Ring tones dont show up on my i phone

I just got an i phone this last week and when i try to get some of my ring tones on it to use them i tunes wont let me load them. i am using the same account on my computer and phone and it is sinced together. but it wont let me put new ring tones on my phone or in my ring tone library? any help or suggestions would be appriciated

natesmustang wrote:
I just got an i phone this last week and when i try to get some of my ring tones on it to use them i tunes wont let me load them. i am using the same account on my computer and phone and it is sinced together. but it wont let me put new ring tones on my phone or in my ring tone library? any help or suggestions would be appriciated
Ringtones
http://bit.ly/hFj8SA
or
http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/
or Video
http://cnettv.cnet.com/create-free-ringtones-itunes-10/9742-1_53-50093086.htm

Similar Messages

  • TS1538 Hi my ring tones have been sent on my I phone it sent my music but no tones why

    My ring tones have not gone to my new phone buty music as why

    This covers all the process
    Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support

  • When I down loaded some ring tones they show up in my Music folder but not in my ringtones?

    When I down load some ring tones I purchased they show up under my Music Icon but not in my ringtones

    Where did you download them from? Did you drag them from the Music folder to the Ringtones folder?
    iOS devices use MPEG4 audio (AAC) for ringtones. Often these files end with .m4a, but the .m4r suffixe is generally used to denote a ringtone. iOS expects a ringtone to be less than 30 seconds in length and otherwise the only other restriction is that it's an AAC audio file.
    You can make your own ringtones simply enough with any audio editing application on the Mac. Just create an MPEG4 audio stream, give it the suffice .m4r, and drag it into iTunes.

  • HT204053 purchused ring tones not showing on icloud

    I just got the iphone 5. Signed in and half of my purchused stuff is not showing up in icloud.  On my iphone 4 I had to swap it out a few months after I got it back in 2010. When I did that for some reason on the phone it created two seperate sets of playlist that read Purchused on Erika's iphone. Well with my new phone now it seems as if I only got the stuff that was listed under one of those playlist.  I had brought my iphone4 in before to the genius bar because of that and they really couldnt tell me why it did that. And I was abel to stop it from doing that but everything before that was already split. Hope Im making sense here. I have the receipts of the stuff I purchused that is not showing in my icloud. What do I do to get access to that stuff I already bought?

    I have used 10 or so custom ringtones in the past. They are still in the devices pane on iTunes. I assigned different ones to different callers for ID's. Now only 1 ringtone at a time will show on my iPhone 3GS 32GB. I manage all my media manually; checking the "sync" box on any panel warns you that all of of your music, movies, TV show etc. will be removed if you check this box. Not pretty.
    I can manually drag any compatible media to the iPhone device icon EXCEPT ringtones. I used to do this without a hiccup. Nobody knows what's going on?
    Thanks for any help; I've basically given up.
    Don

  • Basic Ring Tones on iPhone are Very Poor

    As a business professional I am very pleased to pull out my iPhone and show it to other business associates. However, I am extremly dissapointed in the childish assortment of ridiculous ring tone options that are offered on this phone. I understand that a ringtone program was just released yesterday allowing you to create ring tones from iTunes music files.
    I don't want my phone playing songs as ring tones while I am trying to conduct a professional business meeting. When will Apple PLEASE allow us to have simple digital phone style ring tones for use on this very fine business tool. I will gladly pay for these ringtones but please remember not all of us want songs for ring tones!!!
    Listen to the phones in your offices or check out the ring tone from the phones on the TV show 24. We just want a clean digital sound option for the iPhone.
    HELP PLEASE,

    ...and your question for the support forum is what?
    If you have a comment for Apple about the iPhone, leave it here:
    http://www.apple.com/feedback/iphone.html

  • Ring tones on 3.1

    I have just updated to I tunes 9 and v3.1 on my 3GS. All the ringtones i had created using ringtone maker have been deleted from my phone and I cant get them back on. The ring tones still show and play on I Tunes but when i try to drag and drop them onto my phone i get the + icon but the ringtones wont move or sync onto the 3GS. Can anyone help ?
    Thanks
    Rob

    The same to me. So it seems to be a general issue. Hoping Apple will take care of this problem.
    Claudio

  • Ring tones Apps!

    I've just bought an Iphone 5 - my first smartfone so all a bit new to me. I've downloaded an ring tone app from Itunes and sync my phone. The App shows up on the phone but I can't add the ring tones to the 'General' 'Sounds' area to select and link to a ringtone such as incoming text. All I see is standard options.
    ANy one assist?
    Cheers

    No app is required.
    A simple google search would reveal how to created ringtones for an iPhone.
    For help with the specific app, ask the app developer.

  • After updating to ios5 my previously purchased ring tones don't work.

    After updating to ios 5 my ring tones show only the default ones on my phone. 
    In Itunes it shows up, I have synced a number of times but the ring tone never shows up on the phone. 

    I couldn't get it to start at first. Then I found a forum that hade other issues with plugin and firefox 4 where the solution was to start firefox 4 in 32 bit mode and not in 64bit mode. After that it works nice for me.
    It might also be useful to change the setting for the time that scripts are allowed to run.
    dom.max_script_run_time should be set to higher number than 80 according to the support.
    Good luck!

  • HT1386 I have a purchased ringtone that shows in my library as being on my phone.  However, when I try to set the ringtone as default or to a contact, I cannot find the tone.  I have sync'd the phone several times and tried dragging to the phone

    I Have a purchased ring tone that shows in my library.  I tried to set the tone as a default and also to a contact, without luck.
    the tone shows as being on my phone but, I cannot locate it or assign to default or a contact.
    any ideas?

    Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
    As IO said before:
    You can redownload most iTunes pruchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    I do not think it included audio books.

  • Cant get my ring tone on my phone

    i got the 5s a few days ago i just synced in today and lost my ring tone. it shows up on the computer but not on  my phone. it asks me to buy it again

    Connect and select iPhone to iTunes > in Tones tab, select your ringtone and do a sync.

  • Since I have installed iOS 6.1.3 on my iPhone 5 I have sometimes problems to start a phone call. Everything looks fine, but no ring tone... A workaround is to stop phone app in the multitasking bar. But this is more than inconvenient ;-) Any solution?

    In this cases everything looks fine, but no ring tone is there and after sometimes the phone informs me that no connection can be estabilished (its a German phone, therefore I am not sure about the message in English systems). A workaround is to stop the telephone app in the multitasking bar (double click on home button, hold the app symbol pressed for some seconds, close app). Next several call work after this.
    I am not sure if an incomming call would work in this mode...
    Faces anybody the same problems or has solution for it?

    Basic troubleshooting
    Restart
    Reset
    Restore with backup
    restore as new if required

  • I want know how to use the ring tones I made on my i-phone

    I have a ring tone app. I used it to create some 15 second ring tones from the songs on my i-phone (3Gs). I emailed the ring tones from the app to my email account and then I added them onto my i-tunes in the ringtone section. I can not figure out how to take the ringtone and make it work on my phone. I've synced my phone and I don't see them being added. Can someone give me the steps to take after I have the ring tones saved to my library in i-Tunes? Thank you!
    Lisa

    You have to make the changes you want in the folders on your computer, then sync your new choices via iTunes.  iPhone, iPad and iPod touch: Syncing photos via iTunes, http://support.apple.com/kb/HT4236

  • Stop Playing Ring tone

    Dear All,
    I am playing a ring tone on a certain time to some phones, can the phone stop this ring tone if he needs.
    i am using "play:myringtone.raw" in the execute object. so can i add a softkey on the ipphone so the ipphone user can stop this ringtone??
    Thanks alot,
    Marwa

    Thanks alot for your help,it's a good idea, I'll try it and tell you the result.
    i have another question, if i need to stream this audio file not playing it as a ring tone, i tried to use the AvTransmit2.java class you sent before, and run this class on the streaming server, and on the phone i pushed the following:
    Phone.push("RTPRx:10.30.0.52:20480","10.30.0.52","2005","12345",true);
    so it can start receiving the stream but i received:
    i don't know why, could you plz help me in this.
    Thanks alot,
    Marwa

  • HT201269 I downloaded the iOS7, lost all the custom ring tones that I had on my phone, how do i get them back.  when I sync my phone, itunes says that they have been selected, but they don't show up on my phone

    I downloaded the iOS7, lost all the custom ring tones that I had on my phone.  the iTunes sync page says that they have all been selected but they don't show up in my phone? Help?

    I had the same problem and was able to fix it. Go to your iTunes and click on the Tones folder on the left under library. Some of my ring tones had an exclamation mark next to it and those were the ones that did not sync. You have to click on those and find it in your computer. Once the exclamation mark is gone, go to Tones section of your device in iTunes, make sure you select the tones you want synced, and click apply. I hope that helps you!

  • ITunes 7.4.1 (2)...Not showing and Ring Tone Icons for An Songs...

    I have recently upgraded to the newest version of iTunes. However, of the 1,000+ songs I have,
    the ring tone icon is not showing up at all to create any ring tones for my iPhone. If you have any suggestions please let me know.
    Thanks!

    So after my last response, I have now managed to get the Ring tone identifier bar showing possible ring tone songs to show up in iTunes. However, none of my 1,000 + songs have an icon to allow me to make a ring tone.
    Any ideas...

Maybe you are looking for

  • How do I route system sounds to USB audio?

    I own An M-Track USB audio interface.  Music, Videos, and Applications in general all route audio to this device properly.  In sound settings, both Input and Output are set to the M-Track.  The problem is that system sounds specifically still route t

  • Ipod touch 3g external speaker

    I have a 3rd gen ipod touch, and out of no where the external speaker stopped working. I've restarted it several times, made sure the volume limit was off, and tried with sound check on an off. It works fine with headphones in though. Also i'm really

  • Connect to Server using TOAD

    I am a newb to the DBA side of Oracle and have never setup an instance of it or installed it for that matter. I have TOAD and I would like to connect to the server using it. I have installed TOAD 7.6 on my workstation and that is all. I have not inst

  • ACS 5 Limited user account

    Hi, i have cisco ACS 5.2 and want to create user account for technician, with only certain commands. how can i achieve this ? thanks                  

  • Having trouble with outgoing email settings

    I'm sure this has been asked a million times but am having trouble setting up again following a hard reset, shame the PC suite backup doesn't save these settings but that's another story.. What I have is, other than my personal details for my account