Ring tones for certain people

How do I set certain ring tones for specific contacts???
Many thanks

Hi Napfla745,
Try going into Options > Sounds&Ringtones > Sounds for Contacts from there you can add contact alerts.
sent using my fingers :0

Similar Messages

Set up ring tones for family won't work

Anyone have this problem??? I set up different ring tones for my 'family' - I was told I did set it up right, but for some reason it just does the default ring when those people call. (Default for me in the 'old phone' ring).... I called Apple and phone was 'reset' etc., they will call again today :-( I love my iPhone and do miss my old ring tone i had for them.
Any help thanks!

Thanks. I did see that troubleshooting guide and went through most, if not all, of the steps.
I neglected to mention in my original post that my home computer is a Mac. When I set up the iPad on the PC at work, I did tell it not to sync at that time because I wanted to wait and sync it at home. Now that iTunes on the home computer doesn't see the device, I can't figure out how to change that...

Can I assign specific ring tones to certain contacts?

I would like to be able to assign specific ring tones to certain contacts; how do I do this (assuming it can be done)?

My phone has not arrived yet, but I would think you could solve this by doing these things.
Now lets just assume that you have ringtones A - Z
Set the phone to ring all the time with ring A
Then go into your contacts and set each person you know with ringtone B - Z (but you have to do this for each contact IN your phone) and you can't use A because you only want it to ring with that tone when someone you don't know is calling, right?
Then, when your phone rings with a private caller or from some # that is NOT in your contact list, it will ring A because you have assigned all other contacts either B - Z. The only difference would be that if "Joe" was calling from his office and the line out was different than the # you have in his contact, it would also ring tone A.
Of course, if you could download tones, it would be easier, but for now you can't. So, this is the only thing that would possibly work for now.
Did any of that make sense?

How can I create a new ring tone for my iPhone 4?

How can I create a new ring tone for my iPhone 4? I followed the Garage Band process and ended up with the ring tone I want as a AAC audio file. It got stored in my iTunes a a song rather than a ring tone. How do I make it a ring tone vs. a song? I tried dragging it t the Ring Tone category at the bottom of the ITunes list, but it won't alloow me to move it?

There's also an easy to use Applescript over at Doug's Applescripts for iTunes. It automates the whole thing. All you do is set the start and stop time on a file in iTuens and run the script. It will do everything else.
Make Ringable v1.1
http://dougscripts.com/475

How can i set up different rings/tones for incoming emails for different email accounts?

HI, I would like to be able to hear different rings/tones for emails coming from different email accounts. Eg, One sound for incoming email from gmail and another sound for incoming e-mail from Yahoo.
Thanks!

" Is there a possibility to set up different ringtones for each of the emails separately? "
No. Maybe with ios 6 this fall.
"Also would there also be an option for high priority emails to have a different ringtone as well?"
No. Maybe with ios 6 this fall.

How to set up different ring tone for Facetime

how to set up different ring tone for Facetime

I don't think that on an iPhone that FaceTime has a separate setting, you can only set a ringtone (which will apply to phone calls) via Settings > Sounds, or set different tones for different contacts via the Contacts app - but you can't have a separate sound for FaceTime

CCM 4.1(3)sr3a different ring tone for different line

Hi there,
I've got a dual line 7941 phone and would like to configure different ring tone for each of the lines. eg. I've got ext 100 and 101 on my phone. i would like the phone to ring differently when a call comes into 100 and 101 so i can know just by the ring tone which number has been called.
Can anybody help?
Cheers,
Jesminder

Jesminder,
Unfortunately ring tones are configured at a phone level. In order to do this you need to go to the phone, push the settings button, select ring type. From there you will get a menu. Line 1 of the menu is the default ring. Line 2 and on corresponding to your line numbers in order. So if you want CallManager line 2 to be a different ring tone then you will select line 3 from the ring type menu, it should have the extension number next to it.
There also might be a way to set it via the web interface. You would want to post in the Ip Communications - Ip Phone services for end users forum.
Please rate any helpful posts
Thanks
Fred

Different ring tones for different email accounts

Is it possible to set different ring tone for different email accounts?

No - but you can change the sound for the email the notification in the settings .... Settings>General>Sounds>New Mail> and select another sound from the list, but that will use the same sound for all of your email accounts.

I set a Special Ring Tone for One of my contacts and now I want to set the standard tone again. How can I adjust the iPhone to always use the standard tone?

I set a Special Ring Tone for One of my contacts and now I want to set the standard tone again. How can I adjust the iPhone to always use the standard tone?

Yeah, I did. But if I go to settings and change the standard ring tone again, the ring tone for that special contact is still the old standard tone. But I want to 'tell' my iPhone/iPad that this contact should always have the standard ringtone from settings.

6220 Classic - ring tones for individual contacts ...

My partner and i both got the 6220 classic at the same time.
On his phone he can select a contact, then options and scroll down to ringing tone and have a different ring tone for each contact or group. When I do exactly the same, it says under the contact name that their ring tone has been changed, but it still plays the standard tone. Despite saying that each contacts ring tone is different, it just plays the same one for each.
Is there a setting somewhere which we've missed? Can't understand why it works fine on one phone but not on the other.

Nope, not currently... but hopefully that change is coming in an update.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Does iTunes still offer ring tones for iPhone?

Does iTunes still offer ring tones for iPhone? I cannot seem to locate it on the web site.

Yes.
Some songs available via the iTunes store are also licensed to be sold and used as a ringtone. You can use the iTunes ringtone creator to create a ringtone for your chosen segment of a song that is also licensed to be used as ringtone.

Old ring tones for BB10

i made a collection of ring tones for you in zip format for you to use
no guaranteee if it works but it should
i test in a bit
if work ok let me know
enjoy
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V
Attachments:
old ring tones.zip ‏4767 KB

rat-7 wrote:
I have downloaded the ZIP file and copied the content into the Z10, but when I try to use them in the SETTING > NOTIFICATION, I get the listing of all of the pre-install notification, but I can not get to the new notifications
Where am I suppose to place them on the phone so that the system will find them
After you click to choose the ringtone, you'll see the pre-installed ones listed, at the bottom of that list you'll see "Browse music..." choose that and navigate to where you saved the other tunes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Differentiate ring tone for internal/external call

how to differentiate ring tone for internal call and external call?
rgds,
walad.

Floyd,
Those parameters were changed in 4.1 CCM. I don't believe they are going to affect Ring Type but could effect CFNA or CFB settings.
?Use the Call Classification field in the Cisco CallManager Administration Gateway Configuration window to configure H.323 and MGCP gateways with the option for OffNet, OnNet, or Use System Default.
?The default value for H.323 and MCGP gateways specifies OffNet.
?The default value for intercluster trunks (ICT), or trunks other than SIP trunks, specifies OnNet.
?In Cisco CallManager release 4.1, Call Classification replaces the H323 Network Location, MGCP Network Location, and MGCP Network Location OffNet for E1 and T1 service parameters.
?To configure trunks and gateways, the administrator can use the Call Classification clusterwide service parameter and choose the Use System Default option for the individual trunks and gateways.
?By default, the service parameter specifies OffNet.
?You can also configure trunks and gateways individually.
?The system considers FXS and phones to be OnNet; you cannot configure them.
The only way that I know of to achieve what you want is dual-line. Ring settings can be set per line or a default for the phone. You could use a unique inbound Gateway CSS with a 2nd line on the phones just for inbound calling. Then you can specify the ring on the phone to be different for the second line.
There is nothing in 4.1 and below (again to my knowledge) that will allow for distinctive ring per call. You should double-check the 4.2 and 5.x release notes to make sure there isn't a new feature though.
Please rate any helpful posts
Thanks
Fred

IPhone only rings for certain people

any way to get my iphone to only respond to certain people? i would like only one or 2 people to be able to make a sound on my phone at night, so when they call, it wakes me, and other sounds, general email and text, not to make a sound at night.
i can obviously put it on silent but then those one or 2 people where the sound is important, wont make a sound on my phone so wont wake me...

Call AT&T support (dial 611) from the phone. Maybe they can run some tests to your phone from their end.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group 
Creator of Mac611 - Mobile Mac Support (designed exclusively for an iPhone/iPod touch)

Is there a way to change the ring tones for notifications in the various Playbook applications?

For example, our dogs bark every time the Video Chat notification sounds because they think the doorbell is ringing. It would be great to be able to have a selection of tones for the various notifications.

Simple answer, No.

Ring tones for certain people

Similar Messages

Maybe you are looking for