Ringer Sound doesn't work for phone calls.

I can't get my iPhone 4S sound to work for receiving phone calls. Sound selected along with vibrate for phone calls. Miss calls everytime. Volume turned up and turned on.

Two things to check
Is the Mute switch ON ?
Do you have Do Not Disturb set ON ?

Similar Messages

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

After update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games

after update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games

Maybe I understood your problem. Get to Settings > Sounds > Ringers and Alerts >Turn Change With Buttons to Off. And if your Side Switch is assigned to 'Mute', turn it back on, else, use the control center to turn off mute.
P/s: And your name is...

The sound doesn´t work for games, videos and music,

the sound doesn´t work for games, videos and music, but it works if use my hearphones

Hi mellidani,
If you are having speaker issues with your iPhone, you may find the following article helpful:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Regards,
- Brenden

Ringer doesn't work for incoming calls

My iPhone 4 ringer won't work for incoming calls. It is not on vibrate only and the ringer works through the earphones when earphones are connected. Any suggestions?

Thank you so very much.
. Simple yet perplexing.. I bought the waterproof case and had them put it on before leaving the store.. GRANTED, I never read the instructions.. Just knew it must have been something in the way I programmed the phone. I especially loved that you put up an illustration with your explanation.
Mahalo,
Donna Jo

TS3274 Sound doesn't work for games but does for everything else!

The sound doesn't seem to work with the games but works with everything else ..... What's the reason for that and how do you correct that?

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

TS1702 I have bought the Recorder apps and now I have realized that it does not work for phone calls in Spain. What can I do?

Does anyone know it the Recorder apps only works in the U.S.? I think I made a mistake buying this to record some phone conversations for work and now I cannot record a phone call to a number in Spain. I mean my phone number is Spanish. Please help. Can you return an app if you are not satisfied?

Sorry, no. The terms state, you buy it, you own it, there are no refunds.

DTMF doesn't work for outbound call

We currently using UC520 and having strange problem. When we call through SIP for outbound call DTMF tone is not transmitting. and if I press multiple numbers with longer duration, It makes continuous tone on the other hand.
My current dialpeer uses DTMF relay RTP- NTE. I will attach sh run and debug ccsip message file. please help me this is being quite critical.

Seems like your SIP Trunk Service provider is not getting the RFC2833 packets or not interpreting them correctly.
I see on the log that you pressed 1, 2 & 3 and the UC520 sends all these digits out (each digit will have 7 packets - this post explains how to read this debug - https://www.myciscocommunity.com/message/14045#14045). So I know its not the UC520 - below is a snip for digit 1
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B86 timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1      Pkt:04 00 00 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B87 timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:04 00 00 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B88 timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:04 00 00 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B89 timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:04 01 90 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B8A timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:84 03 20 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B8B timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:84 03 20 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B8C timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:84 03 20 >>
In terms of next steps:
- Is there any router or NAT or firewall device between the UC520 WAN interface and the SIP Trunk service provider? If so maybe good to check if you can bypass this device or if this device blocks RFC2833 packets
- Ask the SIP Trunk SP what they see on their end for the RFC2833 packets - you can send them a wireshark capture off the UC500 WAN port if that is more convincing than a debug log. Who is the SP by the way?

Sound doesn't work for earphones unless on "Volume Limit" page. Why?

The sound for my ipod nano won't work when I plug in my earphones, unless I'm on "Settings" --> "Playback" --> "Volume Limit". But the speakers play the music perfectly when I unplug my earphones. And yes, I've tried using multiple different earphones, to make sure my earphones aren't broken. Wonder if anyone else has had this problem? I've tried "resetting" the ipod many times, but that doesn't help either.

Okay, so in frustration I finally methodically tried the following:
1.) Uninstalling the driver and selecting to delete the driver file
2.) Restarting the machine
3.) Installing the new driver
I repeated this until I'd tried all of the following drivers:
Windows 7 32bit, Cirrus Logic - Failed
Windows 7 64bit, Cirrus Logic - Failed
Windows 7 32bit, RealTek - Failed, * - Yes, I know the device is Cirrus, but I wanted to be thorough
Windows 7 64bit, RealTek - Failed
Then I did the same equivalent run through for Vista.
Then, in irritation, I did the same but for Windows XP.
Solution: The Windows XP Cirrus Logic driver worked perfectly.

Vibrate Mode only works for phone calls -- Solution.

So, I'm sure I'm not the only person who didn't realize that the vibrate mode doesn't turn on vibration for message and app notifications.
I was having an issue where whenever I had the phone on vibrate, I was not getting notified for text messages.
I googled this, and a lot of people had the same issue. Basically, the phone would behave like it was on silent whenever a text message or other notification was recieved.
In order to fix this for text messages/voice mail - open up your messages, hit the menu button, then settings, and verify your preferences for vibration are selected.
Each Vibrate option is under the Recieved Messages, Sent Messages, and Voicemail Notification Settings.
I've noticed that every single app has it's own vibrate setting, so you have to individually go through and change them if you want vibration notifications. I don't believe they will shut off when your phone is on audible (if you're worried about battery life). I think it's only an on or off type of deal.
Anyway, hope this helps. It's given me more than a week of frustration.

Glad you posted this, I'm sure a lot of people have had this issue. Every android I've owned is like this, took me forever to figure it out the first time.

Microphone doesnt work for phone calls

But it does for every other app that needs it, like snapchat voice memo instagram etc..
any ideas on how i can fix this without going in to the apple store and being ripped off?

The hands free mic is the upper mic and should be working fine. Otherwise the logic board is faulty. If you can only perform hands free calls, then the lower mic is faulty. The replacement part is the iPhone charging port with flex cable and lower mic, about $5 part.

IPad 2 sound doesn't work... The alarms work just sound to everything else..any ideas?, iPad 2 sound doesn't work... The alarms work just sound to everything else..any ideas?

My sound doesn't work for anything but the alarms work.. Any ideas

Did you check the switch on the side, next to the volume controls? Is it set to turn off the sound in Settings/General/Side switch?
Can you hear sound if you change the settings for your ringtone for example?

TS1363 i need to sync my iphone as its damaged ( water submersion) i can't though as itunes is asking me for my passcode and my screen doesn't work, the phones on though still ringing etc ... Please help

I need to sync my iphone as its damaged ( water submersion) i can't though as itunes is asking me for my passcode and my screen doesn't work, the phones on though still ringing etc ... Please help

You need to do more research before you make purchases like this. You've wasted your money. The ONLY officially unlocked iPhone model sold in the US is the GSM model, and that model is only sold by Apple. That's the model iPhone you should have purchased.
Did you read & understand my initial post? Especially this part:
The unlocking of the GSM portion is just for International travel in order to use local sims. You still have to pay Sprint for the use of their international GSM partner’s network on a “pay as you go basis”.

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

I'm having problems with facebook notifications. The sound doesn't work but shows up in banner. Any suggestions? I've tried everything but restoring. Is it a phone problem or an app problem?

I am having a problem with facebook notifications. The sound doesn't work but appears as a banner. I've tried everything but restoring the phone. Is this a phone problem or an app problem? Has anybody experienced this problem and were they able to correct it?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Ringer Sound doesn't work for phone calls.

Similar Messages

Maybe you are looking for