Ringback Tone issue

Theowner of this account is my dad, however I log on every now and then to get something. Specifically, ringback tones. In the store, I set the "shopping for" option to my phone, and once I did it said that it would be set for my phone. I called my phone to test it, yet it didn't play (instead, it played my old ringback tone which I purchased through text). I have no way to check if it actually did get sent to my phone because when I look at the options to manage tones, it only shows me the option to manage them on my dad's phone. How do I see tone options for MY phone?

Each phone number needs to have it's own log in and password for MyVerizon - backup assistant and ringtones/ringbacks management is linked to each number exclusively.
Log out of Dad's account - perhaps even close the browser to ensure your are completely logged out. then go to verizonwireless.com and REGISTER with YOUR number. It should allow you to create a log in username and password for that number.
If it tells you the number is already registered, then you'll need to clear the cache and delete cookies, or use a different browser to create the separate accounts.
Once your number is set up with it's own account, you can manage YOUR ringbacks from MyVerizon. If you have the iPhone, you can download the MyVerizon app and manage them from your phone as well.
Hope that explains it.

Similar Messages

  • Ringback tone issue on outbound call with full E.164 number between 2 sites

    Hi there. 
    We have been encounting issue where site A calling site B with full E.164 number users expereiencing no ringback tone on caller while phone is ringing on site B. 
    In CUCM, Route Pattern is configured to use TEHO for long distance call. For instance, if site A dial site B with full number with area code, call should be sending out via site B VG.
    It was working fine until recently, there is no change made on VG nor in CUCM.
    I have attached dial-peer config of site B, should i add below subcommand under all dial-peer # pots?
    progress_ind alert enable 8
    progress_ind progress enable 8
    progress_ind connect enable 8
    //Site B dial-peer config //
    dial-peer voice 1 pots
     description #### incoming calls ###
     translation-profile incoming CoS-E1-CIRCUITS
     incoming called-number .T
     direct-inward-dial
     port 0/0/0:15
    dial-peer voice 2 pots
     description ### outgoing calls ###
     destination-pattern 0.T
     port 0/0/0:15
    dial-peer voice 3 voip
     description ### PSTN call to CCM ###
     destination-pattern 15..
     voice-class codec 1
     session target ipv4:10.x.x.x
     dtmf-relay h245-alphanumeric
    Thx
    Fei

    Yes I have expereinced this too..Even when you call an external number and the user rejects the call, you hear a normal ringback tone over sip trunks..I think the issue is that the ITSP sends a 183 session progress or 180 ringing even before knowing what the state of the called device is..
    You can send us a debug ccsip messages for a test call and we will be able to know exactly what is going on
    Please rate all useful posts
    "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

  • An error message everytime I try to buy a ringback tone

    there is a problem with the ring back tone  keeps on popping up error message

    Have you  activated the Advanced Calling feature?  That and ringback tones don't get along, and ringback tones are unable to be used if you have that feature.
    If that isn't the issue, then call customer service and see if they can figure it out - 800-922-0204 or *611 from your handset.

  • Ringback Tones: System error occurred. Please try again later. code: 4033

    I am consistently getting this message when attempting to manage my Ringback tones with the VZW Media Manager, it partially comes up then that error appears.
    "System error occurred. Please try again later.
    code: 4033"
    Any ideas? I've sent this to Verizon but received no response.
    Another thing, the Media Store is extremely slow most of the time and unresponsive, are they planning on resolving this issue?

    Ok, this is even more weird, some serious system issue apparently.
    I am unable to login to the Media Store now, it tells me it is unavailable.
    Then when attempting to click the "Manage" link on the Media Store homepage under "Ringback Tones", it redirects me to a Yahoo! Page that says "Page Not found".
    Anyone else having these issues?

  • How do you use a ringback tone on an Iphone 5?

    I am having great difficulty using my ringback tone on my iPhone 5.  Any thoughts?

    Moenetta,
    You've come to the right place for help! Being able to customize your phone and ring back tones is definitely a great way to do that. What specific issues are you having with the ring back tones? have you already bought the ring back tone? How did you purchase the ring back tone? Please provide details so I may better assist.
    JohnB_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • My ringback tone has quit working

    I replied to the text months ago to renew it?????

        Hey drvols,
    I'm sorry to hear about the issues you are having with your ringback tones.  I absolutely want to get you back up and running because I know how fun ringback tones are.
    View these steps,http://vz.to/19ZjZGQ, to manage your ringback tones.  If you are still having issues, please let us know and we'll continue to troubleshoot.
    NicholasB_VZW
    Follow us on Twitter @VZWSupport

  • Ringback tone playing something NOT on my list

    My husband and I've had ringback tones on our phones for a couple years now.  I've never had a problem buying them and managing them online for both lines.  This morning, both of our phones have started playing "You Are So Beautiful" as the ringback.  I've never bought this for either line and when I go online, it's still showing the correct song that we had on there before, but that's not what's playing.  I even tried buyting 2 new tones and changing them, still the same song.  Anyone know what could be going on? 

    Thanks rreihart!!!  Good to know it's not just us.  I wish they would put something on their website when things like this happen so the problem is easily solved just by going to their website.  It's funny because my husband works nights and he called me at 6am this morning and asked what in the hell I had put on his phone.  I didn't understand what he was saying.  Then he told me to hang up and call him back.  I told him I hadn't done anything.  He wasn't mad or anything, just didn't understand why that dumb song was playing on his phone.  One of the guys he works with had told him about it when he called him last night.  Then I tested mine and got the same thing.  I figured it was a Verizon issue, but was surprised that nothing was showing up on a search.

  • Are ringback tones supported on the 4G network???

    I work for another popular cell phone service provider. The company I work for uses GSM/UMTS, instead of CDMA like verizon does. I recently learned, at work, that our 4G network doesn't support ringback tones. I was wondering if the CDMA network does, or not. Does anyone around here know anything about it??? Thanks in advance for any useful info!

    Any 4G phones that Verizon releases in the next several years will HAVE to have 3G and probably 1X radios also included, meaning they can be used with the Network Extender and in areas that do not yet have 4G service.  It makes no sense for Verizon to sell phones that can only be used in a limited portion of their calling area.
    By the time this is an issue and Verizon is considering turning off 3G, I'm sure you will have replaced or upgraded your Network Extender.

  • Ringback tone didnt transfer

    I recently got the Thunderbolt and my ringback tones didnt transfer over. I have tried numerous times to get into all the v cast apps and they will not open on my phone. I tried to do it on here and cant cause it is on another line not the primary line. Anyone else have issues with v cast or their ringback tones?  Starting to think Im really gonna hate this phone!!!  Also lose data connection had to do system reset 3 times already!!

    Ringback tones aren't stored on the phone, they are on the network.
    If they are missing it's not because you have a Tbolt.  Having issues with vcast apps is not the same as losing your ringback tones.
    Have you tried signing in to the site itself directly to set them?  Or make sure you still have a ringback tone subscription (which also wouldn't have disappeared for a phone upgrade).
    You can do it from here, just don't log in as the primary number, register a member account for the number you're specifically trying to see the rbt for.

  • Ringback tone static

    purchased a ringback tone for my daughters phone.  logged in to her media store account and added it as the default. called to check it and all i get is some awful static noise. removed it and the default veruzon ringback sounds fine. added the new ringback to each day of the week as the default and same issue, nothing but static when i call. suggestions?
    tried buying another ringtone and the result is the same. nothing but static.

        Hi newrider1969!
    I reviewed my references and I'm not showing any known issues with Ringback Tones, so I'd sure like to look into this further for you! Please feel free to send me a DM with your name & mobile number. Thanks!
    Christina B
    VZW Support
    Follow us on Twitter @VZWSupport

  • Ringback tones do not play, still just ringing iPhone 4

    I've read through the different questions and nobody seems to get the question answered.  I subscribe to the ringback tone feature and purchased 3 ringback tones through the media store to put in a jukebox.  I put the jukebox to the default field but when I call my phone number, all hear is ringing. I've had ringback tones on different phones and had no problems.  Is this an iPhone issue? It shouldn't be this difficult.

    You have to go under your Vzw account and that's where you would find how to fix it since it is online only to buy them or change them. Are you still paying .99 for the service? If you aren't then that's why you don't hear them.  I thought hey lasted a certain amount of time.

  • Ringback Tone not heard in Arc Connect queue

    Hi All,
    Got a strange problem thats been ongoing for a while now.
    Our customer has recently migrated to SIP and since this point I am having to force the external ringback tone using command disable-early media 180. In addition they have an Arc connect solution which now when transferring callers into the queues and then being passed to an agent, they do not hear ringback there is just silence. In queue messages and MOH is heard within the queue.
    I'm pretty sure this is a DTMF issue but I have tried everything to rectify this with no luck.
    We are unable to create a SIP trunk to the CUBE as CUCM 7.1.2 does not support this hence h323 gateway.
    The flow is as follows :-
    SIP > CUBE > h323 > CUCM > Arc
    CUCM Version :- 7.1.2
    Arc Version :- 5.1.0.403
    I've attached sanitised config.
    Any help would be much appreciated.
    Cheers

    You most likely right by saying this is DTMF related, I had a similar issue in the past, going H323<>SIP on a CUBE and played with the dtmf settings on the dial peers, and ended up with:
    dtmf-relay h245-alphanumeric rtp-nte 

  • Ringback tone announcement

    I really do not like hearing someone's ringback tone being announced when I call them and I equally do not like my Verizon Ringback tone app announcing it either.
    I prefer having the same control over my ringback tone application in the same way that I have control over my ringtone announcements.
    What can I do to change this setup in my droid?

    My contract with Verizon has expired, I am considering whether to keep the
    phone I currently have or renew my contract and upgrade to a newer version
    of a droid, get an Apple iPhone or some other newer technology.
    I have 2 other cell phones on my account that are also eligible for
    upgrade. I spend what Verizon may think is not a lot of money but to me it
    is a significant amount for 3 cell phones, and Verizon's services.
    I have been in sales long enough to know that:
    1) The customer is ALWAYS right.
    2) That reminds me, the CUSTOMER is always right.
    3) Did I mention that the CUSTOMER IS ALWAYS RIGHT!!
    When a sales person tell me that "That's just the way it is".
    That tells me a few things about that person and the company he or she
    works for:
    1) They did not hear a word I said
    2) They have no interest in hearing what I said.
    3) What he or she is really telling me is:
    We really don't care. Take your business elsewhere.
    I get a 20% discount because of the company I work for, who has an account
    with at least one other cell phone provider.
    I can take my business some where else if it pleases Verizon who seems to
    have no interest in listening to my concerns.
    No that's OK, I understand. I recognize that you're a representative of
    Verizon and you're just doing you job.
    Now I have a choice to make.  I'm going to go to my local Verizon store and
    give them an opportunity to hear me. If they can't or won't, that will seal
    my decision.
    Verizon has a number great services and products that I like and have
    enjoyed but consumer loyalty is very thin and it only takes one issue for
    the consumer to recognize, there is a need for a change.
    Sent from the DROID RAZR HD of Fred Jarvis

  • Ringback tone for my iPhone 5s

    Does anyone know how to get a ringback tone for my iPhone 5s via verizon?

        Heather76, please don't stop the music! We can help you mange the ringback tone feature for your mobile number. Please follow the steps provided below:
      • Open the Verizon Media website here: http://vz.to/1k15MxR
      • Select Manage Ringback Tones.
      • Select My Ringback Tones.
      • Select the Ringback Tone you want to set as your default.
      • Select Set as Default.
    For more information regarding how to manage your ringback tones, click http://vz.to/1ccKJTE Keep us posted if you continue to have issues managing this feature. We're here to help.
    LasinaH_VZW
    Follow us on Twitter @VZWSupport

  • How do i put a ringback tone to my iphone,

    how do i set a ringback tone on my iphone

    You would have to ask your carrier if they offer this.
    It is not done with the iphone.  Your carrier would have to do this.

Maybe you are looking for

  • Intra company STO for product under consigment from vendor

    Hi I know in 4.5 we were unable to transfer inventory under vendor consignment between plants using an STO. This was driven by the STO having item category U and consignment needing item category K. It looks like this also remains true in ECC 6.0 but

  • In a pages document can I copy a ruler and apply it to text elsewhere in the document

    While working in a pages document can I copy a ruler and apply it to text elsewhere in the document?  I'm using Pages '09, Version 4.1 (923), on a MacBookPro with OS X, version 10.6.8.  I've tried pages help, but I haven't found an answer to this que

  • Java Program executing on foreign PC

    Hello, I have the following Question: I have written a Project in Eclipse called my_prog which is containing the default package and 2 other packages (p_client, p_server) The "Runner-Class" with the main method is in the default package I can execute

  • TSQL for capture and insert to a user table when blcoking is happening on a SQL server

    Hi, I am searching for a TSQL which will capture the blocking script to a table with execution plan and all other necessaryu details. I tried with below script but its not giving the text for blocked statement I t will be nice if i get RequestingText

  • Parse url

    Hi all, I am looking for some example code on how to select out certain data from a URL and save to a text file. I can easily save the entire page to a text file but I only need some of the data- for example, the information between tag �A� and tag �