spelling mistake, for example. As I keep my photos organized by name and not by date, t

Recently I noticed that when I change the name of a photo (correcting a mistake) it always goes back to the previous name, keeping the mistake I'm trying to correct. A spelling mistake, for example. As I keep my photos organized by name and not by date, this is very annoying.
And today it won't even read my camera's sd card, and I try with 2 different ones. If I restart the computer, leaving the memory card in, then it reads it; but if I pull it out and push it back in it doesn't see it. Whath am I doing wrong, if anything?
Diane

Where/how are you trying to change the name? If it is in Finder (after you've downloaded the pics to your desktop), highlight the pic icon and press Return. the name field will change and you can type in your new name. Hit Return again. That should make it "stick". If you're trying to do it elsewhere, please post the steps that you've tried.
As for your card: do you eject it properly? Either drag icon to trash or hit the eject symbol in the sidebar?

HT5622 I just upgraded to a new MacBook and my wife is inheriting my old MacBook Air. How can I change the her MacBook Air to now be fundamentally hers? That is, so the House Icon under Users folder is her name and not mine? Also the default AppleID for p

I just upgraded to a new MacBook and my wife is inheriting my old MacBook Air. How can I change the her MacBook Air to now be fundamentally hers? That is, so the House Icon under Users folder is her name and not mine? Also the default AppleID for purchase stubbernly remains my own.

You do not mention it, but I will assume you are running OS 10.9.1.
Go to: Apple menu / System Preferences / Users & Groups. Click the padlock and enter your password.
Click the + (plus sign) and set up a new account for your wife. You have to enter a bunch of info. And then create the correct Login Options. Automatic login does not require a password from the selected user.
When that is done, verify the account works by restarting the computer and login as your wife.
Make sure that any applications in your own Users folder that will be needed are moved to the Applications folder in your wife's Users folder.
Now go back to Users and Groups, click the padlock and authenticate, select your own account, and hit the - (minus sign). This step cannot be reversed, so you might want to wait a few days before doing it.
When your wife is logged in, the App Store will know.

How do I get the List REST method to return the results with the display name and not the internal name. I also need the hyperlink to the attached document.

FileSystemObjectType: 0
Id: 2
ContentTypeId: "0x010100517BCCBD1C63034A8C1141184DAB12C5"
Title: null
OData__dlc_DocId: null
OData__dlc_DocIdUrl: null
zopv: "Paint Specification"
s2ue: "J"
We'd prefer to make a single call. It's too bad the REST Api doesn't return the data in the same format as the WCF service, which uses the Display Name and not Internal Name. It also includes the hyperlink to the document.

Hi,
You can get the display name of fields with typedisplayname property.For more information,you can refer to the article:
http://msdn.microsoft.com/en-us/library/office/dn600182(v=office.15).aspx#bk_Field
Best Regards,
Eric
Eric Tao
TechNet Community Support

Item '(item name)' could not be moved message

I get the message "The item '(item name)' could not be moved because '(folder)' cannot be modified." when trying to copy files from my iBook to my iMac over the network. This includes Home, Desktop, and other folders. The odd thing is this has worked fine in the past. I checked and File Sharing is enabled on both computers.
However, I can copy files to/from my iBook when on my iMac with no problems.

On the iMac, select the folder you're trying to move the items to and choose Get Info from the File menu. Under Ownership & Permissions, verify that your account has Read & Write access to them, and that they are unlocked. Repeat this process with each folder.
(11725)

Compact Fieldpoint Item Names were not downloaded

Hola buen día,
Tengo un equipo Compact Fieldpoint que recientemente formatee, ahora que estoy intentando programarlo nuevamente le estoy cargando un archivo de configuracion *.iak Al abrir este archivo me detecta la configuración si problemas pero al guardar la configuración y tratar de descargarla al controlador me aparece el error:
Your Configuration File Has been saved. However, Items names were not downloaded to the following cFP-xxxx : CARACOL
Quisisera saber si hay alguna causa que origine este error que me impide configurar mi equipo.
Por otra parte cuando abro el equipo desde el MAX (Measurement and Automation) no se despliega la capacidad de memoria usada y disponible del equipo (adjunto imagen).
Saludos y ojalá puedan ayudarme a solucionarlo
Adjuntos:
error_fieldpoint.jpg ‏13 KB
Error_Memoria_Fieldpoint.jpg ‏42 KB

Hola lenin_7.
Podría deberse a un problema cuando se instaló el software o se formateó el controlador. El warning que te aparece dice que no pudo cargar las configuraciones del .iak a algunos de los archivos .ini en el Compact FieldPoint.
Pudieras revisar el archivo fpbank.ini en la carpeta de ni-rt/startup del Fieldpoint? Para acceder al ftp tienes que escribir ftp://<ip del cfp> en la barra del explorador de Windows.
Ese archivo debe tener algunos nombres escritos, y si los borras manualmente y vuelves a descargar el iak file se deben volver a escribir.
También me podrías decir si ya intentaste volver a formatear e instalarle el software al Compact Fieldpoint?
Saludos!
Aldo H
Ingenieria de Aplicaciones

Camera Roll - ordered by "Name" and not by "Date".

My Camera Roll had a problem yesterday and forced itself to be rebuilt. When it came back up I thought a bunch of new images and videos were deleted. I connected my iPhone 4 to Image Capture and found that all the images and videos are still on my phone. However, Camera Roll is now sorting by "Name" and not by "Date" -- Note: These are the columns that are listed in Image Capture.
Does anyone know how to get the Camera Roll to display images by "Date" again? Thanks for the help!

Odd yeah, from what I can see there is no way to specify the sort order on the iPhone. Is is possible that the date data became corrupted? Can you grab a screenshot from your computer showing the name / date columns?
Slightly off topic, but possibly a similar effect to what has happened in this case:
I know when you transfer files from one hard drive to another, and then try to sort by the "Date Added" attribute, the Date Added becomes the same for all files- the date they were copied to the second hard drive.

How do remap drive names and not lose project clip links to Event names...?

how do remap drive names and not lose project clip links to Event names...?

You will need an extra external drive. All moves must be done within iMovie to preserve your links to the projects.
First Move (command-drag) the event to the extra drive. Make sure the project still works.
Then rename, reformat, or repartition your drive as needed. Then, if you want, move the Event back to the newly named drive, again via Command-Drag within iMovie.

Delivery address appearing at Item level and not at Header level in PO

Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

HI Paul,
Thank you for your response.In our case even if all the Line/items level have same Plant and storage location still the delivery address is getting printed at Item level and not at Header Level and this is happening only for PO's created from PR's orginating from SRM7.0.
However if we create PR's directly in R/3 and then convert them into PO's,the delivery address is getting printed at the Header level if the delivery address is same for all the Item level.
Can you plz some insite into this?
Your help will be highly appreciated.
Regards,
RKS

Delivery address at Item level and not at Header level in PO

Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated,
Regards,
RKS

This may be an old note, but it may point you in the right direction: Note 450425 - Delivery Address creates individual R/3 address number.
If you debug the function module in SRM that creates the PO in ECC, you can check if this is the case.
Regards,
Robin

How to organize contacts basing on name and not on surname

Please, help me to reorganize my Contacts in alphabet order using NAMES and NOT SURNAMES...thank you!

You don't tell us what OS you are using. This is how you do it in Snow Leopard:

Fetching master item name and its description in oracle apps .

Hi all,
I have to fetch master item name,its description,ordered item name,its description for a sales order .
Do any one know the table names and link or Query.
Please help.

I assume ordered_item_description is same as item description (in 11i)
Yes - there could be a relationship between customer item and your inventory item.
You can set it up by going to Inventory > Items > Customer Items > Customer Item Cross References
Hope this helps,
Sandeep Gandhi
Edited by: Sandeep Gandhi, Independent Consultant on Dec 8, 2011 9:39 AM

How to find output type givenSapscript form name and print program name

Hi Experts,
Can anyone tell me how to find the output type of a sapscript form if the print program name and sapscript form name is
known.

Hi,
There are two ways:
1. Use table TNAPR .. Here is table give PGNAM as your print program name and FONAM as form name.. Now the field KSCHL will be the output type assigned to your script.
2. You can also check the NACE t-code.. In that select a application(Corresponds to your area) -> click on Output types tab -> Here you get list of output type.. You need click on Processing Routine folder to get all other info..

Ring Control Output is the Item name and not the value

Similar Messages

Maybe you are looking for