Ring sound setting

Hello, I keep setting my ringtone sound level at maximum and it keeps reseting to the middle all the time. The high level is very important for my work. Any solutions or news??? Help much appreciated

Thank you all. Problem solved:
1) set ring tone volume to max
2) Play an Ipod song and set the volume to max.
3) Used it for 1 day, opened/closed, made calls did everything ring tone volume stays at max.
Thank you
Dimitri

Similar Messages

  • How to set my songs to ringer sounds

    How can I set one of my iTunes to a ringer sound in iPhone 5 s

    You must create a ringtone.
    Google will find several ways to do this.

  • No ring sound volume on incoming call, no speakerphone

    My Xperia Z3 Compact is about 6 weeks old (US-unlocked) and recently the phone quit ringing audibly when I have an incoming call. When I get a call, the screen comes on and shows that I have a call, the phone vibrates like it always does and the LED flashes bright white. But no sound, no ringtone. Actually - a very quiet ringtone but through the small phone receiver speaker (where you listen to a caller with phone to your ear). All other notifications and stuff sound out normally: SMS, email, alarms, startup sound, music all work fine. Only incoming calls have no ring volume. I have checked the volume settings and have the ringtone & notifications volume slider wide open. I have changed ringtones, adjusted every sound and volume setting on the phone to no effect.
    I did a hard reset and that did not solve the problem. After hard reset I let the phone update as necessay (the phone was up to date, many Sony apps updated). I did not re-install my data and called my phone a few times after the hard reset, still no ring sound on incoming call.
    I did another hard reset and did not let anything update, still no ring sound on incoming call.
    Related to this is the fact that on any phone call, the speakerphone does not work. If I turn on speakerphone, the caller can hear me but I cannot hear them. If I turn off speakerphone, everything is fine (I hear the caller in the earpiece, they hear me). The external speakers do work fine, I can play music, video, etc. and it all sounds fine. I have tried all of the different ringtones and they sound fine except for when someone is calling in and I hear nothing.
    As an aside, this phone has not been dropped or wet or any of those things that might have created a problem.
    Any ideas?

    You could repair your phone with PCC
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

    I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

    Hello Mogulman46,
    So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off. 
    Use Do Not Disturb on your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5463
    Regards,
    -Norm G. 

  • My click sounds and ringer sounds on my iphone4 just stopped working....what can i do to fix it?

    my click sounds and ringer sounds on my iphone4 just stopped working....what can i do to fix it?

    Is the mute button on the side of the phone switched on?
    Also go to settings, scroll to the bottom and ensure that "Keyboard Clicks" is set to on. Make sure that the "Ringer and Alerts" volume is not set at zero in this menu.

  • Ho do I make a sound setting?

    How to I create a sound setting on my Iphone 6 so that there is no noise if an email comes in ... but there is a ring if a phone call comes in?
    Thanks

    Modify it from settings like so
    settings - sounds - new mail -  alert tone - none

  • IPad Air - no ringer sounds after ios 8.3 update

    since updating to ios 8.3, my iPad Air has no notification or ringer sounds on apps. eg I'm unable to use the Alarmed app as there's no sound. The volume works ok on music and movies.
    For 2 days after the update, the home screen showed the Ringer icon flashing On and Off on the home screen when I woke the iPad up. (it's stopped this although the fault remains).
    I have held the home and power button and rebooted, but this doesn't solve the issue.
    Any suggestions please?
    I only updated from iOS 7 recently as was trying to avoid the dreaded update bugs....iOS 7 crashed. So does 8.3.

    I'm not 100% sure that I know what you mean by "reset/restore."  If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • How do you switch output sounds   set to my external monitor that is connected via HDMI.

    How do you switch output sounds   set to my external monitor that is connected via HDMI. 

    Hello gail from Ajijic,
    If you'd like to change the audio output of your Mac, you can do so by accessing the Sound preferences in your System Preferences.
    Before you start, open the Output pane of Sound preferences (choose Apple menu > System Preferences, click Sound, then click Output).
    Choose a sound output device
    From the list of sound output devices, select the one you want to use. All sound output devices available to your Mac are listed, including the computer’s internal speakers, devices plugged into your computer’s sound port (), USB speakers, and AirPlay devices.
    For any device plugged into the computer’s sound port, choose Headphones.
    OS X Yosemite: Adjust your computer’s sound output settings
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." Please help it's urgent!

    How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." I need to do this in order for Rosetta Stone to recognize my USB Logitech headset. I'm extremely confused. Please, just help.

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
    You can also post in your installed os section of the message board.

  • High pitch ringing sound when i plug my headphones in.

    Hi
    I am currently using a Macbook Pro 15" retina display
    There has been no problems previously. Out of no where, today my headphones has this high pitched ringing sound whenever i plug it in.
    The audio is fine when I do not use any headphones. but when i plug them in, there is a ringing sound. This is happens as well when i plug in other headphones I have.
    I have tried going to Sound under System Preferences and adjusting the stuff there but nothing seems to work.
    This ringing sound makes listening to anything unbearable.
    Please help

    There is a micro switch inside the socket to switch between the optical output (digtal), headphones and internal speakers. It sometimes gets stuck.
    Push the headphone plug into the socket numereous times and see if it frees the switch. Please do not push other foreigh objects into the socket as you may break the switch and/or the electrical contacts.

  • Main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

    main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

    I spoke to the reseller today and they aggred to exchanged it. They didn't elaborate on the actual cause but thought that it had to be a hardware issue.
    It could either be the issue that Euvix suggested or it could be as simple as the outer speaker is simply not working.
    Anesi, did you use the phone before the upgrade? Looking at what you've written I take you didn't so I would go back and get it exchanged.

  • Flash sound setting for internet publishing

    Dear Friends,
    iam creating elearning lessons and trying to upload in internet. Please advice me what sound setting should i keep. Now iam keeping in publish setting, 24kbps. with "convert stereo to mono". But iam getting disturbance in the swf output. The mp3 sound iam inserting is very clear (format is 16bit, stereo, 44100hz). But iam getting disturbance in output.
    Pls advice me what is the correct sound setting for web based swf lessons.
    Thanks in advance,
    Syed

    Dear Mr.kglad,
    Thanks for the reply. Native settings means, my mp3 vo is 16 bit, stereo, 44100hz for this what should i keep in publish settings? pls advice me. for ur info, this 16bit stereo, i have made, actually they recorded as 16bit, mono. Now iam importing as stereo.
    my issue is same as http://www.newgrounds.com/portal/view/553963 this pls check this link. This is not my lesson. while browcing i foudn this. this same as my problem. when i listen in fla file its good.. after press control enter and made as swf iam geting the distubance and bad quality in vo.
    thanks and regards,
    syed

  • Changing in dial "in ear" ring sound

    HI we have CME and I was wondering if there was a way to change the sound that customers hear when they in dial? Currently it is a long ring with a pause and another long ring. Traditionally in Australia the in handset ringing sound is short and repetative?
    Cheers
    Barry

    Hi Barry,
    You can change this by changing the Network Locale. Network locales specify country-specific tones and cadences.In Cisco Unified CME 4.0 and later versions, you can install the files to support a particular user and network locale. That being said, I'm not sure what Locale would match the "Ringback Tone" you need as ther is no specific one for Ausralia :( You may have to experiment with this a bit.
    http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00807d5536.html#wp1101867
    Hope this helps!
    Rob

  • Skype ring sound comes from earpiece

    Hi everyone,
    On my Nexus 5, when the phone is locked, skype ringing sound comes through the earpiece instead of the loud speaker. Most of the times I am missing calls because of this. Any solution for this?
    Skype Version: 5.0.0.52727

    Hi, I had the same problem and now i fixed it.
    I am using Sony M2 aqua with sony smartwatch that means my bluetooth is always on. You should change the mood of Bluetooth from your skype. When you are calling someone from skype (when it is ringing), Bluetooth icon will appear right beside of camera and mic icons. Then you should tap it and change the icon to out load mood icon. It will work out again and you can hear call from speaker on the bottom. I crosschecked with receive and dealing calls while Bluetooth was off, it was working too.

  • Lost ring sound and cant play songs

    i lost my ring sound and i have no sound when i try to play down loaded songs help !curve 8500

    No you cannot accomplish what you want unless you
    manually manage your tracks. If you on auto sync,
    there would be no reason to have to select tracks.
    Yes there is a need. If I bring my IPOD to work, and want to play some music, i need to select the track on my ipod as this is where the music is.
    My Library at work has no music on it.

Maybe you are looking for