Ringback Tones Times Limitation Problem (poor web design)

When managing ringback tones times, I found the Start time cannot be later than the End time.
This limitation (to continue from PM into AM) should be removed.
I would like to set a ringback tone for Non-Business Hours and weekends: 6PM-7AM MTWTF and Full day on weekends.
I cannot do that because my desired Start Time is PM and the End Time is AM.
The previous web interface would allow to go past midnight on time set.
Also, it would be good to control minutes (from 7:30PM to 5:45AM, not only 7PM to 6AM).
Please, advice.

This is a user forum. You can submit feedback directly to Apple at http://www.apple.com/feedback/itunesapp.html .

Similar Messages

Parental Controls time limitation problem

Is there anything I could to to force Parental Controls time limitations to work? I've set time limit for my son's account to 1 hour per day, weekends the same, bedtime (school nights 10:00 PM to 7:00 AM and weekend 10 PM to 12 PM). In reality computer doesn't log out my son from his account and he can play endlessly.
I have clean MacOS X Lion setup, no old settings were restored. Update 10.7.2 came out but didn't solve anything. Snow Leopard worked flawlessly. Lion has bunch of problems which I cannot solve and figure out... (still have wifi problems, etc.) But at least if Icould get time limitation to work...
Mac mini 2010 model (2.4 GHz Core 2 Duo, 4 GB RAM).

Yes, the parental controls are enabled, but now.. it works. Thanks anyway for you reply
Regards.
Andrea

Please could someone Help (installation Problems on Web design Premium cs4.)

hi there everyone, sorry I'm new to this and probably in the wrong place. But hope someone is kind enough to help me. When I place disk one in I put in the serial code and everything pops up and looks good however, when I want to download the only one I can select to put on my computer is Acrobat non of the other programs will select. it'll download that fine then says complete then an exit button. I hope someone can see if there's something I'm doing wrong or if you think I've got faulty disks, this is a student version.. (not sure this makes a difference but thought I better say just incase.)
Many thanks for anyone who can help.
Lara

Hi - I bought the student version through my college and was so EXCITED! Then it took me over 8 hours (and much of that on the phone to Adobe support) to get the suite installed.
In the end it turned out we had to stop all the Microsoft and Windows processes in Task Manager during the installation - something to do with 64-bit vs 32- bit (I have a 64-bit version of Vista running)
This was scary to me as I do not like to mess with Task Manager in case I mess something up...
I would not reccommend doing this just on my say-so without getting more help, but it could give you a starting place for asking more questions.
I will say, that although it took what seemed like forever, and at times she seemed as stumped as I was, the woman at the Adobe end of the phone was very patient and helpful.
Good luck,

Web Design Market

Hi, I recently started going back to my web design which I left a few years ago when I started my master. At that time I was a web designer working with Freehand, Dreamweaver, Flash, Fireworks, Photoshop etc, My focus was interface design for computer applications, graphic design and mainly web design (only interface design and client side programming such as actionscripting for Flash), I tried to learn server side programming like .net C++, C # VB, ASP etc but found them so hard to catch up, as far as I never had enough time for both Graphic side (interface design) and programming, at the end I chose to stick to my interface design and leave server side programming to experts.
Considering all these, that now I'm going back to my old habit, interface design for websites, want to know how market is for this right now?
I know if you go for server-side and .net even though many are outsourced to India still there are opportunity but interface design which I mean the combination of Illustrator, Dreamweaver, Flash, Fireworks,Photoshop is unclear for me.
Please tell me how do you see the market in this field (interface design). My worries are recently I felt a lot of people want a person to do everything together (database, graphic design, server side programming plus interface design!) and if this is true I wont go anywhere by focusing only on Illustrator, Dreamweaver, Flash, Fireworks,Photoshop at the same time there is absolutely no way for me to try ASP.net and similar applications , I never have time to focus both on programming and interface design. Would like you to share your experience with me.
In other words will I go anywhere in this market if I just focus on Web Design (interface design) with Illustrator, Dreamweaver, Flash, Fireworks,Photoshop?
(I don't use these applications for print media)
Thank you.

Dear Web Designer,
Why don't you post your Web Design question in the Web Design forum?
http://forums.adobe.com/community/design_development/webdesign
This one here is for comments about the forums as such. Such as they are!

Books for Learning Web Design

Hello, I have been working part time as a freelance Web
Designer and am now looking to learn more about such things as CSS,
XHTML, PHP, MySQL, Dreamweaver and Flash (and more).
Which books/ resources do you recommend? The O'Reilly series?
Any help would be GREATLY appreciated.
Cheers,
Derek

Nancy O wrote:
> I went to the university of hard knocks. When I began in
this business,
> there were no "classes" in web design. I learned from
viewing source code
> on other web sites and keeping text libraries of code
snippets to refer back
> to.
>
> Of late, I have heard tales of misfortune by people who
have signed up for
> web design classes only to learn later that the
curricula / instructors were
> sorely lacking. That's not to say there aren't some good
courses at the
> community or extension level, just choose wisely &
poll people who've taken
> those courses to see if they are satisfied before you
pay your dime. You
> can't learn everything at once. Pace yourself. Focus on
one or two things
> now like XTML/CSS. Then expand into scripts, dynamic
languages & databases a
> little later to give yourself time to absorb it all.
>
> Eric Meyer has written many articles and books on CSS
>
http://meyerweb.com/eric/css/
>
> www.Lynda.com is a good for self-paced study via on-line
videos and
> documents.
>
> David Powers has written some very good books on
building dynamic sites with
> PHP in DW. When you're ready, look on Amazon.com for
used copies.
>
>
> --Nancy O.
> Alt-Web Design & Publishing
> www.alt-web.com
>
>
>
>
> "Media Corp." <[email protected]> wrote
in message
> news:[email protected]...
>> Hi Nancy, thanks for your reply.
>>
>> I have been using W3Schools over the past few years
with great success.
> I
>> feel like I have learned a lot, and, most
importantly, I've learned that
>> teaching yourself can leave 'holes' in your
knowledge base (the term 'you
> don't
>> know what you don't know' comes to mind).
>>
>> I'm fortunate to have the opportunity to either:
>>
>> A) Study Web Design full time at a college
>>
>> or
>>
>> B) Round-out my current (self-taught) knowledge with
some great books.
>>
>> I think books (and definitely formal education),
have the benefit of a
>> coordinated, well developed 'curriculum'. I think
I've picked up enough
> bad
>> habits while teaching myself over the past few
years...so perhaps a more
>> 'structured' delivering would be good.
>>
>> But, I don't know. So any help would be greatly
appreciated!
>>
>> How did you get started in Web Design? What route
would you recommend to
> a
>> 'newbie'?
>>
>> Thanks again,
>> Derek
>>
>
>
I can recommend the latest David Powers book "The Essential
Guide to
Dreamweaver CS3 with CSS Ajax and PHP"
I started skimming this book and ending up going through
cover to cover.
I've learned a few tips about using Dreamweaver better,
especially
getting most from the way the CSS panel works and heaps about
PHP which
has made me rethink completely my approach to forms etc. Lots
of
titbits to fill in those gaps you mentioned. This guy is such
a good
communicator I've now ordered his book on PHP solutions as
it's got me
fired up to want to understand it better. I doubt I'll ever
be
programming from scratch but at least my troubleshooting and
customisation cabability should improve.
Jan

Problem Installing Adobe CS 5.5 Web Design Premium, Error Code 6

I just purchased Adobe CS 5.5 Web Design Premium. I've attempted installing it about a half dozen times now, maybe more. I am getting variations of "Error Code 6".
I have been through steps 1-3 of this page: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html but it hasn't helped (the error log is slightly different, but that's about it).
I have attempted to look at the descriptions, but many of the errors in my log summary were not on the list of errors here: http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html - however of the ones that were, I found this entry:
DF012 Installation source path does not exist: <path>
The installation files are corrupted.
Reextract or copy the contents of the installer.
Which is discouraging and confusing to me, as I have tried installation both from my new, just opened CDs and by downloading the installation files from here: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html.
I'm not sure what my next step should be to try.
Here's the log information (I deleted a lot of the space between lines (paragraph marks), if that is somehow important, I can paste it here without conserving space):
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 8 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.AE9C02P-1022rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Web Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\jlp\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\jlp\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
----------- Payload: {47CE893F-A0FF-4094-AA16-5209AEA7C7E0} Firefox Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Adobe CS5_5\payloads\AdobeContribute6.1-FFPlugin\OEM(Seq 32)
----------- Payload: {208DE3D5-541C-41B0-8595-7A608A6E4306} IE Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Adobe CS5_5\payloads\AdobeContribute6.1-IEPlugin\OEM(Seq 26)
----------- Payload: {4A4F91EA-5951-4C5C-B911-027D802817EB} Office Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Adobe CS5_5\payloads\AdobeContribute6.1-OfficePlugin\OEM(Seq 34)
----------- Payload: {DD309051-FACF-4A5E-87F1-C57154BB3DE8} Adobe Contribute CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Adobe CS5_5\payloads\AdobeContribute6.1-mul\OEM(Seq 8283)
----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Adobe CS5_5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
----------- Payload: {1C9D6B02-8B92-4E40-8B22-37D8C95430F0} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_USLanguagePack 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Adobe CS5_5\payloads\AdobeFireworks11.1.0en_USLanguagePack\OEM(Seq 74)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 ActiveX: Install failed
Note: references to Drive E are reference to my CD/DVD Drive. I am installing to my C drive and also have a 2nd hard disk D, which shouldn't be involved in the installation.
Also, this is a student edition, but as I've verified myself with Adobe and received my licence key, that shouldn't cause problems as far as I can tell.
My computer is running Windows 7 64-bit. Not sure if there's any other information that is useful in solving this issue.
Thanks for your help!

_Forge_ there a couple different technical documents relevant to the errors you are currently experiencing. I would recommend reviewing Error "1721 [or 1722]: There is a problem with this...package" when installing | CS4 | Windows - http://helpx.adobe.com/creative-suite/kb/error-1721-or-1722-problem.html and Error 1603 | Install | CS5 products - http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html.

Problems with Responsive Web Design

Not really sure how to ask this, but here we go. I am new to responsive web design; always worked with html coding and tables like in Front Page. I have the concept down of sections, then containers, then columns if needed to place my content and images. Several times in my process, I get a page done or nearly done, and then later on, my text or images re-arrange themselves and overlap themselves. In other words, the text layers itself on top of another text. The two images below were laid out perfectly just a little while ago.
The max width of all containers on the page is 940px. It works great, until it doesn't I have not changed any margins or anything to make this “overlapping” of objects occur. I get satisfied with a page, and all the sudden, magically it screws up. What am I missing here? If I highlight the container, it shows a margin on the left of 342px, and a margin on the right of 343px. Looking at the CSS Designer however, these numbers do not show up. Only the 940px. I am not changing the CSS either prior to this event happening. This occurs whether in IE or Chrome.
In this first image, the red breadcrumbs started out being parallel with the search feature, and should be in the gray area. The gray menu text, was in the white area above the gray bar when it looked right. Both sets of items (i.e., red breadcrumb and search feature are set in two columns. Each column with is 50%.
In this next image, the items in the black bar were side, by side. Now they are not, and I did nothing to them or the stylesheet. The mail image column is 8.333%, the join text is in a column that is 25%, and the join us form is in a column that is 66.666%.
Hope this helps you help me! Very frustrated.

Here is the link:
http://www.destiny-seminars.com/dev/index.html
The dev directory contains:
index.html
contact.html
speaking.html
training.html
about.html
The first page to look at where I had the most recent, most completed page, is - about.html. That will be my template for the rest. Also, there was supposed to be a feed from my blog showing up on this page; it was also perfect at first. Then, my shaded black site links section and and the copyright footer quit showing up. When I commented out the blog feed code, the footers showed up again. At one time, it all was working. so this is yet another problem I cannot figure out why stuff is changing seemingly by itself.
These pages were originally created in an online tool called webflow.com. It worked great, but they did not honor the full trial changes before they made site updates that eliminated any free use at all. This code for all files and images were exported into a zip file. The CSS files are titles as follows, in the css directory:
normalize.css
timothy-hartwell.css
webflow.css
Please help!

First time using inDesign for multi-page web design. Trying to "print" a pdf or jpeg to show client. But it comes in blank (white) but file size is 1.8mb. help!, First time using inDesign for multi-page web design. Trying to "print" a pdf or jpeg to show

Have created a web design using Master Pages. 5 pages in all. When I try to create a proof with pdf or jpeg the result appears blank (or white). How do I create something that I can send my client?

Hello all,
I appreciate your willingness to help.
Did a test. Copy and pasted a page of my graphics into a new indd file and into a new master. New file works fine for exporting jpeg as well as pdf.
Must just be something wrong with the original. gremlins. No time to wonder why.
but....Thank you again.

BEX web designer 7.0, update roll time update with check box?

guys this is what i am trying to do?
i have few reports on some cubes,
i have created some queries on the cubes,
created a web template and in item i have placed each query with data load time, so i get the last time the data was updated.
now what i want to do is.. if the data was laoaded yesterday, i want the web template to check if it was loaded today or not, if yes then put a check box in the web template that would be clicked? if not then it would be unchcked with the last time loaded.
in the query designer , i only have the time status of the last query updated, the query is suppose to update everyday? but it can also be updated everyday twice, as once in the morning and once in the evening.
so how do i go and create , an if statement that if date 1(yesterday) is not equal to date 2(today), then have the check box in the web template be checked?
can i create a conditon or exception.. any ideas would be helpful i am stuck...

i start using visual composer.

The time limits on the parental controls do not work. Apple does not seem to know how to fix this issue since the problem has been going on since at least leopard.

The time limits in the parental controls do not work. I have several mac systems and they do not work on all of them. Also, I have had this problem since at least snow leopard and it is very frustrating that Apple is unable to fix a simple issue like this. All they have to do is somehow 'hard-wire' the time limits to the system clock but they are not listening. I used the feed-back feature in their support webpage and hopefully everybody else experiencing this issue will too. Thus, if they get a thousand notes on this issue they might listen and finally fix it.

Well, the whole system with those time limits are funky. Sometime this happens, sometime that happens. When the user is on the bed time limits do not work nor do the length of time limits. It is very frustrating as one of the reasons I bought an apple in the first place was those parental controls which did not exist in Windows prior to Windows 7. I do have a Windows 7 machine now and the bed time limits work there. Maybe you have a Windows 7 machine as well and can let them use it.

Creating standards-compliant web designs with Fireworks CS4 Problems

Hello,
i have some problems with using background image slices.
here is it(from the DevNet arcticle creating standards
compliant web designs with fireworks cs4):
With this feature, seeing really is believing, so let's get
straight to it:
1. Create a new 500 × 500 document.
2. Draw a 200 × 40 rectangle.
3. Set the background color as #000099.
4. Set its fill to be a Linear gradient.
5. Change the first Gradient node's color to #9999FF.
6. Select Edit > Insert > Rectangular Slice.
7.
Change the following properties In the Property Inspector:
* Name: bg_rect
* Width: 1px
* Type: Background Image
* Repeat: repeat-x
* Horizontal position: left
* Vertical position: top
8. Using the Optimize panel, set the slice's export format
to GIF - Exact.
9. Export as bg_slice.htm using CSS and Images.
10. Locate the file and preview it in your primary browser.
i followed these steps exactly but i get no tiled background
only the 200 x 40 rectangle.can anyone tell me what's wrong ?
Kind Regards,

I followed these steps exactly and also viewed the HTML/CSS
exported in Firefox 3.0.5, and the rectangle appeared with the
correctly tiled gradient background. (I'm on a Win XP SP3 machine.)
I tried changing the canvas color to transparent, moving the
rectangle and slice around, changing the width of the slice, and
even changing the horizontal and vertical positioning of the
background image, and the export was still correct. Is it possible
your background image slice is not placed over the gradient? Have
you looked at the CSS exported to confirm that "bg_rect.gif" is
listed as the background image for the DIV and that the .GIF file
is being exported and is a narrow gradient image? Are all of the
export options correct? (There's only a few export options for CSS
and images (.htm), so I doubt this is your problem...)
At risk of asking the obvious, are you using Fireworks CS4
with the updated CSS/HTML extension from the article installed?
HTML/CSS export works differently between CS3 and CS4 - John
Wylie's extension was created for CS3, and Matt Stow updated it for
CS4.

I am a web designer and every time I make changes I have to clear my history to see the changes. Is there a setting I can change to fix this?

I am a web designer and every time I make changes to my website I have to go in and clear my history so that the changes show up. Is there a setting that I can change so that I do not have to do this every time??

You can reload the page and bypass the cache with:
* Press and hold Shift and left-click the Reload button.
* Press Ctrl + F5 or press Shift + Ctrl + R (Windows,Linux)
* Press Shift + Cmd + R (MAC)
See [[Keyboard shortcuts]] and [[Mouse shortcuts]]

Problem with SPA232D + SPA302D ringback tones??

I recently installed a new SPA232D ATA and SPA302D DECT handset onto our office network, which already uses a trusty SPA525G2 desk phone. Both the SPA525 and the SPA232 register with a hosted SIP provider on separate lines. I don't have any other phones (analgoue or otherwise) connected to the SPA232. After configuring the device and entering a bunch of regional settings, most things with the new phone work as expected.
However, when I use the SPA302 handset (via the SPA232) to call the SPA525, I hear an odd ringback tone that sounds only once followed by silence until the call is picked up or goes to VM. The destination phone continues to ring and can be picked up as normal to initiate the call. Also, the tone is different from the ringback tones entered into the regional settings of either device. Calling other phones and other numbers (outside my SIP account) result in ringback tones that are correct for our region. I did a very quick syslog capture with wireshark and I see a 100->183->200 SIP sequence on these calls, whereas other calls seem to show a 100->180->200 sequence. I didn't see any 182s. Not sure if that is important.
Any idea what might cause this?
Also, a couple of other minor problems reagrding the SPA232D + SPA302D combo:
- The SPA232 will not automatically register to the SIP service after a reset or power cycle, and makes no attempt to reconnect after the intial failure. It will register immediately, however, if the voice component is restarted after a config change in the http GUI. I have set network delay to 0, but noticed no difference.
- The SPA232 (or SPA302) seems to ignore most regional settings. Changes to tone frrequencies and cadences in the config make no difference to the tones heard through the SPA302. Do these need to somehow be resynced with the handset?
Any thoughts greatly appreciated.
With thanks,
Nick

the ringback tones entered into the regional settings of either device. Calling other phones and other numbers (outside my SIP account) result in ringback tones that are correct for our region. I did a very quick syslog capture with wireshark and I see a 100->183->200 SIP sequence on these calls, whereas other calls seem to show a 100->180->200 sequence. I didn't see any 182s. Not sure if that is important.
It IS important. The 180 code is "generate ringback tone locally" command. The callers phone will create ringback tone according it's (regional) configuration. The 183 code is "I will sent you ringback tone as audio" - so local phone generate no tone, just play what it come via audio channel from called device or target exchange to it.
So you need to check configuration of exchange that connect call from SPA232D to SPA525 (e.g. call with broken ringback tone).

Ringback tone problem

I m having a problem putting a ringback tone on my new 4s iPhone. Can anyone help

I love ringback tones! Whomever invented it was a genius.
In addition to what Adam E. says, you can go to ringback tones frequently asked questions.
I think #17 will help you set the ringback tones for you.
Again, if we haven't answered your question, tell us what you need help with and we can provide additional information.
Thanks!
Tamara H.
Follow on on Twitter @VZWSupport

I have used fire fox for a long time but have nothing but problems loading web sites..i think the time has come to uninstall firefox and go with internet explore..im tired of wasting my time trying to load web pages.

Question
i have used fire fox for a long time but have nothing but problems loading web sites..i think the time has come to uninstall firefox and go with internet explore..im tired of wasting my time trying to load web pages.

does not solve problem..guess i'll have to get rid of firefox..never had problen before but to much hassle loading web sites.

Ringback Tones Times Limitation Problem (poor web design)

Similar Messages

Maybe you are looking for