Ringer mode not functioning

the ringer mode of my ipone4 is not functioning..i tried to refresh my phone by turning it off then turn it on after few minutes but doesn't work. what should i do?

Have you checked the Mute button? Have you checked the volume settings? What happens if you attempt to turn up the volume with the side buttons, what do you see displayed on the screen?

Similar Messages

After upgrade to 10.8.3 Sleep mode not functioning

iMac
OSX 10.8.3
Sleep mode does not function properly.

In what way is it not functioning properly? If you go to System Preferences > Energy Saver are the sleep mode times where you want them? When you logout, do you then click Sleep or do you let the iMac go to sleep according to the settings? Do you have trouble coming out of sleep mode?

Sleep Mode not functioning correctly after Mac OSX 10.6.5 update

Hi
I have a Macbook Model Identifier 5,1. (1st gen Alum Macbook). I notice that after I updated to 10.6.5, I have a problem going to sleep mode. When I click on sleep, it will blacken the screen but the LED screen still glows. Usually, it glows for a few second and then the LED powers down so it will be completely dark. Now it just hangs there. I have to use the power down fucntion by pressing it for 4 seconds.
I tried disk utility repair permissions. ANy suggestions?
Antonio

Hi
I have similar problem with MacBook White Identifier 6.1. I have update 10.6.5 and I have a lot of problems with my MacBook. This problem is one of them. My MacBook also often show message Kernel Panic and I can use only power button. It is not good when arrange photos or do other things.
Update 10.6.4 was very good. I didn't have any problem. If I have version 10.6.5, can I return to version 10.6.4?
I don't know, what I can do. Any suggestions?
Thanks

Replace mode not functioning?

For some reason, replace mode is not "replacing" old audio on any given track. This used to work for me all of the time. Typically I would set up an autodrop zone, place the SPL before it, and put the transport into replace mode. Once I hit record the segment that was selected in the autodrop would disappear and the new audio would take it's place. Right now there is no difference in the way Logic is handling normal record mode vs Replace mode. I've deleted preferences and repaired permissions. Has any one run into this before? I have a feeling it's pilot error, but have been unable to find a solution.
thanks
bg
Dual G5 2.0 Mac OS X (10.4.3) 2.5 gigs o' ram

Justin, you are absolutely right. I was having the same problem with "replace mode" I went back and saw that the problem did not exist in Logic 6. Whenever I use the templates in 7.1.1 that's when the problems occur. When I use my Autoload I have no problem. So Yes, I can verify the same finding. I wonder if 7.2 has addressed and fixed this problem.
Anyone out there using 7.2 please let us know if the "replace mode" bug has been fixed, thank, ric
G5 dual powermac 2.5 / G4 powerbook 867 Mac OS X (10.3.9)

GPU mode not functioning, using ATI HD3870 or ATI HD3200.

When I run Pixel Bender in GPU mode, on either my desktop computer or my laptop, image loading fails with the following message:
"Error loading file: mandelbrot.png" (same problem with the other example files, and also for other jpg and png files).
and when I try to exit the program after failing to load an image, Windows 7 tells me it stopped responding.
When I run it in CPU mode, this problem disappears.
I think this is strange because I thought the HD3200(onboard graphics chip) or at least the HD3870 were supported.
Both my Desktop computer and my laptop are running Windows 7 64-bit.

I forgot to include Dxdiag information.
DirectX Version: DirectX 11
Card name: ATI Radeon HD 3800 Series
       Manufacturer: ATI Technologies Inc.
          Chip type: ATI display adapter (0x9501)
           DAC type: Internal DAC(400MHz)
         Device Key: Enum\PCI\VEN_1002&DEV_9501&SUBSYS_12001462&REV_00
     Display Memory: 2297 MB
   Dedicated Memory: 506 MB
      Shared Memory: 1791 MB
       Current Mode: 1440 x 900 (32 bit) (60Hz)
        Output Type: HD15
        Driver Name: atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.14.0010.0716 (English)
     Driver Version: 8.681.0.0
        DDI Version: 10.1
       Driver Model: WDDM 1.1
Driver Attributes: Final Retail

GT60-0NC Turbo Mode not functioning

My drivers are up to date. I also installed S-Bar and MSI VGA Overclck Tool. When I press the turbo button, "turbo on" message pops up. But 2-3 seconds later "turbo off" message pops up automatically. Why does it happen?
OS: Windows 7 Ultimate 64-bit

Quote from: flobelix on 15-October-13, 05:21:27
Uninstall S-Bar and reboot. Install Microsoft.NET Framework 4.5 and reboot. Install S-Bar 2.0 (Ver. 4.5) and reboot again. Install Nvidia VGA OC and reboot.
Now it should work again. If not uninstall current vga in safemode using >>Driver Fusion<< and after reboot install a MSI vga driver: http://www.msi.com/service/download/nbdriver-19264.html
If now works retry with a Nvidia driver: http://www.nvidia.com/download/driverResults.aspx/66702/en-us
If still no help try resetting EC: How to reset the EC (Embedded Controller)
Already done these steps except reinstalling driver. Will try that tomorrow.

My ringer does not work on my phone (not sure what happened, didn't smash it, nor did it fall to the ground), and I have been on silent/vibrate mode for a few months now. Unfortunately I am unable to listen to music without headphones, or get on speaker.

I can hear sounds when I plug in to headphones or on bluetooth (streaming audio from my car).
Can anyone help?
I have the iphone 4s.
Thank you!

Hey Chris,
Unfortunately the ringer does not work - which causes the speaker to not work when it's switched on to ring mode, unless I'm on bluetooth. It has recently stopped working and I've had this phone for 2 years.

Widgets Do Not Function in Browser, Only in Preview Mode.

I created a lightbox and a tabbed section on separate pages, and the wodgets do not function when I test in browser or or open html conversions in a browser. They test fine in preview mode.
Bill
Actually, the problem seems to be Explorer. Works fine in Safari. Frequently have to insert fixes for special problems in IE. Are there any fixes for IE's peculiar problems?
Also works fine in Mozilla FF & Chrome. Mulitple problems in IE with display, and Widgets are completely non-functional.

I am referring to the attached files, which are a Muse site conversion to html. I have had problems in the past emailing web info, so if you want me to ftp the files somewhere, I can do that. These pages have not been published yet.
The two pages in question are in the file. If you open them in IE, the widgets do not function. In the index page, the text in the New & Events area to the right are Lightbox links. In the cottages page, you can see the slide show in the main middle are and the tabs on the right in the shadow box.
The side show works off and on. The lightbox (index) and tabs (cottages) do not function at all. There are no error messages. IE does not indicate working links (no finger).
As I believe you know, IE has problems displaying things that other browsers do not. Dreamweaver templates, for example, include a blockquote instruction for html5 that is needed for IE to display certain items properly. Since the pages will function normally in Safari, Mozilla FF and Google Chrome, I conclude there is a problem with IE.
Hope this helps.
Thanks,
William Gunn

The keyboard for my iMac 9, 1 got wet and is not working correctlly. Delete,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I c

The keyboard for my iMac 9, got wet and is not working correctly. Delete ,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I can't login due to all caps and numbers being symbols. Is there anything I can do?

Buy a replacement keyboard. They're only $50-65 USD.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Preview Mode - Full is not functioning

View -> Preview Mode - > Full is supposed to let you
see the rest of the stage in full color when editing inside a movie
clip. That seems to not function. Instead the rest of the stage is
still ghosted out after you double-click a movie clip to edit it.
Grrr.
Bug?
In the past this feature has worked perfectly since Flash
4.

I agree -- this issue is really important for my work flow.
Can you please add it back as an alternatre option if it is not a
bug?

TS1631 no sound during music or video playback ringer/volume buttons not functioning

How to fix intermittent sound issues with my 4S? Volume control buttons are not reponding, music app has no sound, ringer pop up image has no adjustment bar, but ring tone is functioning for incoming calls, and so is speaker for both incoming and outgoing calls. Help?

Clean iPhone charging port with clean dry toothbrush.

HT4623 After I update IOS6 for my iphone 3gs, while i turn on vibrate (Using side button) is not supporting. Automaticlaly tur.n on ring mode. So please help me to resolve this issue.

After I update IOS6 for my iphone 3gs, while i turn on vibrate (Using side button) is not supporting. Automaticlaly turn on back to ringing mode. So please help me to resolve this issue.

No one facing this issue in 3GS? please help me.

Shape modes Expand button not functioning

Just installed CS4.
When I merge object using the shape modes line in the Pathfinder palette the objects are not dynamically merged but rather merged as when I use the 'Merge' command from the 'pathfinders' line.
This means the button 'expand' is not functioning either since the objects are already expanded automatically.
Does anyone have the same problem and is this a bug or am I missing something?

> The issue is that I would prefer the 'old' situation back
And I was not arguing with your preference. (I don't share it, but you're enttitled to it.) You said Add To Shape and Merge do the same thing:
> ...the merge function results in exactly the same as the simple merge using the pathfinder command. Two identical commands in this palette seem to be silly.
They don't, and so the presence of both of them is not silly.
You seem to think that the Shape Mode buttons are supposed to be just "live" versions of the Pathfinder buttons. They aren't. The Shape Modes are four basic set operations (union, subtract, intersection, difference), and can be applied as live or not. The Pathfinders are
additional operations (each with its own set of sometimes bizarre behavioral caveats), and cannot be applied as live effects.
But their being able to be applied as live effects, and whether live or expanded is default is immaterial as to whether one is superfluous or not.
Merge Pathfinder is NOT the same thing as Add To Shape Area expanded. The two only happen to result in the same thing under the special circumstance of same-filled unstroked paths. Merge (its inability to handle strokes notwithstanding) is an important path operation for things very different from the purpose of Add To Shape Area.
JET

My ringer buttons do not function and my video recordings have no sound

My ringer is not responding to the volume buttons on my iphone and my videos are now silent can anyone help please

Hi, does your iphone play any sounds? and try having a look at settings> sounds there is a ringer and alerts there is change with buttons and a slider. if the slider down? and is change with buttons on or off?

CS4 Show tool tips not functioning in adjustment mode

Show Tool Tips function is not functioning(no display) in any adjustment panel. Was working previously. It is checked in preferences and does work on uppermost main tool bar. At times it was slowish to respond but eventually did. Working with PS4 in Design Premium. Checked function box on and off several times as well as opening and closing program and also shutting down computer. Any help or something else I need to look at in preferences? Thanks. Bob
Edit: Tool Tips function works fine in "In Design" and "Illustrator" so it appers it has to be something in Photoshop

Thank you for your reply.
I tried that link several weeks ago and did a reset, I do not want to do delete the preference files if at all possible. I am certain that you know what my problem is but if you don't mind. I would like to clarify what is going on. Previously in the preferences file under the interface label there is a box to turn on or off the tool tips function. It has always been "on". Whenever I wanted to see what an icon's function was related in a panel I placed the cursor on it an it would show it's function. I. e. make a new layer, mask, etc. It no longer does that when I am in the adjustment panel. The function works when I click on it and that is not a problem. All I want is the tip or hint or label as to what the icon's function is to appear and that is what I ubderstand is what the show tool tips function I have CS3 running on another machine and this function it works fine. If I turn it off in the preference fill it no longer works I also have elements 8 on my daughters laptop and that is also fine...on works, off doesn't workI do not have any problems in the tools venue. All function properly and all sub menus work fine.
Any other suggestions will be appreciated. Thanks again for replying

Ringer mode not functioning

Similar Messages

Maybe you are looking for